can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c

First part of adding support for Kvaser USB device family "hydra".

Split kvaser_usb.c into kvaser_usb/kvaser_usb{.h,_core.c,_leaf.c}.

kvaser_usb_core.c contains common functionality, such as USB
writing/reading and allocation of netdev.
kvaser_usb_leaf.c contains device specific code, used in
kvaser_usb_core.c.

struct kvaser_usb_dev_ops contains device specific functions that are
common for all devices in the family. While, struct kvaser_usb_dev_cfg
describes the device configurations in terms of CAN clock frequency,
timestamp frequency and CAN controller bittiming constants.

Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/usb/Makefile

@@ -7,7 +7,7 @@ obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o
 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
 obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
 obj-$(CONFIG_CAN_GS_USB) += gs_usb.o
-obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
+obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb/
 obj-$(CONFIG_CAN_MCBA_USB) += mcba_usb.o
 obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/
 obj-$(CONFIG_CAN_UCAN) += ucan.o

drivers/net/can/usb/kvaser_usb/Makefile

@@ -0,0 +1,2 @@
+obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
+kvaser_usb-y = kvaser_usb_core.o kvaser_usb_leaf.o

drivers/net/can/usb/kvaser_usb/kvaser_usb.h

@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Parts of this driver are based on the following:
+ *  - Kvaser linux leaf driver (version 4.78)
+ *  - CAN driver for esd CAN-USB/2
+ *  - Kvaser linux usbcanII driver (version 5.3)
+ *
+ * Copyright (C) 2002-2018 KVASER AB, Sweden. All rights reserved.
+ * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
+ * Copyright (C) 2012 Olivier Sobrie <olivier@sobrie.be>
+ * Copyright (C) 2015 Valeo S.A.
+ */
+
+#ifndef KVASER_USB_H
+#define KVASER_USB_H
+
+/* Kvaser USB CAN dongles are divided into two major families:
+ * - Leaf: Based on Renesas M32C, running firmware labeled as 'filo'
+ * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios'
+ */
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+
+#define KVASER_USB_MAX_RX_URBS			4
+#define KVASER_USB_MAX_TX_URBS			128
+#define KVASER_USB_TIMEOUT			1000 /* msecs */
+#define KVASER_USB_RX_BUFFER_SIZE		3072
+#define KVASER_USB_MAX_NET_DEVICES		3
+
+/* USB devices features */
+#define KVASER_USB_HAS_SILENT_MODE		BIT(0)
+#define KVASER_USB_HAS_TXRX_ERRORS		BIT(1)
+
+struct kvaser_usb_dev_cfg;
+
+enum kvaser_usb_leaf_family {
+	KVASER_LEAF,
+	KVASER_USBCAN,
+};
+
+struct kvaser_usb_dev_card_data {
+	u32 ctrlmode_supported;
+	struct {
+		enum kvaser_usb_leaf_family family;
+	} leaf;
+};
+
+/* Context for an outstanding, not yet ACKed, transmission */
+struct kvaser_usb_tx_urb_context {
+	struct kvaser_usb_net_priv *priv;
+	u32 echo_index;
+	int dlc;
+};
+
+struct kvaser_usb {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES];
+	const struct kvaser_usb_dev_ops *ops;
+	const struct kvaser_usb_dev_cfg *cfg;
+
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	struct usb_anchor rx_submitted;
+
+	/* @max_tx_urbs: Firmware-reported maximum number of outstanding,
+	 * not yet ACKed, transmissions on this device. This value is
+	 * also used as a sentinel for marking free tx contexts.
+	 */
+	u32 fw_version;
+	unsigned int nchannels;
+	unsigned int max_tx_urbs;
+	struct kvaser_usb_dev_card_data card_data;
+
+	bool rxinitdone;
+	void *rxbuf[KVASER_USB_MAX_RX_URBS];
+	dma_addr_t rxbuf_dma[KVASER_USB_MAX_RX_URBS];
+};
+
+struct kvaser_usb_net_priv {
+	struct can_priv can;
+	struct can_berr_counter bec;
+
+	struct kvaser_usb *dev;
+	struct net_device *netdev;
+	int channel;
+
+	struct completion start_comp, stop_comp;
+	struct usb_anchor tx_submitted;
+
+	spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */
+	int active_tx_contexts;
+	struct kvaser_usb_tx_urb_context tx_contexts[];
+};
+
+/**
+ * struct kvaser_usb_dev_ops - Device specific functions
+ * @dev_set_mode:		used for can.do_set_mode
+ * @dev_set_bittiming:		used for can.do_set_bittiming
+ * @dev_get_berr_counter:	used for can.do_get_berr_counter
+ *
+ * @dev_setup_endpoints:	setup USB in and out endpoints
+ * @dev_init_card:		initialize card
+ * @dev_get_software_info:	get software info
+ * @dev_get_card_info:		get card info
+ *
+ * @dev_set_opt_mode:		set ctrlmod
+ * @dev_start_chip:		start the CAN controller
+ * @dev_stop_chip:		stop the CAN controller
+ * @dev_reset_chip:		reset the CAN controller
+ * @dev_flush_queue:		flush outstanding CAN messages
+ * @dev_read_bulk_callback:	handle incoming commands
+ * @dev_frame_to_cmd:		translate struct can_frame into device command
+ */
+struct kvaser_usb_dev_ops {
+	int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode);
+	int (*dev_set_bittiming)(struct net_device *netdev);
+	int (*dev_get_berr_counter)(const struct net_device *netdev,
+				    struct can_berr_counter *bec);
+	int (*dev_setup_endpoints)(struct kvaser_usb *dev);
+	int (*dev_init_card)(struct kvaser_usb *dev);
+	int (*dev_get_software_info)(struct kvaser_usb *dev);
+	int (*dev_get_card_info)(struct kvaser_usb *dev);
+	int (*dev_set_opt_mode)(const struct kvaser_usb_net_priv *priv);
+	int (*dev_start_chip)(struct kvaser_usb_net_priv *priv);
+	int (*dev_stop_chip)(struct kvaser_usb_net_priv *priv);
+	int (*dev_reset_chip)(struct kvaser_usb *dev, int channel);
+	int (*dev_flush_queue)(struct kvaser_usb_net_priv *priv);
+	void (*dev_read_bulk_callback)(struct kvaser_usb *dev, void *buf,
+				       int len);
+	void *(*dev_frame_to_cmd)(const struct kvaser_usb_net_priv *priv,
+				  const struct sk_buff *skb, int *frame_len,
+				  int *cmd_len, u16 transid);
+};
+
+struct kvaser_usb_dev_cfg {
+	const struct can_clock clock;
+	const unsigned int timestamp_freq;
+	const struct can_bittiming_const * const bittiming_const;
+	const struct can_bittiming_const * const data_bittiming_const;
+};
+
+extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
+
+int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
+			int *actual_len);
+
+int kvaser_usb_send_cmd(const struct kvaser_usb *dev, void *cmd, int len);
+
+int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
+			      int len);
+
+int kvaser_usb_can_rx_over_error(struct net_device *netdev);
+#endif /* KVASER_USB_H */