Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.
nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.
netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.
We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for testing of HW stats support that was added recently, namely
the L3 stats support. L3 stats are provided for devices for which the L3
stats have been turned on, and that were enabled for netdevsim through a
debugfs toggle:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and
20pps of egress traffic. Similarly, L3 stats can be disabled for a given
device, and netdevsim ceases pretending there is any HW traffic going on:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex
Besides this, there is a third toggle to mark a device for future failure:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable
A future request to enable L3 stats on such netdevice will be bounced by
netdevsim:
# ip -j l sh dev d | jq '.[].ifindex'
66
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable
# ip stats set dev d l3_stats on
Error: netdevsim: Stats enablement set to fail.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename functions serving as driver entry points
from nsim_dev_... to nsim_drv_... this makes the
API boundary between bus and dev clearer.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
max_vfs is a strange little beast because the file
hangs off of nsim's debugfs, but it configures a field
in the bus device. Move it to dev.c, let's look at it
as if the device driver was imposing VF limit based
on FW info (like pci_sriov_set_totalvfs()).
Again, when moving refactor the function not to hold
the vfs lock pointlessly while parsing the input.
Wrap the access from the read side in READ_ONCE()
to appease concurrency checkers. Do not check if
return value from snprintf() is negative...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since "eswitch" configuration was added bus.c contains
a lot of device details which really belong to dev.c.
Restructure the code while moving it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When netdevsim got split into the faux bus vfconfig ended
up in the bus device (think pci_dev) which is strange because
it contains very networky not to say netdevy information.
Move it to nsim_dev, which is the driver "priv" structure
for the device.
To make sure we don't race with probe/remove take
the device lock (much like PCI).
While at it remove the NULL-checking of vfconfigs.
It appears to be pointless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For testing visibility of mq/mqprio default children.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't progress with adding and deleting ports as long as devlink
reload is running.
Fixes: 23809a726c ("netdevsim: Forbid devlink reload when adding or deleting ports")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently netdevsim only supports a single queue per port, which is
insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend
the current sysfs interface so that users can create ports with multiple
queues:
$ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device
As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port.
Note, this is compatible with the current interface, with default number
of queues set to 1. For example, echoing "2 4" creates 4 ports with 1
queue per port; echoing "2" simply creates 1 port with 1 queue.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_trap tests for the netdevsim fail due to misspelled
debugfs file name. Change this name, as well as name of callback
function, to match the naming as in the devlink itself - 'trap_drop_counter'.
Test-results:
selftests: drivers/net/netdevsim: devlink_trap.sh
TEST: Initialization [ OK ]
TEST: Trap action [ OK ]
TEST: Trap metadata [ OK ]
TEST: Non-existing trap [ OK ]
TEST: Non-existing trap action [ OK ]
TEST: Trap statistics [ OK ]
TEST: Trap group action [ OK ]
TEST: Non-existing trap group [ OK ]
TEST: Trap group statistics [ OK ]
TEST: Trap policer [ OK ]
TEST: Trap policer binding [ OK ]
TEST: Port delete [ OK ]
TEST: Device delete [ OK ]
Fixes: a7b3527a43 ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever query statistics is issued for trap with DROP action,
devlink subsystem would also fill-in statistics 'dropped' field.
In case if device driver did't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Add trap_drop_counter_get callback implementation to the netdevsim.
Add new test cases for netdevsim, to test both the callback
functionality, as well as drop statistics alteration check.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new devlink ops that allow setting rate node as a parent for
devlink port (leaf) or another devlink node through devlink API.
Expose parent names to netdevsim debugfs in read only mode.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new devlink ops that allow creation, deletion and setting of
shared/max tx rate of devlink rate nodes through devlink API.
Expose rate node and it's tx rates to netdevsim debugfs.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement callbacks to set/get eswitch mode value. Add helpers to check
current mode.
Instantiate VFs' net devices and devlink ports on switchdev enabling and
remove them on legacy enabling. Changing number of VFs while in
switchdev mode triggers VFs creation/deletion.
Also disable NDO API callback to set VF rate, since it's legacy API.
Switchdev API to set VF rate will be implemented in one of the next
patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define type of ports, which netdevsim driver currently operates with as
PF. Define new port type - VF, which will be implemented in following
patches. Add helper functions to distinguish them. Add helper function
to get VF index from port index.
Add port indexing logic where PFs' indexes starts from 0, VFs' - from
NSIM_DEV_VF_PORT_INDEX_BASE.
All ports uses same index pool, which means that PF port may be created
with index from VFs' indexes range.
Maximum number of VFs, which the driver can allocate, is limited by
UINT_MAX - BASE.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move VFs disabling from device release() to nsim_dev_reload_destroy() to
make VFs disabling and ports removal simultaneous.
This is a requirement for VFs ports implemented in next patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there is no limit to the number of VFs netdevsim can enable.
In a real systems this value exist and used by the driver.
Fore example, some features might need to consider this value when
allocating memory.
Expose max_vfs variable to debugfs as configurable resource. If are VFs
configured (num_vfs != 0) then changing of max_vfs not allowed.
Co-developed-by: Yuval Avnery <yuvalav@nvidia.com>
Signed-off-by: Yuval Avnery <yuvalav@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ethtool FEC and some ethtool error injection.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow netdevsim to report "sampled" packets to the psample module by
periodically generating packets from a work queue. The behavior can be
enabled / disabled (default) and the various meta data attributes can be
controlled via debugfs knobs.
This implementation enables both testing of the psample module with all
the optional attributes as well as development of user space
applications on top of psample such as hsflowd and a Wireshark dissector
for psample generic netlink packets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be
used to make netdevsim reject BPF programs from being accepted by the
verifier. If this toggle (which defaults to true) is set to false,
nsim_bpf_verify_insn() will return EOPNOTSUPP on the last
instruction (after outputting the 'Hello from netdevsim' verifier message).
This makes it possible to check the verification callback in the driver
from test_offload.py in selftests, since the verifier now clears the
verifier log on a successful load, hiding the message from the driver.
Fixes: 6f8a57ccf8 ("bpf: Make verifier log more relevant by default")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
Add ethtool ring and coalesce settings support for testing.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will help the refactoring in the next commit
when coalesce and ring settings are added.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
