mirror of
https://github.com/armbian/linux-cix.git
synced 2026-01-06 12:30:45 -08:00
ce80098db2439ee44403ec6fccd3a10be21c7aff
6505 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
e8f023caee |
Merge tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann: "This is a single cleanup from Peter Collingbourne, removing some dead code" * tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: remove unused function syscall_set_arguments() |
||
|
Linus Torvalds
|
0c5c62ddf8 |
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
|
||
|
Linus Torvalds
|
512b7931ad |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ... |
||
David Hildenbrand
|
50f9481ed9 |
mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSE
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Christophe Leroy
|
e012a25d81 |
powerpc: use generic version of arch_is_kernel_initmem_freed()
The generic version of arch_is_kernel_initmem_freed() now does the same as powerpc version. Remove the powerpc version. Link: https://lkml.kernel.org/r/c53764eb45d41491e2b21da2e7812239897dbebb.1633001016.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
5c0b0c676a |
Merge tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Enable STRICT_KERNEL_RWX for Freescale 85xx platforms. - Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled. - Add support for out-of-line static calls on 32-bit. - Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled. - Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault(). - Fix several bugs on pseries in handling of device tree cache information for hotplugged CPUs, and/or during partition migration. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant Hegde, Wan Jiabing, and Xiaoming Ni, * tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits) powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST powerpc/32e: Ignore ESR in instruction storage interrupt handler powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC MAINTAINERS: Update powerpc KVM entry powerpc/xmon: fix task state output powerpc/44x/fsp2: add missing of_node_put powerpc/dcr: Use cmplwi instead of 3-argument cmpli KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling powerpc/security: Use a mutex for interrupt exit code patching powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs powerpc/book3e: Fix set_memory_x() and set_memory_nx() powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect() powerpc/bpf: Fix write protecting JIT code selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh powerpc/64s/interrupt: Fix check_return_regs_valid() false positive powerpc/boot: Set LC_ALL=C in wrapper script powerpc/64s: Default to 64K pages for 64 bit book3s Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC" ... |
||
|
Linus Torvalds
|
d7e0a795bf |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
|
||
|
Linus Torvalds
|
79ef0c0014 |
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ... |
||
|
Linus Torvalds
|
bf953917be |
Merge tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
|
||
|
Linus Torvalds
|
01463374c5 |
Merge tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
"Cross-architecture update to move task_struct::cpu back into
thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
maintainers.
Quoting Ard Biesheuvel:
'Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that
define raw_smp_processor_id() in terms of this field, as it
requires linux/sched.h to be included, which causes a lot of pain
in terms of circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from)
for all architectures that enable THREAD_INFO_IN_TASK, addressing
the header soup issue as well as some pointless differences in the
implementations of task_cpu() and set_task_cpu()'"
* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
riscv: rely on core code to keep thread_info::cpu updated
powerpc: smp: remove hack to obtain offset of task_struct::cpu
sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
powerpc: add CPU field to struct thread_info
s390: add CPU field to struct thread_info
x86: add CPU field to struct thread_info
arm64: add CPU field to struct thread_info
|
||
|
Linus Torvalds
|
6e5772c8d9 |
Merge tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic confidential computing updates from Borislav Petkov: "Add an interface called cc_platform_has() which is supposed to be used by confidential computing solutions to query different aspects of the system. The intent behind it is to unify testing of such aspects instead of having each confidential computing solution add its own set of tests to code paths in the kernel, leading to an unwieldy mess" * tag 'x86_cc_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide: Replace the use of mem_encrypt_active() with cc_platform_has() x86/sev: Replace occurrences of sev_es_active() with cc_platform_has() x86/sev: Replace occurrences of sev_active() with cc_platform_has() x86/sme: Replace occurrences of sme_active() with cc_platform_has() powerpc/pseries/svm: Add a powerpc version of cc_platform_has() x86/sev: Add an x86 version of cc_platform_has() arch/cc: Introduce a function to check for confidential computing features x86/ioremap: Selectively build arch override encryption functions |
||
|
Linus Torvalds
|
9a7e0a90a4 |
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ... |
||
|
Linus Torvalds
|
595b28fb0c |
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
|
||
Arnd Bergmann
|
f98a3dccfc |
locking: Remove spin_lock_flags() etc
parisc, ia64 and powerpc32 are the only remaining architectures that
provide custom arch_{spin,read,write}_lock_flags() functions, which are
meant to re-enable interrupts while waiting for a spinlock.
However, none of these can actually run into this codepath, because
it is only called on architectures without CONFIG_GENERIC_LOCKBREAK,
or when CONFIG_DEBUG_LOCK_ALLOC is set without CONFIG_LOCKDEP, and none
of those combinations are possible on the three architectures.
Going back in the git history, it appears that arch/mn10300 may have
been able to run into this code path, but there is a good chance that
it never worked. On the architectures that still exist, it was
already impossible to hit back in 2008 after the introduction of
CONFIG_GENERIC_LOCKBREAK, and possibly earlier.
As this is all dead code, just remove it and the helper functions built
around it. For arch/ia64, the inline asm could be cleaned up, but
it seems safer to leave it untouched.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20211022120058.1031690-1-arnd@kernel.org
|
||
Michael Ellerman
|
5b9f69ffa6 |
Merge branch 'topic/ppc-kvm' into next
Merge a couple of KVM ppc patches we are keeping in a topic branch. |
||
|
Christophe Leroy
|
b6cb20fdc2 |
powerpc/book3e: Fix set_memory_x() and set_memory_nx()
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes:
|
||
|
Christophe Leroy
|
b1b93cb7e7 |
powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
Commit |
||
|
Michael Ellerman
|
b7472e1764 |
Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
This reverts commit
|
||
|
Christophe Leroy
|
c7d19189d7 |
powerpc/32: Don't use a struct based type for pte_t
Long time ago we had a config item called STRICT_MM_TYPECHECKS to build the kernel with pte_t defined as a structure in order to perform additional build checks or build it with pte_t defined as a simple type in order to get simpler generated code. Commit |
||
|
Christophe Leroy
|
63f501e07a |
powerpc/8xx: Simplify TLB handling
In the old days, TLB handling for 8xx was using tlbie and tlbia instructions directly as much as possible. But commit |
||
|
Christophe Leroy
|
5c810ced36 |
powerpc/32: Add support for out-of-line static calls
Add support for out-of-line static calls on PPC32. This change improve performance of calls to global function pointers by using direct calls instead of indirect calls. The trampoline is initialy populated with a 'blr' or branch to target, followed by an unreachable long jump sequence. In order to cater with parallele execution, the trampoline needs to be updated in a way that ensures it remains consistent at all time. This means we can't use the traditional lis/addi to load r12 with the target address, otherwise there would be a window during which the first instruction contains the upper part of the new target address while the second instruction still contains the lower part of the old target address. To avoid that the target address is stored just after the 'bctr' and loaded from there with a single instruction. Then, depending on the target distance, arch_static_call_transform() will either replace the first instruction by a direct 'bl <target>' or 'nop' in order to have the trampoline fall through the long jump sequence. For the special case of __static_call_return0(), to avoid the risk of a far branch, a version of it is inlined at the end of the trampoline. Performancewise the long jump sequence is probably not better than the indirect calls set by GCC when we don't use static calls, but such calls are unlikely to be required on powerpc32: With most configurations the kernel size is far below 32 Mbytes so only modules may happen to be too far. And even modules are likely to be close enough as they are allocated below the kernel core and as close as possible of the kernel text. static_call selftest is running successfully with this change. With this patch, __do_irq() has the following sequence to trace irq entries: c0004a00 <__SCT__tp_func_irq_entry>: c0004a00: 48 00 00 e0 b c0004ae0 <__traceiter_irq_entry> c0004a04: 3d 80 c0 00 lis r12,-16384 c0004a08: 81 8c 4a 1c lwz r12,18972(r12) c0004a0c: 7d 89 03 a6 mtctr r12 c0004a10: 4e 80 04 20 bctr c0004a14: 38 60 00 00 li r3,0 c0004a18: 4e 80 00 20 blr c0004a1c: 00 00 00 00 .long 0x0 ... c0005654 <__do_irq>: ... c0005664: 7c 7f 1b 78 mr r31,r3 ... c00056a0: 81 22 00 00 lwz r9,0(r2) c00056a4: 39 29 00 01 addi r9,r9,1 c00056a8: 91 22 00 00 stw r9,0(r2) c00056ac: 3d 20 c0 af lis r9,-16209 c00056b0: 81 29 74 cc lwz r9,29900(r9) c00056b4: 2c 09 00 00 cmpwi r9,0 c00056b8: 41 82 00 10 beq c00056c8 <__do_irq+0x74> c00056bc: 80 69 00 04 lwz r3,4(r9) c00056c0: 7f e4 fb 78 mr r4,r31 c00056c4: 4b ff f3 3d bl c0004a00 <__SCT__tp_func_irq_entry> Before this patch, __do_irq() was doing the following to trace irq entries: c0005700 <__do_irq>: ... c0005710: 7c 7e 1b 78 mr r30,r3 ... c000574c: 93 e1 00 0c stw r31,12(r1) c0005750: 81 22 00 00 lwz r9,0(r2) c0005754: 39 29 00 01 addi r9,r9,1 c0005758: 91 22 00 00 stw r9,0(r2) c000575c: 3d 20 c0 af lis r9,-16209 c0005760: 83 e9 f4 cc lwz r31,-2868(r9) c0005764: 2c 1f 00 00 cmpwi r31,0 c0005768: 41 82 00 24 beq c000578c <__do_irq+0x8c> c000576c: 81 3f 00 00 lwz r9,0(r31) c0005770: 80 7f 00 04 lwz r3,4(r31) c0005774: 7d 29 03 a6 mtctr r9 c0005778: 7f c4 f3 78 mr r4,r30 c000577c: 4e 80 04 21 bctrl c0005780: 85 3f 00 0c lwzu r9,12(r31) c0005784: 2c 09 00 00 cmpwi r9,0 c0005788: 40 82 ff e4 bne c000576c <__do_irq+0x6c> Behind the fact of now using a direct 'bl' instead of a 'load/mtctr/bctr' sequence, we can also see that we get one less register on the stack. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6ec2a7865ed6a5ec54ab46d026785bafe1d837ea.1630484892.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
8f7fadb4ba |
powerpc/machdep: Remove stale functions from ppc_md structure
ppc_md.iommu_save() is not set anymore by any platform after commit |
||
|
Christophe Leroy
|
566af8cda3 |
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
Commit |
||
|
Christophe Leroy
|
a85c728cb5 |
powerpc/32: Don't use lmw/stmw for saving/restoring non volatile regs
Instructions lmw/stmw are interesting for functions that are rarely used and not in the cache, because only one instruction is to be copied into the instruction cache instead of 19. However those instruction are less performant than 19x raw lwz/stw as they require synchronisation plus one additional cycle. SAVE_NVGPRS / REST_NVGPRS are used in only a few places which are mostly in interrupts entries/exits and in task switch so they are likely already in the cache. Using standard lwz improves null_syscall selftest by: - 10 cycles on mpc832x. - 2 cycles on mpc8xx. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/316c543b8906712c108985c8463eec09c8db577b.1629732542.git.christophe.leroy@csgroup.eu |
||
Joel Stanley
|
4f703e7faa |
powerpc/s64: Clarify that radix lacks DEBUG_PAGEALLOC
The page_alloc.c code will call into __kernel_map_pages() when DEBUG_PAGEALLOC is configured and enabled. As the implementation assumes hash, this should crash spectacularly if not for a bit of luck in __kernel_map_pages(). In this function linear_map_hash_count is always zero, the for loop exits without doing any damage. There are no other platforms that determine if they support debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to do that, this change turns the map/unmap into a noop when in radix mode and prints a warning once. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Reformat if per Christophe's suggestion] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au |