Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
The performance of bpf_redirect() is now roughly the same as that of
bpf_redirect_map(). However, David Ahern pointed out that the header file
has not been updated to reflect this, and still says that a significant
performance increase is possible when using bpf_redirect_map(). Remove this
text from the bpf_redirect_map() description, and reword the description in
bpf_redirect() slightly. Also fix the 'Return' section of the
bpf_redirect_map() documentation.
Fixes: 1d233886dd ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200218130334.29889-1-toke@redhat.com
To pick up the changes from:
7de3f1423f ("KVM: s390: Add new reset vcpu API")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
$ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
e933adde6f ("fscrypt: include <linux/ioctl.h> in UAPI header")
93edd392ca ("fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
769071ac9f ("ns: Introduce Time Namespace")
Silencing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Which enables 'perf trace' to decode the CLONE_NEWTIME bit in the
'flags' argument to the clone syscalls.
Example of clone flags being decoded:
[root@quaco ~]# perf trace -e clone*
0.000 qemu-system-x8/23923 clone(clone_flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, newsp: 0x7f0dad7f9870, parent_tidptr: 0x7f0dad7fa9d0, child_tidptr: 0x7f0dad7fa9d0, tls: 0x7f0dad7fa700) = 6806 (qemu-system-x86)
? qemu-system-x8/6806 ... [continued]: clone()) = 0
^C[root@quaco ~]#
At some point this should enable things like:
# perf trace -e 'clone*/clone_flags&NEWTIME/'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
fddb5d430a ("open: introduce openat2(2) syscall")
9a2cef09c8 ("arch: wire up pidfd_getfd syscall")
We also need to grab a copy of uapi/linux/openat2.h since it is now
needed by fcntl.h, add it to tools/perf/check_headers.h.
$ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
--- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2019-12-20 16:43:57.662429958 -0300
+++ arch/x86/entry/syscalls/syscall_64.tbl 2020-02-10 16:36:22.070012468 -0300
@@ -357,6 +357,8 @@
433 common fspick __x64_sys_fspick
434 common pidfd_open __x64_sys_pidfd_open
435 common clone3 __x64_sys_clone3/ptregs
+437 common openat2 __x64_sys_openat2
+438 common pidfd_getfd __x64_sys_pidfd_getfd
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
Update tools/'s copy of that file:
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
See the result:
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2020-02-10 16:42:59.010636041 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2020-02-10 16:43:24.149958337 -0300
@@ -346,5 +346,7 @@
[433] = "fspick",
[434] = "pidfd_open",
[435] = "clone3",
+ [437] = "openat2",
+ [438] = "pidfd_getfd",
};
-#define SYSCALLTBL_x86_64_MAX_ID 435
+#define SYSCALLTBL_x86_64_MAX_ID 438
$
Now one can use:
perf trace -e openat2,pidfd_getfd
To get just those syscalls or use in things like:
perf trace -e open*
To get all the open variant (open, openat, openat2, etc) or:
perf trace pidfd*
To get the pidfd syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add minimal support for program extensions. bpf_object_open_opts() needs to be
called with attach_prog_fd = target_prog_fd and BPF program extension needs to
have in .c file section definition like SEC("freplace/func_to_be_replaced").
libbpf will search for "func_to_be_replaced" in the target_prog_fd's BTF and
will pass it in attach_btf_id to the kernel. This approach works for tests, but
more compex use case may need to request function name (and attach_btf_id that
kernel sees) to be more dynamic. Such API will be added in future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-3-ast@kernel.org
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
added helper bpf_send_signal() which permits bpf program to
send a signal to the current process. The signal may be
delivered to any threads in the process.
We found a use case where sending the signal to the current
thread is more preferable.
- A bpf program will collect the stack trace and then
send signal to the user application.
- The user application will add some thread specific
information to the just collected stack trace for
later analysis.
If bpf_send_signal() is used, user application will need
to check whether the thread receiving the signal matches
the thread collecting the stack by checking thread id.
If not, it will need to send signal to another thread
through pthread_kill().
This patch proposed a new helper bpf_send_signal_thread(),
which sends the signal to the thread corresponding to
the current kernel task. This way, user space is guaranteed that
bpf_program execution context and user space signal handling
context are the same thread.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035002.602336-1-yhs@fb.com
This patch introduces the macsec_context structure. It will be used
in the kernel to exchange information between the common MACsec
implementation (macsec.c) and the MACsec hardware offloading
implementations. This structure contains pointers to MACsec specific
structures which contain the actual MACsec configuration, and to the
underlying device (phydev for now).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To open a MPTCP socket with socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP),
IPPROTO_MPTCP needs a value that differs from IPPROTO_TCP. The existing
IPPROTO numbers mostly map directly to IANA-specified protocol numbers.
MPTCP does not have a protocol number allocated because MPTCP packets
use the TCP protocol number. Use private number not used OTA.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document BPF_F_QUERY_EFFECTIVE flag, mostly to clarify how it affects
attach_flags what may not be obvious and what may lead to confision.
Specifically attach_flags is returned only for target_fd but if programs
are inherited from an ancestor cgroup then returned attach_flags for
current cgroup may be confusing. For example, two effective programs of
same attach_type can be returned but w/o BPF_F_ALLOW_MULTI in
attach_flags.
Simple repro:
# bpftool c s /sys/fs/cgroup/path/to/task
ID AttachType AttachFlags Name
# bpftool c s /sys/fs/cgroup/path/to/task effective
ID AttachType AttachFlags Name
95043 ingress tw_ipt_ingress
95048 ingress tw_ingress
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200108014006.938363-1-rdna@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8b ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f80 ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b16
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b16
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b16
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b16
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b8 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The common use-case in production is to have multiple cgroup-bpf
programs per attach type that cover multiple use-cases. Such programs
are attached with BPF_F_ALLOW_MULTI and can be maintained by different
people.
Order of programs usually matters, for example imagine two egress
programs: the first one drops packets and the second one counts packets.
If they're swapped the result of counting program will be different.
It brings operational challenges with updating cgroup-bpf program(s)
attached with BPF_F_ALLOW_MULTI since there is no way to replace a
program:
* One way to update is to detach all programs first and then attach the
new version(s) again in the right order. This introduces an
interruption in the work a program is doing and may not be acceptable
(e.g. if it's egress firewall);
* Another way is attach the new version of a program first and only then
detach the old version. This introduces the time interval when two
versions of same program are working, what may not be acceptable if a
program is not idempotent. It also imposes additional burden on
program developers to make sure that two versions of their program can
co-exist.
Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH
command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI
flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag
and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to
replace
That way user can replace any program among those attached with
BPF_F_ALLOW_MULTI flag without the problems described above.
Details of the new API:
* If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid
descriptor of BPF program, BPF_PROG_ATTACH will return corresponding
error (EINVAL or EBADF).
* If replace_bpf_fd has valid descriptor of BPF program but such a
program is not attached to specified cgroup, BPF_PROG_ATTACH will
return ENOENT.
BPF_F_REPLACE is introduced to make the user intent clear, since
replace_bpf_fd alone can't be used for this (its default value, 0, is a
valid fd). BPF_F_REPLACE also makes it possible to extend the API in the
future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Narkyiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
Add support for extern variables, provided to BPF program by libbpf. Currently
the following extern variables are supported:
- LINUX_KERNEL_VERSION; version of a kernel in which BPF program is
executing, follows KERNEL_VERSION() macro convention, can be 4- and 8-byte
long;
- CONFIG_xxx values; a set of values of actual kernel config. Tristate,
boolean, strings, and integer values are supported.
Set of possible values is determined by declared type of extern variable.
Supported types of variables are:
- Tristate values. Are represented as `enum libbpf_tristate`. Accepted values
are **strictly** 'y', 'n', or 'm', which are represented as TRI_YES, TRI_NO,
or TRI_MODULE, respectively.
- Boolean values. Are represented as bool (_Bool) types. Accepted values are
'y' and 'n' only, turning into true/false values, respectively.
- Single-character values. Can be used both as a substritute for
bool/tristate, or as a small-range integer:
- 'y'/'n'/'m' are represented as is, as characters 'y', 'n', or 'm';
- integers in a range [-128, 127] or [0, 255] (depending on signedness of
char in target architecture) are recognized and represented with
respective values of char type.
- Strings. String values are declared as fixed-length char arrays. String of
up to that length will be accepted and put in first N bytes of char array,
with the rest of bytes zeroed out. If config string value is longer than
space alloted, it will be truncated and warning message emitted. Char array
is always zero terminated. String literals in config have to be enclosed in
double quotes, just like C-style string literals.
- Integers. 8-, 16-, 32-, and 64-bit integers are supported, both signed and
unsigned variants. Libbpf enforces parsed config value to be in the
supported range of corresponding integer type. Integers values in config can
be:
- decimal integers, with optional + and - signs;
- hexadecimal integers, prefixed with 0x or 0X;
- octal integers, starting with 0.
Config file itself is searched in /boot/config-$(uname -r) location with
fallback to /proc/config.gz, unless config path is specified explicitly
through bpf_object_open_opts' kernel_config_path option. Both gzipped and
plain text formats are supported. Libbpf adds explicit dependency on zlib
because of this, but this shouldn't be a problem, given libelf already depends
on zlib.
All detected extern variables, are put into a separate .extern internal map.
It, similarly to .rodata map, is marked as read-only from BPF program side, as
well as is frozen on load. This allows BPF verifier to track extern values as
constants and perform enhanced branch prediction and dead code elimination.
This can be relied upon for doing kernel version/feature detection and using
potentially unsupported field relocations or BPF helpers in a CO-RE-based BPF
program, while still having a single version of BPF program running on old and
new kernels. Selftests are validating this explicitly for unexisting BPF
helper.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-3-andriin@fb.com
To pick up the changes from:
22945688ac ("KVM: PPC: Book3S HV: Support reset of secure guest")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Link: https://lkml.kernel.org/n/tip-bdbe4x02johhul05a03o27zj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
0acefef584 ("Merge tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux")
49cb2fc42c ("fork: extend clone3() to support setting a PID")
fa729c4df5 ("clone3: validate stack arguments")
b612e5df45 ("clone3: add CLONE_CLEAR_SIGHAND")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.
The CLONE_CLEAR_SIGHAND one will be used in tools/perf/trace/beauty/clone.c
in a followup patch to show that string when this bit is set in the
syscall arg. Keeping a copy of this file allows us to build this in
older systems and have the binary support printing that flag whenever
that system gets its kernel updated to one where this feature is
present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nprqsvvzbhzoy64cbvos6c5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
14edff8831 Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
a4b28f5c67 Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into kvmarm-master/next
58772e9a3d ("KVM: arm64: Provide VCPU attributes for stolen time")
da345174ce ("KVM: arm/arm64: Allow user injection of external data aborts")
c726200dd1 ("KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace")
efe5ddcae4 ("KVM: PPC: Book3S HV: XIVE: Allow userspace to set the # of VPs")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
Some are also include by:
tools/perf/arch/x86/util/kvm-stat.c
tools/perf/arch/powerpc/util/kvm-stat.c
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steven Price <steven.price@arm.com>
Link: https://lkml.kernel.org/n/tip-qrjdudhq25mk5bfnhveofbm4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
3ad2522c64 ("statx: define STATX_ATTR_VERITY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h'
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
At some point we wi'll beautify structs passed in pointers to syscalls
and then we'll need to have tables for these defines, for now update the
file to silence the warning as this file is used for doing this type of
number -> string translations for other defines found in these file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-thcy60dpry5qrpn7nmc58bwg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
