Merge 5.10.144 into android12-5.10-lts

Changes in 5.10.144
	ARM: dts: imx: align SPI NOR node name with dtschema
	ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible
	iommu/vt-d: Correctly calculate sagaw value of IOMMU
	tracefs: Only clobber mode/uid/gid on remount if asked
	Input: goodix - add support for GT1158
	drm/msm/rd: Fix FIFO-full deadlock
	HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo
	hid: intel-ish-hid: ishtp: Fix ishtp client sending disordered message
	tg3: Disable tg3 device on system reboot to avoid triggering AER
	gpio: mockup: remove gpio debugfs when remove device
	ieee802154: cc2520: add rc code in cc2520_tx()
	Input: iforce - add support for Boeder Force Feedback Wheel
	nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
	drm/amd/amdgpu: skip ucode loading if ucode_size == 0
	perf/arm_pmu_platform: fix tests for platform_get_irq() failure
	platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes
	usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
	mm: Fix TLB flush for not-first PFNMAP mappings in unmap_region()
	Revert "x86/ftrace: Use alternative RET encoding"
	x86/ibt,ftrace: Make function-graph play nice
	x86/ftrace: Use alternative RET encoding
	soc: fsl: select FSL_GUTS driver for DPIO
	Input: goodix - add compatible string for GT1158
	Linux 5.10.144

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ie5222afc95240a8f4b6b4b42d249a8d00eaf661f

Documentation/input/joydev/joystick.rst

@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
 * AVB Mag Turbo Force
 * AVB Top Shot Pegasus
 * AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
 * Logitech WingMan Force
 * Logitech WingMan Force Wheel
 * Guillemot Race Leader Force Feedback

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 143
+SUBLEVEL = 144
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/arm/boot/dts/imx28-evk.dts

@@ -129,7 +129,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "sst,sst25vf016b", "jedec,spi-nor";

arch/arm/boot/dts/imx28-m28evk.dts

@@ -33,7 +33,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "m25p80", "jedec,spi-nor";

arch/arm/boot/dts/imx28-sps1.dts

@@ -51,7 +51,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "everspin,mr25h256", "mr25h256";

arch/arm/boot/dts/imx6dl-rex-basic.dts

@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;

arch/arm/boot/dts/imx6q-ba16.dtsi

@@ -139,7 +139,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/imx6q-bx50v3.dtsi

@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;

arch/arm/boot/dts/imx6q-cm-fx6.dts

@@ -260,7 +260,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p", "jedec,spi-nor";

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -102,7 +102,7 @@
 	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;

arch/arm/boot/dts/imx6q-dms-ba16.dts

@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;

arch/arm/boot/dts/imx6q-gw5400-a.dts

@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;

arch/arm/boot/dts/imx6q-marsboard.dts

@@ -100,7 +100,7 @@
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;

arch/arm/boot/dts/imx6q-rex-pro.dts

@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;

arch/arm/boot/dts/imx6qdl-aristainetos.dtsi

@@ -96,7 +96,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";

arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi

@@ -131,7 +131,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";

arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi

@@ -35,7 +35,7 @@
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25vf040b", "jedec,spi-nor";

arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi

@@ -248,8 +248,8 @@
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: spi-flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};

arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi

@@ -179,7 +179,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;

arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

@@ -321,7 +321,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;