armbian/linux-rockchip
0
0
Fork 0
mirror of https://github.com/armbian/linux-rockchip.git synced 2026-01-06 11:08:10 -08:00
Code Issues Packages Projects Releases Wiki Activity

V4L/DVB (3376): Add cpia2 camera support

Browse Source 
There has been a CPIA2 driver out of kernel for a long time and it has
been pretty clean for some time too. This is an import of the
sourceforge driver which has been stripped of
- 2.4 back compatibility
- 2.4 old style MJPEG ioctls
A couple of functions have been made static and the docs have been
repackaged into Documentation/video4linux.  The rvmalloc/free functions now
match the cpia driver again.  Other than that this is the code as is.
Tested on x86-64 with a QX5 microscope.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Alan Cox
2006-02-27 00:09:05 -03:00
committed by Mauro Carvalho Chehab
parent f05cce863f
commit ab33d5071d
12 changed files with 6974 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

130
Documentation/video4linux/README.cpia2 Normal file
View File

@@ -0,0 +1,130 @@
$Id: README,v 1.7 2005/08/29 23:39:57 sbertin Exp $
1. Introduction
This is a driver for STMicroelectronics's CPiA2 (second generation
Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
stream at up to vga size. It implements the Video4Linux interface as much as
possible. Since the V4L interface does not support compressed formats, only
an mjpeg enabled application can be used with the camera. We have modified the
gqcam application to view this stream.
The driver is implemented as two kernel modules. The cpia2 module
contains the camera functions and the V4L interface. The cpia2_usb module
contains usb specific functions. The main reason for this was the size of the
module was getting out of hand, so I separted them. It is not likely that
there will be a parallel port version.
FEATURES:
- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
sensors. I only have the vga sensor, so can't test the other.
- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
VGA and QVGA are the native image sizes for the VGA camera. CIF is done
in the coprocessor by scaling QVGA. All other sizes are done by clipping.
- Palette: YCrCb, compressed with MJPEG.
- Some compression parameters are settable.
- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
- Adjust brightness, color, contrast while streaming.
- Flicker control settable for 50 or 60 Hz mains frequency.
2. Making and installing the stv672 driver modules:
Requirements:
-------------
This should work with 2.4 (2.4.23 and later) and 2.6 kernels, but has
only been tested on 2.6. Video4Linux must be either compiled into the kernel or
available as a module. Video4Linux2 is automatically detected and made
available at compile time.
Compiling:
----------
As root, do a make install. This will compile and install the modules
into the media/video directory in the module tree. For 2.4 kernels, use
Makefile_2.4 (aka do make -f Makefile_2.4 install).
Setup:
------
Use 'modprobe cpia2' to load and 'modprobe -r cpia2' to unload. This
may be done automatically by your distribution.
3. Driver options
Option Description
------ -----------
video_nr video device to register (0=/dev/video0, etc)
range -1 to 64. default is -1 (first available)
If you have more than 1 camera, this MUST be -1.
buffer_size Size for each frame buffer in bytes (default 68k)
num_buffers Number of frame buffers (1-32, default 3)
alternate USB Alternate (2-7, default 7)
flicker_freq Frequency for flicker reduction(50 or 60, default 60)
flicker_mode 0 to disable, or 1 to enable flicker reduction.
(default 0). This is only effective if the camera
uses a stv0672 coprocessor.
Setting the options:
--------------------
If you are using modules, edit /etc/modules.conf and add an options
line like this:
options cpia2 num_buffers=3 buffer_size=65535
If the driver is compiled into the kernel, at boot time specify them
like this:
cpia2=num_buffers:3,buffer_size:65535
What buffer size should I use?
------------------------------
The maximum image size depends on the alternate you choose, and the
frame rate achieved by the camera. If the compression engine is able to
keep up with the frame rate, the maximum image size is given by the table
below.
The compression engine starts out at maximum compression, and will
increase image quality until it is close to the size in the table. As long
as the compression engine can keep up with the frame rate, after a short time
the images will all be about the size in the table, regardless of resolution.
At low alternate settings, the compression engine may not be able to
compress the image enough and will reduce the frame rate by producing larger
images.
The default of 68k should be good for most users. This will handle
any alternate at frame rates down to 15fps. For lower frame rates, it may
be necessary to increase the buffer size to avoid having frames dropped due
to insufficient space.
Image size(bytes)
Alternate bytes/ms 15fps 30fps
2 128 8533 4267
3 384 25600 12800
4 640 42667 21333
5 768 51200 25600
6 896 59733 29867
7 1023 68200 34100
How many buffers should I use?
------------------------------
For normal streaming, 3 should give the best results. With only 2,
it is possible for the camera to finish sending one image just after a
program has started reading the other. If this happens, the driver must drop
a frame. The exception to this is if you have a heavily loaded machine. In
this case use 2 buffers. You are probably not reading at the full frame rate.
If the camera can send multiple images before a read finishes, it could
overwrite the third buffer before the read finishes, leading to a corrupt
image. Single and double buffering have extra checks to avoid overwriting.
4. Using the camera
We are providing a modified gqcam application to view the output. In
order to avoid confusion, here it is called mview. There is also the qx5view
program which can also control the lights on the qx5 microscope. MJPEG Tools
(http://mjpeg.sourceforge.net) can also be used to record from the camera.
5. Notes to developers:
- This is a driver version stripped of the 2.4 back compatibility
and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support.
6. Thanks:
- Peter Pregler <Peter_Pregler@email.com>,
Scott J. Bertin <scottbertin@yahoo.com>, and
Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
this one was modelled from.

38
Documentation/video4linux/cpia2_overview.txt Normal file
View File

@@ -0,0 +1,38 @@
Programmer's View of Cpia2
Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a
division of ST Microelectronics). There are two versions. The first is the
STV0672, which is capable of up to 30 frames per second (fps) in frame sizes
up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version,
which can handle up to 30 fps VGA. Both coprocessors can be attached to two
CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will
be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
The two chipsets operate almost identically. The core is an 8051 processor,
running two different versions of firmware. The 672 runs the VP4 video
processor code, the 676 runs VP5. There are a few differences in register
mappings for the two chips. In these cases, the symbols defined in the
header files are marked with VP4 or VP5 as part of the symbol name.
The cameras appear externally as three sets of registers. Setting register
values is the only way to control the camera. Some settings are
interdependant, such as the sequence required to power up the camera. I will
try to make note of all of these cases.
The register sets are called blocks. Block 0 is the system block. This
section is always powered on when the camera is plugged in. It contains
registers that control housekeeping functions such as powering up the video
processor. The video processor is the VP block. These registers control
how the video from the sensor is processed. Examples are timing registers,
user mode (vga, qvga), scaling, cropping, framerates, and so on. The last
block is the video compressor (VC). The video stream sent from the camera is
compressed as Motion JPEG (JPEGA). The VC controls all of the compression
parameters. Looking at the file cpia2_registers.h, you can get a full view
of these registers and the possible values for most of them.
One or more registers can be set or read by sending a usb control message to
the camera. There are three modes for this. Block mode requests a number
of contiguous registers. Random mode reads or writes random registers with
a tuple structure containing address/value pairs. The repeat mode is only
used by VP4 to load a firmware patch. It contains a starting address and
a sequence of bytes to be written into a gpio port.

10
drivers/media/video/Kconfig
View File

@@ -142,6 +142,16 @@ config VIDEO_CPIA_USB
otherwise say N. This will not work with the Creative Webcam III.
It is also available as a module (cpia_usb).
config VIDEO_CPIA2
tristate "CPiA2 Video For Linux"
depends on VIDEO_DEV
---help---
This is the video4linux driver for cameras based on Vision's CPiA2
(Colour Processor Interface ASIC), such as the Digital Blue QX5
Microscope. If you have one of these cameras, say Y here
This driver is also available as a module (cpia2).
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
depends on VIDEO_DEV && I2C

1
drivers/media/video/Makefile
View File

@@ -47,6 +47,7 @@ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o
obj-$(CONFIG_VIDEO_AUDIO_DECODER) += wm8775.o cs53l32a.o
obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
obj-$(CONFIG_VIDEO_MXB) += saa7111.o tuner.o tda9840.o tea6415c.o tea6420.o mxb.o
obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o

3
drivers/media/video/cpia2/Makefile Normal file
View File

@@ -0,0 +1,3 @@
cpia2-objs := cpia2_v4l.o cpia2_usb.o cpia2_core.o
obj-$(CONFIG_VIDEO_CPIA2) += cpia2.o

497
drivers/media/video/cpia2/cpia2.h Normal file
View File

@@ -0,0 +1,497 @@
/****************************************************************************
*
* Filename: cpia2.h
*
* Copyright 2001, STMicrolectronics, Inc.
*
* Contact: steve.miller@st.com
*
* Description:
* This is a USB driver for CPiA2 based video cameras.
*
* This driver is modelled on the cpia usb driver by
* Jochen Scharrlach and Johannes Erdfeldt.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
****************************************************************************/
#ifndef __CPIA2_H__
#define __CPIA2_H__
#include <linux/version.h>
#include <linux/videodev.h>
#include <linux/usb.h>
#include <linux/poll.h>
#include "cpia2dev.h"
#include "cpia2_registers.h"
/* define for verbose debug output */
//#define _CPIA2_DEBUG_
#define CPIA2_MAJ_VER 2
#define CPIA2_MIN_VER 0
#define CPIA2_PATCH_VER 0
/***
* Image defines
***/
#ifndef true
#define true 1
#define false 0
#endif
/* Misc constants */
#define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */
/* USB Transfer mode */
#define XFER_ISOC 0
#define XFER_BULK 1
/* USB Alternates */
#define USBIF_CMDONLY 0
#define USBIF_BULK 1
#define USBIF_ISO_1 2 /* 128 bytes/ms */
#define USBIF_ISO_2 3 /* 384 bytes/ms */
#define USBIF_ISO_3 4 /* 640 bytes/ms */
#define USBIF_ISO_4 5 /* 768 bytes/ms */
#define USBIF_ISO_5 6 /* 896 bytes/ms */
#define USBIF_ISO_6 7 /* 1023 bytes/ms */
/* Flicker Modes */
#define NEVER_FLICKER 0
#define ANTI_FLICKER_ON 1
#define FLICKER_60 60
#define FLICKER_50 50
/* Debug flags */
#define DEBUG_NONE 0
#define DEBUG_REG 0x00000001
#define DEBUG_DUMP_PATCH 0x00000002
#define DEBUG_DUMP_REGS 0x00000004
/***
* Video frame sizes
***/
enum {
VIDEOSIZE_VGA = 0, /* 640x480 */
VIDEOSIZE_CIF, /* 352x288 */
VIDEOSIZE_QVGA, /* 320x240 */
VIDEOSIZE_QCIF, /* 176x144 */
VIDEOSIZE_288_216,
VIDEOSIZE_256_192,
VIDEOSIZE_224_168,
VIDEOSIZE_192_144,
};
#define STV_IMAGE_CIF_ROWS 288
#define STV_IMAGE_CIF_COLS 352
#define STV_IMAGE_QCIF_ROWS 144
#define STV_IMAGE_QCIF_COLS 176
#define STV_IMAGE_VGA_ROWS 480
#define STV_IMAGE_VGA_COLS 640
#define STV_IMAGE_QVGA_ROWS 240
#define STV_IMAGE_QVGA_COLS 320
#define JPEG_MARKER_COM (1<<6) /* Comment segment */
/***
* Enums
***/
/* Sensor types available with cpia2 asics */
enum sensors {
CPIA2_SENSOR_410,
CPIA2_SENSOR_500
};
/* Asic types available in the CPiA2 architecture */
#define CPIA2_ASIC_672 0x67
/* Device types (stv672, stv676, etc) */
#define DEVICE_STV_672 0x0001
#define DEVICE_STV_676 0x0002
enum frame_status {
FRAME_EMPTY,
FRAME_READING, /* In the process of being grabbed into */
FRAME_READY, /* Ready to be read */
FRAME_ERROR,
};
/***
* Register access (for USB request byte)
***/
enum {
CAMERAACCESS_SYSTEM = 0,
CAMERAACCESS_VC,
CAMERAACCESS_VP,
CAMERAACCESS_IDATA
};
#define CAMERAACCESS_TYPE_BLOCK 0x00
#define CAMERAACCESS_TYPE_RANDOM 0x04
#define CAMERAACCESS_TYPE_MASK 0x08
#define CAMERAACCESS_TYPE_REPEAT 0x0C
#define TRANSFER_READ 0
#define TRANSFER_WRITE 1
#define DEFAULT_ALT USBIF_ISO_6
#define DEFAULT_BRIGHTNESS 0x46
#define DEFAULT_CONTRAST 0x93
#define DEFAULT_SATURATION 0x7f
#define DEFAULT_TARGET_KB 0x30
/* Power state */
#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER
#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER
/********
* Commands
*******/
enum {
CPIA2_CMD_NONE = 0,
CPIA2_CMD_GET_VERSION,
CPIA2_CMD_GET_PNP_ID,
CPIA2_CMD_GET_ASIC_TYPE,
CPIA2_CMD_GET_SENSOR,
CPIA2_CMD_GET_VP_DEVICE,
CPIA2_CMD_GET_VP_BRIGHTNESS,
CPIA2_CMD_SET_VP_BRIGHTNESS,
CPIA2_CMD_GET_CONTRAST,
CPIA2_CMD_SET_CONTRAST,
CPIA2_CMD_GET_VP_SATURATION,
CPIA2_CMD_SET_VP_SATURATION,
CPIA2_CMD_GET_VP_GPIO_DIRECTION,
CPIA2_CMD_SET_VP_GPIO_DIRECTION,
CPIA2_CMD_GET_VP_GPIO_DATA,
CPIA2_CMD_SET_VP_GPIO_DATA,
CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION,
CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
CPIA2_CMD_GET_VC_MP_GPIO_DATA,
CPIA2_CMD_SET_VC_MP_GPIO_DATA,
CPIA2_CMD_ENABLE_PACKET_CTRL,
CPIA2_CMD_GET_FLICKER_MODES,
CPIA2_CMD_SET_FLICKER_MODES,
CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */
CPIA2_CMD_SET_HI_POWER,
CPIA2_CMD_SET_LOW_POWER,
CPIA2_CMD_CLEAR_V2W_ERR,
CPIA2_CMD_SET_USER_MODE,
CPIA2_CMD_GET_USER_MODE,
CPIA2_CMD_FRAMERATE_REQ,
CPIA2_CMD_SET_COMPRESSION_STATE,
CPIA2_CMD_GET_WAKEUP,
CPIA2_CMD_SET_WAKEUP,
CPIA2_CMD_GET_PW_CONTROL,
CPIA2_CMD_SET_PW_CONTROL,
CPIA2_CMD_GET_SYSTEM_CTRL,
CPIA2_CMD_SET_SYSTEM_CTRL,
CPIA2_CMD_GET_VP_SYSTEM_STATE,
CPIA2_CMD_GET_VP_SYSTEM_CTRL,
CPIA2_CMD_SET_VP_SYSTEM_CTRL,
CPIA2_CMD_GET_VP_EXP_MODES,
CPIA2_CMD_SET_VP_EXP_MODES,
CPIA2_CMD_GET_DEVICE_CONFIG,
CPIA2_CMD_SET_DEVICE_CONFIG,
CPIA2_CMD_SET_SERIAL_ADDR,
CPIA2_CMD_SET_SENSOR_CR1,
CPIA2_CMD_GET_VC_CONTROL,
CPIA2_CMD_SET_VC_CONTROL,
CPIA2_CMD_SET_TARGET_KB,
CPIA2_CMD_SET_DEF_JPEG_OPT,
CPIA2_CMD_REHASH_VP4,
CPIA2_CMD_GET_USER_EFFECTS,
CPIA2_CMD_SET_USER_EFFECTS
};
enum user_cmd {
COMMAND_NONE = 0x00000001,
COMMAND_SET_FPS = 0x00000002,
COMMAND_SET_COLOR_PARAMS = 0x00000004,
COMMAND_GET_COLOR_PARAMS = 0x00000008,
COMMAND_SET_FORMAT = 0x00000010, /* size, etc */
COMMAND_SET_FLICKER = 0x00000020
};
/***
* Some defines specific to the 676 chip
***/
#define CAMACC_CIF 0x01
#define CAMACC_VGA 0x02
#define CAMACC_QCIF 0x04
#define CAMACC_QVGA 0x08
struct cpia2_register {
u8 index;
u8 value;
};
struct cpia2_reg_mask {
u8 index;
u8 and_mask;
u8 or_mask;
u8 fill;
};
struct cpia2_command {
u32 command;
u8 req_mode; /* (Block or random) | registerBank */
u8 reg_count;
u8 direction;
u8 start;
union reg_types {
struct cpia2_register registers[32];
struct cpia2_reg_mask masks[16];
u8 block_data[64];
u8 *patch_data; /* points to function defined block */
} buffer;
};
struct camera_params {
struct {
u8 firmware_revision_hi; /* For system register set (bank 0) */
u8 firmware_revision_lo;
u8 asic_id; /* Video Compressor set (bank 1) */
u8 asic_rev;
u8 vp_device_hi; /* Video Processor set (bank 2) */
u8 vp_device_lo;
u8 sensor_flags;
u8 sensor_rev;
} version;
struct {
u32 device_type; /* enumerated from vendor/product ids.
* Currently, either STV_672 or STV_676 */
u16 vendor;
u16 product;
u16 device_revision;
} pnp_id;
struct {
u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */
u8 contrast; /* Note: this is CPIA2_VP_YRANGE */
u8 saturation; /* CPIA2_VP_SATURATION */
} color_params;
struct {
u8 cam_register;
u8 flicker_mode_req; /* 1 if flicker on, else never flicker */
int mains_frequency;
} flicker_control;
struct {
u8 jpeg_options;
u8 creep_period;
u8 user_squeeze;
u8 inhibit_htables;
} compression;
struct {
u8 ohsize; /* output image size */
u8 ovsize;
u8 hcrop; /* cropping start_pos/4 */
u8 vcrop;
u8 hphase; /* scaling registers */
u8 vphase;
u8 hispan;
u8 vispan;
u8 hicrop;
u8 vicrop;
u8 hifraction;
u8 vifraction;
} image_size;
struct {
int width; /* actual window width */
int height; /* actual window height */
} roi;
struct {
u8 video_mode;
u8 frame_rate;
u8 video_size; /* Not a register, just a convenience for cropped sizes */
u8 gpio_direction;
u8 gpio_data;
u8 system_ctrl;
u8 system_state;
u8 lowlight_boost; /* Bool: 0 = off, 1 = on */
u8 device_config;
u8 exposure_modes;
u8 user_effects;
} vp_params;
struct {
u8 pw_control;
u8 wakeup;
u8 vc_control;
u8 vc_mp_direction;
u8 vc_mp_data;
u8 target_kb;
} vc_params;
struct {
u8 power_mode;
u8 system_ctrl;
u8 stream_mode; /* This is the current alternate for usb drivers */
u8 allow_corrupt;
} camera_state;
};
#define NUM_SBUF 2
struct cpia2_sbuf {
char *data;
struct urb *urb;
};
struct framebuf {
struct timeval timestamp;
unsigned long seq;
int num;
int length;
int max_length;
volatile enum frame_status status;
u8 *data;
struct framebuf *next;
};
struct cpia2_fh {
enum v4l2_priority prio;
u8 mmapped;
};
struct camera_data {
/* locks */
struct semaphore busy_lock; /* guard against SMP multithreading */
struct v4l2_prio_state prio;
/* camera status */
volatile int present; /* Is the camera still present? */
int open_count; /* # of process that have camera open */
int first_image_seen;
u8 mains_freq; /* for flicker control */
enum sensors sensor_type;
u8 flush;
u8 mmapped;
int streaming; /* 0 = no, 1 = yes */
int xfer_mode; /* XFER_BULK or XFER_ISOC */
struct camera_params params; /* camera settings */
/* v4l */
int video_size; /* VIDEO_SIZE_ */
struct video_device *vdev; /* v4l videodev */
struct video_picture vp; /* v4l camera settings */
struct video_window vw; /* v4l capture area */
__u32 pixelformat; /* Format fourcc */
/* USB */
struct usb_device *dev;
unsigned char iface;
unsigned int cur_alt;
unsigned int old_alt;
struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */
wait_queue_head_t wq_stream;
/* Buffering */
u32 frame_size;
int num_frames;
unsigned long frame_count;
u8 *frame_buffer; /* frame buffer data */
struct framebuf *buffers;
struct framebuf * volatile curbuff;
struct framebuf *workbuff;
/* MJPEG Extension */
int APPn; /* Number of APP segment to be written, must be 0..15 */
int APP_len; /* Length of data in JPEG APPn segment */
char APP_data[60]; /* Data in the JPEG APPn segment. */
int COM_len; /* Length of data in JPEG COM segment */
char COM_data[60]; /* Data in JPEG COM segment */
};
/* v4l */
int cpia2_register_camera(struct camera_data *cam);
void cpia2_unregister_camera(struct camera_data *cam);
/* core */
int cpia2_reset_camera(struct camera_data *cam);
int cpia2_set_low_power(struct camera_data *cam);
void cpia2_dbg_dump_registers(struct camera_data *cam);
int cpia2_match_video_size(int width, int height);
void cpia2_set_camera_state(struct camera_data *cam);
void cpia2_save_camera_state(struct camera_data *cam);
void cpia2_set_color_params(struct camera_data *cam);
void cpia2_set_brightness(struct camera_data *cam, unsigned char value);
void cpia2_set_contrast(struct camera_data *cam, unsigned char value);
void cpia2_set_saturation(struct camera_data *cam, unsigned char value);
int cpia2_set_flicker_mode(struct camera_data *cam, int mode);
void cpia2_set_format(struct camera_data *cam);
int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
int cpia2_do_command(struct camera_data *cam,
unsigned int command,
unsigned char direction, unsigned char param);
struct camera_data *cpia2_init_camera_struct(void);
int cpia2_init_camera(struct camera_data *cam);
int cpia2_allocate_buffers(struct camera_data *cam);
void cpia2_free_buffers(struct camera_data *cam);
long cpia2_read(struct camera_data *cam,
char *buf, unsigned long count, int noblock);
unsigned int cpia2_poll(struct camera_data *cam,
struct file *filp, poll_table *wait);
int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma);
void cpia2_set_property_flip(struct camera_data *cam, int prop_val);
void cpia2_set_property_mirror(struct camera_data *cam, int prop_val);
int cpia2_set_target_kb(struct camera_data *cam, unsigned char value);
int cpia2_set_gpio(struct camera_data *cam, unsigned char setting);
int cpia2_set_fps(struct camera_data *cam, int framerate);
/* usb */
int cpia2_usb_init(void);
void cpia2_usb_cleanup(void);
int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers,
u8 request, u8 start, u8 count, u8 direction);
int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate);
int cpia2_usb_stream_stop(struct camera_data *cam);
int cpia2_usb_stream_pause(struct camera_data *cam);
int cpia2_usb_stream_resume(struct camera_data *cam);
int cpia2_usb_change_streaming_alternate(struct camera_data *cam,
unsigned int alt);
/* ----------------------- debug functions ---------------------- */
#ifdef _CPIA2_DEBUG_
#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args)
#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args)
#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args)
#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args)
#else
#define ALOG(fmt,args...) printk(fmt,##args)
#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args)
#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args)
#define DBG(fmn,args...) do {} while(0)
#endif
/* No function or lineno, for shorter lines */
#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args)
#endif

2525
drivers/media/video/cpia2/cpia2_core.c Normal file
View File

File diff suppressed because it is too large Load Diff

476
drivers/media/video/cpia2/cpia2_registers.h Normal file
View File

@@ -0,0 +1,476 @@
/****************************************************************************
*
* Filename: cpia2registers.h
*
* Copyright 2001, STMicrolectronics, Inc.
*
* Description:
* Definitions for the CPia2 register set
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
****************************************************************************/
#ifndef CPIA2_REGISTER_HEADER
#define CPIA2_REGISTER_HEADER
/***
* System register set (Bank 0)
***/
#define CPIA2_SYSTEM_DEVICE_HI 0x00
#define CPIA2_SYSTEM_DEVICE_LO 0x01
#define CPIA2_SYSTEM_SYSTEM_CONTROL 0x02
#define CPIA2_SYSTEM_CONTROL_LOW_POWER 0x00
#define CPIA2_SYSTEM_CONTROL_HIGH_POWER 0x01
#define CPIA2_SYSTEM_CONTROL_SUSPEND 0x02
#define CPIA2_SYSTEM_CONTROL_V2W_ERR 0x10
#define CPIA2_SYSTEM_CONTROL_RB_ERR 0x10
#define CPIA2_SYSTEM_CONTROL_CLEAR_ERR 0x80
#define CPIA2_SYSTEM_INT_PACKET_CTRL 0x04
#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX 0x01
#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_EOF 0x02
#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_INT1 0x04
#define CPIA2_SYSTEM_CACHE_CTRL 0x05
#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_RESET 0x01
#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_FLUSH 0x02
#define CPIA2_SYSTEM_SERIAL_CTRL 0x06
#define CPIA2_SYSTEM_SERIAL_CTRL_NULL_CMD 0x00
#define CPIA2_SYSTEM_SERIAL_CTRL_START_CMD 0x01
#define CPIA2_SYSTEM_SERIAL_CTRL_STOP_CMD 0x02
#define CPIA2_SYSTEM_SERIAL_CTRL_WRITE_CMD 0x03
#define CPIA2_SYSTEM_SERIAL_CTRL_READ_ACK_CMD 0x04
#define CPIA2_SYSTEM_SERIAL_CTRL_READ_NACK_CMD 0x05
#define CPIA2_SYSTEM_SERIAL_DATA 0x07
#define CPIA2_SYSTEM_VP_SERIAL_ADDR 0x08
/***
* I2C addresses for various devices in CPiA2
***/
#define CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR 0x20
#define CPIA2_SYSTEM_VP_SERIAL_ADDR_VP 0x88
#define CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP 0x8A
#define CPIA2_SYSTEM_SPARE_REG1 0x09
#define CPIA2_SYSTEM_SPARE_REG2 0x0A
#define CPIA2_SYSTEM_SPARE_REG3 0x0B
#define CPIA2_SYSTEM_MC_PORT_0 0x0C
#define CPIA2_SYSTEM_MC_PORT_1 0x0D
#define CPIA2_SYSTEM_MC_PORT_2 0x0E
#define CPIA2_SYSTEM_MC_PORT_3 0x0F
#define CPIA2_SYSTEM_STATUS_PKT 0x20
#define CPIA2_SYSTEM_STATUS_PKT_END 0x27
#define CPIA2_SYSTEM_DESCRIP_VID_HI 0x30
#define CPIA2_SYSTEM_DESCRIP_VID_LO 0x31
#define CPIA2_SYSTEM_DESCRIP_PID_HI 0x32
#define CPIA2_SYSTEM_DESCRIP_PID_LO 0x33
#define CPIA2_SYSTEM_FW_VERSION_HI 0x34
#define CPIA2_SYSTEM_FW_VERSION_LO 0x35
#define CPIA2_SYSTEM_CACHE_START_INDEX 0x80
#define CPIA2_SYSTEM_CACHE_MAX_WRITES 0x10
/***
* VC register set (Bank 1)
***/
#define CPIA2_VC_ASIC_ID 0x80
#define CPIA2_VC_ASIC_REV 0x81
#define CPIA2_VC_PW_CTRL 0x82
#define CPIA2_VC_PW_CTRL_COLDSTART 0x01
#define CPIA2_VC_PW_CTRL_CP_CLK_EN 0x02
#define CPIA2_VC_PW_CTRL_VP_RESET_N 0x04
#define CPIA2_VC_PW_CTRL_VC_CLK_EN 0x08
#define CPIA2_VC_PW_CTRL_VC_RESET_N 0x10
#define CPIA2_VC_PW_CTRL_GOTO_SUSPEND 0x20
#define CPIA2_VC_PW_CTRL_UDC_SUSPEND 0x40
#define CPIA2_VC_PW_CTRL_PWR_DOWN 0x80
#define CPIA2_VC_WAKEUP 0x83
#define CPIA2_VC_WAKEUP_SW_ENABLE 0x01
#define CPIA2_VC_WAKEUP_XX_ENABLE 0x02
#define CPIA2_VC_WAKEUP_SW_ATWAKEUP 0x04
#define CPIA2_VC_WAKEUP_XX_ATWAKEUP 0x08
#define CPIA2_VC_CLOCK_CTRL 0x84
#define CPIA2_VC_CLOCK_CTRL_TESTUP72 0x01
#define CPIA2_VC_INT_ENABLE 0x88
#define CPIA2_VC_INT_ENABLE_XX_IE 0x01
#define CPIA2_VC_INT_ENABLE_SW_IE 0x02
#define CPIA2_VC_INT_ENABLE_VC_IE 0x04
#define CPIA2_VC_INT_ENABLE_USBDATA_IE 0x08
#define CPIA2_VC_INT_ENABLE_USBSETUP_IE 0x10
#define CPIA2_VC_INT_ENABLE_USBCFG_IE 0x20
#define CPIA2_VC_INT_FLAG 0x89
#define CPIA2_VC_INT_ENABLE_XX_FLAG 0x01
#define CPIA2_VC_INT_ENABLE_SW_FLAG 0x02
#define CPIA2_VC_INT_ENABLE_VC_FLAG 0x04
#define CPIA2_VC_INT_ENABLE_USBDATA_FLAG 0x08
#define CPIA2_VC_INT_ENABLE_USBSETUP_FLAG 0x10
#define CPIA2_VC_INT_ENABLE_USBCFG_FLAG 0x20
#define CPIA2_VC_INT_ENABLE_SET_RESET_BIT 0x80
#define CPIA2_VC_INT_STATE 0x8A
#define CPIA2_VC_INT_STATE_XX_STATE 0x01
#define CPIA2_VC_INT_STATE_SW_STATE 0x02
#define CPIA2_VC_MP_DIR 0x90
#define CPIA2_VC_MP_DIR_INPUT 0x00
#define CPIA2_VC_MP_DIR_OUTPUT 0x01
#define CPIA2_VC_MP_DATA 0x91
#define CPIA2_VC_DP_CTRL 0x98
#define CPIA2_VC_DP_CTRL_MODE_0 0x00
#define CPIA2_VC_DP_CTRL_MODE_A 0x01
#define CPIA2_VC_DP_CTRL_MODE_B 0x02
#define CPIA2_VC_DP_CTRL_MODE_C 0x03
#define CPIA2_VC_DP_CTRL_FAKE_FST 0x04
#define CPIA2_VC_AD_CTRL 0x99
#define CPIA2_VC_AD_CTRL_SRC_0 0x00
#define CPIA2_VC_AD_CTRL_SRC_DIGI_A 0x01
#define CPIA2_VC_AD_CTRL_SRC_REG 0x02
#define CPIA2_VC_AD_CTRL_DST_USB 0x00
#define CPIA2_VC_AD_CTRL_DST_REG 0x04
#define CPIA2_VC_AD_TEST_IN 0x9B
#define CPIA2_VC_AD_TEST_OUT 0x9C
#define CPIA2_VC_AD_STATUS 0x9D
#define CPIA2_VC_AD_STATUS_EMPTY 0x01
#define CPIA2_VC_AD_STATUS_FULL 0x02
#define CPIA2_VC_DP_DATA 0x9E
#define CPIA2_VC_ST_CTRL 0xA0
#define CPIA2_VC_ST_CTRL_SRC_VC 0x00
#define CPIA2_VC_ST_CTRL_SRC_DP 0x01
#define CPIA2_VC_ST_CTRL_SRC_REG 0x02
#define CPIA2_VC_ST_CTRL_RAW_SELECT 0x04
#define CPIA2_VC_ST_CTRL_DST_USB 0x00
#define CPIA2_VC_ST_CTRL_DST_DP 0x08
#define CPIA2_VC_ST_CTRL_DST_REG 0x10
#define CPIA2_VC_ST_CTRL_FIFO_ENABLE 0x20
#define CPIA2_VC_ST_CTRL_EOF_DETECT 0x40
#define CPIA2_VC_ST_TEST 0xA1
#define CPIA2_VC_ST_TEST_MODE_MANUAL 0x00
#define CPIA2_VC_ST_TEST_MODE_INCREMENT 0x02
#define CPIA2_VC_ST_TEST_AUTO_FILL 0x08
#define CPIA2_VC_ST_TEST_REPEAT_FIFO 0x10
#define CPIA2_VC_ST_TEST_IN 0xA2
#define CPIA2_VC_ST_TEST_OUT 0xA3
#define CPIA2_VC_ST_STATUS 0xA4
#define CPIA2_VC_ST_STATUS_EMPTY 0x01
#define CPIA2_VC_ST_STATUS_FULL 0x02
#define CPIA2_VC_ST_FRAME_DETECT_1 0xA5
#define CPIA2_VC_ST_FRAME_DETECT_2 0xA6
#define CPIA2_VC_USB_CTRL 0xA8
#define CPIA2_VC_USB_CTRL_CMD_STALLED 0x01
#define CPIA2_VC_USB_CTRL_CMD_READY 0x02
#define CPIA2_VC_USB_CTRL_CMD_STATUS 0x04
#define CPIA2_VC_USB_CTRL_CMD_STATUS_DIR 0x08
#define CPIA2_VC_USB_CTRL_CMD_NO_CLASH 0x10
#define CPIA2_VC_USB_CTRL_CMD_MICRO_ACCESS 0x80
#define CPIA2_VC_USB_STRM 0xA9
#define CPIA2_VC_USB_STRM_ISO_ENABLE 0x01
#define CPIA2_VC_USB_STRM_BLK_ENABLE 0x02
#define CPIA2_VC_USB_STRM_INT_ENABLE 0x04
#define CPIA2_VC_USB_STRM_AUD_ENABLE 0x08
#define CPIA2_VC_USB_STATUS 0xAA
#define CPIA2_VC_USB_STATUS_CMD_IN_PROGRESS 0x01
#define CPIA2_VC_USB_STATUS_CMD_STATUS_STALL 0x02
#define CPIA2_VC_USB_STATUS_CMD_HANDSHAKE 0x04
#define CPIA2_VC_USB_STATUS_CMD_OVERRIDE 0x08
#define CPIA2_VC_USB_STATUS_CMD_FIFO_BUSY 0x10
#define CPIA2_VC_USB_STATUS_BULK_REPEAT_TXN 0x20
#define CPIA2_VC_USB_STATUS_CONFIG_DONE 0x40
#define CPIA2_VC_USB_STATUS_USB_SUSPEND 0x80
#define CPIA2_VC_USB_CMDW 0xAB
#define CPIA2_VC_USB_DATARW 0xAC
#define CPIA2_VC_USB_INFO 0xAD
#define CPIA2_VC_USB_CONFIG 0xAE
#define CPIA2_VC_USB_SETTINGS 0xAF
#define CPIA2_VC_USB_SETTINGS_CONFIG_MASK 0x03
#define CPIA2_VC_USB_SETTINGS_INTERFACE_MASK 0x0C
#define CPIA2_VC_USB_SETTINGS_ALTERNATE_MASK 0x70
#define CPIA2_VC_USB_ISOLIM 0xB0
#define CPIA2_VC_USB_ISOFAILS 0xB1
#define CPIA2_VC_USB_ISOMAXPKTHI 0xB2
#define CPIA2_VC_USB_ISOMAXPKTLO 0xB3
#define CPIA2_VC_V2W_CTRL 0xB8
#define CPIA2_VC_V2W_SELECT 0x01
#define CPIA2_VC_V2W_SCL 0xB9
#define CPIA2_VC_V2W_SDA 0xBA
#define CPIA2_VC_VC_CTRL 0xC0
#define CPIA2_VC_VC_CTRL_RUN 0x01
#define CPIA2_VC_VC_CTRL_SINGLESHOT 0x02
#define CPIA2_VC_VC_CTRL_IDLING 0x04
#define CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES 0x10
#define CPIA2_VC_VC_CTRL_INHIBIT_Q_TABLES 0x20
#define CPIA2_VC_VC_CTRL_INHIBIT_PRIVATE 0x40
#define CPIA2_VC_VC_RESTART_IVAL_HI 0xC1
#define CPIA2_VC_VC_RESTART_IVAL_LO 0xC2
#define CPIA2_VC_VC_FORMAT 0xC3
#define CPIA2_VC_VC_FORMAT_UFIRST 0x01
#define CPIA2_VC_VC_FORMAT_MONO 0x02
#define CPIA2_VC_VC_FORMAT_DECIMATING 0x04
#define CPIA2_VC_VC_FORMAT_SHORTLINE 0x08
#define CPIA2_VC_VC_FORMAT_SELFTEST 0x10
#define CPIA2_VC_VC_CLOCKS 0xC4
#define CPIA2_VC_VC_CLOCKS_CLKDIV_MASK 0x03
#define CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 0x04
#define CPIA2_VC_VC_672_CLOCKS_SCALING 0x08
#define CPIA2_VC_VC_CLOCKS_LOGDIV0 0x00
#define CPIA2_VC_VC_CLOCKS_LOGDIV1 0x01
#define CPIA2_VC_VC_CLOCKS_LOGDIV2 0x02
#define CPIA2_VC_VC_CLOCKS_LOGDIV3 0x03
#define CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 0x08
#define CPIA2_VC_VC_676_CLOCKS_SCALING 0x10
#define CPIA2_VC_VC_IHSIZE_LO 0xC5
#define CPIA2_VC_VC_XLIM_HI 0xC6
#define CPIA2_VC_VC_XLIM_LO 0xC7
#define CPIA2_VC_VC_YLIM_HI 0xC8
#define CPIA2_VC_VC_YLIM_LO 0xC9
#define CPIA2_VC_VC_OHSIZE 0xCA
#define CPIA2_VC_VC_OVSIZE 0xCB
#define CPIA2_VC_VC_HCROP 0xCC
#define CPIA2_VC_VC_VCROP 0xCD
#define CPIA2_VC_VC_HPHASE 0xCE
#define CPIA2_VC_VC_VPHASE 0xCF
#define CPIA2_VC_VC_HISPAN 0xD0
#define CPIA2_VC_VC_VISPAN 0xD1
#define CPIA2_VC_VC_HICROP 0xD2
#define CPIA2_VC_VC_VICROP 0xD3
#define CPIA2_VC_VC_HFRACT 0xD4
#define CPIA2_VC_VC_HFRACT_DEN_MASK 0x0F
#define CPIA2_VC_VC_HFRACT_NUM_MASK 0xF0
#define CPIA2_VC_VC_VFRACT 0xD5
#define CPIA2_VC_VC_VFRACT_DEN_MASK 0x0F
#define CPIA2_VC_VC_VFRACT_NUM_MASK 0xF0
#define CPIA2_VC_VC_JPEG_OPT 0xD6
#define CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE 0x01
#define CPIA2_VC_VC_JPEG_OPT_NO_DC_AUTO_SQUEEZE 0x02
#define CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE 0x04
#define CPIA2_VC_VC_JPEG_OPT_DEFAULT (CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE|\
CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE)
#define CPIA2_VC_VC_CREEP_PERIOD 0xD7
#define CPIA2_VC_VC_USER_SQUEEZE 0xD8
#define CPIA2_VC_VC_TARGET_KB 0xD9
#define CPIA2_VC_VC_AUTO_SQUEEZE 0xE6
/***
* VP register set (Bank 2)
***/
#define CPIA2_VP_DEVICEH 0
#define CPIA2_VP_DEVICEL 1
#define CPIA2_VP_SYSTEMSTATE 0x02
#define CPIA2_VP_SYSTEMSTATE_HK_ALIVE 0x01
#define CPIA2_VP_SYSTEMCTRL 0x03
#define CPIA2_VP_SYSTEMCTRL_REQ_CLEAR_ERROR 0x80
#define CPIA2_VP_SYSTEMCTRL_POWER_DOWN_PLL 0x20
#define CPIA2_VP_SYSTEMCTRL_REQ_SUSPEND_STATE 0x10
#define CPIA2_VP_SYSTEMCTRL_REQ_SERIAL_WAKEUP 0x08
#define CPIA2_VP_SYSTEMCTRL_REQ_AUTOLOAD 0x04
#define CPIA2_VP_SYSTEMCTRL_HK_CONTROL 0x02
#define CPIA2_VP_SYSTEMCTRL_POWER_CONTROL 0x01
#define CPIA2_VP_SENSOR_FLAGS 0x05
#define CPIA2_VP_SENSOR_FLAGS_404 0x01
#define CPIA2_VP_SENSOR_FLAGS_407 0x02
#define CPIA2_VP_SENSOR_FLAGS_409 0x04
#define CPIA2_VP_SENSOR_FLAGS_410 0x08
#define CPIA2_VP_SENSOR_FLAGS_500 0x10
#define CPIA2_VP_SENSOR_REV 0x06
#define CPIA2_VP_DEVICE_CONFIG 0x07
#define CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE 0x01
#define CPIA2_VP_GPIO_DIRECTION 0x08
#define CPIA2_VP_GPIO_READ 0xFF
#define CPIA2_VP_GPIO_WRITE 0x00
#define CPIA2_VP_GPIO_DATA 0x09
#define CPIA2_VP_RAM_ADDR_H 0x0A
#define CPIA2_VP_RAM_ADDR_L 0x0B
#define CPIA2_VP_RAM_DATA 0x0C
#define CPIA2_VP_PATCH_REV 0x0F
#define CPIA2_VP4_USER_MODE 0x10
#define CPIA2_VP5_USER_MODE 0x13
#define CPIA2_VP_USER_MODE_CIF 0x01
#define CPIA2_VP_USER_MODE_QCIFDS 0x02
#define CPIA2_VP_USER_MODE_QCIFPTC 0x04
#define CPIA2_VP_USER_MODE_QVGADS 0x08
#define CPIA2_VP_USER_MODE_QVGAPTC 0x10
#define CPIA2_VP_USER_MODE_VGA 0x20
#define CPIA2_VP4_FRAMERATE_REQUEST 0x11
#define CPIA2_VP5_FRAMERATE_REQUEST 0x14
#define CPIA2_VP_FRAMERATE_60 0x80
#define CPIA2_VP_FRAMERATE_50 0x40
#define CPIA2_VP_FRAMERATE_30 0x20
#define CPIA2_VP_FRAMERATE_25 0x10
#define CPIA2_VP_FRAMERATE_15 0x08
#define CPIA2_VP_FRAMERATE_12_5 0x04
#define CPIA2_VP_FRAMERATE_7_5 0x02
#define CPIA2_VP_FRAMERATE_6_25 0x01
#define CPIA2_VP4_USER_EFFECTS 0x12
#define CPIA2_VP5_USER_EFFECTS 0x15
#define CPIA2_VP_USER_EFFECTS_COLBARS 0x01
#define CPIA2_VP_USER_EFFECTS_COLBARS_GRAD 0x02
#define CPIA2_VP_USER_EFFECTS_MIRROR 0x04
#define CPIA2_VP_USER_EFFECTS_FLIP 0x40 // VP5 only
/* NOTE: CPIA2_VP_EXPOSURE_MODES shares the same register as VP5 User
* Effects */
#define CPIA2_VP_EXPOSURE_MODES 0x15
#define CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER 0x20
#define CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP 0x10
#define CPIA2_VP4_EXPOSURE_TARGET 0x16 // VP4
#define CPIA2_VP5_EXPOSURE_TARGET 0x20 // VP5
#define CPIA2_VP_FLICKER_MODES 0x1B
#define CPIA2_VP_FLICKER_MODES_50HZ 0x80
#define CPIA2_VP_FLICKER_MODES_CUSTOM_FLT_FFREQ 0x40
#define CPIA2_VP_FLICKER_MODES_NEVER_FLICKER 0x20
#define CPIA2_VP_FLICKER_MODES_INHIBIT_RUB 0x10
#define CPIA2_VP_FLICKER_MODES_ADJUST_LINE_FREQ 0x08
#define CPIA2_VP_FLICKER_MODES_CUSTOM_INT_FFREQ 0x04
#define CPIA2_VP_UMISC 0x1D
#define CPIA2_VP_UMISC_FORCE_MONO 0x80
#define CPIA2_VP_UMISC_FORCE_ID_MASK 0x40
#define CPIA2_VP_UMISC_INHIBIT_AUTO_FGS 0x20
#define CPIA2_VP_UMISC_INHIBIT_AUTO_DIMS 0x08
#define CPIA2_VP_UMISC_OPT_FOR_SENSOR_DS 0x04
#define CPIA2_VP_UMISC_INHIBIT_AUTO_MODE_INT 0x02
#define CPIA2_VP5_ANTIFLKRSETUP 0x22 //34
#define CPIA2_VP_INTERPOLATION 0x24
#define CPIA2_VP_INTERPOLATION_EVEN_FIRST 0x40
#define CPIA2_VP_INTERPOLATION_HJOG 0x20
#define CPIA2_VP_INTERPOLATION_VJOG 0x10
#define CPIA2_VP_GAMMA 0x25
#define CPIA2_VP_DEFAULT_GAMMA 0x10
#define CPIA2_VP_YRANGE 0x26
#define CPIA2_VP_SATURATION 0x27
#define CPIA2_VP5_MYBLACK_LEVEL 0x3A //58
#define CPIA2_VP5_MCYRANGE 0x3B //59
#define CPIA2_VP5_MYCEILING 0x3C //60
#define CPIA2_VP5_MCUVSATURATION 0x3D //61
#define CPIA2_VP_REHASH_VALUES 0x60
/***
* Common sensor registers
***/
#define CPIA2_SENSOR_DEVICE_H 0x00
#define CPIA2_SENSOR_DEVICE_L 0x01
#define CPIA2_SENSOR_DATA_FORMAT 0x16
#define CPIA2_SENSOR_DATA_FORMAT_HMIRROR 0x08
#define CPIA2_SENSOR_DATA_FORMAT_VMIRROR 0x10
#define CPIA2_SENSOR_CR1 0x76
#define CPIA2_SENSOR_CR1_STAND_BY 0x01
#define CPIA2_SENSOR_CR1_DOWN_RAMP_GEN 0x02
#define CPIA2_SENSOR_CR1_DOWN_COLUMN_ADC 0x04
#define CPIA2_SENSOR_CR1_DOWN_CAB_REGULATOR 0x08
#define CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR 0x10
#define CPIA2_SENSOR_CR1_DOWN_VRT_AMP 0x20
#define CPIA2_SENSOR_CR1_DOWN_BAND_GAP 0x40
#endif

907
drivers/media/video/cpia2/cpia2_usb.c Normal file
View File

File diff suppressed because it is too large Load Diff

2104
drivers/media/video/cpia2/cpia2_v4l.c Normal file
View File

File diff suppressed because it is too large Load Diff

50
drivers/media/video/cpia2/cpia2dev.h Normal file
View File

@@ -0,0 +1,50 @@
/****************************************************************************
*
* Filename: cpia2dev.h
*
* Copyright 2001, STMicrolectronics, Inc.
*
* Contact: steve.miller@st.com
*
* Description:
* This file provides definitions for applications wanting to use the
* cpia2 driver beyond the generic v4l capabilities.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
****************************************************************************/
#ifndef CPIA2_DEV_HEADER
#define CPIA2_DEV_HEADER
#include <linux/videodev.h>
/***
* The following defines are ioctl numbers based on video4linux private ioctls,
* which can range from 192 (BASE_VIDIOCPRIVATE) to 255. All of these take int
* args
*/
#define CPIA2_IOC_SET_GPIO _IOW('v', BASE_VIDIOCPRIVATE + 17, __u32)
/* V4L2 driver specific controls */
#define CPIA2_CID_TARGET_KB (V4L2_CID_PRIVATE_BASE+0)
#define CPIA2_CID_GPIO (V4L2_CID_PRIVATE_BASE+1)
#define CPIA2_CID_FLICKER_MODE (V4L2_CID_PRIVATE_BASE+2)
#define CPIA2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE+3)
#define CPIA2_CID_USB_ALT (V4L2_CID_PRIVATE_BASE+4)
#define CPIA2_CID_LIGHTS (V4L2_CID_PRIVATE_BASE+5)
#define CPIA2_CID_RESET_CAMERA (V4L2_CID_PRIVATE_BASE+6)
#endif

233
drivers/media/video/cpia2/cpia2patch.h Normal file
View File

@@ -0,0 +1,233 @@
/****************************************************************************
*
* Filename: cpia2patch.h
*
* Copyright 2001, STMicrolectronics, Inc.
*
* Contact: steve.miller@st.com
*
* Description:
* This file contains patch data for the CPiA2 (stv0672) VP4.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
****************************************************************************/
#ifndef CPIA2_PATCH_HEADER
#define CPIA2_PATCH_HEADER
typedef struct {
unsigned char reg;
unsigned char count;
const unsigned char *data;
} cpia2_patch;
static const unsigned char start_address_hi[1] = {
0x01
};
static const unsigned char start_address_lo[1] = {
0xBC
};
static const unsigned char patch_block0[64] = {
0xE3, 0x02, 0xE3, 0x03, 0xE3, 0x04, 0xE3, 0x05,
0xE3, 0x06, 0xE3, 0x07, 0x93, 0x44, 0x56, 0xD4,
0x93, 0x4E, 0x56, 0x51, 0x93, 0x4E, 0x51, 0xD6,
0x93, 0x4E, 0x4F, 0x54, 0x93, 0x4E, 0x92, 0x4F,
0x92, 0xA4, 0x93, 0x05, 0x92, 0xF4, 0x93, 0x1B,
0x92, 0x92, 0x91, 0xE6, 0x92, 0x36, 0x92, 0x74,
0x92, 0x4A, 0x92, 0x8C, 0x92, 0x8E, 0xC8, 0xD0,
0x0B, 0x42, 0x02, 0xA0, 0xCA, 0x92, 0x09, 0x02
};
static const unsigned char patch_block1[64] = {
0xC9, 0x10, 0x0A, 0x0A, 0x0A, 0x81, 0xE3, 0xB8,
0xE3, 0xB0, 0xE3, 0xA8, 0xE3, 0xA0, 0xE3, 0x98,
0xE3, 0x90, 0xE1, 0x00, 0xCF, 0xD7, 0x0A, 0x12,
0xCC, 0x95, 0x08, 0xB2, 0x0A, 0x18, 0xE1, 0x00,
0x01, 0xEE, 0x0C, 0x08, 0x4A, 0x12, 0xC8, 0x18,
0xF0, 0x9A, 0xC0, 0x22, 0xF3, 0x1C, 0x4A, 0x13,
0xF3, 0x14, 0xC8, 0xA0, 0xF2, 0x14, 0xF2, 0x1C,
0xEB, 0x13, 0xD3, 0xA2, 0x63, 0x16, 0x48, 0x9E
};
static const unsigned char patch_block2[64] = {
0xF0, 0x18, 0xA4, 0x03, 0xF3, 0x93, 0xC0, 0x58,
0xF7, 0x13, 0x51, 0x9C, 0xE9, 0x20, 0xCF, 0xEF,
0x63, 0xF9, 0x92, 0x2E, 0xD3, 0x5F, 0x63, 0xFA,
0x92, 0x2E, 0xD3, 0x67, 0x63, 0xFB, 0x92, 0x2E,
0xD3, 0x6F, 0xE9, 0x1A, 0x63, 0x16, 0x48, 0xA7,
0xF0, 0x20, 0xA4, 0x06, 0xF3, 0x94, 0xC0, 0x27,
0xF7, 0x14, 0xF5, 0x13, 0x51, 0x9D, 0xF6, 0x13,
0x63, 0x18, 0xC4, 0x20, 0xCB, 0xEF, 0x63, 0xFC
};
static const unsigned char patch_block3[64] = {
0x92, 0x2E, 0xD3, 0x77, 0x63, 0xFD, 0x92, 0x2E,
0xD3, 0x7F, 0x63, 0xFE, 0x92, 0x2E, 0xD3, 0x87,
0x63, 0xFF, 0x92, 0x2E, 0xD3, 0x8F, 0x64, 0x38,
0x92, 0x2E, 0xD3, 0x97, 0x64, 0x39, 0x92, 0x2E,
0xD3, 0x9F, 0xE1, 0x00, 0xF5, 0x3A, 0xF4, 0x3B,
0xF7, 0xBF, 0xF2, 0xBC, 0xF2, 0x3D, 0xE1, 0x00,
0x80, 0x87, 0x90, 0x80, 0x51, 0xD5, 0x02, 0x22,
0x02, 0x32, 0x4B, 0xD3, 0xF7, 0x11, 0x0B, 0xDA
};
static const unsigned char patch_block4[64] = {
0xE1, 0x00, 0x0E, 0x02, 0x02, 0x40, 0x0D, 0xB5,
0xE3, 0x02, 0x48, 0x55, 0xE5, 0x12, 0xA4, 0x01,
0xE8, 0x1B, 0xE3, 0x90, 0xF0, 0x18, 0xA4, 0x01,
0xE8, 0xBF, 0x8D, 0xB8, 0x4B, 0xD1, 0x4B, 0xD8,
0x0B, 0xCB, 0x0B, 0xC2, 0xE1, 0x00, 0xE3, 0x02,
0xE3, 0x03, 0x52, 0xD3, 0x60, 0x59, 0xE6, 0x93,
0x0D, 0x22, 0x52, 0xD4, 0xE6, 0x93, 0x0D, 0x2A,
0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x5D
};
static const unsigned char patch_block5[64] = {
0x02, 0x63, 0xE3, 0x02, 0xC8, 0x12, 0x02, 0xCA,
0xC8, 0x52, 0x02, 0xC2, 0x82, 0x68, 0xE3, 0x02,
0xC8, 0x14, 0x02, 0xCA, 0xC8, 0x90, 0x02, 0xC2,
0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA, 0xCC, 0xD2,
0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA, 0x0A, 0x98,
0x0A, 0xA0, 0x0A, 0xA8, 0xE3, 0x90, 0xE1, 0x00,
0xE3, 0x02, 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA,
0xCC, 0xD2, 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA
};
static const unsigned char patch_block6[64] = {
0x0A, 0x98, 0x0A, 0xA0, 0x0A, 0xA8, 0x49, 0x91,
0xE5, 0x6A, 0xA4, 0x04, 0xC8, 0x12, 0x02, 0xCA,
0xC8, 0x52, 0x82, 0x89, 0xC8, 0x14, 0x02, 0xCA,
0xC8, 0x90, 0x02, 0xC2, 0xE3, 0x90, 0xE1, 0x00,
0x08, 0x60, 0xE1, 0x00, 0x48, 0x53, 0xE8, 0x97,
0x08, 0x5A, 0xE1, 0x00, 0xE3, 0x02, 0xE3, 0x03,
0x54, 0xD3, 0x60, 0x59, 0xE6, 0x93, 0x0D, 0x52,
0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x9C
};
static const unsigned char patch_block7[64] = {
0xE3, 0x02, 0x55, 0x13, 0x93, 0x17, 0x55, 0x13,
0x93, 0x17, 0xE3, 0x90, 0xE1, 0x00, 0x75, 0x30,
0xE3, 0x02, 0xE3, 0x03, 0x55, 0x55, 0x60, 0x59,
0xE6, 0x93, 0x0D, 0xB2, 0xE3, 0x98, 0xE3, 0x90,
0xE1, 0x00, 0x02, 0xAE, 0xE7, 0x92, 0xE9, 0x18,
0xEA, 0x9A, 0xE8, 0x98, 0xE8, 0x10, 0xE8, 0x11,
0xE8, 0x51, 0xD2, 0xDA, 0xD2, 0xF3, 0xE8, 0x13,
0xD2, 0xFA, 0xE8, 0x50, 0xD2, 0xEA, 0xE8, 0xD0
};
static const unsigned char patch_block8[64] = {
0xE8, 0xD1, 0xD3, 0x0A, 0x03, 0x09, 0x48, 0x23,
0xE5, 0x2C, 0xA0, 0x03, 0x48, 0x24, 0xEA, 0x1C,
0x03, 0x08, 0xD2, 0xE3, 0xD3, 0x03, 0xD3, 0x13,
0xE1, 0x00, 0x02, 0xCB, 0x05, 0x93, 0x57, 0x93,
0xF0, 0x9A, 0xAC, 0x0B, 0xE3, 0x07, 0x92, 0xEA,
0xE2, 0x9F, 0xE5, 0x06, 0xE3, 0xB0, 0xA0, 0x02,
0xEB, 0x1E, 0x82, 0xD7, 0xEA, 0x1E, 0xE2, 0x3B,
0x85, 0x9B, 0xE9, 0x1E, 0xC8, 0x90, 0x85, 0x94
};
static const unsigned char patch_block9[64] = {
0x02, 0xDE, 0x05, 0x80, 0x57, 0x93, 0xF0, 0xBA,
0xAC, 0x06, 0x92, 0xEA, 0xE2, 0xBF, 0xE5, 0x06,
0xA0, 0x01, 0xEB, 0xBF, 0x85, 0x88, 0xE9, 0x3E,
0xC8, 0x90, 0x85, 0x81, 0xE9, 0x3E, 0xF0, 0xBA,
0xF3, 0x39, 0xF0, 0x3A, 0x60, 0x17, 0xF0, 0x3A,
0xC0, 0x90, 0xF0, 0xBA, 0xE1, 0x00, 0x00, 0x3F,
0xE3, 0x02, 0xE3, 0x03, 0x58, 0x10, 0x60, 0x59,
0xE6, 0x93, 0x0D, 0xA2, 0x58, 0x12, 0xE6, 0x93
};
static const unsigned char patch_block10[64] = {
0x0D, 0xAA, 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00,
0x03, 0x01, 0xE1, 0x00, 0x03, 0x03, 0x9B, 0x7D,
0x8B, 0x8B, 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x56,
0x60, 0x59, 0xE6, 0x93, 0x0D, 0xBA, 0xE3, 0x98,
0xE3, 0x90, 0xE1, 0x00, 0x03, 0x0F, 0x93, 0x11,
0xE1, 0x00, 0xE3, 0x02, 0x4A, 0x11, 0x0B, 0x42,
0x91, 0xAF, 0xE3, 0x90, 0xE1, 0x00, 0xF2, 0x91,
0xF0, 0x91, 0xA3, 0xFE, 0xE1, 0x00, 0x60, 0x92
};
static const unsigned char patch_block11[64] = {
0xC0, 0x5F, 0xF0, 0x13, 0xF0, 0x13, 0x59, 0x5B,
0xE2, 0x13, 0xF0, 0x11, 0x5A, 0x19, 0xE2, 0x13,
0xE1, 0x00, 0x00, 0x00, 0x03, 0x27, 0x68, 0x61,
0x76, 0x61, 0x6E, 0x61, 0x00, 0x06, 0x03, 0x2C,
0xE3, 0x02, 0xE3, 0x03, 0xE9, 0x38, 0x59, 0x15,
0x59, 0x5A, 0xF2, 0x9A, 0xBC, 0x0B, 0xA4, 0x0A,
0x59, 0x1E, 0xF3, 0x11, 0xF0, 0x1A, 0xE2, 0xBB,
0x59, 0x15, 0xF0, 0x11, 0x19, 0x2A, 0xE5, 0x02
};
static const unsigned char patch_block12[54] = {
0xA4, 0x01, 0xEB, 0xBF, 0xE3, 0x98, 0xE3, 0x90,
0xE1, 0x00, 0x03, 0x42, 0x19, 0x28, 0xE1, 0x00,
0xE9, 0x30, 0x60, 0x79, 0xE1, 0x00, 0xE3, 0x03,
0xE3, 0x07, 0x60, 0x79, 0x93, 0x4E, 0xE3, 0xB8,
0xE3, 0x98, 0xE1, 0x00, 0xE9, 0x1A, 0xF0, 0x1F,
0xE2, 0x33, 0xF0, 0x91, 0xE2, 0x92, 0xE0, 0x32,
0xF0, 0x31, 0xE1, 0x00, 0x00, 0x00
};
static const unsigned char do_call[1] = {
0x01
};
#define PATCH_DATA_SIZE 18
static const cpia2_patch patch_data[PATCH_DATA_SIZE] = {
{0x0A, sizeof(start_address_hi), start_address_hi}
, // 0
{0x0B, sizeof(start_address_lo), start_address_lo}
, // 1
{0x0C, sizeof(patch_block0), patch_block0}
, // 2
{0x0C, sizeof(patch_block1), patch_block1}
, // 3
{0x0C, sizeof(patch_block2), patch_block2}
, // 4
{0x0C, sizeof(patch_block3), patch_block3}
, // 5
{0x0C, sizeof(patch_block4), patch_block4}
, // 6
{0x0C, sizeof(patch_block5), patch_block5}
, // 7
{0x0C, sizeof(patch_block6), patch_block6}
, // 8
{0x0C, sizeof(patch_block7), patch_block7}
, // 9
{0x0C, sizeof(patch_block8), patch_block8}
, // 10
{0x0C, sizeof(patch_block9), patch_block9}
, //11
{0x0C, sizeof(patch_block10), patch_block10}
, // 12
{0x0C, sizeof(patch_block11), patch_block11}
, // 13
{0x0C, sizeof(patch_block12), patch_block12}
, // 14
{0x0A, sizeof(start_address_hi), start_address_hi}
, // 15
{0x0B, sizeof(start_address_lo), start_address_lo}
, // 16
{0x0D, sizeof(do_call), do_call} //17
};
#endif