ASOC: Add ADAU7118 8 Channel PDM-to-I2S/TDM Converter driver

This patch adds support for the 8 channel PDM-to-I2S/TDM converter. The
ADAU7118 converts four stereo pulse density modulation (PDM) bitstreams
into one pulse code modulation (PCM) output stream. The source for the PDM
data can be eight microphones or other PDM sources. The PCM audio data is
output on a serial audio interface port in either inter-IC serial (I2S) or
time domain multiplexed (TDM) format.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191010074234.7344-1-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

MAINTAINERS

@@ -1002,6 +1002,7 @@ F:	drivers/media/i2c/adv7842*
 
 ANALOG DEVICES INC ASOC CODEC DRIVERS
 M:	Lars-Peter Clausen <lars@metafoo.de>
+M:	Nuno Sá <nuno.sa@analog.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://wiki.analog.com/
 W:	http://ez.analog.com/community/linux-device-drivers

sound/soc/codecs/Kconfig

@@ -34,6 +34,8 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_ADAU1977_I2C if I2C
 	select SND_SOC_ADAU1701 if I2C
 	select SND_SOC_ADAU7002
+	select SND_SOC_ADAU7118_I2C if I2C
+	select SND_SOC_ADAU7118_HW
 	select SND_SOC_ADS117X
 	select SND_SOC_AK4104 if SPI_MASTER
 	select SND_SOC_AK4118 if I2C
@@ -396,6 +398,32 @@ config SND_SOC_ADAU1977_I2C
 config SND_SOC_ADAU7002
 	tristate "Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter"
 
+config SND_SOC_ADAU7118
+	tristate
+
+config SND_SOC_ADAU7118_HW
+	tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - HW Mode"
+	select SND_SOC_ADAU7118
+	help
+	  Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
+	  Converter. In this mode, the device works in standalone mode which
+	  means that there is no bus to comunicate with it. Stereo mode is not
+	  supported in this mode.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-soc-adau7118-hw.
+
+config SND_SOC_ADAU7118_I2C
+	tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - I2C"
+	select SND_SOC_ADAU7118
+	select REGMAP_I2C
+	help
+	  Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
+	  Converter over I2C. This gives full support over the device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-soc-adau7118-i2c.
+
 config SND_SOC_ADAV80X
 	tristate
 

sound/soc/codecs/Makefile

@@ -22,6 +22,9 @@ snd-soc-adau1977-objs := adau1977.o
 snd-soc-adau1977-spi-objs := adau1977-spi.o
 snd-soc-adau1977-i2c-objs := adau1977-i2c.o
 snd-soc-adau7002-objs := adau7002.o
+snd-soc-adau7118-objs := adau7118.o
+snd-soc-adau7118-i2c-objs := adau7118-i2c.o
+snd-soc-adau7118-hw-objs := adau7118-hw.o
 snd-soc-adav80x-objs := adav80x.o
 snd-soc-adav801-objs := adav801.o
 snd-soc-adav803-objs := adav803.o
@@ -305,6 +308,9 @@ obj-$(CONFIG_SND_SOC_ADAU1977)		+= snd-soc-adau1977.o
 obj-$(CONFIG_SND_SOC_ADAU1977_SPI)	+= snd-soc-adau1977-spi.o
 obj-$(CONFIG_SND_SOC_ADAU1977_I2C)	+= snd-soc-adau1977-i2c.o
 obj-$(CONFIG_SND_SOC_ADAU7002)	+= snd-soc-adau7002.o
+obj-$(CONFIG_SND_SOC_ADAU7118)	+= snd-soc-adau7118.o
+obj-$(CONFIG_SND_SOC_ADAU7118_I2C)	+= snd-soc-adau7118-i2c.o
+obj-$(CONFIG_SND_SOC_ADAU7118_HW)	+= snd-soc-adau7118-hw.o
 obj-$(CONFIG_SND_SOC_ADAV80X)  += snd-soc-adav80x.o
 obj-$(CONFIG_SND_SOC_ADAV801)  += snd-soc-adav801.o
 obj-$(CONFIG_SND_SOC_ADAV803)  += snd-soc-adav803.o

sound/soc/codecs/adau7118-hw.c

@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Analog Devices ADAU7118 8 channel PDM-to-I2S/TDM Converter Standalone Hw
+// driver
+//
+// Copyright 2019 Analog Devices Inc.
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+
+#include "adau7118.h"
+
+static int adau7118_probe_hw(struct platform_device *pdev)
+{
+	return adau7118_probe(&pdev->dev, NULL, true);
+}
+
+static const struct of_device_id adau7118_of_match[] = {
+	{ .compatible = "adi,adau7118" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adau7118_of_match);
+
+static const struct platform_device_id adau7118_id[] = {
+	{ .name	= "adau7118" },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, adau7118_id);
+
+static struct platform_driver adau7118_driver_hw = {
+	.driver = {
+		.name = "adau7118",
+		.of_match_table = adau7118_of_match,
+	},
+	.probe = adau7118_probe_hw,
+	.id_table = adau7118_id,
+};
+module_platform_driver(adau7118_driver_hw);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("ADAU7118 8 channel PDM-to-I2S/TDM Converter driver for standalone hw mode");
+MODULE_LICENSE("GPL");

sound/soc/codecs/adau7118-i2c.c

@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Analog Devices ADAU7118 8 channel PDM-to-I2S/TDM Converter driver over I2C
+//
+// Copyright 2019 Analog Devices Inc.
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "adau7118.h"
+
+static const struct reg_default adau7118_reg_defaults[] = {
+	{ ADAU7118_REG_VENDOR_ID, 0x41 },
+	{ ADAU7118_REG_DEVICE_ID1, 0x71 },
+	{ ADAU7118_REG_DEVICE_ID2, 0x18 },
+	{ ADAU7118_REG_REVISION_ID, 0x00 },
+	{ ADAU7118_REG_ENABLES, 0x3F },
+	{ ADAU7118_REG_DEC_RATIO_CLK_MAP, 0xC0 },
+	{ ADAU7118_REG_HPF_CONTROL, 0xD0 },
+	{ ADAU7118_REG_SPT_CTRL1, 0x41 },
+	{ ADAU7118_REG_SPT_CTRL2, 0x00 },
+	{ ADAU7118_REG_SPT_CX(0), 0x01 },
+	{ ADAU7118_REG_SPT_CX(1), 0x11 },
+	{ ADAU7118_REG_SPT_CX(2), 0x21 },
+	{ ADAU7118_REG_SPT_CX(3), 0x31 },
+	{ ADAU7118_REG_SPT_CX(4), 0x41 },
+	{ ADAU7118_REG_SPT_CX(5), 0x51 },
+	{ ADAU7118_REG_SPT_CX(6), 0x61 },
+	{ ADAU7118_REG_SPT_CX(7), 0x71 },
+	{ ADAU7118_REG_DRIVE_STRENGTH, 0x2a },
+	{ ADAU7118_REG_RESET, 0x00 },
+};
+
+static const struct regmap_config adau7118_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_defaults = adau7118_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(adau7118_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = ADAU7118_REG_RESET,
+};
+
+static int adau7118_probe_i2c(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct regmap *map;
+
+	map = devm_regmap_init_i2c(i2c, &adau7118_regmap_config);
+	if (IS_ERR(map)) {
+		dev_err(&i2c->dev, "Failed to init regmap %ld\n", PTR_ERR(map));
+		return PTR_ERR(map);
+	}
+
+	return adau7118_probe(&i2c->dev, map, false);
+}
+
+static const struct of_device_id adau7118_of_match[] = {
+	{ .compatible = "adi,adau7118" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adau7118_of_match);
+
+static const struct i2c_device_id adau7118_id[] = {
+	{"adau7118", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adau7118_id);
+
+static struct i2c_driver adau7118_driver = {
+	.driver = {
+		.name = "adau7118",
+		.of_match_table = adau7118_of_match,
+	},
+	.probe = adau7118_probe_i2c,
+	.id_table = adau7118_id,
+};
+module_i2c_driver(adau7118_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("ADAU7118 8 channel PDM-to-I2S/TDM Converter driver over I2C");
+MODULE_LICENSE("GPL");

sound/soc/codecs/adau7118.h

@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_ADAU7118_H
+#define _LINUX_ADAU7118_H
+
+struct regmap;
+struct device;
+
+/* register map */
+#define ADAU7118_REG_VENDOR_ID		0x00
+#define ADAU7118_REG_DEVICE_ID1		0x01
+#define ADAU7118_REG_DEVICE_ID2		0x02
+#define ADAU7118_REG_REVISION_ID	0x03
+#define ADAU7118_REG_ENABLES		0x04
+#define ADAU7118_REG_DEC_RATIO_CLK_MAP	0x05
+#define ADAU7118_REG_HPF_CONTROL	0x06
+#define ADAU7118_REG_SPT_CTRL1		0x07
+#define ADAU7118_REG_SPT_CTRL2		0x08
+#define ADAU7118_REG_SPT_CX(num)	(0x09 + (num))
+#define ADAU7118_REG_DRIVE_STRENGTH	0x11
+#define ADAU7118_REG_RESET		0x12
+
+int adau7118_probe(struct device *dev, struct regmap *map, bool hw_mode);
+
+#endif