Commit Graph

35 Commits

Author SHA1 Message Date
Taehee Yoo
f592f80483 bpf: devmap: fix wrong interface selection in notifier_call
The dev_map_notification() removes interface in devmap if
unregistering interface's ifindex is same.
But only checking ifindex is not enough because other netns can have
same ifindex. so that wrong interface selection could occurred.
Hence netdev pointer comparison code is added.

v2: compare netdev pointer instead of using net_eq() (Daniel Borkmann)
v1: Initial patch

Fixes: 2ddf71e23c ("net: add notifier hooks for devmap bpf map")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-26 00:32:21 +02:00
Daniel Borkmann
f6069b9aa9 bpf: fix redirect to map under tail calls
Commits 109980b894 ("bpf: don't select potentially stale ri->map
from buggy xdp progs") and 7c30013133 ("bpf: fix ri->map_owner
pointer on bpf_prog_realloc") tried to mitigate that buggy programs
using bpf_redirect_map() helper call do not leave stale maps behind.
Idea was to add a map_owner cookie into the per CPU struct redirect_info
which was set to prog->aux by the prog making the helper call as a
proof that the map is not stale since the prog is implicitly holding
a reference to it. This owner cookie could later on get compared with
the program calling into BPF whether they match and therefore the
redirect could proceed with processing the map safely.

In (obvious) hindsight, this approach breaks down when tail calls are
involved since the original caller's prog->aux pointer does not have
to match the one from one of the progs out of the tail call chain,
and therefore the xdp buffer will be dropped instead of redirected.
A way around that would be to fix the issue differently (which also
allows to remove related work in fast path at the same time): once
the life-time of a redirect map has come to its end we use it's map
free callback where we need to wait on synchronize_rcu() for current
outstanding xdp buffers and remove such a map pointer from the
redirect info if found to be present. At that time no program is
using this map anymore so we simply invalidate the map pointers to
NULL iff they previously pointed to that instance while making sure
that the redirect path only reads out the map once.

Fixes: 97f91a7cf0 ("bpf: add bpf_redirect_map helper routine")
Fixes: 109980b894 ("bpf: don't select potentially stale ri->map from buggy xdp progs")
Reported-by: Sebastiano Miano <sebastiano.miano@polito.it>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-17 15:56:23 -07:00
David S. Miller
c1617fb4c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-13

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add driver XDP support for veth. This can be used in conjunction with
   redirect of another XDP program e.g. sitting on NIC so the xdp_frame
   can be forwarded to the peer veth directly without modification,
   from Toshiaki.

2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
   in order to provide more control and visibility on where a SO_REUSEPORT
   sk should be located, and the latter enables to directly select a sk
   from the bpf map. This also enables map-in-map for application migration
   use cases, from Martin.

3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
   of cgroup v2 that is the ancestor of the cgroup associated with the
   skb at the ancestor_level, from Andrey.

4) Implement BPF fs map pretty-print support based on BTF data for regular
   hash table and LRU map, from Yonghong.

5) Decouple the ability to attach BTF for a map from the key and value
   pretty-printer in BPF fs, and enable further support of BTF for maps for
   percpu and LPM trie, from Daniel.

6) Implement a better BPF sample of using XDP's CPU redirect feature for
   load balancing SKB processing to remote CPU. The sample implements the
   same XDP load balancing as Suricata does which is symmetric hash based
   on IP and L4 protocol, from Jesper.

7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
   critical path as it is ensured that the allocator is present, from Björn.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13 10:07:23 -07:00
Daniel Borkmann
e8d2bec045 bpf: decouple btf from seq bpf fs dump and enable more maps
Commit a26ca7c982 ("bpf: btf: Add pretty print support to
the basic arraymap") and 699c86d6ec ("bpf: btf: add pretty
print for hash/lru_hash maps") enabled support for BTF and
dumping via BPF fs for array and hash/lru map. However, both
can be decoupled from each other such that regular BPF maps
can be supported for attaching BTF key/value information,
while not all maps necessarily need to dump via map_seq_show_elem()
callback.

The basic sanity check which is a prerequisite for all maps
is that key/value size has to match in any case, and some maps
can have extra checks via map_check_btf() callback, e.g.
probing certain types or indicating no support in general. With
that we can also enable retrieving BTF info for per-cpu map
types and lpm.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
2018-08-13 00:52:45 +02:00
Jesper Dangaard Brouer
1bf9116d08 xdp: fix bug in devmap teardown code path
Like cpumap teardown, the devmap teardown code also flush remaining
xdp_frames, via bq_xmit_all() in case map entry is removed.  The code
can call xdp_return_frame_rx_napi, from the the wrong context, in-case
ndo_xdp_xmit() fails.

Fixes: 389ab7f01a ("xdp: introduce xdp_return_frame_rx_napi")
Fixes: 735fc4054b ("xdp: change ndo_xdp_xmit API to support bulking")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-09 21:50:44 +02:00
Toshiaki Makita
d8d7218ad8 xdp: XDP_REDIRECT should check IFF_UP and MTU
Otherwise we end up with attempting to send packets from down devices
or to send oversized packets, which may cause unexpected driver/device
behaviour. Generic XDP has already done this check, so reuse the logic
in native XDP.

Fixes: 814abfabef ("xdp: add bpf_redirect helper function")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-07 15:25:35 -07:00
Toshiaki Makita
6d5fc19579 xdp: Fix handling of devmap in generic XDP
Commit 67f29e07e1 ("bpf: devmap introduce dev_map_enqueue") changed
the return value type of __devmap_lookup_elem() from struct net_device *
to struct bpf_dtab_netdev * but forgot to modify generic XDP code
accordingly.

Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct
net_device is expected, then skb->dev was set to invalid value.

v2:
- Fix compiler warning without CONFIG_BPF_SYSCALL.

Fixes: 67f29e07e1 ("bpf: devmap introduce dev_map_enqueue")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-15 23:47:15 +02:00
Jesper Dangaard Brouer
c1ece6b245 bpf/xdp: devmap can avoid calling ndo_xdp_flush
The XDP_REDIRECT map devmap can avoid using ndo_xdp_flush, by instead
instructing ndo_xdp_xmit to flush via XDP_XMIT_FLUSH flag in
appropriate places.

Notice after this patch it is possible to remove ndo_xdp_flush
completely, as this is the last user of ndo_xdp_flush. This is left
for later patches, to keep driver changes separate.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03 08:11:35 -07:00
Jesper Dangaard Brouer
42b3346898 xdp: add flags argument to ndo_xdp_xmit API
This patch only change the API and reject any use of flags. This is an
intermediate step that allows us to implement the flush flag operation
later, for each individual driver in a separate patch.

The plan is to implement flush operation via XDP_XMIT_FLUSH flag
and then remove XDP_XMIT_FLAGS_NONE when done.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03 08:11:34 -07:00
Colin Ian King
71b2c87df3 bpf: devmap: remove redundant assignment of dev = dev
The assignment dev = dev is redundant and should be removed.

Detected by CoverityScan, CID#1469486 ("Evaluation order violation")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-30 14:02:48 -07:00
Jesper Dangaard Brouer
e74de52e55 xdp/trace: extend tracepoint in devmap with an err
Extending tracepoint xdp:xdp_devmap_xmit in devmap with an err code
allow people to easier identify the reason behind the ndo_xdp_xmit
call to a given driver is failing.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
735fc4054b xdp: change ndo_xdp_xmit API to support bulking
This patch change the API for ndo_xdp_xmit to support bulking
xdp_frames.

When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown.
Most of the slowdown is caused by DMA API indirect function calls, but
also the net_device->ndo_xdp_xmit() call.

Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with
single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed
performance improved:
 for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps
 for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps

With frames avail as a bulk inside the driver ndo_xdp_xmit call,
further optimizations are possible, like bulk DMA-mapping for TX.

Testing without CONFIG_RETPOLINE show the same performance for
physical NIC drivers.

The virtual NIC driver tun sees a huge performance boost, as it can
avoid doing per frame producer locking, but instead amortize the
locking cost over the bulk.

V2: Fix compile errors reported by kbuild test robot <lkp@intel.com>
V4: Isolated ndo, driver changes and callers.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
389ab7f01a xdp: introduce xdp_return_frame_rx_napi
When sending an xdp_frame through xdp_do_redirect call, then error
cases can happen where the xdp_frame needs to be dropped, and
returning an -errno code isn't sufficient/possible any-longer
(e.g. for cpumap case). This is already fully supported, by simply
calling xdp_return_frame.

This patch is an optimization, which provides xdp_return_frame_rx_napi,
which is a faster variant for these error cases.  It take advantage of
the protection provided by XDP RX running under NAPI protection.

This change is mostly relevant for drivers using the page_pool
allocator as it can take advantage of this. (Tested with mlx5).

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
38edddb811 xdp: add tracepoint for devmap like cpumap have
Notice how this allow us get XDP statistic without affecting the XDP
performance, as tracepoint is no-longer activated on a per packet basis.

V5: Spotted by John Fastabend.
 Fix 'sent' also counted 'drops' in this patch, a later patch corrected
 this, but it was a mistake in this intermediate step.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer
5d053f9da4 bpf: devmap prepare xdp frames for bulking
Like cpumap create queue for xdp frames that will be bulked.  For now,
this patch simply invoke ndo_xdp_xmit foreach frame.  This happens,
either when the map flush operation is envoked, or when the limit
DEV_MAP_BULK_SIZE is reached.

V5: Avoid memleak on error path in dev_map_update_elem()

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:14 -07:00
Jesper Dangaard Brouer
67f29e07e1 bpf: devmap introduce dev_map_enqueue
Functionality is the same, but the ndo_xdp_xmit call is now
simply invoked from inside the devmap.c code.

V2: Fix compile issue reported by kbuild test robot <lkp@intel.com>

V5: Cleanups requested by Daniel
 - Newlines before func definition
 - Use BUILD_BUG_ON checks
 - Remove unnecessary use return value store in dev_map_enqueue

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:14 -07:00
Jakub Kicinski
bd475643d7 bpf: add helper for copying attrs to struct bpf_map
All map types reimplement the field-by-field copy of union bpf_attr
members into struct bpf_map.  Add a helper to perform this operation.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-14 23:36:29 +01:00
David S. Miller
f8ddadc4db Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
There were quite a few overlapping sets of changes here.

Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.

Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly.  If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.

In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().

Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.

The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 13:39:14 +01:00
John Fastabend
8695a53956 bpf: devmap fix arithmetic overflow in bitmap_size calculation
An integer overflow is possible in dev_map_bitmap_size() when
calculating the BITS_TO_LONG logic which becomes, after macro
replacement,

	(((n) + (d) - 1)/ (d))

where 'n' is a __u32 and 'd' is (8 * sizeof(long)). To avoid
overflow cast to u64 before arithmetic.

Reported-by: Richard Weinberger <richard@nod.at>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 00:54:09 +01:00
Chenbo Feng
6e71b04a82 bpf: Add file mode configuration into bpf maps
Introduce the map read/write flags to the eBPF syscalls that returns the
map fd. The flags is used to set up the file mode when construct a new
file descriptor for bpf maps. To not break the backward capability, the
f_flags is set to O_RDWR if the flag passed by syscall is 0. Otherwise
it should be O_RDONLY or O_WRONLY. When the userspace want to modify or
read the map content, it will check the file mode to see if it is
allowed to make the change.

Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:32:59 +01:00
John Fastabend
9ef2a8cd5c bpf: require CAP_NET_ADMIN when using devmap
Devmap is used with XDP which requires CAP_NET_ADMIN so lets also
make CAP_NET_ADMIN required to use the map.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 13:01:29 +01:00
Daniel Borkmann
82f8dd28bd bpf: fix splat for illegal devmap percpu allocation
It was reported that syzkaller was able to trigger a splat on
devmap percpu allocation due to illegal/unsupported allocation
request size passed to __alloc_percpu():

  [   70.094249] illegal size (32776) or align (8) for percpu allocation
  [   70.094256] ------------[ cut here ]------------
  [   70.094259] WARNING: CPU: 3 PID: 3451 at mm/percpu.c:1365 pcpu_alloc+0x96/0x630
  [...]
  [   70.094325] Call Trace:
  [   70.094328]  __alloc_percpu_gfp+0x12/0x20
  [   70.094330]  dev_map_alloc+0x134/0x1e0
  [   70.094331]  SyS_bpf+0x9bc/0x1610
  [   70.094333]  ? selinux_task_setrlimit+0x5a/0x60
  [   70.094334]  ? security_task_setrlimit+0x43/0x60
  [   70.094336]  entry_SYSCALL_64_fastpath+0x1a/0xa5

This was due to too large max_entries for the map such that we
surpassed the upper limit of PCPU_MIN_UNIT_SIZE. It's fine to
fail naturally here, so switch to __alloc_percpu_gfp() and pass
__GFP_NOWARN instead.

Fixes: 11393cc9b9 ("xdp: Add batching support to redirect map")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Shankara Pailoor <sp3485@columbia.edu>
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:13:50 +01:00
Tobias Klauser
582db7e0c4 bpf: devmap: pass on return value of bpf_map_precharge_memlock
If bpf_map_precharge_memlock in dev_map_alloc, -ENOMEM is returned
regardless of the actual error produced by bpf_map_precharge_memlock.
Fix it by passing on the error returned by bpf_map_precharge_memlock.

Also return -EINVAL instead of -ENOMEM if the page count overflow check
fails.

This makes dev_map_alloc match the behavior of other bpf maps' alloc
functions wrt. return values.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18 16:53:30 -07:00
John Fastabend
374fb014fc bpf: devmap, use cond_resched instead of cpu_relax
Be a bit more friendly about waiting for flush bits to complete.
Replace the cpu_relax() with a cond_resched().

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08 21:11:00 -07:00
Daniel Borkmann
a5e2da6e97 bpf: netdev is never null in __dev_map_flush
No need to test for it in fast-path, every dev in bpf_dtab_netdev
is guaranteed to be non-NULL, otherwise dev_map_update_elem() will
fail in the first place.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23 22:43:40 -07:00