In the reference list builder, frame_num refers to FrameNumWrap
in the spec, which is the same as the pic_num for frame decoding.
The same applies for long_term_pic_num and long_term_frame_idx.
Sort all type of references by frame_num so the sort can be reused
for fields reflist were the sorting is done using frame_num instead.
In short, pic_num is never actually used for building reference
lists.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In preparation for adding field decoding support, convert the byte arrays
for reflist into array of struct v4l2_h264_reference. That struct will
allow us to mark which field of the reference picture is being referenced.
[hverkuil: top_field_order_cnt -> pic_order_count]
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Using an activation counter to decide when the enable or disable the
cec adapter is not the best approach and can lead to race conditions.
Change this to determining the current status of the adapter, and
enable or disable the adapter accordingly.
It now only needs to be called whenever there is a chance that the
state changes, and it can handle enabling/disabling monitoring as
well if needed.
This simplifies the code and it should be a more robust approach as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the physical address changes (i.e. becomes invalid, then valid again)
while the adapter is still claiming free logical addresses, then trigger
a reconfiguration since any claimed LAs may now be stale.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vb2 queue ownership is managed by the ioctl handler helpers
(vb2_ioctl_*). There are however use cases where drivers can benefit
from checking queue ownership, for instance when open-coding an ioctl
handler that needs to perform additional checks before calling the
corresponding vb2 operation.
Expose the vb2_queue_is_busy() function in the videobuf2-v4l2.h header,
and change its first argument to a struct vb2_queue pointer as the
function name implies it operates on a queue, not a video_device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add v4l2_subdev_get_fmt() helper function which implements
v4l2_subdev_pad_ops.get_fmt using active state. Subdev drivers that
support active state and do not need to do anything special in their
get_fmt op can use this helper directly for v4l2_subdev_pad_ops.get_fmt.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The V4L2 subdevs have managed without centralized locking for the state
(previously pad_config), as the try-state is supposedly safe (although I
believe two TRY ioctls for the same fd would race), and the
active-state, and its locking, is managed by the drivers internally.
We now have active-state in a centralized position, and need locking.
Strictly speaking the locking is only needed for new drivers that use
the new state, as the current drivers continue behaving as they used to.
However, active-state locking is complicated by the fact that currently
the real active-state of a subdev is split into multiple parts: the new
v4l2_subdev_state, subdev control state, and subdev's internal state.
In the future all these three states should be combined into one state
(the v4l2_subdev_state), and then a single lock for the state should be
sufficient.
But to solve the current split-state situation we need to share locks
between the three states. This is accomplished by using the same lock
management as the control handler does: we use a pointer to a mutex,
allowing the driver to override the default mutex. Thus the driver can
do e.g.:
sd->state_lock = sd->ctrl_handler->lock;
before calling v4l2_subdev_init_finalize(), resulting in sharing the
same lock between the states and the controls.
The locking model for active-state is such that any subdev op that gets
the state as a parameter expects the state to be already locked by the
caller, and expects the caller to release the lock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The subdev state is now used for both try and active cases. Rename
rename v4l2_subdev_get_try_* helpers to v4l2_subdev_get_pad_*.
Temporary wapper helper macros are added to keep the drivers using
v4l2_subdev_get_try_* compiling. The next step is to change the uses
in th drivers, and then drop the helpers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a new 'active_state' field to struct v4l2_subdev to which we can
store the active state of a subdev. This will place the subdev
configuration into a known place, allowing us to use the state directly
from the v4l2 framework, thus simplifying the drivers.
Also add functions v4l2_subdev_init_finalize() and
v4l2_subdev_cleanup(), which will allocate and free the active state.
The functions are named in a generic way so that they can be also used
for other subdev initialization work.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
v4l2_subdev_alloc_state() and v4l2_subdev_free_state() are not supposed
to be used by the drivers. However, we do have a few drivers that use
those at the moment, so we need to expose these functions for the time
being.
Prefix the functions with __ to mark the functions as internal.
At the same time, rename them to v4l2_subdev_state_alloc and
v4l2_subdev_state_free to match the style used for other functions like
video_device_alloc() and media_request_alloc().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.
Also update media_device_init() documentation: the dev field must be now
initialised before calling it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The bus_info or a similar field exists in a lot of structs, yet drivers
tend to set the value of that field by themselves in a determinable way.
Thus provide a helper for doing this. To be used in subsequent patches.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The documentation for media_device_init() had several references to
(struct) media_entity where it should have referred to struct media_device
instead. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove redundant kerneldoc documentation in mc-device.c. The functions are
already documented in media-device.h, where non-redundant documentation is
also moved.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
