Merge "Merge 5.10.159 into android12-5.10-lts" into android12-5.10-lts

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 158
+SUBLEVEL = 159
 EXTRAVERSION =
 NAME = Dare mighty things
 

arch/alpha/kernel/rtc.c

@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create

arch/arm/boot/dts/imx7s.dtsi

@@ -1221,10 +1221,10 @@
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000 {
+		gpmi: nand-controller@33002000{
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <0>;
+			#size-cells = <1>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/rk3036-evb.dts

@@ -31,7 +31,7 @@
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -67,7 +67,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";

arch/arm/boot/dts/rk3188.dtsi

@@ -402,7 +402,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -630,7 +630,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {

arch/arm/boot/dts/rk3288-evb-act8846.dts

@@ -54,7 +54,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 

arch/arm/boot/dts/rk3288-firefly.dtsi

@@ -233,7 +233,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;

arch/arm/boot/dts/rk3288-miqi.dts

@@ -157,7 +157,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;

arch/arm/boot/dts/rk3288-rock2-square.dts

@@ -165,7 +165,7 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;

arch/arm/boot/dts/rk3xxx.dtsi

@@ -111,6 +111,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {

arch/arm/include/asm/perf_event.h

@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }

arch/arm/include/asm/pgtable-nommu.h

@@ -44,12 +44,6 @@
 
 typedef pte_t *pte_addr_t;
 
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */

arch/arm/include/asm/pgtable.h

@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -156,13 +165,6 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 #define __S111  __PAGE_SHARED_EXEC
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 

arch/arm/mm/nommu.c

@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*

arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts

@@ -13,7 +13,7 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	ir_rx {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi

@@ -448,7 +448,6 @@
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 &i2s2 {

arch/s390/kvm/vsie.c

@@ -535,8 +535,10 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_CEI))
 		scb_s->eca |= scb_o->eca & ECA_CEI;
 	/* Epoch Extension */
-	if (test_kvm_facility(vcpu->kvm, 139))
+	if (test_kvm_facility(vcpu->kvm, 139)) {
 		scb_s->ecd |= scb_o->ecd & ECD_MEF;
+		scb_s->epdx = scb_o->epdx;
+	}
 
 	/* etoken */
 	if (test_kvm_facility(vcpu->kvm, 156))

arch/x86/kernel/hpet.c

@@ -1325,8 +1325,12 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 	hpet_rtc_timer_reinit();
 	memset(&curr_time, 0, sizeof(struct rtc_time));
 
-	if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
-		mc146818_get_time(&curr_time);
+	if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) {
+		if (unlikely(mc146818_get_time(&curr_time) < 0)) {
+			pr_err_ratelimited("unable to read current time from RTC\n");
+			return IRQ_HANDLED;
+		}
+	}
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {

drivers/base/power/trace.c

@@ -120,7 +120,11 @@ static unsigned int read_magic_time(void)
 	struct rtc_time time;
 	unsigned int val;
 
-	mc146818_get_time(&time);
+	if (mc146818_get_time(&time) < 0) {
+		pr_err("Unable to read current time from RTC\n");
+		return 0;
+	}
+
 	pr_info("RTC time: %ptRt, date: %ptRd\n", &time, &time);
 	val = time.tm_year;				/* 100 years */
 	if (val > 100)