Merge 5.10.114 into android12-5.10-lts

Changes in 5.10.114 floppy: disable FDRAWCMD by default lightnvm: disable the subsystem usb: mtu3: fix USB 3.0 dual-role-switch from device to host USB: quirks: add a Realtek card reader USB: quirks: add STRING quirk for VCOM device USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader USB: serial: option: add support for Cinterion MV32-WA/MV32-WB USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions xhci: Enable runtime PM on second Alderlake controller xhci: stop polling roothubs after shutdown xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms iio: dac: ad5592r: Fix the missing return value. iio: dac: ad5446: Fix read_raw not returning set value iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on() iio: imu: inv_icm42600: Fix I2C init possible nack usb: misc: fix improper handling of refcount in uss720_probe() usb: typec: ucsi: Fix reuse of completion structure usb: typec: ucsi: Fix role swapping usb: gadget: uvc: Fix crash when encoding data for usb request usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() usb: dwc3: Try usb-role-switch first in dwc3_drd_init usb: dwc3: core: Fix tx/rx threshold settings usb: dwc3: core: Only handle soft-reset in DCTL usb: dwc3: gadget: Return proper request status usb: cdns3: Fix issue for clear halt endpoint usb: phy: generic: Get the vbus supply serial: imx: fix overrun interrupts in DMA mode serial: 8250: Also set sticky MCR bits in console restoration serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device arch_topology: Do not set llc_sibling if llc_id is invalid pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config hex2bin: make the function hex_to_bin constant-time hex2bin: fix access beyond string end riscv: patch_text: Fixup last cpu should be master x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests iocost: don't reset the inuse weight of under-weighted debtors video: fbdev: udlfb: properly check endpoint type arm64: dts: meson: remove CPU opps below 1GHz for G12B boards arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards iio:imu:bmi160: disable regulator in error path mtd: rawnand: fix ecc parameters for mt7622 USB: Fix xhci event ring dequeue pointer ERDP update issue ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe phy: samsung: exynos5250-sata: fix missing device put in probe error paths ARM: OMAP2+: Fix refcount leak in omap_gic_of_init bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe ARM: dts: Fix mmc order for omap3-gta04 ARM: dts: am3517-evm: Fix misc pinmuxing ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 ipvs: correctly print the memory size of ip_vs_conn_tab pinctrl: mediatek: moore: Fix build error mtd: rawnand: Fix return value check of wait_for_completion_timeout mtd: fix 'part' field data corruption in mtd_info pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode net: dsa: Add missing of_node_put() in dsa_port_link_register_of netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook pinctrl: rockchip: fix RK3308 pinmux bits tcp: md5: incorrect tcp_header_len for incoming connections pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested tcp: ensure to use the most recently sent skb when filling the rate sample wireguard: device: check for metadata_dst with skb_valid_dst() sctp: check asoc strreset_chunk in sctp_generate_reconf_event ARM: dts: imx6ull-colibri: fix vqmmc regulator arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock pinctrl: pistachio: fix use of irq_of_parse_and_map() cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe net: hns3: modify the return code of hclge_get_ring_chain_from_mbx net: hns3: add validity check for message data length net: hns3: add return value for mailbox handling in PF net/smc: sync err code when tcp connection was refused ip_gre: Make o_seqno start from 0 in native mode ip6_gre: Make o_seqno start from 0 in native mode ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT tcp: make sure treq->af_specific is initialized bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() net: bcmgenet: hide status block before TX timestamping net: phy: marvell10g: fix return value on error net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK drm/amdkfd: Fix GWS queue count drm/amd/display: Fix memory leak in dcn21_clock_source_create tls: Skip tls_append_frag on zero copy size bnx2x: fix napi API usage sequence net: fec: add missing of_node_put() in fec_enet_init_stop_mode() ixgbe: ensure IPsec VF<->PF compatibility ibmvnic: fix miscellaneous checks Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits" tcp: fix F-RTO may not work correctly when receiving DSACK ASoC: Intel: soc-acpi: correct device endpoints for max98373 ASoC: wm8731: Disable the regulator when probing fails ext4: fix bug_on in start_this_handle during umount filesystem x86: __memcpy_flushcache: fix wrong alignment if size > 2^32 cifs: destage any unwritten data to the server before calling copychunk_write drivers: net: hippi: Fix deadlock in rr_close() powerpc/perf: Fix 32bit compile zonefs: Fix management of open zones zonefs: Clear inode information flags on inode creation kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses net: ethernet: stmmac: fix write to sgmii_adapter_base thermal: int340x: Fix attr.show callback prototype x86/cpu: Load microcode during restore_processor_state() perf symbol: Pass is_kallsyms to symbols__fixup_end() perf symbol: Update symbols__fixup_end() tty: n_gsm: fix restart handling via CLD command tty: n_gsm: fix decoupled mux resource tty: n_gsm: fix mux cleanup after unregister tty device tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2 tty: n_gsm: fix malformed counter for out of frame data netfilter: nft_socket: only do sk lookups when indev is available tty: n_gsm: fix insufficient txframe size tty: n_gsm: fix wrong DLCI release order tty: n_gsm: fix missing explicit ldisc flush tty: n_gsm: fix wrong command retry handling tty: n_gsm: fix wrong command frame length field encoding tty: n_gsm: fix reset fifo race condition tty: n_gsm: fix incorrect UA handling tty: n_gsm: fix software flow control handling perf symbol: Remove arch__symbols__fixup_end() Linux 5.10.114 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I5bae5ef7c58046213b62c82599707f569a955337
2026-01-06 11:08:10 -08:00 · 2022-05-12 17:48:27 +02:00
parent 681997eca1 f40e35e79c
commit 6273d79c86
122 changed files with 1014 additions and 691 deletions
--- a/2
+++ b/2
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 113
+SUBLEVEL = 114
 EXTRAVERSION =
 NAME = Dare mighty things

--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -161,6 +161,8 @@

 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };

 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };

 &davinci_mdio {
@@ -193,6 +197,8 @@
 };

 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };

 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };

@@ -223,6 +231,8 @@
 };

 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };

@@ -231,8 +241,35 @@
 };

 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};

 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };

 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;

 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };

 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;

 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@

 &omap3_pmx_core {

+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -91,7 +91,7 @@

 			spi1: spi@fc018000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -149,7 +149,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -219,6 +219,12 @@
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
 		};
 	};

--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -286,6 +286,8 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
@@ -516,8 +518,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};

@@ -810,6 +810,12 @@
 		>;
 	};

+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@

 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
 	};
 };

-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};

 	ldo_3v3: fixedregulator {
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -20,7 +20,6 @@ menuconfig ARCH_EXYNOS
 	select EXYNOS_PMU
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
-	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)

 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);

 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);

 skip_errata_init:
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;

-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
@@ -71,26 +51,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;

-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;

-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <731000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <731000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
@@ -76,26 +56,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;

-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <751000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <667000000>;
-			opp-microvolt = <751000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -95,26 +95,6 @@
 		compatible = "operating-points-v2";
 		opp-shared;

-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-250000000 {
-			opp-hz = /bits/ 64 <250000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <730000>;
-		};
-
-		opp-667000000 {
-			opp-hz = /bits/ 64 <666666666>;
-			opp-microvolt = <750000>;
-		};
-
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -59,6 +59,10 @@
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;

+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "buck1";
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -5,11 +5,11 @@ ifdef CONFIG_COMPAT
 obj-$(CONFIG_PERF_EVENTS)	+= callchain_32.o
 endif

-obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o bhrb.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= core-book3s.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o \
 				   isa207-common.o power8-pmu.o power9-pmu.o \
-				   generic-compat-pmu.o power10-pmu.o
+				   generic-compat-pmu.o power10-pmu.o bhrb.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o

 obj-$(CONFIG_PPC_POWERNV)	+= imc-pmu.o
--- a/arch/riscv/kernel/patch.c
+++ b/arch/riscv/kernel/patch.c
@@ -100,7 +100,7 @@ static int patch_text_cb(void *data)
 	struct patch_insn *patch = data;
 	int ret = 0;

-	if (atomic_inc_return(&patch->cpu_count) == 1) {
+	if (atomic_inc_return(&patch->cpu_count) == num_online_cpus()) {
 		ret =
 		    patch_text_nosync(patch->addr, &patch->insn,
 					    GET_INSN_LENGTH(patch->insn));
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -133,11 +133,13 @@ extern void load_ucode_ap(void);
 void reload_early_microcode(void);
 extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
 extern bool initrd_gone;
+void microcode_bsp_resume(void);
 #else
 static inline int __init microcode_init(void)			{ return 0; };
 static inline void __init load_ucode_bsp(void)			{ }
 static inline void load_ucode_ap(void)				{ }
 static inline void reload_early_microcode(void)			{ }
+static inline void microcode_bsp_resume(void)			{ }
 static inline bool
 get_builtin_firmware(struct cpio_data *cd, const char *name)	{ return false; }
 #endif
--- a/Show More
+++ b/Show More