resolve_btfids prints a warning when it finds an unresolved symbol,
(id == 0) in id_patch. This can be the case for BTF sets that are empty
(due to disabled config options), hence printing warnings for certain
builds, most recently seen in [0].
The reason behind this is because id->cnt aliases id->id in btf_id
struct, leading to empty set showing up as ID 0 when we get to id_patch,
which triggers the warning. Since sets are an exception here, accomodate
by reusing hole in btf_id for bool is_set member, setting it to true for
BTF set when setting id->cnt, and use that to skip extraneous warning.
[0]: https://lore.kernel.org/all/1b99ae14-abb4-d18f-cc6a-d7e523b25542@gmail.com
Before:
; ./tools/bpf/resolve_btfids/resolve_btfids -v -b vmlinux net/ipv4/tcp_cubic.ko
adding symbol tcp_cubic_kfunc_ids
WARN: resolve_btfids: unresolved symbol tcp_cubic_kfunc_ids
patching addr 0: ID 0 [tcp_cubic_kfunc_ids]
sorting addr 4: cnt 0 [tcp_cubic_kfunc_ids]
update ok for net/ipv4/tcp_cubic.ko
After:
; ./tools/bpf/resolve_btfids/resolve_btfids -v -b vmlinux net/ipv4/tcp_cubic.ko
adding symbol tcp_cubic_kfunc_ids
patching addr 0: ID 0 [tcp_cubic_kfunc_ids]
sorting addr 4: cnt 0 [tcp_cubic_kfunc_ids]
update ok for net/ipv4/tcp_cubic.ko
Fixes: 0e32dfc80b ("bpf: Enable TCP congestion control kfunc from modules")
Reported-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122144742.477787-4-memxor@gmail.com
Commit be79505caf ("tools/runqslower: Install libbpf headers when
building") uses the target libbpf to build the host bpftool, which
doesn't work when cross-building:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/runqslower O=/tmp/runqslower
...
LINK /tmp/runqslower/bpftool/bpftool
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a(libbpf-in.o): Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
When cross-building, the target architecture differs from the host. The
bpftool used for building runqslower is executed on the host, and thus
must use a different libbpf than that used for runqslower itself.
Remove the LIBBPF_OUTPUT and LIBBPF_DESTDIR parameters, so the bpftool
build makes its own library if necessary.
In the selftests, pass the host bpftool, already a prerequisite for the
runqslower recipe, as BPFTOOL_OUTPUT. The runqslower Makefile will use
the bpftool that's already built for selftests instead of making a new
one.
Fixes: be79505caf ("tools/runqslower: Install libbpf headers when building")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211112155128.565680-1-jean-philippe@linaro.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We recently changed bpftool's Makefile to make it install libbpf's
headers locally instead of pulling them from the source directory of the
library. Although bpftool needs two versions of libbpf, a "regular" one
and a "bootstrap" version, we would only install headers for the regular
libbpf build. Given that this build always occurs before the bootstrap
build when building bpftool, this is enough to ensure that the bootstrap
bpftool will have access to the headers exported through the regular
libbpf build.
However, this did not account for the case when we only want the
bootstrap version of bpftool, through the "bootstrap" target. For
example, perf needs the bootstrap version only, to generate BPF
skeletons. In that case, when are the headers installed? For some time,
the issue has been masked, because we had a step (the installation of
headers internal to libbpf) which would depend on the regular build of
libbpf and hence trigger the export of the headers, just for the sake of
creating a directory. But this changed with commit 8b6c46241c
("bpftool: Remove Makefile dep. on $(LIBBPF) for
$(LIBBPF_INTERNAL_HDRS)"), where we cleaned up that stage and removed
the dependency on the regular libbpf build. As a result, when we only
want the bootstrap bpftool version, the regular libbpf is no longer
built. The bootstrap libbpf version is built, but headers are not
exported, and the bootstrap bpftool build fails because of the missing
headers.
To fix this, we also install the library headers for the bootstrap
version of libbpf, to use them for the bootstrap bpftool and for
generating the skeletons.
Fixes: f012ade10b ("bpftool: Install libbpf headers instead of including the dir")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20211105015813.6171-1-quentin@isovalent.com
In order to show PIDs and names for processes holding references to BPF
programs, maps, links, or BTF objects, bpftool creates hash maps to
store all relevant information. This commit is part of a set that
transitions from the kernel's hash map implementation to the one coming
with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This is the third and final step of the transition, in which we convert
the hash maps used for storing the information about the processes
holding references to BPF objects (programs, maps, links, BTF), and at
last we drop the inclusion of tools/include/linux/hashtable.h.
Note: Checkpatch complains about the use of __weak declarations, and the
missing empty lines after the bunch of empty function declarations when
compiling without the BPF skeletons (none of these were introduced in
this patch). We want to keep things as they are, and the reports should
be safe to ignore.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-6-quentin@isovalent.com
In order to show BPF programs and maps using BTF objects when the latter
are being listed, bpftool creates hash maps to store all relevant items.
This commit is part of a set that transitions from the kernel's hash map
implementation to the one coming with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This commit focuses on the two hash maps used by bpftool when listing
BTF objects to store references to programs and maps, and convert them
to the libbpf's implementation.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-5-quentin@isovalent.com
In order to show pinned paths for BPF programs, maps, or links when
listing them with the "-f" option, bpftool creates hash maps to store
all relevant paths under the bpffs. So far, it would rely on the
kernel implementation (from tools/include/linux/hashtable.h).
We can make bpftool rely on libbpf's implementation instead. The
motivation is to make bpftool less dependent of kernel headers, to ease
the path to a potential out-of-tree mirror, like libbpf has.
This commit is the first step of the conversion: the hash maps for
pinned paths for programs, maps, and links are converted to libbpf's
hashmap.{c,h}. Other hash maps used for the PIDs of process holding
references to BPF objects are left unchanged for now. On the build side,
this requires adding a dependency to a second header internal to libbpf,
and making it a dependency for the bootstrap bpftool version as well.
The rest of the changes are a rather straightforward conversion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-4-quentin@isovalent.com
BPF programs, maps, and links, can all be listed with their pinned paths
by bpftool, when the "-f" option is provided. To do so, bpftool builds
hash maps containing all pinned paths for each kind of objects.
These three hash maps are always initialised in main.c, and exposed
through main.h. There appear to be no particular reason to do so: we can
just as well make them static to the files that need them (prog.c,
map.c, and link.c respectively), and initialise them only when we want
to show objects and the "-f" switch is provided.
This may prevent unnecessary memory allocations if the implementation of
the hash maps was to change in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-3-quentin@isovalent.com
The dependency is only useful to make sure that the $(LIBBPF_HDRS_DIR)
directory is created before we try to install locally the required
libbpf internal header. Let's create this directory properly instead.
This is in preparation of making $(LIBBPF_INTERNAL_HDRS) a dependency to
the bootstrap bpftool version, in which case we want no dependency on
$(LIBBPF).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-2-quentin@isovalent.com
Bpftool creates a new JSON object for writing program metadata in plain
text mode, regardless of metadata being present or not. Then this writer
is freed if any metadata has been found and printed, but it leaks
otherwise. We cannot destroy the object unconditionally, because the
destructor prints an undesirable line break. Instead, make sure the
writer is created only after we have found program metadata to print.
Found with valgrind.
Fixes: aff52e685e ("bpftool: Support dumping metadata")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022094743.11052-1-quentin@isovalent.com
It can happen that some data sections (e.g., .rodata.cst16, containing
compiler populated string constants) won't have a corresponding BTF
DATASEC type. Now that libbpf supports .rodata.* and .data.* sections,
situation like that will cause invalid BPF skeleton to be generated that
won't compile successfully, as some parts of skeleton would assume
memory-mapped struct definitions for each special data section.
Fix this by generating empty struct definitions for such data sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-7-andrii@kernel.org
Remove the assumption about only single instance of each of .rodata and
.data internal maps. Nothing changes for '.rodata' and '.data' maps, but new
'.rodata.something' map will get 'rodata_something' section in BPF
skeleton for them (as well as having struct bpf_map * field in maps
section with the same field name).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-6-andrii@kernel.org
One of bpftool's object files depends on zlib. To make sure we do not
attempt to build that object when the library is not available, commit
d66fa3c70e ("tools: bpftool: add feature check for zlib") introduced a
feature check to detect whether zlib is present.
This check comes as a rule for which the target ("zdep") is a
nonexistent file (phony target), which means that the Makefile always
attempts to rebuild it. It is mostly harmless. However, one side effect
is that, on running again once bpftool is already built, make considers
that "something" (the recipe for zdep) was executed, and does not print
the usual message "make: Nothing to be done for 'all'", which is a
user-friendly indicator that the build went fine.
Before, with some level of debugging information:
$ make --debug=m
[...]
Reading makefiles...
Auto-detecting system features:
... libbfd: [ on ]
... disassembler-four-args: [ on ]
... zlib: [ on ]
... libcap: [ on ]
... clang-bpf-co-re: [ on ]
Updating makefiles....
Updating goal targets....
File 'all' does not exist.
File 'zdep' does not exist.
Must remake target 'zdep'.
File 'all' does not exist.
Must remake target 'all'.
Successfully remade target file 'all'.
After the patch:
$ make --debug=m
[...]
Auto-detecting system features:
... libbfd: [ on ]
... disassembler-four-args: [ on ]
... zlib: [ on ]
... libcap: [ on ]
... clang-bpf-co-re: [ on ]
Updating makefiles....
Updating goal targets....
File 'all' does not exist.
Must remake target 'all'.
Successfully remade target file 'all'.
make: Nothing to be done for 'all'.
(Note the last line, which is not part of make's debug information.)
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211009210341.6291-4-quentin@isovalent.com
In bpftool's Makefile, libbpf has a FORCE dependency, to make sure we
rebuild it in case its source files changed. Let's instead make the
rebuild depend on the source files directly, through a call to the
"$(wildcard ...)" function. This avoids descending into libbpf's
directory if there is nothing to update.
Do the same for the bootstrap libbpf version.
This results in a slightly faster operation and less verbose output when
running make a second time in bpftool's directory.
Before:
Auto-detecting system features:
... libbfd: [ on ]
... disassembler-four-args: [ on ]
... zlib: [ on ]
... libcap: [ on ]
... clang-bpf-co-re: [ on ]
make[1]: Entering directory '/root/dev/linux/tools/lib/bpf'
make[1]: Entering directory '/root/dev/linux/tools/lib/bpf'
make[1]: Nothing to be done for 'install_headers'.
make[1]: Leaving directory '/root/dev/linux/tools/lib/bpf'
make[1]: Leaving directory '/root/dev/linux/tools/lib/bpf'
After:
Auto-detecting system features:
... libbfd: [ on ]
... disassembler-four-args: [ on ]
... zlib: [ on ]
... libcap: [ on ]
... clang-bpf-co-re: [ on ]
Other ways to clean up the output could be to pass the "-s" option, or
to redirect the output to >/dev/null, when calling make recursively to
descend into libbpf's directory. However, this would suppress some
useful output if something goes wrong during the build. A better
alternative would be to pass "--no-print-directory" to the recursive
make, but that would still leave us with some noise for
"install_headers". Skipping the descent into libbpf's directory if no
source file has changed works best, and seems the most logical option
overall.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211009210341.6291-3-quentin@isovalent.com
We recently updated bpftool's Makefile to make it install the headers
from libbpf, instead of pulling them directly from libbpf's directory.
There is also an additional header, internal to libbpf, that needs be
installed. The way that bpftool's Makefile installs that particular
header is currently correct, but would break if we were to modify
$(LIBBPF_INTERNAL_HDRS) to make it point to more than one header.
Use a static pattern rule instead, so that the Makefile can withstand
the addition of other headers to install.
The objective is simply to make the Makefile more robust. It should
_not_ be read as an invitation to import more internal headers from
libbpf into bpftool.
Fixes: f012ade10b ("bpftool: Install libbpf headers instead of including the dir")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211009210341.6291-2-quentin@isovalent.com
Patch set [1] introduced BTF_KIND_TAG to allow tagging
declarations for struct/union, struct/union field, var, func
and func arguments and these tags will be encoded into
dwarf. They are also encoded to btf by llvm for the bpf target.
After BTF_KIND_TAG is introduced, we intended to use it
for kernel __user attributes. But kernel __user is actually
a type attribute. Upstream and internal discussion showed
it is not a good idea to mix declaration attribute and
type attribute. So we proposed to introduce btf_type_tag
as a type attribute and existing btf_tag renamed to
btf_decl_tag ([2]).
This patch renamed BTF_KIND_TAG to BTF_KIND_DECL_TAG and some
other declarations with *_tag to *_decl_tag to make it clear
the tag is for declaration. In the future, BTF_KIND_TYPE_TAG
might be introduced per [3].
[1] https://lore.kernel.org/bpf/20210914223004.244411-1-yhs@fb.com/
[2] https://reviews.llvm.org/D111588
[3] https://reviews.llvm.org/D111199
Fixes: b5ea834dde ("bpf: Support for new btf kind BTF_KIND_TAG")
Fixes: 5b84bd1036 ("libbpf: Add support for BTF_KIND_TAG")
Fixes: 5c07f2fec0 ("bpftool: Add support for BTF_KIND_TAG")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211012164838.3345699-1-yhs@fb.com
With "make install", bpftool installs its binary and its bash completion
file. Usually, this is what we want. But a few components in the kernel
repository (namely, BPF iterators and selftests) also install bpftool
locally before using it. In such a case, bash completion is not
necessary and is just a useless build artifact.
Let's add an "install-bin" target to bpftool, to offer a way to install
the binary only.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-13-quentin@isovalent.com
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that runqslower installs the
headers properly when building.
We use a libbpf_hdrs target to mark the logical dependency on libbpf's
headers export for a number of object files, even though the headers
should have been exported at this time (since bpftool needs them, and is
required to generate the skeleton or the vmlinux.h).
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
BPFOBJ_OUTPUT and BPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests. We pass a number of
variables to the "make" invocation, because we want to point runqslower
to the (target) libbpf shared with other tools, instead of building its
own version. In addition, runqslower relies on (target) bpftool, and we
also want to pass the proper variables to its Makefile so that bpftool
itself reuses the same libbpf.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-6-quentin@isovalent.com
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that resolve_btfids installs the
headers properly when building.
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
LIBBPF_OUT and LIBBPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests in order to point to the
(target) libbpf shared with other tools, instead of building a version
specific to resolve_btfids. Remove libbpf's order-only dependencies on
the include directories (they are created by libbpf and don't need to
exist beforehand).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-5-quentin@isovalent.com
Bpftool relies on libbpf, therefore it relies on a number of headers
from the library and must be linked against the library. The Makefile
for bpftool exposes these objects by adding tools/lib as an include
directory ("-I$(srctree)/tools/lib"). This is a working solution, but
this is not the cleanest one. The risk is to involuntarily include
objects that are not intended to be exposed by the libbpf.
The headers needed to compile bpftool should in fact be "installed" from
libbpf, with its "install_headers" Makefile target. In addition, there
is one header which is internal to the library and not supposed to be
used by external applications, but that bpftool uses anyway.
Adjust the Makefile in order to install the header files properly before
compiling bpftool. Also copy the additional internal header file
(nlattr.h), but call it out explicitly. Build (and install headers) in a
subdirectory under bpftool/ instead of tools/lib/bpf/. When descending
from a parent Makefile, this is configurable by setting the OUTPUT,
LIBBPF_OUTPUT and LIBBPF_DESTDIR variables.
Also adjust the Makefile for BPF selftests, so as to reuse the (host)
libbpf compiled earlier and to avoid compiling a separate version of the
library just for bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-4-quentin@isovalent.com
This commit allows specifying the base BTF for resolving btf id
lists/sets during link time in the resolve_btfids tool. The base BTF is
set to NULL if no path is passed. This allows resolving BTF ids for
module kernel objects.
Also, drop the --no-fail option, as it is only used in case .BTF_ids
section is not present, instead make no-fail the default mode. The long
option name is same as that of pahole.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-5-memxor@gmail.com
