'struct percpu_ref' is often embedded into one user structure, and the
instance is usually referenced in fast path, however actually only
'percpu_count_ptr' is needed in fast path.
So move other fields into one new structure of 'percpu_ref_data', and
allocate it dynamically via kzalloc(), then memory footprint of
'percpu_ref' in fast path is reduced a lot and becomes suitable to put
into hot cacheline of user structure.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Veronika Kabatova <vkabatov@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
smp_read_barrier_depends() doesn't exist any more, so reword the two
comments that mention it to refer to "dependency ordering" instead.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Add percpu_ref_tryget_many(), which works the same way as
percpu_ref_tryget(), but grabs specified number of refs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a revert of commit
a4244454df ("percpu-refcount: use RCU-sched insted of normal RCU")
which claims the only reason for using RCU-sched is
"rcu_read_[un]lock() … are slightly more expensive than preempt_disable/enable()"
and
"As the RCU critical sections are extremely short, using sched-RCU
shouldn't have any latency implications."
The problem with using RCU-sched here is that it disables preemption and
the release callback (called from percpu_ref_put_many()) must not
acquire any sleeping locks like spinlock_t. This breaks PREEMPT_RT
because some of the users acquire spinlock_t locks in their callbacks.
Using rcu_read_lock() on PREEMPTION=n kernels is not any different
compared to rcu_read_lock_sched(). On PREEMPTION=y kernels there are
already performance issues due to additional preemption points.
Looking at the code, the rcu_read_lock() is just an increment and unlock
is almost just a decrement unless there is something special to do. Both
are functions while disabling preemption is inlined.
Doing a small benchmark, the minimal amount of time required was mostly
the same. The average time required was higher due to the higher MAX
value (which could be preemption). With DEBUG_PREEMPT=y it is
rcu_read_lock_sched() that takes a little longer due to the additional
debug code.
Convert back to normal RCU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Release percpu memory after finishing the switch to the atomic mode
if only PERCPU_REF_ALLOW_REINIT isn't set.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
In most cases percpu reference counters are not switched to the
percpu mode after they reach the atomic mode. Some obvious exceptions
are reference counters which are initialized into the atomic
mode (using PERCPU_REF_INIT_ATOMIC and PERCPU_REF_INIT_DEAD flags),
and there are few other exceptions.
But in most cases there is no way back, and once the reference counter
is switched to the atomic mode, there is no reason to wait for
percpu_ref_exit() to release the percpu memory. Of course, the size
of a single counter is not so big, but because it can pin the whole
percpu block in memory, the memory footprint can be noticeable
(e.g. on my 32 CPUs machine a percpu block is 8Mb large).
To make releasing of the percpu memory as early as possible, let's
introduce the PERCPU_REF_ALLOW_REINIT flag with the following semantics:
it has to be set in order to switch a percpu reference counter to the
percpu mode after the initialization. PERCPU_REF_INIT_ATOMIC and
PERCPU_REF_INIT_DEAD flags will implicitly assume PERCPU_REF_ALLOW_REINIT.
This patch doesn't introduce any functional change to avoid any
regressions. It will be done later in the patchset after adjusting
all call sites, which are reviving percpu counters.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
This function will be used in a later patch to switch the struct
request_queue q_usage_counter from killed back to live. In contrast
to percpu_ref_reinit(), this new function does not require that the
refcount is zero.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
percpu_ref internally uses sched-RCU to implement the percpu -> atomic
mode switching and the documentation suggested that this could be
depended upon. This doesn't seem like a good idea.
* percpu_ref uses sched-RCU which has different grace periods regular
RCU. Users may combine percpu_ref with regular RCU usage and
incorrectly believe that regular RCU grace periods are performed by
percpu_ref. This can lead to, for example, use-after-free due to
premature freeing.
* percpu_ref has a grace period when switching from percpu to atomic
mode. It doesn't have one between the last put and release. This
distinction is subtle and can lead to surprising bugs.
* percpu_ref allows starting in and switching to atomic mode manually
for debugging and other purposes. This means that there may not be
any grace periods from kill to release.
This patch makes it clear that the grace periods are percpu_ref's
internal implementation detail and can't be depended upon by the
users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Because READ_ONCE() now implies smp_read_barrier_depends(), this commit
removes the now-redundant smp_read_barrier_depends() following the
READ_ONCE() in __ref_is_percpu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
percpu_ref_switch_to_atomic_sync() schedules the switch to atomic mode, then
waits for it to complete.
Also export percpu_ref_switch_to_* so they can be used from modules.
This will be used in md/raid to count the number of pending write
requests to an array.
We occasionally need to check if the count is zero, but most often
we don't care.
We always want updates to the counter to be fast, as in some cases
we count every 4K page.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
percpu_ref_tryget() and percpu_ref_tryget_live() should return
"true" IFF they acquire a reference. But the return value from
atomic_long_inc_not_zero() is a long and may have high bits set,
e.g. PERCPU_COUNT_BIAS, and the return value of the tryget routines
is bool so the reference may actually be acquired but the routines
return "false" which results in a reference leak since the caller
assumes it does not need to do a corresponding percpu_ref_put().
This was seen when performing CPU hotplug during I/O, as hangs in
blk_mq_freeze_queue_wait where percpu_ref_kill (blk_mq_freeze_queue_start)
raced with percpu_ref_tryget (blk_mq_timeout_work).
Sample stack trace:
__switch_to+0x2c0/0x450
__schedule+0x2f8/0x970
schedule+0x48/0xc0
blk_mq_freeze_queue_wait+0x94/0x120
blk_mq_queue_reinit_work+0xb8/0x180
blk_mq_queue_reinit_prepare+0x84/0xa0
cpuhp_invoke_callback+0x17c/0x600
cpuhp_up_callbacks+0x58/0x150
_cpu_up+0xf0/0x1c0
do_cpu_up+0x120/0x150
cpu_subsys_online+0x64/0xe0
device_online+0xb4/0x120
online_store+0xb4/0xc0
dev_attr_store+0x68/0xa0
sysfs_kf_write+0x80/0xb0
kernfs_fop_write+0x17c/0x250
__vfs_write+0x6c/0x1e0
vfs_write+0xd0/0x270
SyS_write+0x6c/0x110
system_call+0x38/0xe0
Examination of the queue showed a single reference (no PERCPU_COUNT_BIAS,
and __PERCPU_REF_DEAD, __PERCPU_REF_ATOMIC set) and no requests.
However, conditions at the time of the race are count of PERCPU_COUNT_BIAS + 0
and __PERCPU_REF_DEAD and __PERCPU_REF_ATOMIC set.
The fix is to make the tryget routines use an actual boolean internally instead
of the atomic long result truncated to a int.
Fixes: e625305b39 percpu-refcount: make percpu_ref based on longs instead of ints
Link: https://bugzilla.kernel.org/show_bug.cgi?id=190751
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: e625305b39 ("percpu-refcount: make percpu_ref based on longs instead of ints")
Cc: stable@vger.kernel.org # v3.18+
Implement percpu_ref_is_dying() which tests whether the ref is dying
or dead. This is useful to determine the current state when a
percpu_ref is used as a cyclic on/off switch via kill and reinit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
__ref_is_percpu() needs the implied ACCESS_ONCE() in
lockless_dereference() on @ref->percpu_count_ptr because the value is
tested for !__PERCPU_REF_ATOMIC, which may be set asynchronously, and
then used as a pointer. If the compiler generates a separate fetch
when using it as a pointer, __PERCPU_REF_ATOMIC may be set in between
contaminating the pointer value.
percpu_ref_tryget_live() also uses ACCESS_ONCE() to test
__PERCPU_REF_DEAD; however, there's no reason for this. I just copied
ACCESS_ONCE() usage blindly from __ref_is_percpu(). All it does is
confusing people trying to understand what's going on.
This patch removes the unnecessary ACCESS_ONCE() usage from
percpu_ref_tryget_live() and adds a comment explaining why
__ref_is_percpu() needs it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Pull percpu updates from Tejun Heo:
"Nothing interesting. A patch to convert the remaining __get_cpu_var()
users, another to fix non-critical off-by-one in an assertion and a
cosmetic conversion to lockless_dereference() in percpu-ref.
The back-merge from mainline is to receive lockless_dereference()"
* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Replace smp_read_barrier_depends() with lockless_dereference()
percpu: Convert remaining __get_cpu_var uses in 3.18-rcX
percpu: off by one in BUG_ON()
Charges currently pin the css indirectly by playing tricks during
css_offline(): user pages stall the offlining process until all of them
have been reparented, whereas kmemcg acquires a keep-alive reference if
outstanding kernel pages are detected at that point.
In preparation for removing all this complexity, make the pinning explicit
and acquire a css references for every charged page.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While decoupling ATOMIC and DEAD flags, f47ad45784 ("percpu_ref:
decouple switching to percpu mode and reinit") updated
__ref_is_percpu() so that it only tests ATOMIC flag to determine
whether the ref is in percpu mode or not; however, while DEAD implies
ATOMIC, the two flags are set separately during percpu_ref_kill() and
if __ref_is_percpu() races percpu_ref_kill(), it may see DEAD w/o
ATOMIC. Because __ref_is_percpu() returns @ref->percpu_count_ptr
value verbatim as the percpu pointer after testing ATOMIC, the pointer
may now be contaminated with the DEAD flag.
This can be fixed by clearing the flag bits before returning the
pointer which was the fix proposed by Shaohua; however, as DEAD
implies ATOMIC, we can just test for both flags at once and avoid the
explicit masking.
Update __ref_is_percpu() so that it tests that both ATOMIC and DEAD
are clear before returning @ref->percpu_count_ptr as the percpu
pointer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Reviewed-by: Shaohua Li <shli@kernel.org>
Link: http://lkml.kernel.org/r/995deb699f5b873c45d667df4add3b06f73c2c25.1416638887.git.shli@kernel.org
Fixes: f47ad45784 ("percpu_ref: decouple switching to percpu mode and reinit")
Recently lockless_dereference() was added which can be used in place of
hard-coding smp_read_barrier_depends(). The following PATCH makes the change.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull percpu updates from Tejun Heo:
"A lot of activities on percpu front. Notable changes are...
- percpu allocator now can take @gfp. If @gfp doesn't contain
GFP_KERNEL, it tries to allocate from what's already available to
the allocator and a work item tries to keep the reserve around
certain level so that these atomic allocations usually succeed.
This will replace the ad-hoc percpu memory pool used by
blk-throttle and also be used by the planned blkcg support for
writeback IOs.
Please note that I noticed a bug in how @gfp is interpreted while
preparing this pull request and applied the fix 6ae833c7fe
("percpu: fix how @gfp is interpreted by the percpu allocator")
just now.
- percpu_ref now uses longs for percpu and global counters instead of
ints. It leads to more sparse packing of the percpu counters on
64bit machines but the overhead should be negligible and this
allows using percpu_ref for refcnting pages and in-memory objects
directly.
- The switching between percpu and single counter modes of a
percpu_ref is made independent of putting the base ref and a
percpu_ref can now optionally be initialized in single or killed
mode. This allows avoiding percpu shutdown latency for cases where
the refcounted objects may be synchronously created and destroyed
in rapid succession with only a fraction of them reaching fully
operational status (SCSI probing does this when combined with
blk-mq support). It's also planned to be used to implement forced
single mode to detect underflow more timely for debugging.
There's a separate branch percpu/for-3.18-consistent-ops which cleans
up the duplicate percpu accessors. That branch causes a number of
conflicts with s390 and other trees. I'll send a separate pull
request w/ resolutions once other branches are merged"
* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
percpu: fix how @gfp is interpreted by the percpu allocator
blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
percpu_ref: add PERCPU_REF_INIT_* flags
percpu_ref: decouple switching to percpu mode and reinit
percpu_ref: decouple switching to atomic mode and killing
percpu_ref: add PCPU_REF_DEAD
percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
percpu_ref: replace pcpu_ prefix with percpu_
percpu_ref: minor code and comment updates
percpu_ref: relocate percpu_ref_reinit()
Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
Revert "percpu: free percpu allocation info for uniprocessor system"
percpu-refcount: make percpu_ref based on longs instead of ints
percpu-refcount: improve WARN messages
percpu: fix locking regression in the failure path of pcpu_alloc()
percpu-refcount: add @gfp to percpu_ref_init()
proportions: add @gfp to init functions
percpu_counter: add @gfp to percpu_counter_init()
percpu_counter: make percpu_counters_lock irq-safe
...
Currently, a percpu_ref which is initialized with
PERPCU_REF_INIT_ATOMIC or switched to atomic mode via
switch_to_atomic() automatically reverts to percpu mode on the first
percpu_ref_reinit(). This makes the atomic mode difficult to use for
cases where a percpu_ref is used as a persistent on/off switch which
may be cycled multiple times.
This patch makes such atomic state sticky so that it survives through
kill/reinit cycles. After this patch, atomic state is cleared only by
an explicit percpu_ref_switch_to_percpu() call.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
With the recent addition of percpu_ref_reinit(), percpu_ref now can be
used as a persistent switch which can be turned on and off repeatedly
where turning off maps to killing the ref and waiting for it to drain;
however, there currently isn't a way to initialize a percpu_ref in its
off (killed and drained) state, which can be inconvenient for certain
persistent switch use cases.
Similarly, percpu_ref_switch_to_atomic/percpu() allow dynamic
selection of operation mode; however, currently a newly initialized
percpu_ref is always in percpu mode making it impossible to avoid the
latency overhead of switching to atomic mode.
This patch adds @flags to percpu_ref_init() and implements the
following flags.
* PERCPU_REF_INIT_ATOMIC : start ref in atomic mode
* PERCPU_REF_INIT_DEAD : start ref killed and drained
These flags should be able to serve the above two use cases.
v2: target_core_tpg.c conversion was missing. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
percpu_ref has treated the dropping of the base reference and
switching to atomic mode as an integral operation; however, there's
nothing inherent tying the two together.
The use cases for percpu_ref have been expanding continuously. While
the current init/kill/reinit/exit model can cover a lot, the coupling
of kill/reinit with atomic/percpu mode switching is turning out to be
too restrictive for use cases where many percpu_refs are created and
destroyed back-to-back with only some of them reaching extended
operation. The coupling also makes implementing always-atomic debug
mode difficult.
This patch separates out percpu mode switching into
percpu_ref_switch_to_percpu() and reimplements percpu_ref_reinit() on
top of it.
* DEAD still requires ATOMIC. A dead ref can't be switched to percpu
mode w/o going through reinit.
v2: __percpu_ref_switch_to_percpu() was missing static. Fixed.
Reported by Fengguang aka kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
