Merge 5.10.73 into android12-5.10-lts

Changes in 5.10.73
	Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
	usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
	USB: cdc-acm: fix racy tty buffer accesses
	USB: cdc-acm: fix break reporting
	usb: typec: tcpm: handle SRC_STARTUP state if cc changes
	drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
	xen/privcmd: fix error handling in mmap-resource processing
	mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
	mmc: sdhci-of-at91: wait for calibration done before proceed
	mmc: sdhci-of-at91: replace while loop with read_poll_timeout
	ovl: fix missing negative dentry check in ovl_rename()
	ovl: fix IOCB_DIRECT if underlying fs doesn't support direct IO
	nfsd: fix error handling of register_pernet_subsys() in init_nfsd()
	nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
	SUNRPC: fix sign error causing rpcsec_gss drops
	xen/balloon: fix cancelled balloon action
	ARM: dts: omap3430-sdp: Fix NAND device node
	ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
	ARM: dts: qcom: apq8064: use compatible which contains chipid
	riscv: Flush current cpu icache before other cpus
	bus: ti-sysc: Add break in switch statement in sysc_init_soc()
	soc: qcom: socinfo: Fixed argument passed to platform_set_data()
	ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
	ARM: at91: pm: do not panic if ram controllers are not enabled
	soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
	ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo
	ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo
	ARM: dts: imx6qdl-pico: Fix Ethernet support
	PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
	ath5k: fix building with LEDS=m
	arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
	xtensa: use CONFIG_USE_OF instead of CONFIG_OF
	xtensa: call irqchip_init only when CONFIG_USE_OF is selected
	iwlwifi: pcie: add configuration of a Wi-Fi adapter on Dell XPS 15
	bpf, arm: Fix register clobbering in div/mod implementation
	soc: ti: omap-prm: Fix external abort for am335x pruss
	bpf: Fix integer overflow in prealloc_elems_and_freelist()
	net/mlx5e: IPSEC RX, enable checksum complete
	net/mlx5: E-Switch, Fix double allocation of acl flow counter
	phy: mdio: fix memory leak
	net_sched: fix NULL deref in fifo_set_limit()
	powerpc/fsl/dts: Fix phy-connection-type for fm1mac3
	ptp_pch: Load module automatically if ID matches
	arm64: dts: ls1028a: add missing CAN nodes
	dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value
	ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
	net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()
	net: bridge: fix under estimation in br_get_linkxstats_size()
	net/sched: sch_taprio: properly cancel timer from taprio_destroy()
	net: sfp: Fix typo in state machine debug string
	netlink: annotate data races around nlk->bound
	perf jevents: Tidy error handling
	bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
	drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
	video: fbdev: gbefb: Only instantiate device when built for IP32
	drm/nouveau: avoid a use-after-free when BO init fails
	drm/nouveau/kms/nv50-: fix file release memory leak
	drm/nouveau/debugfs: fix file release memory leak
	gve: Correct available tx qpl check
	gve: Avoid freeing NULL pointer
	rtnetlink: fix if_nlmsg_stats_size() under estimation
	gve: fix gve_get_stats()
	gve: report 64bit tx_bytes counter from gve_handle_report_stats()
	i40e: fix endless loop under rtnl
	i40e: Fix freeing of uninitialized misc IRQ vector
	net: prefer socket bound to interface when not in VRF
	powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
	i2c: acpi: fix resource leak in reconfiguration device addition
	i2c: mediatek: Add OFFSET_EXT_CONF setting back
	riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
	bpf, s390: Fix potential memory leak about jit_data
	RISC-V: Include clone3() on rv32
	powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
	powerpc/64s: fix program check interrupt emergency stack path
	pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
	x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
	x86/Kconfig: Correct reference to MWINCHIP3D
	x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]
	x86/entry: Correct reference to intended CONFIG_64_BIT
	x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
	x86/hpet: Use another crystalball to evaluate HPET usability
	Linux 5.10.73

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib837d28b5ab0510121c16791823806a287c81926

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml

@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 72
+SUBLEVEL = 73
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -56,6 +56,7 @@
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -76,8 +77,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 

arch/arm/boot/dts/imx6dl-yapp4-common.dtsi

@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -275,6 +276,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
 		chan@1 {
@@ -282,6 +284,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		chan@2 {
@@ -289,6 +292,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 
 		chan@3 {
@@ -296,6 +300,7 @@
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
 			reg = <3>;
+			color = <LED_COLOR_ID_WHITE>;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-pico.dtsi

@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {

arch/arm/boot/dts/omap3430-sdp.dts

@@ -101,7 +101,7 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -198,7 +198,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -1148,7 +1148,7 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -1163,7 +1163,6 @@
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1306,7 +1305,7 @@
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
 			clock-names = "iface_clk", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
 		};
 
 

arch/arm/mach-at91/pm.c

@@ -517,18 +517,22 @@ static const struct of_device_id ramc_ids[] __initconst = {
 	{ /*sentinel*/ }
 };
 
-static __init void at91_dt_ramc(void)
+static __init int at91_dt_ramc(void)
 {
 	struct device_node *np;
 	const struct of_device_id *of_id;
 	int idx = 0;
 	void *standby = NULL;
 	const struct ramc_info *ramc;
+	int ret;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
 		soc_pm.data.ramc[idx] = of_iomap(np, 0);
-		if (!soc_pm.data.ramc[idx])
-			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+		if (!soc_pm.data.ramc[idx]) {
+			pr_err("unable to map ramc[%d] cpu registers\n", idx);
+			ret = -ENOMEM;
+			goto unmap_ramc;
+		}
 
 		ramc = of_id->data;
 		if (!standby)
@@ -538,15 +542,26 @@ static __init void at91_dt_ramc(void)
 		idx++;
 	}
 
-	if (!idx)
-		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+	if (!idx) {
+		pr_err("unable to find compatible ram controller node in dtb\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
 
 	if (!standby) {
 		pr_warn("ramc no standby function available\n");
-		return;
+		return 0;
 	}
 
 	at91_cpuidle_device.dev.platform_data = standby;
+
+	return 0;
+
+unmap_ramc:
+	while (idx)
+		iounmap(soc_pm.data.ramc[--idx]);
+
+	return ret;
 }
 
 static void at91rm9200_idle(void)
@@ -869,6 +884,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 void __init at91rm9200_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
 		return;
 
@@ -880,7 +897,9 @@ void __init at91rm9200_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
 
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
@@ -895,13 +914,17 @@ void __init sam9x60_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init();
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sam9x60_ws_ids;
@@ -910,6 +933,8 @@ void __init sam9x60_pm_init(void)
 
 void __init at91sam9_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
 		return;
 
@@ -921,7 +946,10 @@ void __init at91sam9_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(at91sam9_idle);
 }
 
@@ -930,12 +958,16 @@ void __init sama5_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 }
 
@@ -945,13 +977,17 @@ void __init sama5d2_pm_init(void)
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
 		AT91_PM_BACKUP,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init();
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sama5d2_ws_ids;

arch/arm/mach-imx/pm-imx6.c

@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
@@ -618,6 +619,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 
 static void imx6_pm_stby_poweroff(void)
 {
+	gic_cpu_if_down(0);
 	imx6_set_lpm(STOP_POWER_OFF);
 	imx6q_suspend_finish(0);
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -3618,6 +3618,8 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
 	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
 		oh->flags |= HWMOD_SWSUP_MSTANDBY;
+	if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+		oh->flags |= HWMOD_CLKDM_NOAUTO;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,

arch/arm/net/bpf_jit_32.c

@@ -36,6 +36,10 @@
  *                        +-----+
  *                        |RSVD | JIT scratchpad
  * current ARM_SP =>      +-----+ <= (BPF_FP - STACK_SIZE + SCRATCH_SIZE)
+ *                        | ... | caller-saved registers
+ *                        +-----+
+ *                        | ... | arguments passed on stack
+ * ARM_SP during call =>  +-----|
  *                        |     |
  *                        | ... | Function call stack
  *                        |     |
@@ -63,6 +67,12 @@
  *
  * When popping registers off the stack at the end of a BPF function, we
  * reference them via the current ARM_FP register.
+ *
+ * Some eBPF operations are implemented via a call to a helper function.
+ * Such calls are "invisible" in the eBPF code, so it is up to the calling
+ * program to preserve any caller-saved ARM registers during the call. The
+ * JIT emits code to push and pop those registers onto the stack, immediately
+ * above the callee stack frame.
  */
 #define CALLEE_MASK	(1 << ARM_R4 | 1 << ARM_R5 | 1 << ARM_R6 | \
 			 1 << ARM_R7 | 1 << ARM_R8 | 1 << ARM_R9 | \
@@ -70,6 +80,8 @@
 #define CALLEE_PUSH_MASK (CALLEE_MASK | 1 << ARM_LR)
 #define CALLEE_POP_MASK  (CALLEE_MASK | 1 << ARM_PC)
 
+#define CALLER_MASK	(1 << ARM_R0 | 1 << ARM_R1 | 1 << ARM_R2 | 1 << ARM_R3)
+
 enum {
 	/* Stack layout - these are offsets from (top of stack - 4) */
 	BPF_R2_HI,
@@ -464,6 +476,7 @@ static inline int epilogue_offset(const struct jit_ctx *ctx)
 
 static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 {
+	const int exclude_mask = BIT(ARM_R0) | BIT(ARM_R1);
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 
 #if __LINUX_ARM_ARCH__ == 7
@@ -495,11 +508,17 @@ static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 		emit(ARM_MOV_R(ARM_R0, rm), ctx);
 	}
 
+	/* Push caller-saved registers on stack */
+	emit(ARM_PUSH(CALLER_MASK & ~exclude_mask), ctx);
+
 	/* Call appropriate function */
 	emit_mov_i(ARM_IP, op == BPF_DIV ?
 		   (u32)jit_udiv32 : (u32)jit_mod32, ctx);
 	emit_blx_r(ARM_IP, ctx);
 
+	/* Restore caller-saved registers from stack */
+	emit(ARM_POP(CALLER_MASK & ~exclude_mask), ctx);
+
 	/* Save return value */
 	if (rd != ARM_R0)
 		emit(ARM_MOV_R(rd, ARM_R0), ctx);

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -386,6 +386,24 @@
 			status = "disabled";
 		};
 
+		can0: can@2180000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;

arch/arm64/boot/dts/qcom/pm8150.dtsi

@@ -48,7 +48,7 @@
 		#size-cells = <0>;
 
 		pon: power-on@800 {
-			compatible = "qcom,pm8916-pon";
+			compatible = "qcom,pm8998-pon";
 			reg = <0x0800>;
 			pwrkey {
 				compatible = "qcom,pm8941-pwrkey";

arch/powerpc/boot/dts/fsl/t1023rdb.dts

@@ -154,7 +154,7 @@
 
 			fm1mac3: ethernet@e4000 {
 				phy-handle = <&sgmii_aqr_phy3>;
-				phy-connection-type = "sgmii-2500";
+				phy-connection-type = "2500base-x";
 				sleep = <&rcpm 0x20000000>;
 			};
 

arch/powerpc/kernel/dma-iommu.c

@@ -117,6 +117,15 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 	u64 mask;
 
+	if (dev_is_pci(dev)) {
+		u64 bypass_mask = dma_direct_get_required_mask(dev);
+
+		if (dma_iommu_dma_supported(dev, bypass_mask)) {
+			dev_info(dev, "%s: returning bypass mask 0x%llx\n", __func__, bypass_mask);
+			return bypass_mask;
+		}
+	}
+
 	if (!tbl)
 		return 0;
 

arch/powerpc/kernel/exceptions-64s.S

@@ -1715,27 +1715,30 @@ EXC_COMMON_BEGIN(program_check_common)
 	 */
 
 	andi.	r10,r12,MSR_PR
-	bne	2f			/* If userspace, go normal path */
+	bne	.Lnormal_stack		/* If userspace, go normal path */
 
 	andis.	r10,r12,(SRR1_PROGTM)@h
-	bne	1f			/* If TM, emergency		*/
+	bne	.Lemergency_stack	/* If TM, emergency		*/
 
 	cmpdi	r1,-INT_FRAME_SIZE	/* check if r1 is in userspace	*/
-	blt	2f			/* normal path if not		*/
+	blt	.Lnormal_stack		/* normal path if not		*/
 
 	/* Use the emergency stack					*/
-1:	andi.	r10,r12,MSR_PR		/* Set CR0 correctly for label	*/
+.Lemergency_stack:
+	andi.	r10,r12,MSR_PR		/* Set CR0 correctly for label	*/
 					/* 3 in EXCEPTION_PROLOG_COMMON	*/
 	mr	r10,r1			/* Save r1			*/
 	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack		*/
 	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
 	__ISTACK(program_check)=0
 	__GEN_COMMON_BODY program_check
-	b 3f
-2:
+	b .Ldo_program_check
+
+.Lnormal_stack:
 	__ISTACK(program_check)=1
 	__GEN_COMMON_BODY program_check
-3:
+
+.Ldo_program_check:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	program_check_exception
 	REST_NVGPRS(r1) /* instruction emulation may change GPRs */

arch/powerpc/net/bpf_jit_comp64.c

@@ -347,18 +347,25 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			EMIT(PPC_RAW_SUB(dst_reg, dst_reg, src_reg));
 			goto bpf_alu32_trunc;
 		case BPF_ALU | BPF_ADD | BPF_K: /* (u32) dst += (u32) imm */
-		case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */
 		case BPF_ALU64 | BPF_ADD | BPF_K: /* dst += imm */
+			if (!imm) {
+				goto bpf_alu32_trunc;
+			} else if (imm >= -32768 && imm < 32768) {
+				EMIT(PPC_RAW_ADDI(dst_reg, dst_reg, IMM_L(imm)));
+			} else {
+				PPC_LI32(b2p[TMP_REG_1], imm);
+				EMIT(PPC_RAW_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]));
+			}
+			goto bpf_alu32_trunc;
+		case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */
 		case BPF_ALU64 | BPF_SUB | BPF_K: /* dst -= imm */
-			if (BPF_OP(code) == BPF_SUB)
-				imm = -imm;
-			if (imm) {
-				if (imm >= -32768 && imm < 32768)
-					EMIT(PPC_RAW_ADDI(dst_reg, dst_reg, IMM_L(imm)));
-				else {
-					PPC_LI32(b2p[TMP_REG_1], imm);
-					EMIT(PPC_RAW_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]));
-				}
+			if (!imm) {
+				goto bpf_alu32_trunc;
+			} else if (imm > -32768 && imm <= 32768) {
+				EMIT(PPC_RAW_ADDI(dst_reg, dst_reg, IMM_L(-imm)));
+			} else {
+				PPC_LI32(b2p[TMP_REG_1], imm);
+				EMIT(PPC_RAW_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]));
 			}
 			goto bpf_alu32_trunc;
 		case BPF_ALU | BPF_MUL | BPF_X: /* (u32) dst *= (u32) src */

arch/powerpc/platforms/pseries/eeh_pseries.c

@@ -868,6 +868,10 @@ static int __init eeh_pseries_init(void)
 	if (is_kdump_kernel() || reset_devices) {
 		pr_info("Issue PHB reset ...\n");
 		list_for_each_entry(phb, &hose_list, list_node) {
+			// Skip if the slot is empty
+			if (list_empty(&PCI_DN(phb->dn)->child_list))
+				continue;
+
 			pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list);
 			config_addr = pseries_eeh_get_pe_config_addr(pdn);
 

arch/riscv/include/uapi/asm/unistd.h

@@ -18,9 +18,10 @@
 #ifdef __LP64__
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_SYS_CLONE3
 #endif /* __LP64__ */
 
+#define __ARCH_WANT_SYS_CLONE3
+
 #include <asm-generic/unistd.h>
 
 /*

arch/riscv/kernel/vdso.c

@@ -65,7 +65,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 
 	vdso_len = (vdso_pages + 1) << PAGE_SHIFT;
 
-	mmap_write_lock(mm);
+	if (mmap_write_lock_killable(mm))
+		return -EINTR;
+
 	vdso_base = get_unmapped_area(NULL, 0, vdso_len, 0, 0);
 	if (IS_ERR_VALUE(vdso_base)) {
 		ret = vdso_base;