Merge 5.10.134 into android12-5.10-lts

Changes in 5.10.134
	pinctrl: stm32: fix optional IRQ support to gpios
	riscv: add as-options for modules with assembly compontents
	mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
	lockdown: Fix kexec lockdown bypass with ima policy
	io_uring: Use original task for req identity in io_identity_cow()
	xen/gntdev: Ignore failure to unmap INVALID_GRANT_HANDLE
	docs: net: explain struct net_device lifetime
	net: make free_netdev() more lenient with unregistering devices
	net: make sure devices go through netdev_wait_all_refs
	net: move net_set_todo inside rollback_registered()
	net: inline rollback_registered()
	net: move rollback_registered_many()
	net: inline rollback_registered_many()
	Revert "m68knommu: only set CONFIG_ISA_DMA_API for ColdFire sub-arch"
	PCI: hv: Fix multi-MSI to allow more than one MSI vector
	PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
	PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
	PCI: hv: Fix interrupt mapping for multi-MSI
	serial: mvebu-uart: correctly report configured baudrate value
	xfrm: xfrm_policy: fix a possible double xfrm_pols_put() in xfrm_bundle_lookup()
	power/reset: arm-versatile: Fix refcount leak in versatile_reboot_probe
	pinctrl: ralink: Check for null return of devm_kcalloc
	perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
	drm/amdgpu/display: add quirk handling for stutter mode
	igc: Reinstate IGC_REMOVED logic and implement it properly
	ip: Fix data-races around sysctl_ip_no_pmtu_disc.
	ip: Fix data-races around sysctl_ip_fwd_use_pmtu.
	ip: Fix data-races around sysctl_ip_fwd_update_priority.
	ip: Fix data-races around sysctl_ip_nonlocal_bind.
	ip: Fix a data-race around sysctl_ip_autobind_reuse.
	ip: Fix a data-race around sysctl_fwmark_reflect.
	tcp/dccp: Fix a data-race around sysctl_tcp_fwmark_accept.
	tcp: Fix data-races around sysctl_tcp_mtu_probing.
	tcp: Fix data-races around sysctl_tcp_base_mss.
	tcp: Fix data-races around sysctl_tcp_min_snd_mss.
	tcp: Fix a data-race around sysctl_tcp_mtu_probe_floor.
	tcp: Fix a data-race around sysctl_tcp_probe_threshold.
	tcp: Fix a data-race around sysctl_tcp_probe_interval.
	net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow
	i2c: cadence: Change large transfer count reset logic to be unconditional
	net: stmmac: fix dma queue left shift overflow issue
	net/tls: Fix race in TLS device down flow
	igmp: Fix data-races around sysctl_igmp_llm_reports.
	igmp: Fix a data-race around sysctl_igmp_max_memberships.
	igmp: Fix data-races around sysctl_igmp_max_msf.
	tcp: Fix data-races around keepalive sysctl knobs.
	tcp: Fix data-races around sysctl_tcp_syncookies.
	tcp: Fix data-races around sysctl_tcp_reordering.
	tcp: Fix data-races around some timeout sysctl knobs.
	tcp: Fix a data-race around sysctl_tcp_notsent_lowat.
	tcp: Fix a data-race around sysctl_tcp_tw_reuse.
	tcp: Fix data-races around sysctl_max_syn_backlog.
	tcp: Fix data-races around sysctl_tcp_fastopen.
	tcp: Fix data-races around sysctl_tcp_fastopen_blackhole_timeout.
	iavf: Fix handling of dummy receive descriptors
	i40e: Fix erroneous adapter reinitialization during recovery process
	ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero
	gpio: pca953x: only use single read/write for No AI mode
	gpio: pca953x: use the correct range when do regmap sync
	gpio: pca953x: use the correct register address when regcache sync during init
	be2net: Fix buffer overflow in be_get_module_eeprom
	drm/imx/dcss: Add missing of_node_put() in fail path
	ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
	ip: Fix data-races around sysctl_ip_prot_sock.
	udp: Fix a data-race around sysctl_udp_l3mdev_accept.
	tcp: Fix data-races around sysctl knobs related to SYN option.
	tcp: Fix a data-race around sysctl_tcp_early_retrans.
	tcp: Fix data-races around sysctl_tcp_recovery.
	tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
	tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
	tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
	tcp: Fix a data-race around sysctl_tcp_stdurg.
	tcp: Fix a data-race around sysctl_tcp_rfc1337.
	tcp: Fix data-races around sysctl_tcp_max_reordering.
	spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
	KVM: Don't null dereference ops->destroy
	mm/mempolicy: fix uninit-value in mpol_rebind_policy()
	bpf: Make sure mac_header was set before using it
	sched/deadline: Fix BUG_ON condition for deboosted tasks
	x86/bugs: Warn when "ibrs" mitigation is selected on Enhanced IBRS parts
	dlm: fix pending remove if msg allocation fails
	drm/imx/dcss: fix unused but set variable warnings
	bitfield.h: Fix "type of reg too small for mask" test
	ALSA: memalloc: Align buffer allocations in page size
	Bluetooth: Add bt_skb_sendmsg helper
	Bluetooth: Add bt_skb_sendmmsg helper
	Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsg
	Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg
	Bluetooth: Fix passing NULL to PTR_ERR
	Bluetooth: SCO: Fix sco_send_frame returning skb->len
	Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks
	x86/amd: Use IBPB for firmware calls
	x86/alternative: Report missing return thunk details
	watchqueue: make sure to serialize 'wqueue->defunct' properly
	tty: drivers/tty/, stop using tty_schedule_flip()
	tty: the rest, stop using tty_schedule_flip()
	tty: drop tty_schedule_flip()
	tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
	tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
	net: usb: ax88179_178a needs FLAG_SEND_ZLP
	watch-queue: remove spurious double semicolon
	Linux 5.10.134

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I55defdcdd6658e3ec9a3684b7e8cdfe114772a19

Documentation/networking/netdevices.rst

@@ -10,18 +10,177 @@ Introduction
 The following is a random collection of documentation regarding
 network devices.
 
-struct net_device allocation rules
-==================================
+struct net_device lifetime rules
+================================
 Network device structures need to persist even after module is unloaded and
 must be allocated with alloc_netdev_mqs() and friends.
 If device has registered successfully, it will be freed on last use
-by free_netdev(). This is required to handle the pathologic case cleanly
-(example: rmmod mydriver </sys/class/net/myeth/mtu )
+by free_netdev(). This is required to handle the pathological case cleanly
+(example: ``rmmod mydriver </sys/class/net/myeth/mtu``)
 
-alloc_netdev_mqs()/alloc_netdev() reserve extra space for driver
+alloc_netdev_mqs() / alloc_netdev() reserve extra space for driver
 private data which gets freed when the network device is freed. If
 separately allocated data is attached to the network device
-(netdev_priv(dev)) then it is up to the module exit handler to free that.
+(netdev_priv()) then it is up to the module exit handler to free that.
+
+There are two groups of APIs for registering struct net_device.
+First group can be used in normal contexts where ``rtnl_lock`` is not already
+held: register_netdev(), unregister_netdev().
+Second group can be used when ``rtnl_lock`` is already held:
+register_netdevice(), unregister_netdevice(), free_netdevice().
+
+Simple drivers
+--------------
+
+Most drivers (especially device drivers) handle lifetime of struct net_device
+in context where ``rtnl_lock`` is not held (e.g. driver probe and remove paths).
+
+In that case the struct net_device registration is done using
+the register_netdev(), and unregister_netdev() functions:
+
+.. code-block:: c
+
+  int probe()
+  {
+    struct my_device_priv *priv;
+    int err;
+
+    dev = alloc_netdev_mqs(...);
+    if (!dev)
+      return -ENOMEM;
+    priv = netdev_priv(dev);
+
+    /* ... do all device setup before calling register_netdev() ...
+     */
+
+    err = register_netdev(dev);
+    if (err)
+      goto err_undo;
+
+    /* net_device is visible to the user! */
+
+  err_undo:
+    /* ... undo the device setup ... */
+    free_netdev(dev);
+    return err;
+  }
+
+  void remove()
+  {
+    unregister_netdev(dev);
+    free_netdev(dev);
+  }
+
+Note that after calling register_netdev() the device is visible in the system.
+Users can open it and start sending / receiving traffic immediately,
+or run any other callback, so all initialization must be done prior to
+registration.
+
+unregister_netdev() closes the device and waits for all users to be done
+with it. The memory of struct net_device itself may still be referenced
+by sysfs but all operations on that device will fail.
+
+free_netdev() can be called after unregister_netdev() returns on when
+register_netdev() failed.
+
+Device management under RTNL
+----------------------------
+
+Registering struct net_device while in context which already holds
+the ``rtnl_lock`` requires extra care. In those scenarios most drivers
+will want to make use of struct net_device's ``needs_free_netdev``
+and ``priv_destructor`` members for freeing of state.
+
+Example flow of netdev handling under ``rtnl_lock``:
+
+.. code-block:: c
+
+  static void my_setup(struct net_device *dev)
+  {
+    dev->needs_free_netdev = true;
+  }
+
+  static void my_destructor(struct net_device *dev)
+  {
+    some_obj_destroy(priv->obj);
+    some_uninit(priv);
+  }
+
+  int create_link()
+  {
+    struct my_device_priv *priv;
+    int err;
+
+    ASSERT_RTNL();
+
+    dev = alloc_netdev(sizeof(*priv), "net%d", NET_NAME_UNKNOWN, my_setup);
+    if (!dev)
+      return -ENOMEM;
+    priv = netdev_priv(dev);
+
+    /* Implicit constructor */
+    err = some_init(priv);
+    if (err)
+      goto err_free_dev;
+
+    priv->obj = some_obj_create();
+    if (!priv->obj) {
+      err = -ENOMEM;
+      goto err_some_uninit;
+    }
+    /* End of constructor, set the destructor: */
+    dev->priv_destructor = my_destructor;
+
+    err = register_netdevice(dev);
+    if (err)
+      /* register_netdevice() calls destructor on failure */
+      goto err_free_dev;
+
+    /* If anything fails now unregister_netdevice() (or unregister_netdev())
+     * will take care of calling my_destructor and free_netdev().
+     */
+
+    return 0;
+
+  err_some_uninit:
+    some_uninit(priv);
+  err_free_dev:
+    free_netdev(dev);
+    return err;
+  }
+
+If struct net_device.priv_destructor is set it will be called by the core
+some time after unregister_netdevice(), it will also be called if
+register_netdevice() fails. The callback may be invoked with or without
+``rtnl_lock`` held.
+
+There is no explicit constructor callback, driver "constructs" the private
+netdev state after allocating it and before registration.
+
+Setting struct net_device.needs_free_netdev makes core call free_netdevice()
+automatically after unregister_netdevice() when all references to the device
+are gone. It only takes effect after a successful call to register_netdevice()
+so if register_netdevice() fails driver is responsible for calling
+free_netdev().
+
+free_netdev() is safe to call on error paths right after unregister_netdevice()
+or when register_netdevice() fails. Parts of netdev (de)registration process
+happen after ``rtnl_lock`` is released, therefore in those cases free_netdev()
+will defer some of the processing until ``rtnl_lock`` is released.
+
+Devices spawned from struct rtnl_link_ops should never free the
+struct net_device directly.
+
+.ndo_init and .ndo_uninit
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``.ndo_init`` and ``.ndo_uninit`` callbacks are called during net_device
+registration and de-registration, under ``rtnl_lock``. Drivers can use
+those e.g. when parts of their init process need to run under ``rtnl_lock``.
+
+``.ndo_init`` runs before device is visible in the system, ``.ndo_uninit``
+runs during de-registering after device is closed but other subsystems
+may still have outstanding references to the netdevice.
 
 MTU
 ===

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 133
+SUBLEVEL = 134
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/alpha/kernel/srmcons.c

@@ -59,7 +59,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }

arch/m68k/Kconfig.bus

@@ -63,7 +63,7 @@ source "drivers/zorro/Kconfig"
 
 endif
 
-if COLDFIRE
+if !MMU
 
 config ISA_DMA_API
 	def_bool !M5272

arch/riscv/Makefile

@@ -73,6 +73,7 @@ ifeq ($(CONFIG_PERF_EVENTS),y)
 endif
 
 KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax)
+KBUILD_AFLAGS_MODULE += $(call as-option,-Wa$(comma)-mno-relax)
 
 # GCC versions that support the "-mstrict-align" option default to allowing
 # unaligned accesses.  While unaligned accesses are explicitly allowed in the

arch/x86/include/asm/cpufeatures.h

@@ -298,6 +298,7 @@
 #define X86_FEATURE_RETPOLINE_LFENCE	(11*32+13) /* "" Use LFENCE for Spectre variant 2 */
 #define X86_FEATURE_RETHUNK		(11*32+14) /* "" Use REturn THUNK */
 #define X86_FEATURE_UNRET		(11*32+15) /* "" AMD BTB untrain return */
+#define X86_FEATURE_USE_IBPB_FW		(11*32+16) /* "" Use IBPB during runtime firmware calls */
 
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX512_BF16		(12*32+ 5) /* AVX512 BFLOAT16 instructions */

arch/x86/include/asm/mshyperv.h

@@ -247,13 +247,6 @@ bool hv_vcpu_is_preempted(int vcpu);
 static inline void hv_apic_init(void) {}
 #endif
 
-static inline void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
-					      struct msi_desc *msi_desc)
-{
-	msi_entry->address = msi_desc->msg.address_lo;
-	msi_entry->data = msi_desc->msg.data;
-}
-
 #else /* CONFIG_HYPERV */
 static inline void hyperv_init(void) {}
 static inline void hyperv_setup_mmu_ops(void) {}

arch/x86/include/asm/nospec-branch.h

@@ -298,6 +298,8 @@ do {									\
 	alternative_msr_write(MSR_IA32_SPEC_CTRL,			\
 			      spec_ctrl_current() | SPEC_CTRL_IBRS,	\
 			      X86_FEATURE_USE_IBRS_FW);			\
+	alternative_msr_write(MSR_IA32_PRED_CMD, PRED_CMD_IBPB,		\
+			      X86_FEATURE_USE_IBPB_FW);			\
 } while (0)
 
 #define firmware_restrict_branch_speculation_end()			\

arch/x86/kernel/alternative.c

@@ -709,7 +709,9 @@ void __init_or_module noinline apply_returns(s32 *start, s32 *end)
 			dest = addr + insn.length + insn.immediate.value;
 
 		if (__static_call_fixup(addr, op, dest) ||
-		    WARN_ON_ONCE(dest != &__x86_return_thunk))
+		    WARN_ONCE(dest != &__x86_return_thunk,
+			      "missing return thunk: %pS-%pS: %*ph",
+			      addr, dest, 5, addr))
 			continue;
 
 		DPRINTK("return thunk at: %pS (%px) len: %d to: %pS",

arch/x86/kernel/cpu/bugs.c

@@ -931,6 +931,7 @@ static inline const char *spectre_v2_module_string(void) { return ""; }
 #define SPECTRE_V2_LFENCE_MSG "WARNING: LFENCE mitigation is not recommended for this CPU, data leaks possible!\n"
 #define SPECTRE_V2_EIBRS_EBPF_MSG "WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!\n"
 #define SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG "WARNING: Unprivileged eBPF is enabled with eIBRS+LFENCE mitigation and SMT, data leaks possible via Spectre v2 BHB attacks!\n"
+#define SPECTRE_V2_IBRS_PERF_MSG "WARNING: IBRS mitigation selected on Enhanced IBRS CPU, this may cause unnecessary performance loss\n"
 
 #ifdef CONFIG_BPF_SYSCALL
 void unpriv_ebpf_notify(int new_state)
@@ -1371,6 +1372,8 @@ static void __init spectre_v2_select_mitigation(void)
 
 	case SPECTRE_V2_IBRS:
 		setup_force_cpu_cap(X86_FEATURE_KERNEL_IBRS);
+		if (boot_cpu_has(X86_FEATURE_IBRS_ENHANCED))
+			pr_warn(SPECTRE_V2_IBRS_PERF_MSG);
 		break;
 
 	case SPECTRE_V2_LFENCE:
@@ -1472,7 +1475,16 @@ static void __init spectre_v2_select_mitigation(void)
 	 * the CPU supports Enhanced IBRS, kernel might un-intentionally not
 	 * enable IBRS around firmware calls.
 	 */
-	if (boot_cpu_has(X86_FEATURE_IBRS) && !spectre_v2_in_ibrs_mode(mode)) {
+	if (boot_cpu_has_bug(X86_BUG_RETBLEED) &&
+	    (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
+	     boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)) {
+
+		if (retbleed_cmd != RETBLEED_CMD_IBPB) {
+			setup_force_cpu_cap(X86_FEATURE_USE_IBPB_FW);
+			pr_info("Enabling Speculation Barrier for firmware calls\n");
+		}
+
+	} else if (boot_cpu_has(X86_FEATURE_IBRS) && !spectre_v2_in_ibrs_mode(mode)) {
 		setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW);
 		pr_info("Enabling Restricted Speculation for firmware calls\n");
 	}

drivers/accessibility/speakup/spk_ttyio.c

@@ -88,7 +88,7 @@ static int spk_ttyio_receive_buf2(struct tty_struct *tty,
 	}
 
 	if (!ldisc_data->buf_free)
-		/* ttyio_in will tty_schedule_flip */
+		/* ttyio_in will tty_flip_buffer_push */
 		return 0;
 
 	/* Make sure the consumer has read buf before we have seen
@@ -334,7 +334,7 @@ static unsigned char ttyio_in(int timeout)
 	mb();
 	ldisc_data->buf_free = true;
 	/* Let TTY push more characters */
-	tty_schedule_flip(speakup_tty->port);
+	tty_flip_buffer_push(speakup_tty->port);
 
 	return rv;
 }

drivers/gpio/gpio-pca953x.c

@@ -350,6 +350,9 @@ static const struct regmap_config pca953x_i2c_regmap = {
 	.reg_bits = 8,
 	.val_bits = 8,
 
+	.use_single_read = true,
+	.use_single_write = true,
+
 	.readable_reg = pca953x_readable_register,
 	.writeable_reg = pca953x_writeable_register,
 	.volatile_reg = pca953x_volatile_register,
@@ -893,15 +896,18 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
 {
 	DECLARE_BITMAP(val, MAX_LINE);
+	u8 regaddr;
 	int ret;
 
-	ret = regcache_sync_region(chip->regmap, chip->regs->output,
-				   chip->regs->output + NBANK(chip));
+	regaddr = pca953x_recalc_addr(chip, chip->regs->output, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr,
+				   regaddr + NBANK(chip) - 1);
 	if (ret)
 		goto out;
 
-	ret = regcache_sync_region(chip->regmap, chip->regs->direction,
-				   chip->regs->direction + NBANK(chip));
+	regaddr = pca953x_recalc_addr(chip, chip->regs->direction, 0);
+	ret = regcache_sync_region(chip->regmap, regaddr,
+				   regaddr + NBANK(chip) - 1);
 	if (ret)
 		goto out;
 
@@ -1114,14 +1120,14 @@ static int pca953x_regcache_sync(struct device *dev)
 	 * sync these registers first and only then sync the rest.
 	 */
 	regaddr = pca953x_recalc_addr(chip, chip->regs->direction, 0);
-	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip));
+	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
 	if (ret) {
 		dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
 		return ret;
 	}
 
 	regaddr = pca953x_recalc_addr(chip, chip->regs->output, 0);
-	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip));
+	ret = regcache_sync_region(chip->regmap, regaddr, regaddr + NBANK(chip) - 1);
 	if (ret) {
 		dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
 		return ret;
@@ -1131,7 +1137,7 @@ static int pca953x_regcache_sync(struct device *dev)
 	if (chip->driver_data & PCA_PCAL) {
 		regaddr = pca953x_recalc_addr(chip, PCAL953X_IN_LATCH, 0);
 		ret = regcache_sync_region(chip->regmap, regaddr,
-					   regaddr + NBANK(chip));
+					   regaddr + NBANK(chip) - 1);
 		if (ret) {
 			dev_err(dev, "Failed to sync INT latch registers: %d\n",
 				ret);
@@ -1140,7 +1146,7 @@ static int pca953x_regcache_sync(struct device *dev)
 
 		regaddr = pca953x_recalc_addr(chip, PCAL953X_INT_MASK, 0);
 		ret = regcache_sync_region(chip->regmap, regaddr,
-					   regaddr + NBANK(chip));
+					   regaddr + NBANK(chip) - 1);
 		if (ret) {
 			dev_err(dev, "Failed to sync INT mask registers: %d\n",
 				ret);

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -922,6 +922,37 @@ static void amdgpu_check_debugfs_connector_property_change(struct amdgpu_device
 	}
 }
 
+struct amdgpu_stutter_quirk {
+	u16 chip_vendor;
+	u16 chip_device;
+	u16 subsys_vendor;
+	u16 subsys_device;
+	u8 revision;
+};
+
+static const struct amdgpu_stutter_quirk amdgpu_stutter_quirk_list[] = {
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=214417 */
+	{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc8 },
+	{ 0, 0, 0, 0, 0 },
+};
+
+static bool dm_should_disable_stutter(struct pci_dev *pdev)
+{
+	const struct amdgpu_stutter_quirk *p = amdgpu_stutter_quirk_list;
+
+	while (p && p->chip_device != 0) {
+		if (pdev->vendor == p->chip_vendor &&
+		    pdev->device == p->chip_device &&
+		    pdev->subsystem_vendor == p->subsys_vendor &&
+		    pdev->subsystem_device == p->subsys_device &&
+		    pdev->revision == p->revision) {
+			return true;
+		}
+		++p;
+	}
+	return false;
+}
+
 static int amdgpu_dm_init(struct amdgpu_device *adev)
 {
 	struct dc_init_data init_data;
@@ -1014,6 +1045,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 
 	if (adev->asic_type != CHIP_CARRIZO && adev->asic_type != CHIP_STONEY)
 		adev->dm.dc->debug.disable_stutter = amdgpu_pp_feature_mask & PP_STUTTER_MODE ? false : true;
+	if (dm_should_disable_stutter(adev->pdev))
+		adev->dm.dc->debug.disable_stutter = true;
 
 	if (amdgpu_dc_debug_mask & DC_DISABLE_STUTTER)
 		adev->dm.dc->debug.disable_stutter = true;

drivers/gpu/drm/imx/dcss/dcss-dev.c

@@ -207,6 +207,7 @@ struct dcss_dev *dcss_dev_create(struct device *dev, bool hdmi_output)
 
 	ret = dcss_submodules_init(dcss);
 	if (ret) {
+		of_node_put(dcss->of_port);
 		dev_err(dev, "submodules initialization failed\n");
 		goto clks_err;
 	}
@@ -237,6 +238,8 @@ void dcss_dev_destroy(struct dcss_dev *dcss)
 		dcss_clocks_disable(dcss);
 	}
 
+	of_node_put(dcss->of_port);
+
 	pm_runtime_disable(dcss->dev);
 
 	dcss_submodules_stop(dcss);

drivers/gpu/drm/imx/dcss/dcss-plane.c

@@ -268,7 +268,6 @@ static void dcss_plane_atomic_update(struct drm_plane *plane,
 	struct dcss_plane *dcss_plane = to_dcss_plane(plane);
 	struct dcss_dev *dcss = plane->dev->dev_private;
 	struct drm_framebuffer *fb = state->fb;
-	u32 pixel_format;
 	struct drm_crtc_state *crtc_state;
 	bool modifiers_present;
 	u32 src_w, src_h, dst_w, dst_h;
@@ -279,7 +278,6 @@ static void dcss_plane_atomic_update(struct drm_plane *plane,
 	if (!fb || !state->crtc || !state->visible)
 		return;
 
-	pixel_format = state->fb->format->format;
 	crtc_state = state->crtc->state;
 	modifiers_present = !!(fb->flags & DRM_MODE_FB_MODIFIERS);
 

drivers/i2c/busses/i2c-cadence.c

@@ -386,9 +386,9 @@ static irqreturn_t cdns_i2c_slave_isr(void *ptr)
  */
 static irqreturn_t cdns_i2c_master_isr(void *ptr)
 {
-	unsigned int isr_status, avail_bytes, updatetx;
+	unsigned int isr_status, avail_bytes;
 	unsigned int bytes_to_send;
-	bool hold_quirk;
+	bool updatetx;
 	struct cdns_i2c *id = ptr;
 	/* Signal completion only after everything is updated */
 	int done_flag = 0;
@@ -408,11 +408,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 	 * Check if transfer size register needs to be updated again for a
 	 * large data receive operation.
 	 */
-	updatetx = 0;
-	if (id->recv_count > id->curr_recv_count)
-		updatetx = 1;
-
-	hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx;
+	updatetx = id->recv_count > id->curr_recv_count;
 
 	/* When receiving, handle data interrupt and completion interrupt */
 	if (id->p_recv_buf &&
@@ -443,7 +439,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 				break;
 			}
 
-			if (cdns_is_holdquirk(id, hold_quirk))
+			if (cdns_is_holdquirk(id, updatetx))
 				break;
 		}
 
@@ -454,7 +450,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 		 * maintain transfer size non-zero while performing a large
 		 * receive operation.
 		 */
-		if (cdns_is_holdquirk(id, hold_quirk)) {
+		if (cdns_is_holdquirk(id, updatetx)) {
 			/* wait while fifo is full */
 			while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
 			       (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
@@ -476,22 +472,6 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 						  CDNS_I2C_XFER_SIZE_OFFSET);
 				id->curr_recv_count = id->recv_count;
 			}
-		} else if (id->recv_count && !hold_quirk &&
-						!id->curr_recv_count) {
-
-			/* Set the slave address in address register*/
-			cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
-						CDNS_I2C_ADDR_OFFSET);
-
-			if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
-				cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
-						CDNS_I2C_XFER_SIZE_OFFSET);
-				id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
-			} else {
-				cdns_i2c_writereg(id->recv_count,
-						CDNS_I2C_XFER_SIZE_OFFSET);
-				id->curr_recv_count = id->recv_count;
-			}
 		}
 
 		/* Clear hold (if not repeated start) and signal completion */

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c

@@ -1235,8 +1235,8 @@ static struct sock *chtls_recv_sock(struct sock *lsk,
 	csk->sndbuf = newsk->sk_sndbuf;
 	csk->smac_idx = ((struct port_info *)netdev_priv(ndev))->smt_idx;
 	RCV_WSCALE(tp) = select_rcv_wscale(tcp_full_space(newsk),
-					   sock_net(newsk)->
-						ipv4.sysctl_tcp_window_scaling,
+					   READ_ONCE(sock_net(newsk)->
+						     ipv4.sysctl_tcp_window_scaling),
 					   tp->window_clamp);
 	neigh_release(n);
 	inet_inherit_port(&tcp_hashinfo, lsk, newsk);
@@ -1383,7 +1383,7 @@ static void chtls_pass_accept_request(struct sock *sk,
 #endif
 	}
 	if (req->tcpopt.wsf <= 14 &&
-	    sock_net(sk)->ipv4.sysctl_tcp_window_scaling) {
+	    READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_window_scaling)) {
 		inet_rsk(oreq)->wscale_ok = 1;
 		inet_rsk(oreq)->snd_wscale = req->tcpopt.wsf;
 	}

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -2287,7 +2287,7 @@ err:
 
 /* Uses sync mcc */
 int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
-				      u8 page_num, u8 *data)
+				      u8 page_num, u32 off, u32 len, u8 *data)
 {
 	struct be_dma_mem cmd;
 	struct be_mcc_wrb *wrb;
@@ -2321,10 +2321,10 @@ int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
 	req->port = cpu_to_le32(adapter->hba_port_num);
 	req->page_num = cpu_to_le32(page_num);
 	status = be_mcc_notify_wait(adapter);
-	if (!status) {
+	if (!status && len > 0) {
 		struct be_cmd_resp_port_type *resp = cmd.va;
 
-		memcpy(data, resp->page_data, PAGE_DATA_LEN);
+		memcpy(data, resp->page_data + off, len);
 	}
 err:
 	mutex_unlock(&adapter->mcc_lock);
@@ -2415,7 +2415,7 @@ int be_cmd_query_cable_type(struct be_adapter *adapter)
 	int status;
 
 	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
-						   page_data);
+						   0, PAGE_DATA_LEN, page_data);
 	if (!status) {
 		switch (adapter->phy.interface_type) {
 		case PHY_TYPE_QSFP:
@@ -2440,7 +2440,7 @@ int be_cmd_query_sfp_info(struct be_adapter *adapter)
 	int status;
 
 	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
-						   page_data);
+						   0, PAGE_DATA_LEN, page_data);
 	if (!status) {
 		strlcpy(adapter->phy.vendor_name, page_data +
 			SFP_VENDOR_NAME_OFFSET, SFP_VENDOR_NAME_LEN - 1);

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -2427,7 +2427,7 @@ int be_cmd_set_beacon_state(struct be_adapter *adapter, u8 port_num, u8 beacon,
 int be_cmd_get_beacon_state(struct be_adapter *adapter, u8 port_num,
 			    u32 *state);
 int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
-				      u8 page_num, u8 *data);
+				      u8 page_num, u32 off, u32 len, u8 *data);
 int be_cmd_query_cable_type(struct be_adapter *adapter);
 int be_cmd_query_sfp_info(struct be_adapter *adapter);
 int lancer_cmd_read_object(struct be_adapter *adapter, struct be_dma_mem *cmd,

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -1338,7 +1338,7 @@ static int be_get_module_info(struct net_device *netdev,
 		return -EOPNOTSUPP;
 
 	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
-						   page_data);
+						   0, PAGE_DATA_LEN, page_data);
 	if (!status) {
 		if (!page_data[SFP_PLUS_SFF_8472_COMP]) {
 			modinfo->type = ETH_MODULE_SFF_8079;
@@ -1356,25 +1356,32 @@ static int be_get_module_eeprom(struct net_device *netdev,
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	int status;
+	u32 begin, end;
 
 	if (!check_privilege(adapter, MAX_PRIVILEGES))
 		return -EOPNOTSUPP;
 
-	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
-						   data);
-	if (status)
-		goto err;
+	begin = eeprom->offset;
+	end = eeprom->offset + eeprom->len;
 
-	if (eeprom->offset + eeprom->len > PAGE_DATA_LEN) {
-		status = be_cmd_read_port_transceiver_data(adapter,
-							   TR_PAGE_A2,
-							   data +
-							   PAGE_DATA_LEN);
+	if (begin < PAGE_DATA_LEN) {
+		status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0, begin,
+							   min_t(u32, end, PAGE_DATA_LEN) - begin,
+							   data);
+		if (status)
+			goto err;
+
+		data += PAGE_DATA_LEN - begin;
+		begin = PAGE_DATA_LEN;
+	}
+
+	if (end > PAGE_DATA_LEN) {
+		status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A2,
+							   begin - PAGE_DATA_LEN,
+							   end - begin, data);
 		if (status)
 			goto err;
 	}
-	if (eeprom->offset)
-		memcpy(data, data + eeprom->offset, eeprom->len);
 err:
 	return be_cmd_status(status);
 }