Currently the number of deferred objects are per shrinker, but some
slabs, for example, vfs inode/dentry cache are per memcg, this would
result in poor isolation among memcgs.
The deferred objects typically are generated by __GFP_NOFS allocations,
one memcg with excessive __GFP_NOFS allocations may blow up deferred
objects, then other innocent memcgs may suffer from over shrink,
excessive reclaim latency, etc.
For example, two workloads run in memcgA and memcgB respectively,
workload in B is vfs heavy workload. Workload in A generates excessive
deferred objects, then B's vfs cache might be hit heavily (drop half of
caches) by B's limit reclaim or global reclaim.
We observed this hit in our production environment which was running vfs
heavy workload shown as the below tracing log:
<...>-409454 [016] .... 28286961.747146: mm_shrink_slab_start: super_cache_scan+0x0/0x1a0 ffff9a83046f3458:
nid: 1 objects to shrink 3641681686040 gfp_flags GFP_HIGHUSER_MOVABLE|__GFP_ZERO pgs_scanned 1 lru_pgs 15721
cache items 246404277 delta 31345 total_scan 123202138
<...>-409454 [022] .... 28287105.928018: mm_shrink_slab_end: super_cache_scan+0x0/0x1a0 ffff9a83046f3458:
nid: 1 unused scan count 3641681686040 new scan count 3641798379189 total_scan 602
last shrinker return val 123186855
The vfs cache and page cache ratio was 10:1 on this machine, and half of
caches were dropped. This also resulted in significant amount of page
caches were dropped due to inodes eviction.
Make nr_deferred per memcg for memcg aware shrinkers would solve the
unfairness and bring better isolation.
The following patch will add nr_deferred to parent memcg when memcg
offline. To preserve nr_deferred when reparenting memcgs to root, root
memcg needs shrinker_info allocated too.
When memcg is not enabled (!CONFIG_MEMCG or memcg disabled), the
shrinker's nr_deferred would be used. And non memcg aware shrinkers use
shrinker's nr_deferred all the time.
Link: https://lkml.kernel.org/r/20210311190845.9708-10-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged via the new APIs of obj_cgroup. The new
APIs introduce a struct obj_cgroup to charge slab objects. It prevents
long-living objects from pinning the original memory cgroup in the
memory. But there are still some corner objects (e.g. allocations
larger than order-1 page on SLUB) which are not charged via the new
APIs. Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.
We want to reuse the obj_cgroup APIs to charge the kmem pages. If we do
that, we should store an object cgroup pointer to page->memcg_data for
the kmem pages.
Finally, page->memcg_data will have 3 different meanings.
1) For the slab pages, page->memcg_data points to an object cgroups
vector.
2) For the kmem pages (exclude the slab pages), page->memcg_data
points to an object cgroup.
3) For the user pages (e.g. the LRU pages), page->memcg_data points
to a memory cgroup.
We do not change the behavior of page_memcg() and page_memcg_rcu(). They
are also suitable for LRU pages and kmem pages. Why?
Because memory allocations pinning memcgs for a long time - it exists at a
larger scale and is causing recurring problems in the real world: page
cache doesn't get reclaimed for a long time, or is used by the second,
third, fourth, ... instance of the same job that was restarted into a new
cgroup every time. Unreclaimable dying cgroups pile up, waste memory, and
make page reclaim very inefficient.
We can convert LRU pages and most other raw memcg pins to the objcg
direction to fix this problem, and then the page->memcg will always point
to an object cgroup pointer. At that time, LRU pages and kmem pages will
be treated the same. The implementation of page_memcg() will remove the
kmem page check.
This patch aims to charge the kmem pages by using the new APIs of
obj_cgroup. Finally, the page->memcg_data of the kmem page points to an
object cgroup. We can use the __page_objcg() to get the object cgroup
associated with a kmem page. Or we can use page_memcg() to get the memory
cgroup associated with a kmem page, but caller must ensure that the
returned memcg won't be released (e.g. acquire the rcu_read_lock or
css_set_lock).
Link: https://lkml.kernel.org/r/20210401030141.37061-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210319163821.20704-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
[songmuchun@bytedance.com: fix forget to obtain the ref to objcg in split_page_memcg]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the kernel adds the page, allocated for swapin, to the
swapcache before charging the page. This is fine but now we want a
per-memcg swapcache stat which is essential for folks who wants to
transparently migrate from cgroup v1's memsw to cgroup v2's memory and
swap counters. In addition charging a page before exposing it to other
parts of the kernel is a step in the right direction.
To correctly maintain the per-memcg swapcache stat, this patch has
adopted to charge the page before adding it to swapcache. One challenge
in this option is the failure case of add_to_swap_cache() on which we
need to undo the mem_cgroup_charge(). Specifically undoing
mem_cgroup_uncharge_swap() is not simple.
To resolve the issue, this patch decouples the charging for swapin pages
from mem_cgroup_charge(). Two new functions are introduced,
mem_cgroup_swapin_charge_page() for just charging the swapin page and
mem_cgroup_swapin_uncharge_swap() for uncharging the swap slot once the
page has been successfully added to the swapcache.
[shakeelb@google.com: set page->private before calling swap_readpage]
Link: https://lkml.kernel.org/r/20210318015959.2986837-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20210305212639.775498-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the memory controller's custom hierarchical stats code with the
generic rstat infrastructure provided by the cgroup core.
The current implementation does batched upward propagation from the
write side (i.e. as stats change). The per-cpu batches introduce an
error, which is multiplied by the number of subgroups in a tree. In
systems with many CPUs and sizable cgroup trees, the error can be large
enough to confuse users (e.g. 32 batch pages * 32 CPUs * 32 subgroups
results in an error of up to 128M per stat item). This can entirely
swallow allocation bursts inside a workload that the user is expecting
to see reflected in the statistics.
In the past, we've done read-side aggregation, where a memory.stat read
would have to walk the entire subtree and add up per-cpu counts. This
became problematic with lazily-freed cgroups: we could have large
subtrees where most cgroups were entirely idle. Hence the switch to
change-driven upward propagation. Unfortunately, it needed to trade
accuracy for speed due to the write side being so hot.
Rstat combines the best of both worlds: from the write side, it cheaply
maintains a queue of cgroups that have pending changes, so that the read
side can do selective tree aggregation. This way the reported stats
will always be precise and recent as can be, while the aggregation can
skip over potentially large numbers of idle cgroups.
The way rstat works is that it implements a tree for tracking cgroups
with pending local changes, as well as a flush function that walks the
tree upwards. The controller then drives this by 1) telling rstat when
a local cgroup stat changes (e.g. mod_memcg_state) and 2) when a flush
is required to get uptodate hierarchy stats for a given subtree (e.g.
when memory.stat is read). The controller also provides a flush
callback that is called during the rstat flush walk for each cgroup and
aggregates its local per-cpu counters and propagates them upwards.
This adds a second vmstats to struct mem_cgroup (MEMCG_NR_STAT +
NR_VM_EVENT_ITEMS) to track pending subtree deltas during upward
aggregation. It removes 3 words from the per-cpu data. It eliminates
memcg_exact_page_state(), since memcg_page_state() is now exact.
[akpm@linux-foundation.org: merge fix]
[hannes@cmpxchg.org: fix a sleep in atomic section problem]
Link: https://lkml.kernel.org/r/20210315234100.64307-1-hannes@cmpxchg.org
Link: https://lkml.kernel.org/r/20210209163304.77088-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page writeback doesn't hold a page reference, which allows truncate to
free a page the second PageWriteback is cleared. This used to require
special attention in test_clear_page_writeback(), where we had to be
careful not to rely on the unstable page->memcg binding and look up all
the necessary information before clearing the writeback flag.
Since commit 073861ed77 ("mm: fix VM_BUG_ON(PageTail) and
BUG_ON(PageWriteback)") test_clear_page_writeback() is called with an
explicit reference on the page, and this dance is no longer needed.
Use unlock_page_memcg() and dec_lruvec_page_state() directly.
This removes the last user of the lock_page_memcg() return value, change
it to void. Touch up the comments in there as well. This also removes
the last extern user of __unlock_page_memcg(), make it static. Further,
it removes the last user of dec_lruvec_state(), delete it, along with a
few other unused helpers.
Link: https://lkml.kernel.org/r/YCQbYAWg4nvBFL6h@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alloc_page_buffers() currently uses get_mem_cgroup_from_page() for
charging the buffers to the page owner, which does an rcu-protected
page->memcg lookup and acquires a reference. But buffer allocation has
the page lock held throughout, which pins the page to the memcg and
thereby the memcg - neither rcu nor holding an extra reference during the
allocation are necessary. Use a raw page_memcg() instead.
This was the last user of get_mem_cgroup_from_page(), delete it.
Link: https://lkml.kernel.org/r/20210209190126.97842-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In general it's unknown in advance if a slab page will contain accounted
objects or not. In order to avoid memory waste, an obj_cgroup vector is
allocated dynamically when a need to account of a new object arises. Such
approach is memory efficient, but requires an expensive cmpxchg() to set
up the memcg/objcgs pointer, because an allocation can race with a
different allocation on another cpu.
But in some common cases it's known for sure that a slab page will contain
accounted objects: if the page belongs to a slab cache with a SLAB_ACCOUNT
flag set. It includes such popular objects like vm_area_struct, anon_vma,
task_struct, etc.
In such cases we can pre-allocate the objcgs vector and simple assign it
to the page without any atomic operations, because at this early stage the
page is not visible to anyone else.
A very simplistic benchmark (allocating 10000000 64-bytes objects in a
row) shows ~15% win. In the real life it seems that most workloads are
not very sensitive to the speed of (accounted) slab allocations.
[guro@fb.com: open-code set_page_objcgs() and add some comments, by Johannes]
Link: https://lkml.kernel.org/r/20201113001926.GA2934489@carbon.dhcp.thefacebook.com
[akpm@linux-foundation.org: fix it for mm-slub-call-account_slab_page-after-slab-page-initialization-fix.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boot a CONFIG_MEMCG=y kernel with "cgroup_disabled=memory" and you are
met by a series of warnings from the VM_WARN_ON_ONCE_PAGE(!memcg, page)
recently added to the inline mem_cgroup_page_lruvec().
An earlier attempt to place that warning, in mem_cgroup_lruvec(), had
been careful to do so after weeding out the mem_cgroup_disabled() case;
but was itself invalid because of the mem_cgroup_lruvec(NULL, pgdat) in
clear_pgdat_congested() and age_active_anon().
Warning in mem_cgroup_page_lruvec() was once useful in detecting a KSM
charge bug, so may be worth keeping: but skip if mem_cgroup_disabled().
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101032056260.1093@eggly.anvils
Fixes: 9a1ac2288c ("mm/memcontrol:rewrite mem_cgroup_page_lruvec()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hui Su <sh_def@163.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
"More MM work: a memcg scalability improvememt"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/lru: revise the comments of lru_lock
mm/lru: introduce relock_page_lruvec()
mm/lru: replace pgdat lru_lock with lruvec lock
mm/swap.c: serialize memcg changes in pagevec_lru_move_fn
mm/compaction: do page isolation first in compaction
mm/lru: introduce TestClearPageLRU()
mm/mlock: remove __munlock_isolate_lru_page()
mm/mlock: remove lru_lock on TestClearPageMlocked
mm/vmscan: remove lruvec reget in move_pages_to_lru
mm/lru: move lock into lru_note_cost
mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn
mm/memcg: add debug checking in lock_page_memcg
mm: page_idle_get_page() does not need lru_lock
mm/rmap: stop store reordering issue on page->mapping
mm/vmscan: remove unnecessary lruvec adding
mm/thp: narrow lru locking
mm/thp: simplify lru_add_page_tail()
mm/thp: use head for head page in lru_add_page_tail()
mm/thp: move lru_add_page_tail() to huge_memory.c
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
Patch series "memcg: add pagetable comsumption to memory.stat", v2.
Many workloads consumes significant amount of memory in pagetables. One
specific use-case is the user space network driver which mmaps the
application memory to provide zero copy transfer. This driver can consume
a large amount memory in page tables. This patch series exposes the
pagetable comsumption for each memory cgroup.
This patch (of 2):
This does not change any functionality and only move the functions which
update the lruvec stats to vmstat.h from memcontrol.h. The main reason
for this patch is to be able to use these functions in the page table
contructor function which is defined in mm.h and we can not include the
memcontrol.h in that file. Also this is a better place for this interface
in general. The lruvec abstraction, while invented for memcg, isn't
specific to memcg at all.
Link: https://lkml.kernel.org/r/20201130212541.2781790-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
