usb: Introduce DesignWare USB3 DRD Driver

The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2026-01-06 11:08:10 -08:00 · 2011-08-19 18:10:58 +03:00
parent 500fdf8bec
commit 72246da40f
16 changed files with 5712 additions and 0 deletions
--- a/Documentation/usb/dwc3.txt
+++ b/Documentation/usb/dwc3.txt
@@ -0,0 +1,53 @@
+
+ TODO
+~~~~~~
+Please pick something while reading :)
+
+- Implement streaming support for BULK endpoints
+  Tatyana's patch "usb: Add streams support to the gadget framework"
+  introduces streaming support for the gadget driver.
+  Every usb_request has new field called stream_id which holds its id.
+  Every usb_ep has a field num_supported_strms which describes the max
+  number of streams supported (for this ep).
+  UAS is AFAIK the only gadget with streaming support.
+
+- Convert interrupt handler to per-ep-thread-irq
+
+  As it turns out some DWC3-commands ~1ms to complete. Currently we spin
+  until the command completes which is bad.
+
+  Implementation idea:
+  - dwc core implements a demultiplexing irq chip for interrupts per
+    endpoint. The interrupt numbers are allocated during probe and belong
+    to the device. If MSI provides per-endpoint interrupt this dummy
+    interrupt chip can be replaced with "real" interrupts.
+  - interrupts are requested / allocated on usb_ep_enable() and removed on
+    usb_ep_disable(). Worst case are 32 interrupts, the lower limit is two
+    for ep0/1.
+  - dwc3_send_gadget_ep_cmd() will sleep in wait_for_completion_timeout()
+    until the command completes.
+  - the interrupt handler is split into the following pieces:
+    - primary handler of the device
+      goes through every event and calls generic_handle_irq() for event
+      it. On return from generic_handle_irq() in acknowledges the event
+      counter so interrupt goes away (eventually).
+
+    - threaded handler of the device
+      none
+
+    - primary handler of the EP-interrupt
+      reads the event and tries to process it. Everything that requries
+      sleeping is handed over to the Thread. The event is saved in an
+      per-endpoint data-structure.
+      We probably have to pay attention not to process events once we
+      handed something to thread so we don't process event X prio Y
+      where X > Y.
+
+    - threaded handler of the EP-interrupt
+      handles the remaining EP work which might sleep such as waiting
+      for command completion.
+
+  Latency:
+   There should be no increase in latency since the interrupt-thread has a
+   high priority and will be run before an average task in user land
+   (except the user changed priorities).
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -111,6 +111,8 @@ config USB

 source "drivers/usb/core/Kconfig"

+source "drivers/usb/dwc3/Kconfig"
+
 source "drivers/usb/mon/Kconfig"

 source "drivers/usb/wusbcore/Kconfig"
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,6 +6,8 @@

 obj-$(CONFIG_USB)		+= core/

+obj-$(CONFIG_USB_DWC3)		+= dwc3/
+
 obj-$(CONFIG_USB_MON)		+= mon/

 obj-$(CONFIG_PCI)		+= host/
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -0,0 +1,25 @@
+config USB_DWC3
+	tristate "DesignWare USB3 DRD Core Support"
+	depends on (USB || USB_GADGET)
+	select USB_OTG_UTILS
+	help
+	  Say Y or M here if your system has a Dual Role SuperSpeed
+	  USB controller based on the DesignWare USB3 IP Core.
+
+	  If you choose to build this driver is a dynamically linked
+	  module, the module will be called dwc3.ko.
+
+if USB_DWC3
+
+config USB_DWC3_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages on DWC3 Driver.
+
+config USB_DWC3_VERBOSE
+	bool "Enable Verbose Debugging Messages"
+	depends on USB_DWC3_DEBUG
+	help
+	  Say Y here to enable verbose debugging messages on DWC3 Driver.
+
+endif
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -0,0 +1,36 @@
+ccflags-$(CONFIG_USB_DWC3_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_DWC3_VERBOSE)	+= -DVERBOSE_DEBUG
+
+obj-$(CONFIG_USB_DWC3)			+= dwc3.o
+
+dwc3-y					:= core.o
+
+ifneq ($(CONFIG_USB_GADGET_DWC3),)
+	dwc3-y				+= gadget.o ep0.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	dwc3-y				+= debugfs.o
+endif
+
+##
+# Platform-specific glue layers go here
+#
+# NOTICE: Make sure your glue layer doesn't depend on anything
+# which is arch-specific and that it compiles on all situations.
+#
+# We want to keep this requirement in order to be able to compile
+# the entire driver (with all its glue layers) on several architectures
+# and make sure it compiles fine. This will also help with allmodconfig
+# and allyesconfig builds.
+#
+# The only exception is the PCI glue layer, but that's only because
+# PCI doesn't provide nops if CONFIG_PCI isn't enabled.
+##
+
+obj-$(CONFIG_USB_DWC3)		+= dwc3-omap.o
+
+ifneq ($(CONFIG_PCI),)
+	obj-$(CONFIG_USB_DWC3)		+= dwc3-pci.o
+endif
+
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -0,0 +1,467 @@
+/**
+ * core.c - DesignWare USB3 DRD Controller Core file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#include "debug.h"
+
+/**
+ * dwc3_core_soft_reset - Issues core soft reset and PHY reset
+ * @dwc: pointer to our context structure
+ */
+static void dwc3_core_soft_reset(struct dwc3 *dwc)
+{
+	u32		reg;
+
+	/* Before Resetting PHY, put Core in Reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	/* Assert USB3 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	/* Assert USB2 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	mdelay(100);
+
+	/* Clear USB3 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	/* Clear USB2 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	/* After PHYs are stable we can take Core out of reset state */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+/**
+ * dwc3_free_one_event_buffer - Frees one event buffer
+ * @dwc: Pointer to our controller context structure
+ * @evt: Pointer to event buffer to be freed
+ */
+static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
+		struct dwc3_event_buffer *evt)
+{
+	dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma);
+	kfree(evt);
+}
+
+/**
+ * dwc3_alloc_one_event_buffer - Allocated one event buffer structure
+ * @dwc: Pointer to our controller context structure
+ * @length: size of the event buffer
+ *
+ * Returns a pointer to the allocated event buffer structure on succes
+ * otherwise ERR_PTR(errno).
+ */
+static struct dwc3_event_buffer *__devinit
+dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+	if (!evt)
+		return ERR_PTR(-ENOMEM);
+
+	evt->dwc	= dwc;
+	evt->length	= length;
+	evt->buf	= dma_alloc_coherent(dwc->dev, length,
+			&evt->dma, GFP_KERNEL);
+	if (!evt->buf) {
+		kfree(evt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return evt;
+}
+
+/**
+ * dwc3_free_event_buffers - frees all allocated event buffers
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_free_event_buffers(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int i;
+
+	for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+		evt = dwc->ev_buffs[i];
+		if (evt) {
+			dwc3_free_one_event_buffer(dwc, evt);
+			dwc->ev_buffs[i] = NULL;
+		}
+	}
+}
+
+/**
+ * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
+ * @dwc: Pointer to out controller context structure
+ * @num: number of event buffers to allocate
+ * @length: size of event buffer
+ *
+ * Returns 0 on success otherwise negative errno. In error the case, dwc
+ * may contain some buffers allocated but not all which were requested.
+ */
+static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num,
+		unsigned length)
+{
+	int			i;
+
+	for (i = 0; i < num; i++) {
+		struct dwc3_event_buffer	*evt;
+
+		evt = dwc3_alloc_one_event_buffer(dwc, length);
+		if (IS_ERR(evt)) {
+			dev_err(dwc->dev, "can't allocate event buffer\n");
+			return PTR_ERR(evt);
+		}
+		dwc->ev_buffs[i] = evt;
+	}
+
+	return 0;
+}
+
+/**
+ * dwc3_event_buffers_setup - setup our allocated event buffers
+ * @dwc: Pointer to out controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int				n;
+
+	for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+		evt = dwc->ev_buffs[n];
+		dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
+				evt->buf, (unsigned long long) evt->dma,
+				evt->length);
+
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
+				lower_32_bits(evt->dma));
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
+				upper_32_bits(evt->dma));
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
+				evt->length & 0xffff);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+	}
+
+	return 0;
+}
+
+static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int				n;
+
+	for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+		evt = dwc->ev_buffs[n];
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+	}
+}
+
+/**
+ * dwc3_core_init - Low-level initialization of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int __devinit dwc3_core_init(struct dwc3 *dwc)
+{
+	unsigned long		timeout;
+	u32			reg;
+	int			ret;
+
+	dwc3_core_soft_reset(dwc);
+
+	/* issue device SoftReset too */
+	timeout = jiffies + msecs_to_jiffies(500);
+	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		if (!(reg & DWC3_DCTL_CSFTRST))
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(dwc->dev, "Reset Timed Out\n");
+			ret = -ETIMEDOUT;
+			goto err0;
+		}
+
+		cpu_relax();
+	} while (true);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+	/* This should read as U3 followed by revision number */
+	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	dwc->revision = reg & DWC3_GSNPSREV_MASK;
+
+	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
+			DWC3_EVENT_BUFFERS_SIZE);
+	if (ret) {
+		dev_err(dwc->dev, "failed to allocate event buffers\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	dwc3_free_event_buffers(dwc);
+
+err0:
+	return ret;
+}
+
+static void dwc3_core_exit(struct dwc3 *dwc)
+{
+	dwc3_event_buffers_cleanup(dwc);
+	dwc3_free_event_buffers(dwc);
+}
+
+#define DWC3_ALIGN_MASK		(16 - 1)
+
+static int __devinit dwc3_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource		*res;
+	struct dwc3		*dwc;
+	void __iomem		*regs;
+	unsigned int		features = id->driver_data;
+	int			ret = -ENOMEM;
+	int			irq;
+	void			*mem;
+
+	mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
+	if (!mem) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		goto err0;
+	}
+	dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
+	dwc->mem = mem;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing resource\n");
+		goto err1;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+			dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "can't request mem region\n");
+		goto err1;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		goto err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing IRQ\n");
+		goto err3;
+	}
+
+	spin_lock_init(&dwc->lock);
+	platform_set_drvdata(pdev, dwc);
+
+	dwc->regs	= regs;
+	dwc->regs_size	= resource_size(res);
+	dwc->dev	= &pdev->dev;
+	dwc->irq	= irq;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_forbid(&pdev->dev);
+
+	ret = dwc3_core_init(dwc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize core\n");
+		goto err3;
+	}
+
+	if (features & DWC3_HAS_PERIPHERAL) {
+		ret = dwc3_gadget_init(dwc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to initialized gadget\n");
+			goto err4;
+		}
+	}
+
+	ret = dwc3_debugfs_init(dwc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize debugfs\n");
+		goto err5;
+	}
+
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+
+err5:
+	if (features & DWC3_HAS_PERIPHERAL)
+		dwc3_gadget_exit(dwc);
+
+err4:
+	dwc3_core_exit(dwc);
+
+err3:
+	iounmap(regs);
+
+err2:
+	release_mem_region(res->start, resource_size(res));
+
+err1:
+	kfree(dwc->mem);
+
+err0:
+	return ret;
+}
+
+static int __devexit dwc3_remove(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct dwc3	*dwc = platform_get_drvdata(pdev);
+	struct resource	*res;
+	unsigned int	features = id->driver_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	dwc3_debugfs_exit(dwc);
+
+	if (features & DWC3_HAS_PERIPHERAL)
+		dwc3_gadget_exit(dwc);
+
+	dwc3_core_exit(dwc);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(dwc->regs);
+	kfree(dwc->mem);
+
+	return 0;
+}
+
+static const struct platform_device_id dwc3_id_table[] __devinitconst = {
+	{
+		.name	= "dwc3-omap",
+		.driver_data = (DWC3_HAS_PERIPHERAL
+			| DWC3_HAS_XHCI
+			| DWC3_HAS_OTG),
+	},
+	{
+		.name	= "dwc3-pci",
+		.driver_data = DWC3_HAS_PERIPHERAL,
+	},
+	{  },	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, dwc3_id_table);
+
+static struct platform_driver dwc3_driver = {
+	.probe		= dwc3_probe,
+	.remove		= __devexit_p(dwc3_remove),
+	.driver		= {
+		.name	= "dwc3",
+	},
+	.id_table	= dwc3_id_table,
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
+
+static int __devinit dwc3_init(void)
+{
+	return platform_driver_register(&dwc3_driver);
+}
+module_init(dwc3_init);
+
+static void __exit dwc3_exit(void)
+{
+	platform_driver_unregister(&dwc3_driver);
+}
+module_exit(dwc3_exit);
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -0,0 +1,51 @@
+/**
+ * debug.h - DesignWare USB3 DRD Controller Debug Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "core.h"
+
+#ifdef CONFIG_DEBUG_FS
+extern int dwc3_debugfs_init(struct dwc3 *);
+extern void dwc3_debugfs_exit(struct dwc3 *);
+#else
+static inline int dwc3_debugfs_init(struct dwc3 *d)
+{  return 0;  }
+static inline void dwc3_debugfs_exit(struct dwc3 *d)
+{  }
+#endif
+
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -0,0 +1,410 @@
+/**
+ * dwc3-omap.c - OMAP Specific Glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include "io.h"
+
+/*
+ * All these registers belong to OMAP's Wrapper around the
+ * DesignWare USB3 Core.
+ */
+
+#define USBOTGSS_REVISION			0x0000
+#define USBOTGSS_SYSCONFIG			0x0010
+#define USBOTGSS_IRQ_EOI			0x0020
+#define USBOTGSS_IRQSTATUS_RAW_0		0x0024
+#define USBOTGSS_IRQSTATUS_0			0x0028
+#define USBOTGSS_IRQENABLE_SET_0		0x002c
+#define USBOTGSS_IRQENABLE_CLR_0		0x0030
+#define USBOTGSS_IRQSTATUS_RAW_1		0x0034
+#define USBOTGSS_IRQSTATUS_1			0x0038
+#define USBOTGSS_IRQENABLE_SET_1		0x003c
+#define USBOTGSS_IRQENABLE_CLR_1		0x0040
+#define USBOTGSS_UTMI_OTG_CTRL			0x0080
+#define USBOTGSS_UTMI_OTG_STATUS		0x0084
+#define USBOTGSS_MMRAM_OFFSET			0x0100
+#define USBOTGSS_FLADJ				0x0104
+#define USBOTGSS_DEBUG_CFG			0x0108
+#define USBOTGSS_DEBUG_DATA			0x010c
+
+/* SYSCONFIG REGISTER */
+#define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)
+#define USBOTGSS_SYSCONFIG_STANDBYMODE(x)	((x) << 4)
+#define USBOTGSS_SYSCONFIG_IDLEMODE(x)		((x) << 2)
+
+/* IRQ_EOI REGISTER */
+#define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)
+
+/* IRQS0 BITS */
+#define USBOTGSS_IRQO_COREIRQ_ST		(1 << 0)
+
+/* IRQ1 BITS */
+#define USBOTGSS_IRQ1_DMADISABLECLR		(1 << 17)
+#define USBOTGSS_IRQ1_OEVT			(1 << 16)
+#define USBOTGSS_IRQ1_DRVVBUS_RISE		(1 << 13)
+#define USBOTGSS_IRQ1_CHRGVBUS_RISE		(1 << 12)
+#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE		(1 << 11)
+#define USBOTGSS_IRQ1_IDPULLUP_RISE		(1 << 8)
+#define USBOTGSS_IRQ1_DRVVBUS_FALL		(1 << 5)
+#define USBOTGSS_IRQ1_CHRGVBUS_FALL		(1 << 4)
+#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL		(1 << 3)
+#define USBOTGSS_IRQ1_IDPULLUP_FALL		(1 << 0)
+
+/* UTMI_OTG_CTRL REGISTER */
+#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS		(1 << 5)
+#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS		(1 << 4)
+#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS	(1 << 3)
+#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP		(1 << 0)
+
+/* UTMI_OTG_STATUS REGISTER */
+#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE	(1 << 31)
+#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT	(1 << 9)
+#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
+#define USBOTGSS_UTMI_OTG_STATUS_IDDIG		(1 << 4)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSEND	(1 << 3)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID	(1 << 2)
+#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	(1 << 1)
+
+struct dwc3_omap {
+	/* device lock */
+	spinlock_t		lock;
+
+	struct platform_device	*dwc3;
+	struct device		*dev;
+
+	int			irq;
+	void __iomem		*base;
+
+	void			*context;
+	u32			resource_size;
+
+	u32			dma_status:1;
+};
+
+#ifdef CONFIG_PM
+static int dwc3_omap_suspend(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	memcpy_fromio(omap->context, omap->base, omap->resource_size);
+
+	return 0;
+}
+
+static int dwc3_omap_resume(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	memcpy_toio(omap->base, omap->context, omap->resource_size);
+
+	return 0;
+}
+
+static int dwc3_omap_idle(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+	u32			reg;
+
+	/* stop DMA Engine */
+	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	reg &= ~(USBOTGSS_SYSCONFIG_DMADISABLE);
+	dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(dwc3_omap_pm_ops, dwc3_omap_suspend,
+		dwc3_omap_resume, dwc3_omap_idle);
+
+#define DEV_PM_OPS	(&dwc3_omap_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
+	u32			reg;
+	u32			ctrl;
+
+	spin_lock(&omap->lock);
+
+	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1);
+	ctrl = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL);
+
+	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
+		dev_dbg(omap->base, "DMA Disable was Cleared\n");
+		omap->dma_status = false;
+	}
+
+	if (reg & USBOTGSS_IRQ1_OEVT)
+		dev_dbg(omap->base, "OTG Event\n");
+
+	if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE) {
+		dev_dbg(omap->base, "DRVVBUS Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_DRVVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE) {
+		dev_dbg(omap->base, "CHRGVBUS Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE) {
+		dev_dbg(omap->base, "DISCHRGVBUS Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE) {
+		dev_dbg(omap->base, "IDPULLUP Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_IDPULLUP;
+	}
+
+	if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL) {
+		dev_dbg(omap->base, "DRVVBUS Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DRVVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL) {
+		dev_dbg(omap->base, "CHRGVBUS Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL) {
+		dev_dbg(omap->base, "DISCHRGVBUS Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) {
+		dev_dbg(omap->base, "IDPULLUP Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_IDPULLUP;
+	}
+
+	dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL, ctrl);
+
+	spin_unlock(&omap->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit dwc3_omap_probe(struct platform_device *pdev)
+{
+	struct platform_device	*dwc3;
+	struct dwc3_omap	*omap;
+	struct resource		*res;
+
+	int			ret = -ENOMEM;
+	int			irq;
+
+	u32			reg;
+
+	void __iomem		*base;
+	void			*context;
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing IRQ resource\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "missing memory base resource\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	base = ioremap_nocache(res->start, resource_size(res));
+	if (!base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		goto err1;
+	}
+
+	dwc3 = platform_device_alloc("dwc3-omap", -1);
+	if (!dwc3) {
+		dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
+		goto err2;
+	}
+
+	context = kzalloc(resource_size(res), GFP_KERNEL);
+	if (!context) {
+		dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n");
+		goto err3;
+	}
+
+	spin_lock_init(&omap->lock);
+	dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask);
+
+	dwc3->dev.parent = &pdev->dev;
+	dwc3->dev.dma_mask = pdev->dev.dma_mask;
+	dwc3->dev.dma_parms = pdev->dev.dma_parms;
+	omap->resource_size = resource_size(res);
+	omap->context	= context;
+	omap->dev	= &pdev->dev;
+	omap->irq	= irq;
+	omap->base	= base;
+	omap->dwc3	= dwc3;
+
+	/* check the DMA Status */
+	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
+
+	ret = request_irq(omap->irq, dwc3_omap_interrupt, 0,
+			"dwc3-wrapper", omap);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
+				omap->irq, ret);
+		goto err4;
+	}
+
+	/* enable all IRQs */
+	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x01);
+
+	reg = (USBOTGSS_IRQ1_DMADISABLECLR |
+			USBOTGSS_IRQ1_OEVT |
+			USBOTGSS_IRQ1_DRVVBUS_RISE |
+			USBOTGSS_IRQ1_CHRGVBUS_RISE |
+			USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQ1_IDPULLUP_RISE |
+			USBOTGSS_IRQ1_DRVVBUS_FALL |
+			USBOTGSS_IRQ1_CHRGVBUS_FALL |
+			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQ1_IDPULLUP_FALL);
+
+	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+
+	ret = platform_device_add_resources(dwc3, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
+		goto err5;
+	}
+
+	ret = platform_device_add(dwc3);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register dwc3 device\n");
+		goto err5;
+	}
+
+	return 0;
+
+err5:
+	free_irq(omap->irq, omap);
+
+err4:
+	kfree(omap->context);
+
+err3:
+	platform_device_put(dwc3);
+
+err2:
+	iounmap(base);
+
+err1:
+	kfree(omap);
+
+err0:
+	return ret;
+}
+
+static int __devexit dwc3_omap_remove(struct platform_device *pdev)
+{
+	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
+
+	platform_device_unregister(omap->dwc3);
+
+	free_irq(omap->irq, omap);
+	iounmap(omap->base);
+
+	kfree(omap->context);
+	kfree(omap);
+
+	return 0;
+}
+
+static const struct of_device_id of_dwc3_matach[] = {
+	{
+		"ti,dwc3",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+
+static struct platform_driver dwc3_omap_driver = {
+	.probe		= dwc3_omap_probe,
+	.remove		= __devexit_p(dwc3_omap_remove),
+	.driver		= {
+		.name	= "omap-dwc3",
+		.pm	= DEV_PM_OPS,
+		.of_match_table	= of_dwc3_matach,
+	},
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
+
+static int __devinit dwc3_omap_init(void)
+{
+	return platform_driver_register(&dwc3_omap_driver);
+}
+module_init(dwc3_omap_init);
+
+static void __exit dwc3_omap_exit(void)
+{
+	platform_driver_unregister(&dwc3_omap_driver);
+}
+module_exit(dwc3_omap_exit);
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -0,0 +1,219 @@
+/**
+ * dwc3-pci.c - PCI Specific glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* FIXME define these in <linux/pci_ids.h> */
+#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
+
+#define DWC3_PCI_DEVS_POSSIBLE	32
+
+struct dwc3_pci {
+	struct device		*dev;
+	struct platform_device	*dwc3;
+};
+
+static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
+
+static int dwc3_pci_get_device_id(struct dwc3_pci *glue)
+{
+	int		id;
+
+again:
+	id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
+	if (id < DWC3_PCI_DEVS_POSSIBLE) {
+		int old;
+
+		old = test_and_set_bit(id, dwc3_pci_devs);
+		if (old)
+			goto again;
+	} else {
+		dev_err(glue->dev, "no space for new device\n");
+		id = -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id)
+{
+	int			ret;
+
+	if (id < 0)
+		return;
+
+	ret = test_bit(id, dwc3_pci_devs);
+	WARN(!ret, "Device: %s\nID %d not in use\n",
+			dev_driver_string(glue->dev), id);
+	clear_bit(id, dwc3_pci_devs);
+}
+
+static int __devinit dwc3_pci_probe(struct pci_dev *pci,
+		const struct pci_device_id *id)
+{
+	struct resource		res[2];
+	struct platform_device	*dwc3;
+	struct dwc3_pci		*glue;
+	int			ret = -ENOMEM;
+	int			devid;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pci->dev, "not enough memory\n");
+		goto err0;
+	}
+
+	glue->dev	= &pci->dev;
+
+	ret = pci_enable_device(pci);
+	if (ret) {
+		dev_err(&pci->dev, "failed to enable pci device\n");
+		goto err1;
+	}
+
+	pci_set_power_state(pci, PCI_D0);
+	pci_set_master(pci);
+
+	devid = dwc3_pci_get_device_id(glue);
+	if (devid < 0)
+		goto err2;
+
+	dwc3 = platform_device_alloc("dwc3-pci", devid);
+	if (!dwc3) {
+		dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
+		goto err3;
+	}
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc_usb3";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc_usb3";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(&pci->dev, "couldn't add resources to dwc3 device\n");
+		goto err4;
+	}
+
+	pci_set_drvdata(pci, glue);
+
+	dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask);
+
+	dwc3->dev.dma_mask = pci->dev.dma_mask;
+	dwc3->dev.dma_parms = pci->dev.dma_parms;
+	dwc3->dev.parent = &pci->dev;
+	glue->dwc3	= dwc3;
+
+	ret = platform_device_add(dwc3);
+	if (ret) {
+		dev_err(&pci->dev, "failed to register dwc3 device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	pci_set_drvdata(pci, NULL);
+	platform_device_put(dwc3);
+
+err3:
+	dwc3_pci_put_device_id(glue, devid);
+
+err2:
+	pci_disable_device(pci);
+
+err1:
+	kfree(pci);
+
+err0:
+	return ret;
+}
+
+static void __devexit dwc3_pci_remove(struct pci_dev *pci)
+{
+	struct dwc3_pci	*glue = pci_get_drvdata(pci);
+
+	dwc3_pci_put_device_id(glue, glue->dwc3->id);
+	platform_device_unregister(glue->dwc3);
+	pci_set_drvdata(pci, NULL);
+	pci_disable_device(pci);
+	kfree(glue);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
+	},
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
+
+static struct pci_driver dwc3_pci_driver = {
+	.name		= "pci-dwc3",
+	.id_table	= dwc3_pci_id_table,
+	.probe		= dwc3_pci_probe,
+	.remove		= __devexit_p(dwc3_pci_remove),
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
+
+static int __devinit dwc3_pci_init(void)
+{
+	return pci_register_driver(&dwc3_pci_driver);
+}
+module_init(dwc3_pci_init);
+
+static void __exit dwc3_pci_exit(void)
+{
+	pci_unregister_driver(&dwc3_pci_driver);
+}
+module_exit(dwc3_pci_exit);
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -0,0 +1,292 @@
+/**
+ * gadget.h - DesignWare USB3 DRD Gadget Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_GADGET_H
+#define __DRIVERS_USB_DWC3_GADGET_H
+
+#include <linux/list.h>
+#include <linux/usb/gadget.h>
+#include "io.h"
+
+struct dwc3;
+#define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
+#define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
+
+/**
+ * struct dwc3_gadget_ep_depcfg_param1 - DEPCMDPAR0 for DEPCFG command
+ * @interrupt_number: self-explanatory
+ * @reserved7_5: set to zero
+ * @xfer_complete_enable: event generated when transfer completed
+ * @xfer_in_progress_enable: event generated when transfer in progress
+ * @xfer_not_ready_enable: event generated when transfer not read
+ * @fifo_error_enable: generates events when FIFO Underrun (IN eps)
+ *	or FIFO Overrun (OUT) eps
+ * @reserved_12: set to zero
+ * @stream_event_enable: event generated on stream
+ * @reserved14_15: set to zero
+ * @binterval_m1: bInterval minus 1
+ * @stream_capable: this EP is capable of handling streams
+ * @ep_number: self-explanatory
+ * @bulk_based: Set to ‘1’ if this isochronous endpoint represents a bulk
+ *	data stream that ignores the relationship of bus time to the
+ *	intervals programmed in TRBs.
+ * @fifo_based: Set to ‘1’ if this isochronous endpoint represents a
+ *	FIFO-based data stream where TRBs have fixed values and are never
+ *	written back by the core.
+ */
+struct dwc3_gadget_ep_depcfg_param1 {
+	u32	interrupt_number:5;
+	u32	reserved7_5:3;		/* set to zero */
+	u32	xfer_complete_enable:1;
+	u32	xfer_in_progress_enable:1;
+	u32	xfer_not_ready_enable:1;
+	u32	fifo_error_enable:1;	/* IN-underrun, OUT-overrun */
+	u32	reserved12:1;		/* set to zero */
+	u32	stream_event_enable:1;
+	u32	reserved14_15:2;
+	u32	binterval_m1:8;		/* bInterval minus 1 */
+	u32	stream_capable:1;
+	u32	ep_number:5;
+	u32	bulk_based:1;
+	u32	fifo_based:1;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depcfg_param0 - Parameter 0 for DEPCFG
+ * @reserved0: set to zero
+ * @ep_type: Endpoint Type (control, bulk, iso, interrupt)
+ * @max_packet_size: max packet size in bytes
+ * @reserved16_14: set to zero
+ * @fifo_number: self-explanatory
+ * @burst_size: burst size minus 1
+ * @data_sequence_number: Must be 0 when an endpoint is initially configured
+ *	May be non-zero when an endpoint is configured after a power transition
+ *	that requires a save/restore.
+ * @ignore_sequence_number: Set to ‘1’ to avoid resetting the sequence
+ *	number. This setting is used by software to modify the DEPEVTEN
+ *	event enable bits without modifying other endpoint settings.
+ */
+struct dwc3_gadget_ep_depcfg_param0 {
+	u32	reserved0:1;
+	u32	ep_type:2;
+	u32	max_packet_size:11;
+	u32	reserved16_14:3;
+	u32	fifo_number:5;
+	u32	burst_size:4;
+	u32	data_sequence_number:5;
+	u32	ignore_sequence_number:1;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depxfercfg_param0 - Parameter 0 of DEPXFERCFG
+ * @number_xfer_resources: Defines the number of Transfer Resources allocated
+ *	to this endpoint.  This field must be set to 1.
+ * @reserved16_31: set to zero;
+ */
+struct dwc3_gadget_ep_depxfercfg_param0 {
+	u32		number_xfer_resources:16;
+	u32		reserved16_31:16;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER
+ * @transfer_desc_addr_low: Indicates the lower 32 bits of the external
+ *	memory's start address for the transfer descriptor. Because TRBs
+ *	must be aligned to a 16-byte boundary, the lower 4 bits of this
+ *	address must be 0.
+ */
+struct dwc3_gadget_ep_depstrtxfer_param1 {
+	u32		transfer_desc_addr_low;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER
+ * @transfer_desc_addr_high: Indicates the higher 32 bits of the external
+ *	memory’s start address for the transfer descriptor.
+ */
+struct dwc3_gadget_ep_depstrtxfer_param0 {
+	u32		transfer_desc_addr_high;
+} __packed;
+
+struct dwc3_gadget_ep_cmd_params {
+	union {
+		u32	raw;
+	} param2;
+
+	union {
+		u32	raw;
+		struct dwc3_gadget_ep_depcfg_param1 depcfg;
+		struct dwc3_gadget_ep_depstrtxfer_param1 depstrtxfer;
+	} param1;
+
+	union {
+		u32	raw;
+		struct dwc3_gadget_ep_depcfg_param0 depcfg;
+		struct dwc3_gadget_ep_depxfercfg_param0 depxfercfg;
+		struct dwc3_gadget_ep_depstrtxfer_param0 depstrtxfer;
+	} param0;
+} __packed;
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_request {
+	struct usb_request	request;
+	struct list_head	list;
+	struct dwc3_ep		*dep;
+
+	u8			epnum;
+	struct dwc3_trb_hw	*trb;
+	dma_addr_t		trb_dma;
+
+	unsigned		direction:1;
+	unsigned		mapped:1;
+	unsigned		queued:1;
+};
+#define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
+
+static inline struct dwc3_request *next_request(struct list_head *list)
+{
+	if (list_empty(list))
+		return NULL;
+
+	return list_first_entry(list, struct dwc3_request, list);
+}
+
+static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
+{
+	struct dwc3_ep		*dep = req->dep;
+
+	req->queued = true;
+	list_move_tail(&req->list, &dep->req_queued);
+}
+
+#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE)
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; }
+static inline void dwc3_gadget_exit(struct dwc3 *dwc) { }
+#endif
+
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status);
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event);
+void dwc3_ep0_out_start(struct dwc3 *dwc);
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+void dwc3_map_buffer_to_dma(struct dwc3_request *req);
+void dwc3_unmap_buffer_from_dma(struct dwc3_request *req);
+
+/**
+ * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
+ * @dwc: DesignWare USB3 Pointer
+ * @number: DWC endpoint number
+ *
+ * Caller should take care of locking
+ */
+static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
+{
+	u32			res_id;
+
+	res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number));
+
+	return DWC3_DEPCMD_GET_RSC_IDX(res_id);
+}
+
+/**
+ * dwc3_gadget_event_string - returns event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		return "Disconnect";
+	case DWC3_DEVICE_EVENT_RESET:
+		return "Reset";
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		return "Connection Done";
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		return "Link Status Change";
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		return "WakeUp";
+	case DWC3_DEVICE_EVENT_EOPF:
+		return "End-Of-Frame";
+	case DWC3_DEVICE_EVENT_SOF:
+		return "Start-Of-Frame";
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		return "Erratic Error";
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		return "Command Complete";
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		return "Overflow";
+	}
+
+	return "UNKNOWN";
+}
+
+/**
+ * dwc3_ep_event_string - returns event name
+ * @event: then event code
+ */
+static inline const char *dwc3_ep_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		return "Transfer Complete";
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		return "Transfer In-Progress";
+	case DWC3_DEPEVT_XFERNOTREADY:
+		return "Transfer Not Ready";
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		return "FIFO";
+	case DWC3_DEPEVT_STREAMEVT:
+		return "Stream";
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		return "Endpoint Command Complete";
+	}
+
+	return "UNKNOWN";
+}
+
+#endif /* __DRIVERS_USB_DWC3_GADGET_H */
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -0,0 +1,55 @@
+/**
+ * io.h - DesignWare USB3 DRD IO Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_IO_H
+#define __DRIVERS_USB_DWC3_IO_H
+
+#include <asm/io.h>
+
+static inline u32 dwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+#endif /* __DRIVERS_USB_DWC3_IO_H */
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -303,6 +303,18 @@ config USB_PXA_U2O
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.

+config USB_GADGET_DWC3
+	tristate "DesignWare USB3.0 (DRD) Controller"
+	depends on USB_DWC3
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
+	help
+	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
+	  which can be configured for peripheral-only, host-only, hub-only
+	  and Dual-Role operation. This Controller was first integrated into
+	  the OMAP5 series of processors. More information about the OMAP5
+	  version of this controller, refer to http://www.ti.com/omap5.
+
 #
 # Controllers available in both integrated and discrete versions
 #