You've already forked linux-rockchip
mirror of
https://github.com/armbian/linux-rockchip.git
synced 2026-01-06 11:08:10 -08:00
Merge 5.10.94 into android12-5.10-lts
Changes in 5.10.94
KVM: VMX: switch blocked_vcpu_on_cpu_lock to raw spinlock
HID: uhid: Fix worker destroying device without any protection
HID: wacom: Reset expected and received contact counts at the same time
HID: wacom: Ignore the confidence flag when a touch is removed
HID: wacom: Avoid using stale array indicies to read contact count
f2fs: fix to do sanity check in is_alive()
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings
mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
mtd: Fixed breaking list in __mtd_del_partition.
mtd: rawnand: davinci: Don't calculate ECC when reading page
mtd: rawnand: davinci: Avoid duplicated page read
mtd: rawnand: davinci: Rewrite function description
x86/gpu: Reserve stolen memory for first integrated Intel GPU
tools/nolibc: x86-64: Fix startup code bug
tools/nolibc: i386: fix initial stack alignment
tools/nolibc: fix incorrect truncation of exit code
rtc: cmos: take rtc_lock while reading from CMOS
media: v4l2-ioctl.c: readbuffers depends on V4L2_CAP_READWRITE
media: flexcop-usb: fix control-message timeouts
media: mceusb: fix control-message timeouts
media: em28xx: fix control-message timeouts
media: cpia2: fix control-message timeouts
media: s2255: fix control-message timeouts
media: dib0700: fix undefined behavior in tuner shutdown
media: redrat3: fix control-message timeouts
media: pvrusb2: fix control-message timeouts
media: stk1160: fix control-message timeouts
media: cec-pin: fix interrupt en/disable handling
can: softing_cs: softingcs_probe(): fix memleak on registration failure
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
iommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure
gpu: host1x: Add back arm_iommu_detach_device()
dma_fence_array: Fix PENDING_ERROR leak in dma_fence_array_signaled()
PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
mm_zone: add function to check if managed dma zone exists
dma/pool: create dma atomic pool only if dma zone has managed pages
mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages
shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode
drm/ttm: Put BO in its memory manager's lru list
Bluetooth: L2CAP: Fix not initializing sk_peer_pid
drm/bridge: display-connector: fix an uninitialized pointer in probe()
drm: fix null-ptr-deref in drm_dev_init_release()
drm/panel: kingdisplay-kd097d04: Delete panel on attach() failure
drm/panel: innolux-p079zca: Delete panel on attach() failure
drm/rockchip: dsi: Fix unbalanced clock on probe error
drm/rockchip: dsi: Hold pm-runtime across bind/unbind
drm/rockchip: dsi: Disable PLL clock on bind error
drm/rockchip: dsi: Reconfigure hardware on resume()
Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails
clk: bcm-2835: Pick the closest clock rate
clk: bcm-2835: Remove rounding up the dividers
drm/vc4: hdmi: Set a default HSM rate
wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND
wcn36xx: Fix DMA channel enable/disable cycle
wcn36xx: Release DMA channel descriptor allocations
wcn36xx: Put DXE block into reset before freeing memory
wcn36xx: populate band before determining rate on RX
wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware
mtd: hyperbus: rpc-if: Check return value of rpcif_sw_init()
media: videobuf2: Fix the size printk format
media: atomisp: add missing media_device_cleanup() in atomisp_unregister_entities()
media: atomisp: fix punit_ddr_dvfs_enable() argument for mrfld_power up case
media: atomisp: fix inverted logic in buffers_needed()
media: atomisp: do not use err var when checking port validity for ISP2400
media: atomisp: fix inverted error check for ia_css_mipi_is_source_port_valid()
media: atomisp: fix ifdefs in sh_css.c
media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_cmd.c
media: atomisp: add NULL check for asd obtained from atomisp_video_pipe
media: atomisp: fix enum formats logic
media: atomisp: fix uninitialized bug in gmin_get_pmic_id_and_addr()
media: aspeed: fix mode-detect always time out at 2nd run
media: em28xx: fix memory leak in em28xx_init_dev
media: aspeed: Update signal status immediately to ensure sane hw state
arm64: dts: amlogic: meson-g12: Fix GPU operating point table node name
arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
fs: dlm: use sk->sk_socket instead of con->sock
fs: dlm: don't call kernel_getpeername() in error_report()
memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails
Bluetooth: stop proccessing malicious adv data
ath11k: Fix ETSI regd with weather radar overlap
ath11k: clear the keys properly via DISABLE_KEY
ath11k: reset RSN/WPA present state for open BSS
tee: fix put order in teedev_close_context()
fs: dlm: fix build with CONFIG_IPV6 disabled
drm/vboxvideo: fix a NULL vs IS_ERR() check
arm64: dts: renesas: cat875: Add rx/tx delays
media: dmxdev: fix UAF when dvb_register_device() fails
crypto: qce - fix uaf on qce_ahash_register_one
crypto: qce - fix uaf on qce_skcipher_register_one
mtd: hyperbus: rpc-if: fix bug in rpcif_hb_remove
ARM: dts: stm32: fix dtbs_check warning on ili9341 dts binding on stm32f429 disco
crypto: qat - fix spelling mistake: "messge" -> "message"
crypto: qat - remove unnecessary collision prevention step in PFVF
crypto: qat - make pfvf send message direction agnostic
crypto: qat - fix undetected PFVF timeout in ACK loop
ath11k: Use host CE parameters for CE interrupts configuration
arm64: dts: ti: k3-j721e: correct cache-sets info
tty: serial: atmel: Check return code of dmaengine_submit()
tty: serial: atmel: Call dma_async_issue_pending()
mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP
mfd: atmel-flexcom: Use .resume_noirq
media: rcar-csi2: Correct the selection of hsfreqrange
media: imx-pxp: Initialize the spinlock prior to using it
media: si470x-i2c: fix possible memory leak in si470x_i2c_probe()
media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released
media: coda: fix CODA960 JPEG encoder buffer overflow
media: venus: pm_helpers: Control core power domain manually
media: venus: core, venc, vdec: Fix probe dependency error
media: venus: core: Fix a potential NULL pointer dereference in an error handling path
media: venus: core: Fix a resource leak in the error handling path of 'venus_probe()'
thermal/drivers/imx: Implement runtime PM support
netfilter: bridge: add support for pppoe filtering
arm64: dts: qcom: msm8916: fix MMC controller aliases
cgroup: Trace event cgroup id fields should be u64
ACPI: EC: Rework flushing of EC work while suspended to idle
thermal/drivers/imx8mm: Enable ADC when enabling monitor
drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()
drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
tty: serial: uartlite: allow 64 bit address
serial: amba-pl011: do not request memory region twice
floppy: Fix hang in watchdog when disk is ejected
staging: rtl8192e: return error code from rtllib_softmac_init()
staging: rtl8192e: rtllib_module: fix error handle case in alloc_rtllib()
Bluetooth: btmtksdio: fix resume failure
sched/fair: Fix detection of per-CPU kthreads waking a task
sched/fair: Fix per-CPU kthread and wakee stacking for asym CPU capacity
bpf: Adjust BTF log size limit.
bpf: Disallow BPF_LOG_KERNEL log level for bpf(BPF_BTF_LOAD)
bpf: Remove config check to enable bpf support for branch records
arm64: lib: Annotate {clear, copy}_page() as position-independent
arm64: clear_page() shouldn't use DC ZVA when DCZID_EL0.DZP == 1
media: dib8000: Fix a memleak in dib8000_init()
media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()
media: si2157: Fix "warm" tuner state detection
wireless: iwlwifi: Fix a double free in iwl_txq_dyn_alloc_dma
sched/rt: Try to restart rt period timer when rt runtime exceeded
drm/msm/dp: displayPort driver need algorithm rational
rcu/exp: Mark current CPU as exp-QS in IPI loop second pass
mwifiex: Fix possible ABBA deadlock
xfrm: fix a small bug in xfrm_sa_len()
x86/uaccess: Move variable into switch case statement
selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
selftests: harness: avoid false negatives if test has no ASSERTs
crypto: stm32 - Fix last sparse warning in stm32_cryp_check_ctr_counter
crypto: stm32/cryp - fix CTR counter carry
crypto: stm32/cryp - fix xts and race condition in crypto_engine requests
crypto: stm32/cryp - check early input data
crypto: stm32/cryp - fix double pm exit
crypto: stm32/cryp - fix lrw chaining mode
crypto: stm32/cryp - fix bugs and crash in tests
crypto: stm32 - Revert broken pm_runtime_resume_and_get changes
ath11k: Fix deleting uninitialized kernel timer during fragment cache flush
ARM: dts: gemini: NAS4220-B: fis-index-block with 128 KiB sectors
media: dw2102: Fix use after free
media: msi001: fix possible null-ptr-deref in msi001_probe()
media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes
ath11k: Fix a NULL pointer dereference in ath11k_mac_op_hw_scan()
arm64: dts: qcom: c630: Fix soundcard setup
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
drm/msm/dpu: fix safe status debugfs file
drm/bridge: ti-sn65dsi86: Set max register for regmap
drm/tegra: vic: Fix DMA API misuse
media: hantro: Fix probe func error path
xfrm: interface with if_id 0 should return error
xfrm: state and policy should fail if XFRMA_IF_ID 0
ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
usb: ftdi-elan: fix memory leak on device disconnect
arm64: dts: marvell: cn9130: add GPIO and SPI aliases
arm64: dts: marvell: cn9130: enable CP0 GPIO controllers
ARM: dts: armada-38x: Add generic compatible to UART nodes
iwlwifi: mvm: fix 32-bit build in FTM
iwlwifi: mvm: test roc running status bits before removing the sta
mmc: meson-mx-sdhc: add IRQ check
mmc: meson-mx-sdio: add IRQ check
selinux: fix potential memleak in selinux_add_opt()
um: fix ndelay/udelay defines
um: virtio_uml: Fix time-travel external time propagation
Bluetooth: L2CAP: Fix using wrong mode
bpftool: Enable line buffering for stdout
backlight: qcom-wled: Validate enabled string indices in DT
backlight: qcom-wled: Pass number of elements to read to read_u32_array
backlight: qcom-wled: Fix off-by-one maximum with default num_strings
backlight: qcom-wled: Override default length with qcom,enabled-strings
backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
backlight: qcom-wled: Respect enabled-strings in set_brightness
software node: fix wrong node passed to find nargs_prop
Bluetooth: hci_qca: Stop IBS timer during BT OFF
x86/boot/compressed: Move CLANG_FLAGS to beginning of KBUILD_CFLAGS
hwmon: (mr75203) fix wrong power-up delay value
x86/mce/inject: Avoid out-of-bounds write when setting flags
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
power: reset: mt6397: Check for null res pointer
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
bpf: Don't promote bogus looking registers after null check.
bpf: Fix SO_RCVBUF/SO_SNDBUF handling in _bpf_setsockopt().
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
ppp: ensure minimum packet size in ppp_write()
rocker: fix a sleeping in atomic bug
staging: greybus: audio: Check null pointer
fsl/fman: Check for null pointer after calling devm_ioremap
Bluetooth: hci_bcm: Check for error irq
Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad
debugfs: lockdown: Allow reading debugfs files that are not world readable
net/mlx5e: Fix page DMA map/unmap attributes
net/mlx5e: Don't block routes with nexthop objects in SW
Revert "net/mlx5e: Block offload of outer header csum for UDP tunnels"
net/mlx5: Set command entry semaphore up once got index free
lib/mpi: Add the return value check of kcalloc()
Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt()
spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
ax25: uninitialized variable in ax25_setsockopt()
netrom: fix api breakage in nr_setsockopt()
regmap: Call regmap_debugfs_exit() prior to _init()
can: mcp251xfd: add missing newline to printed strings
tpm: add request_locality before write TPM_INT_ENABLE
tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
can: softing: softing_startstop(): fix set but not used variable warning
can: xilinx_can: xcan_probe(): check for error irq
pcmcia: fix setting of kthread task states
iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_ftm_rtt_smoothing()
net: mcs7830: handle usb read errors properly
ext4: avoid trim error on fs with small groups
ALSA: jack: Add missing rwsem around snd_ctl_remove() calls
ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls
ALSA: hda: Add missing rwsem around snd_ctl_remove() calls
RDMA/bnxt_re: Scan the whole bitmap when checking if "disabling RCFW with pending cmd-bit"
RDMA/hns: Validate the pkey index
scsi: pm80xx: Update WARN_ON check in pm8001_mpi_build_cmd()
clk: imx8mn: Fix imx8mn_clko1_sels
powerpc/prom_init: Fix improper check of prom_getprop()
ASoC: uniphier: drop selecting non-existing SND_SOC_UNIPHIER_AIO_DMA
dt-bindings: thermal: Fix definition of cooling-maps contribution property
powerpc/64s: Convert some cpu_setup() and cpu_restore() functions to C
powerpc/perf: MMCR0 control for PMU registers under PMCC=00
powerpc/perf: move perf irq/nmi handling details into traps.c
powerpc/irq: Add helper to set regs->softe
powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC
powerpc/32s: Fix shift-out-of-bounds in KASAN init
clocksource: Reduce clocksource-skew threshold
clocksource: Avoid accidental unstable marking of clocksources
ALSA: oss: fix compile error when OSS_DEBUG is enabled
ALSA: usb-audio: Drop superfluous '0' in Presonus Studio 1810c's ID
char/mwave: Adjust io port register size
binder: fix handling of error during copy
openrisc: Add clone3 ABI wrapper
iommu/io-pgtable-arm: Fix table descriptor paddr formatting
scsi: ufs: Fix race conditions related to driver data
RDMA/qedr: Fix reporting max_{send/recv}_wr attrs
PCI/MSI: Fix pci_irq_vector()/pci_irq_get_affinity()
powerpc/powermac: Add additional missing lockdep_register_key()
RDMA/core: Let ib_find_gid() continue search even after empty entry
RDMA/cma: Let cma_resolve_ib_dev() continue search even after empty entry
ASoC: rt5663: Handle device_property_read_u32_array error codes
of: unittest: fix warning on PowerPC frame size warning
of: unittest: 64 bit dma address test requires arch support
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
mips: add SYS_HAS_CPU_MIPS64_R5 config for MIPS Release 5 support
mips: fix Kconfig reference to PHYS_ADDR_T_64BIT
dmaengine: pxa/mmp: stop referencing config->slave_id
iommu/amd: Remove iommu_init_ga()
iommu/amd: Restore GA log/tail pointer on host resume
ASoC: Intel: catpt: Test dmaengine_submit() result before moving on
iommu/iova: Fix race between FQ timeout and teardown
scsi: block: pm: Always set request queue runtime active in blk_post_runtime_resume()
phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
ASoC: mediatek: Check for error clk pointer
ASoC: samsung: idma: Check of ioremap return value
misc: lattice-ecp3-config: Fix task hung when firmware load failed
counter: stm32-lptimer-cnt: remove iio counter abi
arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering
arm64: tegra: Remove non existent Tegra194 reset
mips: lantiq: add support for clk_set_parent()
mips: bcm63xx: add support for clk_set_parent()
powerpc/xive: Add missing null check after calling kmalloc
ASoC: fsl_mqs: fix MODULE_ALIAS
RDMA/cxgb4: Set queue pair state when being queried
ASoC: fsl_asrc: refine the check of available clock divider
clk: bm1880: remove kfrees on static allocations
of: base: Fix phandle argument length mismatch error message
ARM: dts: omap3-n900: Fix lp5523 for multi color
Bluetooth: Fix debugfs entry leak in hci_register_dev()
fs: dlm: filter user dlm messages for kernel locks
drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y
selftests/bpf: Fix bpf_object leak in skb_ctx selftest
ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR
drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR
media: atomisp: fix try_fmt logic
media: atomisp: set per-device's default mode
media: atomisp-ov2680: Fix ov2680_set_fmt() clobbering the exposure
ARM: shmobile: rcar-gen2: Add missing of_node_put()
batman-adv: allow netlink usage in unprivileged containers
media: atomisp: handle errors at sh_css_create_isp_params()
ath11k: Fix crash caused by uninitialized TX ring
usb: gadget: f_fs: Use stream_open() for endpoint files
drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L
HID: apple: Do not reset quirks when the Fn key is not found
media: b2c2: Add missing check in flexcop_pci_isr:
EDAC/synopsys: Use the quirk for version instead of ddr version
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
drm/amd/display: check top_pipe_to_program pointer
drm/amdgpu/display: set vblank_disable_immediate for DC
soc: ti: pruss: fix referenced node in error message
mlxsw: pci: Add shutdown method in PCI driver
drm/bridge: megachips: Ensure both bridges are probed before registration
tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use
HSI: core: Fix return freed object in hsi_new_client
crypto: jitter - consider 32 LSB for APT
mwifiex: Fix skb_over_panic in mwifiex_usb_recv()
rsi: Fix use-after-free in rsi_rx_done_handler()
rsi: Fix out-of-bounds read in rsi_read_pkt()
ath11k: Avoid NULL ptr access during mgmt tx cleanup
media: venus: avoid calling core_clk_setrate() concurrently during concurrent video sessions
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
usb: uhci: add aspeed ast2600 uhci support
floppy: Add max size check for user space request
x86/mm: Flush global TLB when switching to trampoline page-table
drm: rcar-du: Fix CRTC timings when CMM is used
media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.
media: rcar-vin: Update format alignment constraints
media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
media: m920x: don't use stack on USB reads
thunderbolt: Runtime PM activate both ends of the device link
iwlwifi: mvm: synchronize with FW after multicast commands
iwlwifi: mvm: avoid clearing a just saved session protection id
ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work
ath10k: Fix tx hanging
net-sysfs: update the queue counts in the unregistration path
net: phy: prefer 1000baseT over 1000baseKX
gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock
selftests/ftrace: make kprobe profile testcase description unique
ath11k: Avoid false DEADLOCK warning reported by lockdep
x86/mce: Allow instrumentation during task work queueing
x86/mce: Mark mce_panic() noinstr
x86/mce: Mark mce_end() noinstr
x86/mce: Mark mce_read_aux() noinstr
net: bonding: debug: avoid printing debug logs when bond is not notifying peers
bpf: Do not WARN in bpf_warn_invalid_xdp_action()
HID: quirks: Allow inverting the absolute X/Y values
media: igorplugusb: receiver overflow should be reported
media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO
audit: ensure userspace is penalized the same as the kernel when under pressure
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
arm64: tegra: Adjust length of CCPLEX cluster MMIO region
PM: runtime: Add safety net to supplier device release
cpufreq: Fix initialization of min and max frequency QoS requests
usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
rtw88: 8822c: update rx settings to prevent potential hw deadlock
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
iwlwifi: fix leaks/bad data after failed firmware load
iwlwifi: remove module loading failure message
iwlwifi: mvm: Fix calculation of frame length
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
um: registers: Rename function names to avoid conflicts and build problems
ath11k: Fix napi related hang
Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES
xfrm: rate limit SA mapping change message to user space
drm/etnaviv: consider completed fence seqno in hang check
jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions
ACPICA: Utilities: Avoid deleting the same object twice in a row
ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
ACPICA: Fix wrong interpretation of PCC address
ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
drm/amdgpu: fixup bad vram size on gmc v8
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
ACPI: battery: Add the ThinkPad "Not Charging" quirk
btrfs: remove BUG_ON() in find_parent_nodes()
btrfs: remove BUG_ON(!eie) in find_parent_nodes
net: mdio: Demote probed message to debug print
mac80211: allow non-standard VHT MCS-10/11
dm btree: add a defensive bounds check to insert_at()
dm space map common: add bounds check to sm_ll_lookup_bitmap()
mlxsw: pci: Avoid flow control for EMAD packets
net: phy: marvell: configure RGMII delays for 88E1118
net: gemini: allow any RGMII interface mode
regulator: qcom_smd: Align probe function with rpmh-regulator
serial: pl010: Drop CR register reset on set_termios
serial: core: Keep mctrl register state and cached copy in sync
random: do not throw away excess input to crng_fast_load
parisc: Avoid calling faulthandler_disabled() twice
x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs
powerpc/6xx: add missing of_node_put
powerpc/powernv: add missing of_node_put
powerpc/cell: add missing of_node_put
powerpc/btext: add missing of_node_put
powerpc/watchdog: Fix missed watchdog reset due to memory ordering race
i2c: i801: Don't silently correct invalid transfer size
powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING
i2c: mpc: Correct I2C reset procedure
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
powerpc/powermac: Add missing lockdep_register_key()
KVM: PPC: Book3S: Suppress warnings when allocating too big memory slots
KVM: PPC: Book3S: Suppress failed alloc warning in H_COPY_TOFROM_GUEST
w1: Misuse of get_user()/put_user() reported by sparse
nvmem: core: set size for sysfs bin file
dm: fix alloc_dax error handling in alloc_dev
scsi: lpfc: Trigger SLI4 firmware dump before doing driver cleanup
ALSA: seq: Set upper limit of processed events
MIPS: Loongson64: Use three arguments for slti
powerpc/40x: Map 32Mbytes of memory at startup
selftests/powerpc/spectre_v2: Return skip code when miss_percent is high
powerpc: handle kdump appropriately with crash_kexec_post_notifiers option
powerpc/fadump: Fix inaccurate CPU state info in vmcore generated with panic
udf: Fix error handling in udf_new_inode()
MIPS: OCTEON: add put_device() after of_find_device_by_node()
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
MIPS: Octeon: Fix build errors using clang
scsi: sr: Don't use GFP_DMA
ASoC: mediatek: mt8173: fix device_node leak
ASoC: mediatek: mt8183: fix device_node leak
phy: mediatek: Fix missing check in mtk_mipi_tx_probe
rpmsg: core: Clean up resources on announce_create failure.
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
crypto: caam - replace this_cpu_ptr with raw_cpu_ptr
ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
tpm: fix NPE on probe for missing device
spi: uniphier: Fix a bug that doesn't point to private data correctly
xen/gntdev: fix unmap notification order
fuse: Pass correct lend value to filemap_write_and_wait_range()
serial: Fix incorrect rs485 polarity on uart open
cputime, cpuacct: Include guest time in user time in cpuacct.stat
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
iwlwifi: mvm: Increase the scan timeout guard to 30 seconds
s390/mm: fix 2KB pgtable release race
device property: Fix fwnode_graph_devcon_match() fwnode leak
drm/etnaviv: limit submit sizes
drm/nouveau/kms/nv04: use vzalloc for nv04_display
drm/bridge: analogix_dp: Make PSR-exit block less
parisc: Fix lpa and lpa_user defines
powerpc/64s/radix: Fix huge vmap false positive
PCI: xgene: Fix IB window setup
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
PCI: pci-bridge-emul: Make expansion ROM Base Address register read-only
PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config space
PCI: pci-bridge-emul: Fix definitions of reserved bits
PCI: pci-bridge-emul: Correctly set PCIe capabilities
PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device
xfrm: fix policy lookup for ipv6 gre packets
btrfs: fix deadlock between quota enable and other quota operations
btrfs: check the root node for uptodate before returning it
btrfs: respect the max size in the header when activating swap file
ext4: make sure to reset inode lockdep class when quota enabling fails
ext4: make sure quota gets properly shutdown on error
ext4: fix a possible ABBA deadlock due to busy PA
ext4: initialize err_blk before calling __ext4_get_inode_loc
ext4: fix fast commit may miss tracking range for FALLOC_FL_ZERO_RANGE
ext4: set csum seed in tmp inode while migrating to extents
ext4: Fix BUG_ON in ext4_bread when write quota data
ext4: use ext4_ext_remove_space() for fast commit replay delete range
ext4: fast commit may miss tracking unwritten range during ftruncate
ext4: destroy ext4_fc_dentry_cachep kmemcache on module removal
ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'
ext4: don't use the orphan list when migrating an inode
drm/radeon: fix error handling in radeon_driver_open_kms
of: base: Improve argument length mismatch error
firmware: Update Kconfig help text for Google firmware
can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message
media: rcar-csi2: Optimize the selection PHTW register
drm/vc4: hdmi: Make sure the device is powered with CEC
media: correct MEDIA_TEST_SUPPORT help text
Documentation: dmaengine: Correctly describe dmatest with channel unset
Documentation: ACPI: Fix data node reference documentation
Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
Documentation: fix firewire.rst ABI file path error
Bluetooth: hci_sync: Fix not setting adv set duration
scsi: core: Show SCMD_LAST in text form
dmaengine: uniphier-xdmac: Fix type of address variables
RDMA/hns: Modify the mapping attribute of doorbell to device
RDMA/rxe: Fix a typo in opcode name
dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK
Revert "net/mlx5: Add retry mechanism to the command entry index allocation"
powerpc/cell: Fix clang -Wimplicit-fallthrough warning
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
block: Fix fsync always failed if once failed
bpftool: Remove inclusion of utilities.mak from Makefiles
xdp: check prog type before updating BPF link
perf evsel: Override attr->sample_period for non-libpfm4 events
ipv4: update fib_info_cnt under spinlock protection
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
f2fs: compress: fix potential deadlock of compress file
f2fs: fix to reserve space for IO align feature
af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress
clk: Emit a stern warning with writable debugfs enabled
clk: si5341: Fix clock HW provider cleanup
net/smc: Fix hung_task when removing SMC-R devices
net: axienet: increase reset timeout
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: reset core on initialization prior to MDIO access
net: axienet: add missing memory barriers
net: axienet: limit minimum TX ring size
net: axienet: Fix TX ring slot available check
net: axienet: fix number of TX ring slots for available check
net: axienet: fix for TX busy handling
net: axienet: increase default TX ring size to 128
HID: vivaldi: fix handling devices not using numbered reports
rtc: pxa: fix null pointer dereference
vdpa/mlx5: Fix wrong configuration of virtio_version_1_0
virtio_ring: mark ring unused on error
taskstats: Cleanup the use of task->exit_code
inet: frags: annotate races around fqdir->dead and fqdir->high_thresh
netns: add schedule point in ops_exit_list()
xfrm: Don't accidentally set RTO_ONLINK in decode_session4()
gre: Don't accidentally set RTO_ONLINK in gre_fill_metadata_dst()
libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()
perf script: Fix hex dump character output
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Fix concurrency over xfers_list
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
perf probe: Fix ppc64 'perf probe add events failed' case
devlink: Remove misleading internal_flags from health reporter dump
arm64: dts: qcom: msm8996: drop not documented adreno properties
net: bonding: fix bond_xmit_broadcast return value error bug
net_sched: restore "mpu xxx" handling
bcmgenet: add WOL IRQ check
net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config()
net: sfp: fix high power modules without diagnostic monitoring
net: mscc: ocelot: fix using match before it is set
dt-bindings: display: meson-dw-hdmi: add missing sound-name-prefix property
dt-bindings: display: meson-vpu: Add missing amlogic,canvas property
dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7
scripts/dtc: dtx_diff: remove broken example from help text
lib82596: Fix IRQ check in sni_82596_probe
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test
mtd: nand: bbt: Fix corner case in bad block table handling
ath10k: Fix the MTU size on QCA9377 SDIO
scripts: sphinx-pre-install: add required ctex dependency
scripts: sphinx-pre-install: Fix ctex support on Debian
Linux 5.10.94
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I857f2417c899508815a1ba13d1285fd400a1f133
This commit is contained in:
Greg Kroah-Hartman
@@ -1,62 +0,0 @@
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset
|
||||
KernelVersion: 4.13
|
||||
Contact: fabrice.gasnier@st.com
|
||||
Description:
|
||||
Reading returns the current preset value. Writing sets the
|
||||
preset value. Encoder counts continuously from 0 to preset
|
||||
value, depending on direction (up/down).
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
|
||||
KernelVersion: 4.13
|
||||
Contact: fabrice.gasnier@st.com
|
||||
Description:
|
||||
Reading returns the list possible quadrature modes.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
|
||||
KernelVersion: 4.13
|
||||
Contact: fabrice.gasnier@st.com
|
||||
Description:
|
||||
Configure the device counter quadrature modes:
|
||||
|
||||
- non-quadrature:
|
||||
Encoder IN1 input servers as the count input (up
|
||||
direction).
|
||||
|
||||
- quadrature:
|
||||
Encoder IN1 and IN2 inputs are mixed to get direction
|
||||
and count.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
|
||||
KernelVersion: 4.13
|
||||
Contact: fabrice.gasnier@st.com
|
||||
Description:
|
||||
Reading returns the list possible active edges.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_count0_polarity
|
||||
KernelVersion: 4.13
|
||||
Contact: fabrice.gasnier@st.com
|
||||
Description:
|
||||
Configure the device encoder/counter active edge:
|
||||
|
||||
- rising-edge
|
||||
- falling-edge
|
||||
- both-edges
|
||||
|
||||
In non-quadrature mode, device counts up on active edge.
|
||||
|
||||
In quadrature mode, encoder counting scenarios are as follows:
|
||||
|
||||
+---------+----------+--------------------+--------------------+
|
||||
| Active | Level on | IN1 signal | IN2 signal |
|
||||
| edge | opposite +----------+---------+----------+---------+
|
||||
| | signal | Rising | Falling | Rising | Falling |
|
||||
+---------+----------+----------+---------+----------+---------+
|
||||
| Rising | High -> | Down | - | Up | - |
|
||||
| edge | Low -> | Up | - | Down | - |
|
||||
+---------+----------+----------+---------+----------+---------+
|
||||
| Falling | High -> | - | Up | - | Down |
|
||||
| edge | Low -> | - | Down | - | Up |
|
||||
+---------+----------+----------+---------+----------+---------+
|
||||
| Both | High -> | Down | Up | Up | Down |
|
||||
| edges | Low -> | Up | Down | Down | Up |
|
||||
+---------+----------+----------+---------+----------+---------+
|
||||
@@ -468,7 +468,7 @@ Spectre variant 2
|
||||
before invoking any firmware code to prevent Spectre variant 2 exploits
|
||||
using the firmware.
|
||||
|
||||
Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
|
||||
Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
|
||||
and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
|
||||
attacks on the kernel generally more difficult.
|
||||
|
||||
|
||||
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
|
||||
maintainers:
|
||||
- Neil Armstrong <narmstrong@baylibre.com>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/sound/name-prefix.yaml#
|
||||
|
||||
description: |
|
||||
The Amlogic Meson Synopsys Designware Integration is composed of
|
||||
- A Synopsys DesignWare HDMI Controller IP
|
||||
@@ -99,6 +102,8 @@ properties:
|
||||
"#sound-dai-cells":
|
||||
const: 0
|
||||
|
||||
sound-name-prefix: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
@@ -78,6 +78,10 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
amlogic,canvas:
|
||||
description: should point to a canvas provider node
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
description: phandle to the associated power domain
|
||||
@@ -106,6 +110,7 @@ required:
|
||||
- port@1
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- amlogic,canvas
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
@@ -118,6 +123,7 @@ examples:
|
||||
interrupts = <3>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
amlogic,canvas = <&canvas>;
|
||||
|
||||
/* CVBS VDAC output port */
|
||||
port@0 {
|
||||
|
||||
@@ -199,12 +199,11 @@ patternProperties:
|
||||
|
||||
contribution:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 100
|
||||
description:
|
||||
The percentage contribution of the cooling devices at the
|
||||
specific trip temperature referenced in this map
|
||||
to this thermal zone
|
||||
The cooling contribution to the thermal zone of the referred
|
||||
cooling device at the referred trip point. The contribution is
|
||||
a ratio of the sum of all cooling contributions within a
|
||||
thermal zone.
|
||||
|
||||
required:
|
||||
- trip
|
||||
|
||||
@@ -39,8 +39,8 @@ properties:
|
||||
samsung,syscon-phandle:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description:
|
||||
Phandle to the PMU system controller node (in case of Exynos5250
|
||||
and Exynos5420).
|
||||
Phandle to the PMU system controller node (in case of Exynos5250,
|
||||
Exynos5420 and Exynos7).
|
||||
|
||||
required:
|
||||
- compatible
|
||||
@@ -58,6 +58,7 @@ allOf:
|
||||
enum:
|
||||
- samsung,exynos5250-wdt
|
||||
- samsung,exynos5420-wdt
|
||||
- samsung,exynos7-wdt
|
||||
then:
|
||||
required:
|
||||
- samsung,syscon-phandle
|
||||
|
||||
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
|
||||
Allocating Channels
|
||||
-------------------
|
||||
|
||||
Channels are required to be configured prior to starting the test run.
|
||||
Attempting to run the test without configuring the channels will fail.
|
||||
Channels do not need to be configured prior to starting a test run. Attempting
|
||||
to run the test without configuring the channels will result in testing any
|
||||
channels that are available.
|
||||
|
||||
Example::
|
||||
|
||||
% echo 1 > /sys/module/dmatest/parameters/run
|
||||
dmatest: Could not start test, no channels configured
|
||||
dmatest: No channels configured, continue with any
|
||||
|
||||
Channels are registered using the "channel" parameter. Channels can be requested by their
|
||||
name, once requested, the channel is registered and a pending thread is added to the test list.
|
||||
|
||||
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
|
||||
Firewire char device data structures
|
||||
====================================
|
||||
|
||||
.. include:: /ABI/stable/firewire-cdev
|
||||
.. include:: ../ABI/stable/firewire-cdev
|
||||
:literal:
|
||||
|
||||
.. kernel-doc:: include/uapi/linux/firewire-cdev.h
|
||||
@@ -28,7 +28,7 @@ Firewire char device data structures
|
||||
Firewire device probing and sysfs interfaces
|
||||
============================================
|
||||
|
||||
.. include:: /ABI/stable/sysfs-bus-firewire
|
||||
.. include:: ../ABI/stable/sysfs-bus-firewire
|
||||
:literal:
|
||||
|
||||
.. kernel-doc:: drivers/firewire/core-device.c
|
||||
|
||||
@@ -5,7 +5,7 @@
|
||||
Referencing hierarchical data nodes
|
||||
===================================
|
||||
|
||||
:Copyright: |copy| 2018 Intel Corporation
|
||||
:Copyright: |copy| 2018, 2021 Intel Corporation
|
||||
:Author: Sakari Ailus <sakari.ailus@linux.intel.com>
|
||||
|
||||
ACPI in general allows referring to device objects in the tree only.
|
||||
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
|
||||
Name (NOD0, Package() {
|
||||
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
||||
Package () {
|
||||
Package () { "reg", 0 },
|
||||
Package () { "random-property", 3 },
|
||||
}
|
||||
})
|
||||
Name (NOD1, Package() {
|
||||
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
|
||||
Package () {
|
||||
Package () { "reg", 1 },
|
||||
Package () { "anothernode", "ANOD" },
|
||||
}
|
||||
})
|
||||
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
|
||||
Name (_DSD, Package () {
|
||||
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
||||
Package () {
|
||||
Package () { "reference", ^DEV0, "node@1", "anothernode" },
|
||||
Package () {
|
||||
"reference", Package () {
|
||||
^DEV0, "node@1", "anothernode"
|
||||
}
|
||||
},
|
||||
}
|
||||
})
|
||||
}
|
||||
|
||||
2
Makefile
2
Makefile
@@ -1,7 +1,7 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
VERSION = 5
|
||||
PATCHLEVEL = 10
|
||||
SUBLEVEL = 93
|
||||
SUBLEVEL = 94
|
||||
EXTRAVERSION =
|
||||
NAME = Dare mighty things
|
||||
|
||||
|
||||
@@ -400,12 +400,12 @@ choice
|
||||
Say Y here if you want kernel low-level debugging support
|
||||
on i.MX25.
|
||||
|
||||
config DEBUG_IMX21_IMX27_UART
|
||||
bool "i.MX21 and i.MX27 Debug UART"
|
||||
depends on SOC_IMX21 || SOC_IMX27
|
||||
config DEBUG_IMX27_UART
|
||||
bool "i.MX27 Debug UART"
|
||||
depends on SOC_IMX27
|
||||
help
|
||||
Say Y here if you want kernel low-level debugging support
|
||||
on i.MX21 or i.MX27.
|
||||
on i.MX27.
|
||||
|
||||
config DEBUG_IMX28_UART
|
||||
bool "i.MX28 Debug UART"
|
||||
@@ -1523,7 +1523,7 @@ config DEBUG_IMX_UART_PORT
|
||||
int "i.MX Debug UART Port Selection"
|
||||
depends on DEBUG_IMX1_UART || \
|
||||
DEBUG_IMX25_UART || \
|
||||
DEBUG_IMX21_IMX27_UART || \
|
||||
DEBUG_IMX27_UART || \
|
||||
DEBUG_IMX31_UART || \
|
||||
DEBUG_IMX35_UART || \
|
||||
DEBUG_IMX50_UART || \
|
||||
@@ -1591,12 +1591,12 @@ config DEBUG_LL_INCLUDE
|
||||
default "debug/icedcc.S" if DEBUG_ICEDCC
|
||||
default "debug/imx.S" if DEBUG_IMX1_UART || \
|
||||
DEBUG_IMX25_UART || \
|
||||
DEBUG_IMX21_IMX27_UART || \
|
||||
DEBUG_IMX27_UART || \
|
||||
DEBUG_IMX31_UART || \
|
||||
DEBUG_IMX35_UART || \
|
||||
DEBUG_IMX50_UART || \
|
||||
DEBUG_IMX51_UART || \
|
||||
DEBUG_IMX53_UART ||\
|
||||
DEBUG_IMX53_UART || \
|
||||
DEBUG_IMX6Q_UART || \
|
||||
DEBUG_IMX6SL_UART || \
|
||||
DEBUG_IMX6SX_UART || \
|
||||
|
||||
@@ -9,16 +9,22 @@
|
||||
#include <linux/sizes.h>
|
||||
|
||||
.macro __nop
|
||||
#ifdef CONFIG_EFI_STUB
|
||||
@ This is almost but not quite a NOP, since it does clobber the
|
||||
@ condition flags. But it is the best we can do for EFI, since
|
||||
@ PE/COFF expects the magic string "MZ" at offset 0, while the
|
||||
@ ARM/Linux boot protocol expects an executable instruction
|
||||
@ there.
|
||||
.inst MZ_MAGIC | (0x1310 << 16) @ tstne r0, #0x4d000
|
||||
#else
|
||||
AR_CLASS( mov r0, r0 )
|
||||
M_CLASS( nop.w )
|
||||
.endm
|
||||
|
||||
.macro __initial_nops
|
||||
#ifdef CONFIG_EFI_STUB
|
||||
@ This is a two-instruction NOP, which happens to bear the
|
||||
@ PE/COFF signature "MZ" in the first two bytes, so the kernel
|
||||
@ is accepted as an EFI binary. Booting via the UEFI stub
|
||||
@ will not execute those instructions, but the ARM/Linux
|
||||
@ boot protocol does, so we need some NOPs here.
|
||||
.inst MZ_MAGIC | (0xe225 << 16) @ eor r5, r5, 0x4d000
|
||||
eor r5, r5, 0x4d000 @ undo previous insn
|
||||
#else
|
||||
__nop
|
||||
__nop
|
||||
#endif
|
||||
.endm
|
||||
|
||||
|
||||
@@ -197,7 +197,8 @@ start:
|
||||
* were patching the initial instructions of the kernel, i.e
|
||||
* had started to exploit this "patch area".
|
||||
*/
|
||||
.rept 7
|
||||
__initial_nops
|
||||
.rept 5
|
||||
__nop
|
||||
.endr
|
||||
#ifndef CONFIG_THUMB2_KERNEL
|
||||
|
||||
@@ -168,7 +168,7 @@
|
||||
};
|
||||
|
||||
uart0: serial@12000 {
|
||||
compatible = "marvell,armada-38x-uart";
|
||||
compatible = "marvell,armada-38x-uart", "ns16550a";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -178,7 +178,7 @@
|
||||
};
|
||||
|
||||
uart1: serial@12100 {
|
||||
compatible = "marvell,armada-38x-uart";
|
||||
compatible = "marvell,armada-38x-uart", "ns16550a";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@@ -84,7 +84,7 @@
|
||||
partitions {
|
||||
compatible = "redboot-fis";
|
||||
/* Eraseblock at 0xfe0000 */
|
||||
fis-index-block = <0x1fc>;
|
||||
fis-index-block = <0x7f>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -8,6 +8,7 @@
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/*
|
||||
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
|
||||
@@ -630,63 +631,92 @@
|
||||
};
|
||||
|
||||
lp5523: lp5523@32 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "national,lp5523";
|
||||
reg = <0x32>;
|
||||
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
|
||||
enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
|
||||
enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
|
||||
|
||||
chan0 {
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
chan-name = "lp5523:kb1";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
};
|
||||
|
||||
chan1 {
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
chan-name = "lp5523:kb2";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
};
|
||||
|
||||
chan2 {
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
chan-name = "lp5523:kb3";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
};
|
||||
|
||||
chan3 {
|
||||
led@3 {
|
||||
reg = <3>;
|
||||
chan-name = "lp5523:kb4";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
};
|
||||
|
||||
chan4 {
|
||||
led@4 {
|
||||
reg = <4>;
|
||||
chan-name = "lp5523:b";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
chan5 {
|
||||
led@5 {
|
||||
reg = <5>;
|
||||
chan-name = "lp5523:g";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
chan6 {
|
||||
led@6 {
|
||||
reg = <6>;
|
||||
chan-name = "lp5523:r";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
chan7 {
|
||||
led@7 {
|
||||
reg = <7>;
|
||||
chan-name = "lp5523:kb5";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
};
|
||||
|
||||
chan8 {
|
||||
led@8 {
|
||||
reg = <8>;
|
||||
chan-name = "lp5523:kb6";
|
||||
led-cur = /bits/ 8 <50>;
|
||||
max-cur = /bits/ 8 <100>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -192,7 +192,7 @@
|
||||
|
||||
display: display@1{
|
||||
/* Connect panel-ilitek-9341 to ltdc */
|
||||
compatible = "st,sf-tc240t-9370-t";
|
||||
compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
|
||||
reg = <1>;
|
||||
spi-3wire;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
@@ -11,13 +11,6 @@
|
||||
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
|
||||
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
|
||||
|
||||
#define IMX21_UART1_BASE_ADDR 0x1000a000
|
||||
#define IMX21_UART2_BASE_ADDR 0x1000b000
|
||||
#define IMX21_UART3_BASE_ADDR 0x1000c000
|
||||
#define IMX21_UART4_BASE_ADDR 0x1000d000
|
||||
#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
|
||||
#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
|
||||
|
||||
#define IMX25_UART1_BASE_ADDR 0x43f90000
|
||||
#define IMX25_UART2_BASE_ADDR 0x43f94000
|
||||
#define IMX25_UART3_BASE_ADDR 0x5000c000
|
||||
@@ -26,6 +19,13 @@
|
||||
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
|
||||
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
|
||||
|
||||
#define IMX27_UART1_BASE_ADDR 0x1000a000
|
||||
#define IMX27_UART2_BASE_ADDR 0x1000b000
|
||||
#define IMX27_UART3_BASE_ADDR 0x1000c000
|
||||
#define IMX27_UART4_BASE_ADDR 0x1000d000
|
||||
#define IMX27_UART_BASE_ADDR(n) IMX27_UART##n##_BASE_ADDR
|
||||
#define IMX27_UART_BASE(n) IMX27_UART_BASE_ADDR(n)
|
||||
|
||||
#define IMX31_UART1_BASE_ADDR 0x43f90000
|
||||
#define IMX31_UART2_BASE_ADDR 0x43f94000
|
||||
#define IMX31_UART3_BASE_ADDR 0x5000c000
|
||||
@@ -112,10 +112,10 @@
|
||||
|
||||
#ifdef CONFIG_DEBUG_IMX1_UART
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
|
||||
#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
|
||||
#elif defined(CONFIG_DEBUG_IMX25_UART)
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
|
||||
#elif defined(CONFIG_DEBUG_IMX27_UART)
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX27)
|
||||
#elif defined(CONFIG_DEBUG_IMX31_UART)
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
|
||||
#elif defined(CONFIG_DEBUG_IMX35_UART)
|
||||
|
||||
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
|
||||
return -ENODEV;
|
||||
|
||||
for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
|
||||
if (!of_device_is_available(np))
|
||||
if (!of_device_is_available(np)) {
|
||||
of_node_put(np);
|
||||
break;
|
||||
}
|
||||
|
||||
ret = of_property_read_u32(np, "reg", &addr);
|
||||
if (ret) /* Skip invalid entry and continue */
|
||||
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
|
||||
quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
|
||||
if (!quirk) {
|
||||
ret = -ENOMEM;
|
||||
of_node_put(np);
|
||||
goto err_mem;
|
||||
}
|
||||
|
||||
|
||||
@@ -52,7 +52,7 @@
|
||||
secure-monitor = <&sm>;
|
||||
};
|
||||
|
||||
gpu_opp_table: gpu-opp-table {
|
||||
gpu_opp_table: opp-table-gpu {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-124999998 {
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user