Also convert it to return a bool since it's called from release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
This patch kills t_handle_lock transaction spinlock completely from
jbd2.
To explain the reasoning, currently there were three sites at which
this spinlock was used.
1. jbd2_journal_wait_updates()
a. Based on careful code review it can be seen that, we don't need this
lock here. This is since we wait for any currently ongoing updates
based on a atomic variable t_updates. And we anyway don't take any
t_handle_lock while in stop_this_handle().
i.e.
write_lock(&journal->j_state_lock()
jbd2_journal_wait_updates() stop_this_handle()
while (atomic_read(txn->t_updates) { |
DEFINE_WAIT(wait); |
prepare_to_wait(); |
if (atomic_read(txn->t_updates) if (atomic_dec_and_test(txn->t_updates))
write_unlock(&journal->j_state_lock);
schedule(); wake_up()
write_lock(&journal->j_state_lock);
finish_wait();
}
txn->t_state = T_COMMIT
write_unlock(&journal->j_state_lock);
b. Also note that between atomic_inc(&txn->t_updates) in
start_this_handle() and jbd2_journal_wait_updates(), the
synchronization happens via read_lock(journal->j_state_lock) in
start_this_handle();
2. jbd2_journal_extend()
a. jbd2_journal_extend() is called with the handle of each process from
task_struct. So no lock required in updating member fields of handle_t
b. For member fields of h_transaction, all updates happens only via
atomic APIs (which is also within read_lock()).
So, no need of this transaction spinlock.
3. update_t_max_wait()
Based on Jan suggestion, this can be carefully removed using atomic
cmpxchg API.
Note that there can be several processes which are waiting for a new
transaction to be allocated and started. For doing this only one
process will succeed in taking write_lock() and allocating a new txn.
After that all of the process will be updating the t_max_wait (max
transaction wait time). This can be done via below method w/o taking
any locks using atomic cmpxchg.
For more details refer [1]
new = get_new_val();
old = READ_ONCE(ptr->max_val);
while (old < new)
old = cmpxchg(&ptr->max_val, old, new);
[1]: https://lwn.net/Articles/849237/
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d89e599658b4a1f3893a48c6feded200073037fc.1644992076.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For the follow scenario:
1. jbd start commit transaction n
2. task A get new handle for transaction n+1
3. task A do some ineligible actions and mark FC_INELIGIBLE
4. jbd complete transaction n and clean FC_INELIGIBLE
5. task A call fsync
In this case fast commit will not fallback to full commit and
transaction n+1 also not handled by jbd.
Make ext4_fc_mark_ineligible() also record transaction tid for
latest ineligible case, when call ext4_fc_cleanup() check
current transaction tid, if small than latest ineligible tid
do not clear the EXT4_MF_FC_INELIGIBLE.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Suggested-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Link: https://lore.kernel.org/r/20220117093655.35160-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted. On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.
Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy(). This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.
Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.
Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current metadata buffer release logic in bdev_try_to_free_page() have
a lot of use-after-free issues when umount filesystem concurrently, and
it is difficult to fix directly because ext4 is the only user of
s_op->bdev_try_to_free_page callback and we may have to add more special
refcount or lock that is only used by ext4 into the common vfs layer,
which is unacceptable.
One better solution is remove the bdev_try_to_free_page callback, but
the real problem is we cannot easily release journal_head on the
checkpointed buffer, so try_to_free_buffers() cannot release buffers and
page under memory pressure, which is more likely to trigger
out-of-memory. So we cannot remove the callback directly before we find
another way to release journal_head.
This patch introduce a shrinker to free journal_head on the checkpointed
transaction. After the journal_head got freed, try_to_free_buffers()
could free buffer properly.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Although we merged c044f3d836 ("jbd2: abort journal if free a async
write error metadata buffer"), there is a race between
jbd2_journal_try_to_free_buffers() and jbd2_journal_destroy(), so the
jbd2_log_do_checkpoint() may still fail to detect the buffer write
io error flag which may lead to filesystem inconsistency.
jbd2_journal_try_to_free_buffers() ext4_put_super()
jbd2_journal_destroy()
__jbd2_journal_remove_checkpoint()
detect buffer write error jbd2_log_do_checkpoint()
jbd2_cleanup_journal_tail()
<--- lead to inconsistency
jbd2_journal_abort()
Fix this issue by introducing a new atomic flag which only have one
JBD2_CHECKPOINT_IO_ERROR bit now, and set it in
__jbd2_journal_remove_checkpoint() when freeing a checkpoint buffer
which has write_io_error flag. Then jbd2_journal_destroy() will detect
this mark and abort the journal to prevent updating log tail.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Building with 'make W=1' shows a harmless -Wempty-body warning:
fs/jbd2/recovery.c: In function 'fc_do_one_pass':
fs/jbd2/recovery.c:267:75: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
267 | jbd_debug(3, "Fast commit replay failed, err = %d\n", err);
| ^
Change the empty dprintk() macros to no_printk(), which avoids this
warning and adds format string checking.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210322102152.95684-1-arnd@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a helper to read number of fast commit blocks from jbd2 superblock
and also rename the JBD2_MIN_FC_BLKS to
JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the
default number of fast commit blocks to use in case number of fast
commit blocks isn't set in jbd2 superblock.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch removes jbd2_fc_init() API and its related functions to
simplify enabling fast commits. With this change, the number of fast
commit blocks to use is solely determined by the JBD2 layer. So, we
move the default value for minimum number of fast commit blocks from
ext4/fast_commit.h to include/linux/jbd2.h. However, whether or not to
use fast commits is determined by the file system. The file system
just sets the fast commit feature using
jbd2_journal_set_features(). JBD2 layer then determines how many
blocks to use for fast commits (based on the value found in the JBD2
superblock).
Note that the JBD2 feature flag of fast commits is just an indication
that there are fast commit blocks present on disk. It doesn't tell
JBD2 layer about the intent of the file system of whether to it wants
to use fast commit or not. That's why, we blindly clear the fast
commit flag in journal_reset() after the recovery is done.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The on-disk superblock field sb->s_maxlen represents the total size of
the journal including the fast commit area and is no more the max
number of blocks available for a transaction. The maximum number of
blocks available to a transaction is reduced by the number of fast
commit blocks. So, this patch renames j_maxlen to j_total_len to
better represent its intent. Also, it adds a function to calculate max
number of bufs available for a transaction.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
