[ Upstream commit db10cb9b574675402bfd8fe1a31aafdd45b002df ]
CONFIG_DEBUG_SG highlights that get_{report,ext_report,derived_key)()}
are passing stack buffers as the @req_buf argument to
handle_guest_request(), generating a Call Trace of the following form:
WARNING: CPU: 0 PID: 1175 at include/linux/scatterlist.h:187 enc_dec_message+0x518/0x5b0 [sev_guest]
[..]
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:enc_dec_message+0x518/0x5b0 [sev_guest]
Call Trace:
<TASK>
[..]
handle_guest_request+0x135/0x520 [sev_guest]
get_ext_report+0x1ec/0x3e0 [sev_guest]
snp_guest_ioctl+0x157/0x200 [sev_guest]
Note that the above Call Trace was with the DEBUG_SG BUG_ON()s converted
to WARN_ON()s.
This is benign as long as there are no hardware crypto accelerators
loaded for the aead cipher, and no subsequent dma_map_sg() is performed
on the scatterlist. However, sev-guest can not assume the presence of
an aead accelerator nor can it assume that CONFIG_DEBUG_SG is disabled.
Resolve this bug by allocating virt_addr_valid() memory, similar to the
other buffers am @snp_dev instance carries, to marshal requests from
user buffers to kernel buffers.
Reported-by: Peter Gonda <pgonda@google.com>
Closes: http://lore.kernel.org/r/CAMkAt6r2VPPMZ__SQfJse8qWsUyYW3AgYbOUVM0S_Vtk=KvkxQ@mail.gmail.com
Fixes: fce96cf044 ("virt: Add SEV-SNP guest driver")
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
This driver fails to link when CRYPTO is disabled, or in a loadable
module:
WARNING: unmet direct dependencies detected for CRYPTO_GCM
WARNING: unmet direct dependencies detected for CRYPTO_AEAD2
Depends on [m]: CRYPTO [=m]
Selected by [y]:
- SEV_GUEST [=y] && VIRT_DRIVERS [=y] && AMD_MEM_ENCRYPT [=y]
x86_64-linux-ld: crypto/aead.o: in function `crypto_register_aeads':
Fixes: fce96cf044 ("virt: Add SEV-SNP guest driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230117171416.2715125-1-arnd@kernel.org
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Fei Li <fei1.li@intel.com>
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Link: https://lore.kernel.org/r/20230310144731.1546259-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
The encryption algorithms read and write directly to shared unencrypted
memory, which may leak information as well as permit the host to tamper
with the message integrity. Instead, copy whole messages in or out as
needed before doing any computation on them.
Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-3-dionnaglaze@google.com
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.
Therefore, the host is permitted and encouraged to throttle such guest
requests.
Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.
Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.
This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.
To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.
So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.
For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.
[ bp:
- Rewrite commit message and do a simplified version.
- The stable tags are supposed to denote that a cleanup should go
upfront before backporting this so that any future fixes to this
can preserve the sanity of the backporter(s). ]
Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff7 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab82374 (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274b ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c8 ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc6 ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.
While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.
[ Tom: check override_err instead of err. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
Pull x86 sev updates from Borislav Petkov:
- Two minor fixes to the sev-guest driver
* tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Add a MODULE_ALIAS
virt/sev-guest: Remove unnecessary free in init_crypto()
Pull x86 tdx updates from Dave Hansen:
"This includes a single chunk of new functionality for TDX guests which
allows them to talk to the trusted TDX module software and obtain an
attestation report.
This report can then be used to prove the trustworthiness of the guest
to a third party and get access to things like storage encryption
keys"
* tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/tdx: Test TDX attestation GetReport support
virt: Add TDX guest driver
x86/tdx: Add a wrapper to get TDREPORT0 from the TDX Module
The AMD Secure Processor (ASP) and an SNP guest use a series of
AES-GCM keys called VMPCKs to communicate securely with each other.
The IV to this scheme is a sequence number that both the ASP and the
guest track.
Currently, this sequence number in a guest request must exactly match
the sequence number tracked by the ASP. This means that if the guest
sees an error from the host during a request it can only retry that
exact request or disable the VMPCK to prevent an IV reuse. AES-GCM
cannot tolerate IV reuse, see: "Authentication Failures in NIST version
of GCM" - Antoine Joux et al.
In order to address this, make handle_guest_request() delete the VMPCK
on any non successful return. To allow userspace querying the cert_data
length make handle_guest_request() save the number of pages required by
the host, then have handle_guest_request() retry the request without
requesting the extended data, then return the number of pages required
back to userspace.
[ bp: Massage, incorporate Tom's review comments. ]
Fixes: fce96cf044 ("virt: Add SEV-SNP guest driver")
Reported-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221116175558.2373112-1-pgonda@google.com
TDX guest driver exposes IOCTL interfaces to service TDX guest
user-specific requests. Currently, it is only used to allow the user to
get the TDREPORT to support TDX attestation.
Details about the TDX attestation process are documented in
Documentation/x86/tdx.rst, and the IOCTL details are documented in
Documentation/virt/coco/tdx-guest.rst.
Operations like getting TDREPORT involves sending a blob of data as
input and getting another blob of data as output. It was considered
to use a sysfs interface for this, but it doesn't fit well into the
standard sysfs model for configuring values. It would be possible to
do read/write on files, but it would need multiple file descriptors,
which would be somewhat messy. IOCTLs seem to be the best fitting
and simplest model for this use case. The AMD sev-guest driver also
uses the IOCTL interface to support attestation.
[Bagas Sanjaya: Ack is for documentation portion]
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/all/20221116223820.819090-3-sathyanarayanan.kuppuswamy%40linux.intel.com
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
