Add support for HDMA NATIVE, as long the IP design has set
the compatible register map parameter-HDMA_NATIVE,
which allows compatibility for native HDMA register configuration.
The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
And the native HDMA registers are different from eDMA, so this patch
add support for HDMA NATIVE mode.
HDMA write and read channels operate independently to maximize
the performance of the HDMA read and write data transfer over
the link When you configure the HDMA with multiple read channels,
then it uses a round robin (RR) arbitration scheme to select
the next read channel to be serviced.The same applies when you
have multiple write channels.
The native HDMA driver also supports a maximum of 16 independent
channels (8 write + 8 read), which can run simultaneously.
Both SAR (Source Address Register) and DAR (Destination Address Register)
are aligned to byte.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-4-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dw_edma_core_ops structure contains a set of the operations:
device IRQ numbers getter, CPU/PCI address translation. Based on the
functions semantics the structure name "dw_edma_plat_ops" looks more
descriptive since indeed the operations are platform-specific. The
"dw_edma_core_ops" name shall be used for a structure with the IP-core
specific set of callbacks in order to abstract out DW eDMA and DW HDMA
setups. Such structure will be added in one of the next commit in the
framework of the set of changes adding the DW HDMA device support.
Anyway the renaming was necessary to distinguish two types of
the implementation callbacks:
1. DW eDMA/hDMA IP-core specific operations: device-specific CSR
setups in one or another aspect of the DMA-engine initialization.
2. DW eDMA/hDMA platform specific operations: the DMA device
environment configs like IRQs, address translation, etc.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-2-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Per [1], UDMA TR15 transactions may hang if ICNT0 is less than 64B
Work around is to set EOL flag is to 1 for ICNT0.
Since, there is no performance penalty / side effects of setting EOL
flag event ICNTO > 64B, just set the flag for all UDMAP TR15
descriptors.
[1] https://www.ti.com/lit/er/sprz455a/sprz455a.pdf
Errata doc for J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0
(Rev. A)
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
[j-choudhary@ti.com: minor cleanups]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20230323120107.27638-1-j-choudhary@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull dmaengine updates from Vinod Koul:
"A new driver, couple of device support and binding conversion along
with bunch of driver updates are the main features of this.
New hardware support:
- TI AM62Ax controller support
- Xilinx xdma driver
- Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller
Updates:
- Runtime pm support for at_xdmac driver
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml"
* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dmaengine: idma64: Update bytes_transferred field
dmaengine: imx-sdma: Set DMA channel to be private
dmaengine: dw: Move check for paused channel to dwc_get_residue()
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: idxd: Fix default allowed read buffers value in group
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: Simplify dmaenginem_async_device_register() function
dmaengine: use sysfs_emit() to instead of scnprintf()
dmaengine: Make an order in struct dma_device definition
dt-bindings: dma: cleanup examples - indentation, lowercase hex
dt-bindings: dma: drop unneeded quotes
dmaengine: xilinx: xdma: Add user logic interrupt support
dmaengine: xilinx: xdma: Add xilinx xdma driver
dmaengine: drivers: Use devm_platform_ioremap_resource()
dmaengine: at_xdmac: remove empty line
dmaengine: at_xdmac: add runtime pm support
dmaengine: at_xdmac: align properly function members
dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
dmaengine: sun6i: Set the maximum segment size
...
When CONFIG_DW_EDMA=m, dw_edma_probe() is built as a module. Previously
edma.h declared it as extern, but the implementation isn't available for
builtin callers. A subsequent commit will add calls from
dw_pcie_host_init() and dw_pcie_ep_init(), which can only be built-in.
Make it safe for such builtin callers to call dw_edma_probe() by using
IS_REACHABLE() to define a stub when CONFIG_DW_EDMA=m.
When CONFIG_DW_EDMA=m, these builtin callers will fail to detect and
register eDMA devices, so eDMA won't be usable even if the dw-edma module
is loaded.
[bhelgaas: split to separate patch, commit log]
Link: https://lore.kernel.org/r/20230113171409.30470-25-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Currently the DW eDMA driver only supports the linked lists memory
allocated locally with respect to the remote eDMA engine setup. It means
the linked lists will be accessible by the CPU via the MMIO space only. If
eDMA is embedded into the DW PCIe Root Ports or local Endpoints (which
support will be added in subsequent commits) the linked lists are supposed
to be allocated in the CPU memory. In that case the LL-entries can be
directly accessed, while the former case implies using the MMIO accessors
for that.
In order to have both cases supported by the driver, the dw_edma_region
descriptor should be fixed to contain the MMIO-backed and just memory-based
virtual addresses. The linked lists initialization procedure will use one
of them depending on the eDMA device nature. If the eDMA engine is embedded
into the local DW PCIe Root Port/Endpoint controllers, the list entries
will be directly accessed by referencing the corresponding structure
fields. Otherwise the MMIO accessors usage will be preserved.
Link: https://lore.kernel.org/r/20230113171409.30470-24-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Using an abstract number as the DW eDMA chip identifier isn't practical
because there can be more than one DW eDMA controller on the platform. Some
may be detected as the PCIe Endpoints, and others may be embedded in DW
PCIe Root Port/Endpoint controllers. An abstract number in, for instance,
the IRQ handlers list, doesn't give a notion regarding their reference to
the particular DMA controller.
To preserve the code simplicity and support multi-eDMA platforms, use the
parental device name to create the DW eDMA controller name.
Link: https://lore.kernel.org/r/20230113171409.30470-22-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Since 9575632052 ("dmaengine: make slave address physical"), the source
and destination addresses of the DMA slave device have been converted to
physical addresses in the CPU address space. It's the DMA device driver's
responsibility to convert them to the DMA bus address space. In case of the
DW eDMA device, the source or destination peripheral (slave) devices reside
in PCI bus space. Thus we need to perform the PCI Host/Endpoint windows-
based (i.e. DT "ranges" property) address translation; otherwise the eDMA
transactions won't work as expected (or can be even harmful) if the CPU and
PCI address spaces don't match.
Note 1: Even though the DMA interleaved template has both source and
destination addresses declared as dma_addr_t, only the CPU memory range
should be mapped to be seen by the DMA device since it's a subject of the
DMA getting towards the system side. The device part must not be mapped
since the slave device resides in the PCI bus space, which isn't affected
by IOMMUs or iATU translations. DW PCIe eDMA generates corresponding
MWr/MRd TLPs on its own.
Note 2: This functionality is mainly required for the remote eDMA setup
since the CPU address must be manually translated into the PCI bus space
before being written to LLI.{SAR,DAR}. If eDMA is embedded in the locally
accessible DW PCIe Root Port/Endpoint, software-based translation isn't
required since hardware will translate it via the Outbound iATU as long as
the DMA_BYPASS flag is cleared. If DMA_BYPASS is set or there is no
Outbound iATU entry that contains the SAR or DAR (for Read and Write
channel respectively), there won't be any translation performed but DMA
will proceed with the corresponding source/destination address as-is.
Link: https://lore.kernel.org/r/20230113171409.30470-8-Sergey.Semin@baikalelectronics.ru
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The dw_edma_region.paddr field should be a memory base address visible by
the DW eDMA controller. If the DMA engine is embedded in the DW PCIe
Host/Endpoint controller, the address should belong to the Local CPU/
Application memory. If eDMA is remotely accessible across the PCI bus via
PCI memory IOs, the address should be part of the PCI bus memory space.
The latter case hasn't been well covered in the corresponding glue-driver.
Since pci_dev.resource[] contains resources defined in the CPU memory
space, they need to be converted to the PCI bus address space. Convert the
LL, DT and CSRs PCI memory ranges with pci_bus_address().
In addition, extend the dw_edma_region.paddr field size. The field normally
contains a memory range base address to be set in the DW eDMA Linked-List
pointer register or as a base address of the Linked-List data buffer. In
accordance with [1] the LL range is supposed to be created in the Local
CPU/Application memory, but depending on the DW eDMA utilization the memory
can be created as a part of the PCI bus address space (as in the case of
the DW PCIe Endpoint prototype kit).
In the former case dw_edma_region.paddr should be a dma_addr_t, while in
the latter one it should be a pci_bus_addr_t. Since the corresponding CSRs
are always 64 bits wide, convert dw_edma_region.paddr to be u64, and let
the client make sure it has a valid address visible by the DW eDMA
controller. For instance, the DW eDMA PCIe glue-driver initializes the
field with addresses from the PCI bus memory space.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
v.5.40a, March 2019, p.1103
Link: https://lore.kernel.org/r/20230113171409.30470-4-Sergey.Semin@baikalelectronics.ru
Fixes: 41aaff2a2a ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The hdmi script already supported in sdma firmware. So add support hdmi
in sdma driver.
The design of hdmi script is different from common script such as sai.
There is no need to config buffer descriptor for HDMI. The cyclic
capability is achieved by the hdmi script. The slave config is so simple,
only config src_addr, dts_addr and direction DMA_TRANS_NONE.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221115093823.2879128-3-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
The peripheral may have several FIFOs, but some case just select
some FIFOs from them for data transfer, which means FIFO0 and FIFO2
may be selected. So add FIFO address stride support, 0 means all FIFOs
are continuous, 1 means 1 word stride between FIFOs. All stride between
FIFOs should be same.
Another option words_per_fifo means how many audio channel data copied
to one FIFO one time, 1 means one channel per FIFO, 2 means 2 channels
per FIFO.
If 'n_fifos_src = 4' and 'words_per_fifo = 2', it means the first two
words(channels) fetch from FIFO0 and then jump to FIFO1 for next two words,
and so on after the last FIFO3 fetched, roll back to FIFO0.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657162829-9273-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that
is used by the eDMA core internally and should not be touched by the eDMA
controller drivers themselves. But currently, the eDMA controller drivers
like "dw-edma-pci" allocate and populate this internal structure before
passing it on to the eDMA core. The eDMA core further populates the
structure and uses it. This is wrong!
Hence, move all the "struct dw_edma" specifics from controller drivers to
the eDMA core.
Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
The i.MX SDMA engine can read from / write to multiple successive
hardware FIFO registers, referred to as "Multi FIFO support". This is
needed for the micfil driver and certain configurations of the SAI
driver. This patch adds support for this feature.
The number of FIFOs to read from / write to must be communicated from
the client driver to the SDMA engine. For this the struct
dma_slave_config::peripheral_config field is used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220414162249.3934543-12-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The display driver wants to pass a custom flag to the DMA engine driver,
which it started doing by using the slave_id field that was traditionally
used for a different purpose.
As there is no longer a correct use for the slave_id field, it should
really be removed, and the remaining users changed over to something
different.
The new mechanism for passing nonstandard settings is using the
.peripheral_config field, so use that to pass a newly defined structure
here, making it clear that this will not work in portable drivers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-10-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The slave_id was previously used to pick one DMA slave instead of another,
but this is now done through the DMA descriptors in device tree.
For the qcom_adm driver, the configuration is documented in the DT
binding to contain a tuple of device identifier and a "crci" field,
but the implementation ends up using only a single cell for identifying
the slave, with the crci getting passed in nonstandard properties of
the device, and passed through the dma driver using the old slave_id
field. Part of the problem apparently is that the nand driver ends up
using only a single DMA request ID, but requires distinct values for
"crci" depending on the type of transfer.
Change both the dmaengine driver and the two slave drivers to allow
the documented binding to work in addition to the ad-hoc passing
of crci values. In order to no longer abuse the slave_id field, pass
the data using the "peripheral_config" mechanism instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
