Merge 5.10.143 into android12-5.10-lts

Changes in 5.10.143
	NFSD: Fix verifier returned in stable WRITEs
	xen-blkfront: Cache feature_persistent value before advertisement
	tty: n_gsm: initialize more members at gsm_alloc_mux()
	tty: n_gsm: avoid call of sleeping functions from atomic context
	efi: libstub: Disable struct randomization
	efi: capsule-loader: Fix use-after-free in efi_capsule_write
	wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_cmd()
	fs: only do a memory barrier for the first set_buffer_uptodate()
	Revert "mm: kmemleak: take a full lowmem check in kmemleak_*_phys()"
	scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX
	scsi: megaraid_sas: Fix double kfree()
	drm/gem: Fix GEM handle release errors
	drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini
	drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.
	drm/radeon: add a force flush to delay work when radeon
	parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()
	parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines
	arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level
	net/core/skbuff: Check the return value of skb_copy_bits()
	fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()
	drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly
	ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()
	ALSA: aloop: Fix random zeros in capture data when using jiffies timer
	ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()
	kprobes: Prohibit probes in gate area
	debugfs: add debugfs_lookup_and_remove()
	nvmet: fix a use-after-free
	drm/i915: Implement WaEdpLinkRateDataReload
	scsi: mpt3sas: Fix use-after-free warning
	scsi: lpfc: Add missing destroy_workqueue() in error path
	cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
	cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock
	cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
	smb3: missing inode locks in punch hole
	ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node
	regulator: core: Clean up on enable failure
	tee: fix compiler warning in tee_shm_register()
	RDMA/cma: Fix arguments order in net device validation
	soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
	RDMA/hns: Fix supported page size
	RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
	ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
	ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
	ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
	ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
	netfilter: br_netfilter: Drop dst references before setting.
	netfilter: nf_tables: clean up hook list when offload flags check fails
	netfilter: nf_conntrack_irc: Fix forged IP logic
	ALSA: usb-audio: Inform the delayed registration more properly
	ALSA: usb-audio: Register card again for iface over delayed_register option
	rxrpc: Fix an insufficiently large sglist in rxkad_verify_packet_2()
	afs: Use the operation issue time instead of the reply time for callbacks
	sch_sfb: Don't assume the skb is still around after enqueueing to child
	tipc: fix shift wrapping bug in map_get()
	ice: use bitmap_free instead of devm_kfree
	i40e: Fix kernel crash during module removal
	xen-netback: only remove 'hotplug-status' when the vif is actually destroyed
	RDMA/siw: Pass a pointer to virt_to_page()
	ipv6: sr: fix out-of-bounds read when setting HMAC data.
	IB/core: Fix a nested dead lock as part of ODP flow
	RDMA/mlx5: Set local port to one when accessing counters
	nvme-tcp: fix UAF when detecting digest errors
	nvme-tcp: fix regression that causes sporadic requests to time out
	tcp: fix early ETIMEDOUT after spurious non-SACK RTO
	sch_sfb: Also store skb len before calling child enqueue
	ASoC: mchp-spdiftx: remove references to mchp_i2s_caps
	ASoC: mchp-spdiftx: Fix clang -Wbitfield-constant-conversion
	MIPS: loongson32: ls1c: Fix hang during startup
	swiotlb: avoid potential left shift overflow
	iommu/amd: use full 64-bit value in build_completion_wait()
	hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
	hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
	hwmon: (mr75203) fix voltage equation for negative source input
	hwmon: (mr75203) fix multi-channel voltage reading
	hwmon: (mr75203) enable polling for all VM channels
	arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly
	Linux 5.10.143

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia1bc1b76bcad0e2cb3b27d1a37278b1d24c6b90d

Documentation/arm64/silicon-errata.rst

@@ -94,6 +94,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2051678        | ARM64_ERRATUM_2051678       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 142
+SUBLEVEL = 143
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi

@@ -62,8 +62,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -81,8 +81,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -104,8 +104,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -146,8 +146,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -161,9 +161,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;

arch/arm/boot/dts/at91-sama5d2_icp.dts

@@ -195,8 +195,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -214,8 +214,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -233,8 +233,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -256,7 +256,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -271,8 +270,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -286,8 +285,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {

arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi

@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";

arch/arm64/Kconfig

@@ -712,6 +712,24 @@ config ARM64_ERRATUM_2067961
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2457168
+	bool "Cortex-A510: 2457168: workaround for AMEVCNTR01 incrementing incorrectly"
+	depends on ARM64_AMU_EXTN
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2457168.
+
+	  The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate
+	  as the system counter. On affected Cortex-A510 cores AMEVCNTR01 increments
+	  incorrectly giving a significantly higher output value.
+
+	  Work around this problem by keeping the reference values of affected counters
+	  to 0 thus signaling an error case. This effect is the same to firmware disabling
+	  affected counters, in which case 0 will be returned when reading the disabled
+	  counters.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y

arch/arm64/include/asm/cpucaps.h

@@ -71,8 +71,9 @@
 #define ARM64_KVM_PROTECTED_MODE		60
 #define ARM64_WORKAROUND_TSB_FLUSH_FAILURE	61
 #define ARM64_SPECTRE_BHB			62
+#define ARM64_WORKAROUND_2457168		63
 
-/* kabi: reserve 63 - 76 for future cpu capabilities */
+/* kabi: reserve 64 - 76 for future cpu capabilities */
 #define ARM64_NCAPS				76
 
 #endif /* __ASM_CPUCAPS_H */

arch/arm64/kernel/cacheinfo.c

@@ -45,7 +45,8 @@ static void ci_leaf_init(struct cacheinfo *this_leaf,
 
 int init_cache_level(unsigned int cpu)
 {
-	unsigned int ctype, level, leaves, fw_level;
+	unsigned int ctype, level, leaves;
+	int fw_level;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 
 	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
@@ -63,6 +64,9 @@ int init_cache_level(unsigned int cpu)
 	else
 		fw_level = acpi_find_last_cache_level(cpu);
 
+	if (fw_level < 0)
+		return fw_level;
+
 	if (level < fw_level) {
 		/*
 		 * some external caches not specified in CLIDR_EL1

arch/arm64/kernel/cpu_errata.c

@@ -557,6 +557,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_WORKAROUND_TSB_FLUSH_FAILURE,
 		ERRATA_MIDR_RANGE_LIST(tsb_flush_fail_cpus),
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2457168
+	{
+		.desc = "ARM erratum 2457168",
+		.capability = ARM64_WORKAROUND_2457168,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		/* Cortex-A510 r0p0-r1p1 */
+		CAP_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1)
+	},
 #endif
 	{
 	}

arch/arm64/kernel/cpufeature.c

@@ -1706,7 +1706,10 @@ static void cpu_amu_enable(struct arm64_cpu_capabilities const *cap)
 		pr_info("detected CPU%d: Activity Monitors Unit (AMU)\n",
 			smp_processor_id());
 		cpumask_set_cpu(smp_processor_id(), &amu_cpus);
-		init_cpu_freq_invariance_counters();
+
+		/* 0 reference values signal broken/disabled counters */
+		if (!this_cpu_has_cap(ARM64_WORKAROUND_2457168))
+			init_cpu_freq_invariance_counters();
 	}
 }
 

arch/mips/loongson32/ls1c/board.c

@@ -15,7 +15,6 @@ static struct platform_device *ls1c_platform_devices[] __initdata = {
 static int __init ls1c_platform_init(void)
 {
 	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-	ls1x_rtc_set_extclk(&ls1x_rtc_pdev);
 
 	return platform_add_devices(ls1c_platform_devices,
 				   ARRAY_SIZE(ls1c_platform_devices));

arch/parisc/kernel/head.S

@@ -22,7 +22,7 @@
 #include <linux/init.h>
 #include <linux/pgtable.h>
 
-	.level	PA_ASM_LEVEL
+	.level	1.1
 
 	__INITDATA
 ENTRY(boot_args)
@@ -69,6 +69,47 @@ $bss_loop:
 	stw,ma          %arg2,4(%r1)
 	stw,ma          %arg3,4(%r1)
 
+#if !defined(CONFIG_64BIT) && defined(CONFIG_PA20)
+	/* This 32-bit kernel was compiled for PA2.0 CPUs. Check current CPU
+	 * and halt kernel if we detect a PA1.x CPU. */
+	ldi		32,%r10
+	mtctl		%r10,%cr11
+	.level 2.0
+	mfctl,w		%cr11,%r10
+	.level 1.1
+	comib,<>,n	0,%r10,$cpu_ok
+
+	load32		PA(msg1),%arg0
+	ldi		msg1_end-msg1,%arg1
+$iodc_panic:
+	copy		%arg0, %r10
+	copy		%arg1, %r11
+	load32		PA(init_stack),%sp
+#define MEM_CONS 0x3A0
+	ldw		MEM_CONS+32(%r0),%arg0	// HPA
+	ldi		ENTRY_IO_COUT,%arg1
+	ldw		MEM_CONS+36(%r0),%arg2	// SPA
+	ldw		MEM_CONS+8(%r0),%arg3	// layers
+	load32		PA(__bss_start),%r1
+	stw		%r1,-52(%sp)		// arg4
+	stw		%r0,-56(%sp)		// arg5
+	stw		%r10,-60(%sp)		// arg6 = ptr to text
+	stw		%r11,-64(%sp)		// arg7 = len
+	stw		%r0,-68(%sp)		// arg8
+	load32		PA(.iodc_panic_ret), %rp
+	ldw		MEM_CONS+40(%r0),%r1	// ENTRY_IODC
+	bv,n		(%r1)
+.iodc_panic_ret:
+	b .				/* wait endless with ... */
+	or		%r10,%r10,%r10	/* qemu idle sleep */
+msg1:	.ascii "Can't boot kernel which was built for PA8x00 CPUs on this machine.\r\n"
+msg1_end:
+
+$cpu_ok:
+#endif
+
+	.level	PA_ASM_LEVEL
+
 	/* Initialize startup VM. Just map first 16/32 MB of memory */
 	load32		PA(swapper_pg_dir),%r4
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */

drivers/block/xen-blkfront.c

@@ -1852,6 +1852,12 @@ static void free_info(struct blkfront_info *info)
 	kfree(info);
 }
 
+/* Enable the persistent grants feature. */
+static bool feature_persistent = true;
+module_param(feature_persistent, bool, 0644);
+MODULE_PARM_DESC(feature_persistent,
+		"Enables the persistent grants feature");
+
 /* Common code used when first setting up, and when resuming. */
 static int talk_to_blkback(struct xenbus_device *dev,
 			   struct blkfront_info *info)
@@ -1943,6 +1949,7 @@ again:
 		message = "writing protocol";
 		goto abort_transaction;
 	}
+	info->feature_persistent_parm = feature_persistent;
 	err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u",
 			info->feature_persistent_parm);
 	if (err)
@@ -2019,12 +2026,6 @@ static int negotiate_mq(struct blkfront_info *info)
 	return 0;
 }
 
-/* Enable the persistent grants feature. */
-static bool feature_persistent = true;
-module_param(feature_persistent, bool, 0644);
-MODULE_PARM_DESC(feature_persistent,
-		"Enables the persistent grants feature");
-
 /**
  * Entry point to this code when a new device is created.  Allocate the basic
  * structures and the ring buffer for communication with the backend, and
@@ -2394,7 +2395,6 @@ static void blkfront_gather_backend_features(struct blkfront_info *info)
 	if (xenbus_read_unsigned(info->xbdev->otherend, "feature-discard", 0))
 		blkfront_setup_discard(info);
 
-	info->feature_persistent_parm = feature_persistent;
 	if (info->feature_persistent_parm)
 		info->feature_persistent =
 			!!xenbus_read_unsigned(info->xbdev->otherend,

drivers/firmware/efi/capsule-loader.c

@@ -242,29 +242,6 @@ failed:
 	return ret;
 }
 
-/**
- * efi_capsule_flush - called by file close or file flush
- * @file: file pointer
- * @id: not used
- *
- *	If a capsule is being partially uploaded then calling this function
- *	will be treated as upload termination and will free those completed
- *	buffer pages and -ECANCELED will be returned.
- **/
-static int efi_capsule_flush(struct file *file, fl_owner_t id)
-{
-	int ret = 0;
-	struct capsule_info *cap_info = file->private_data;
-
-	if (cap_info->index > 0) {
-		pr_err("capsule upload not complete\n");
-		efi_free_all_buff_pages(cap_info);
-		ret = -ECANCELED;
-	}
-
-	return ret;
-}
-
 /**
  * efi_capsule_release - called by file close
  * @inode: not used
@@ -277,6 +254,13 @@ static int efi_capsule_release(struct inode *inode, struct file *file)
 {
 	struct capsule_info *cap_info = file->private_data;
 
+	if (cap_info->index > 0 &&
+	    (cap_info->header.headersize == 0 ||
+	     cap_info->count < cap_info->total_size)) {
+		pr_err("capsule upload not complete\n");
+		efi_free_all_buff_pages(cap_info);
+	}
+
 	kfree(cap_info->pages);
 	kfree(cap_info->phys);
 	kfree(file->private_data);
@@ -324,7 +308,6 @@ static const struct file_operations efi_capsule_fops = {
 	.owner = THIS_MODULE,
 	.open = efi_capsule_open,
 	.write = efi_capsule_write,
-	.flush = efi_capsule_flush,
 	.release = efi_capsule_release,
 	.llseek = no_llseek,
 };

drivers/firmware/efi/libstub/Makefile

@@ -37,6 +37,13 @@ KBUILD_CFLAGS			:= $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \
 				   $(call cc-option,-fno-addrsig) \
 				   -D__DISABLE_EXPORTS
 
+#
+# struct randomization only makes sense for Linux internal types, which the EFI
+# stub code never touches, so let's turn off struct randomization for the stub
+# altogether
+#
+KBUILD_CFLAGS := $(filter-out $(RANDSTRUCT_CFLAGS), $(KBUILD_CFLAGS))
+
 # remove SCS flags from all objects in this directory
 KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
 # disable LTO

drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c

@@ -2146,6 +2146,9 @@ static int psp_hw_fini(void *handle)
 		psp_rap_terminate(psp);
 		psp_dtm_terminate(psp);
 		psp_hdcp_terminate(psp);
+
+		if (adev->gmc.xgmi.num_physical_nodes > 1)
+			psp_xgmi_terminate(psp);
 	}
 
 	psp_asd_unload(psp);

drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c

@@ -622,7 +622,7 @@ int amdgpu_xgmi_remove_device(struct amdgpu_device *adev)
 		amdgpu_put_xgmi_hive(hive);
 	}
 
-	return psp_xgmi_terminate(&adev->psp);
+	return 0;
 }
 
 int amdgpu_xgmi_ras_late_init(struct amdgpu_device *adev)

drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c

@@ -2570,7 +2570,8 @@ static void gfx_v9_0_constants_init(struct amdgpu_device *adev)
 
 	gfx_v9_0_tiling_mode_table_init(adev);
 
-	gfx_v9_0_setup_rb(adev);
+	if (adev->gfx.num_gfx_rings)
+		gfx_v9_0_setup_rb(adev);
 	gfx_v9_0_get_cu_info(adev, &adev->gfx.cu_info);
 	adev->gfx.config.db_debug2 = RREG32_SOC15(GC, 0, mmDB_DEBUG2);
 

drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c

@@ -178,6 +178,7 @@ static void mmhub_v1_0_init_cache_regs(struct amdgpu_device *adev)
 	tmp = REG_SET_FIELD(tmp, VM_L2_CNTL2, INVALIDATE_L2_CACHE, 1);
 	WREG32_SOC15(MMHUB, 0, mmVM_L2_CNTL2, tmp);
 
+	tmp = mmVM_L2_CNTL3_DEFAULT;
 	if (adev->gmc.translate_further) {
 		tmp = REG_SET_FIELD(tmp, VM_L2_CNTL3, BANK_SELECT, 12);
 		tmp = REG_SET_FIELD(tmp, VM_L2_CNTL3,

drivers/gpu/drm/drm_gem.c

@@ -166,21 +166,6 @@ void drm_gem_private_object_init(struct drm_device *dev,
 }
 EXPORT_SYMBOL(drm_gem_private_object_init);
 
-static void
-drm_gem_remove_prime_handles(struct drm_gem_object *obj, struct drm_file *filp)
-{
-	/*
-	 * Note: obj->dma_buf can't disappear as long as we still hold a
-	 * handle reference in obj->handle_count.
-	 */
-	mutex_lock(&filp->prime.lock);
-	if (obj->dma_buf) {
-		drm_prime_remove_buf_handle_locked(&filp->prime,
-						   obj->dma_buf);
-	}
-	mutex_unlock(&filp->prime.lock);
-}
-
 /**
  * drm_gem_object_handle_free - release resources bound to userspace handles
  * @obj: GEM object to clean up.
@@ -254,7 +239,7 @@ drm_gem_object_release_handle(int id, void *ptr, void *data)
 	else if (dev->driver->gem_close_object)
 		dev->driver->gem_close_object(obj, file_priv);
 
-	drm_gem_remove_prime_handles(obj, file_priv);
+	drm_prime_remove_buf_handle(&file_priv->prime, id);
 	drm_vma_node_revoke(&obj->vma_node, file_priv);
 
 	drm_gem_object_handle_put_unlocked(obj);