Since commit 89b9060987 ("kconfig: Add yes2modconfig and
mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after
changing to y or m, these targets did not save the changes.
Call sym_clear_all_valid() so that all symbols are revalidated.
Fixes: 89b9060987 ("kconfig: Add yes2modconfig and mod2yesconfig targets.")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.
This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.
When this happens, the has_changed flag should be set.
Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.
Fixes: 3b9a19e089 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull Kconfig updates from Masahiro Yamada:
- add 'yes2modconfig' and 'mod2yesconfig' targets (useful mainly for
turning syzbot configs into more modular ones as a step to minimizing
the result)
- sanitize help text
- various code cleanups
* tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix documentation typos
kconfig: fix an "implicit declaration of function" warning
kconfig: fix nesting of symbol help text
kconfig: distinguish between dependencies and visibility in help text
kconfig: list all definitions of a symbol in help text
kconfig: Add yes2modconfig and mod2yesconfig targets.
kconfig: use $(PERL) in Makefile
kconfig: fix too deep indentation in Makefile
kconfig: localmodconfig: fix indentation for closing brace
kconfig: localmodconfig: remove unused $config
kconfig: squash prop_alloc() into menu_add_prop()
kconfig: remove sym from struct property
kconfig: remove 'prompt' argument from menu_add_prop()
kconfig: move prompt handling to menu_add_prompt() from menu_add_prop()
kconfig: remove 'prompt' symbol
kconfig: drop T_WORD from the RHS of 'prompt' symbol
kconfig: use parent->dep as the parentdep of 'menu'
kconfig: remove the rootmenu check in menu_add_prop()
strncasecmp() & strcasecmp() functions are declared in strings.h, not
string.h. On most environments the former is implicitly included by
the latter but on some setups, building menuconfig results in the
following warning:
HOSTCC scripts/kconfig/mconf.o
scripts/kconfig/mconf.c: In function ‘search_conf’:
scripts/kconfig/mconf.c:423:6: warning: implicit declaration of function ‘strncasecmp’ [-Wimplicit-function-declaration]
if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0)
^~~~~~~~~~~
scripts/kconfig/mconf.c: In function ‘main’:
scripts/kconfig/mconf.c:1021:8: warning: implicit declaration of function ‘strcasecmp’ [-Wimplicit-function-declaration]
if (!strcasecmp(mode, "single_menu"))
^~~~~~~~~~
Fix it by explicitly including strings.h.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When we generate the help text of a symbol (e.g. when a user presses '?'
in menuconfig), we do two things:
1. We iterate through every prompt that belongs to that symbol,
printing its text and its location in the menu tree.
2. We print symbol-wide information that's not linked to a particular
prompt, such as what it selects/is selected by and what it
implies/is implied by.
Each prompt we print for 1 starts with a line that's not indented
indicating where the prompt is defined, then continues with indented
lines that describe properties of that particular definition.
Once we get to 2, however, we print all the global data indented as
well! Visually, this makes it look like the symbol-wide data is
associated with the last prompt we happened to print rather than
the symbol as a whole.
Fix this by removing the indentation for symbol-wide information.
Before:
Symbol: CPU_FREQ [=n]
Type : bool
Defined at drivers/cpufreq/Kconfig:4
Prompt: CPU Frequency scaling
Location:
-> CPU Power Management
-> CPU Frequency scaling
Selects: SRCU [=n]
Selected by [n]:
- ARCH_SA1100 [=n] && <choice>
After:
Symbol: CPU_FREQ [=n]
Type : bool
Defined at drivers/cpufreq/Kconfig:4
Prompt: CPU Frequency scaling
Location:
-> CPU Power Management
-> CPU Frequency scaling
Selects: SRCU [=n]
Selected by [n]:
- ARCH_SA1100 [=n] && <choice>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kconfig makes a distinction between dependencies (defined by "depends
on" expressions and enclosing "if" blocks) and visibility (which
includes all dependencies, but also includes inline "if" expressions of
individual properties as well as, for prompts, "visible if" expressions
of enclosing menus).
Before commit bcdedcc1af ("menuconfig: print more info for symbol
without prompts"), the "Depends on" lines of a symbol's help text
indicated the visibility of the prompt property they appeared under.
After bcdedcc1af, there was always only a single "Depends on" line,
which indicated the visibility of the first P_SYMBOL property of the
symbol. Since P_SYMBOLs never have inline if expressions, this was in
effect the same as the dependencies of the menu item that the P_SYMBOL
was attached to.
Neither of these situations accurately conveyed the dependencies of a
symbol--the first because it was actually the visibility, and the second
because it only showed the dependencies from a single definition.
With this series, we are back to printing separate dependencies for each
definition, but we print the actual dependencies (rather than the
visibility) in the "Depends on" line. However, it can still be useful to
know the visibility of a prompt, so this patch adds a "Visible if" line
that shows the visibility only if the visibility is different from the
dependencies (which it isn't for most prompts in Linux).
Before:
Symbol: THUMB2_KERNEL [=n]
Type : bool
Defined at arch/arm/Kconfig:1417
Prompt: Compile the kernel in Thumb-2 mode
Depends on: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n]
Location:
-> Kernel Features
Selects: ARM_UNWIND [=n]
After:
Symbol: THUMB2_KERNEL [=n]
Type : bool
Defined at arch/arm/Kconfig:1417
Prompt: Compile the kernel in Thumb-2 mode
Depends on: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n]
Visible if: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n] && !CPU_THUMBONLY [=n]
Location:
-> Kernel Features
Selects: ARM_UNWIND [=n]
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In Kconfig, each symbol (representing a config option) can be defined in
multiple places. Each definition may or may not have a prompt, which
allows the option to be set via an interface like menuconfig. Each
definition has a set of dependencies, which determine whether its prompt
is visible and whether other pieces of the definition, like a default
value, take effect.
Historically, a symbol's help text (i.e. what's shown when a user
presses '?' in menuconfig) contained some symbol-wide information not
tied to any particular definition (e.g. what other symbols it selects)
as well as the location (file name and line number) and dependencies of
each prompt. Notably, the help text did not show the location or
dependencies of definitions without prompts.
Because this made it hard to reason about symbols that had no prompts,
commit bcdedcc1af ("menuconfig: print more info for symbol without
prompts") changed the help text so that, instead of containing the
location and dependencies of each prompt, it contained the location and
dependencies of the symbol's first definition, regardless of whether or
not that definition had a prompt.
For symbols with only one definition, that change makes sense. However,
it breaks down for symbols with multiple definitions: each definition
has its own set of dependencies (the `dep` field of `struct menu`), and
those dependencies are ORed together to get the symbol's dependency list
(the `dir_dep` field of `struct symbol`). By printing only the
dependencies of the first definition, the help text misleads users into
believing that an option is more narrowly-applicable than it actually
is.
For an extreme example of this, we can look at the SYS_TEXT_BASE symbol
in the Das U-Boot project (version 2019.10), which also uses Kconfig. (I
unfortunately could not find an illustrative example in Linux.) This
config option specifies the load address of the built binary and, as
such, is applicable to basically every configuration possible. And yet,
without this patch, its help text is as follows:
Symbol: SYS_TEXT_BASE [=]
Type : hex
Prompt: U-Boot base address
Location:
-> ARM architecture
Prompt: Text Base
Location:
-> Boot images
Defined at arch/arm/mach-aspeed/Kconfig:9
Depends on: ARM [=n] && ARCH_ASPEED [=n]
The help text indicates that the option is applicable only for a
specific unselected architecture (aspeed), because that architecture's
promptless definition (which just sets a default value), happens to be
the first one seen. No definition or dependency information is printed
for either of the two prompts listed.
Because source locations and dependencies are fundamentally properties
of definitions and not of symbols, we should treat them as such. This
patch brings back the pre-bcdedcc1afd6 behavior for definitions with
prompts but also separately prints the location and dependencies of
those without prompts, solving the original problem in a different way.
With this change, our SYS_TEXT_BASE example becomes
Symbol: SYS_TEXT_BASE [=]
Type : hex
Defined at arch/arm/mach-stm32mp/Kconfig:83
Prompt: U-Boot base address
Depends on: ARM [=n] && ARCH_STM32MP [=n]
Location:
-> ARM architecture
Defined at Kconfig:532
Prompt: Text Base
Depends on: !NIOS2 [=n] && !XTENSA [=n] && !EFI_APP [=n]
Location:
-> Boot images
Defined at arch/arm/mach-aspeed/Kconfig:9
Depends on: ARM [=n] && ARCH_ASPEED [=n]
Defined at arch/arm/mach-socfpga/Kconfig:25
Depends on: ARM [=n] && ARCH_SOCFPGA [=n]
<snip>
Defined at board/sifive/fu540/Kconfig:15
Depends on: RISCV [=n] && TARGET_SIFIVE_FU540 [=n]
which is a much more accurate representation.
Note that there is one notable difference between what gets printed for
prompts after this change and what got printed before bcdedcc1af: the
"Depends on" line now accurately represents the prompt's dependencies
instead of conflating those with the prompt's visibility (which can
include extra conditions). See the patch later in this series titled
"kconfig: distinguish between dependencies and visibility in help text"
for more details and better handling of that nuance.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since kernel configs provided by syzbot are close to "make allyesconfig",
it takes long time to rebuild. This is especially waste of time when we
need to rebuild for many times (e.g. doing manual printk() inspection,
bisect operations).
We can save time if we can exclude modules which are irrelevant to each
problem. But "make localmodconfig" cannot exclude modules which are built
into vmlinux because /sbin/lsmod output is used as the source of modules.
Therefore, this patch adds "make yes2modconfig" which converts from =y
to =m if possible. After confirming that the interested problem is still
reproducible, we can try "make localmodconfig" (and/or manually tune
based on "Modules linked in:" line) in order to exclude modules which are
irrelevant to the interested problem. While we are at it, this patch also
adds "make mod2yesconfig" which converts from =m to =y in case someone
wants to convert from =m to =y after "make localmodconfig".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The top Makefile defines and exports the variable 'PERL'. Use it in
case somebody wants to specify a particular version of perl from the
command line.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is unused since commit cdfc47950a ("kconfig: search for a config
to base the local(mod|yes)config on").
Having unused $config is confusing because $config is used as a local
variable in various sub-routines.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
struct property can reference to the symbol that it is associated with
by prop->menu->sym.
Fix up the one usage of prop->sym, and remove sym from struct property.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
menu_add_prompt() is the only function that calls menu_add_prop() with
non-NULL prompt.
So, the code inside the if-conditional block of menu_add_prop() can be
moved to menu_add_prompt().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that 'prompt' is only reduced from T_WORD_QUOTE without any action,
use T_WORD_QUOTE directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8636a1f967 ("treewide: surround Kconfig file paths with double
quotes") killed use-cases to reduce an unquoted string into the 'prompt'
symbol.
Kconfig still allows to use an unquoted string in the context of menu,
source, or prompt.
So, you can omit quoting if the prompt is a single word:
bool foo
..., but I do not think this is so useful.
Let's require quoting:
bool "foo"
All the Kconfig files in the kernel are written in this way.
Remove the T_WORD from the right-hand side of the symbol 'prompt'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In menu_finalize(), the dependency of a menu entry is propagated
downwards.
For the 'menu', parent->dep and parent->prompt->visible.expr have
the same expression. Both accumulate the 'depends on' of itself and
upper menu entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit ba6ff60d5e ("kconfig: don't emit warning upon
rootmenu's prompt redefinition").
At that time, rootmenu.prompt was always set first, then it was set
again if a "mainmenu" statement was specified in the Kconfig file.
This is no longer the case since commit 0724a7c32a ("kconfig: Don't
leak main menus during parsing"). Remove the unneeded check.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit bc081dd6e9 ("kbuild: generate modules.builtin") added
infrastructure to generate modules.builtin, the list of all
builtin modules.
Basically, it works like this:
- Kconfig generates include/config/tristate.conf, the list of
tristate CONFIG options with a value in a capital letter.
- scripts/Makefile.modbuiltin makes Kbuild descend into
directories to collect the information of builtin modules.
I am not a big fan of it because Kbuild ends up with traversing
the source tree twice.
I am not sure how perfectly it should work, but this approach cannot
avoid false positives; even if the relevant CONFIG option is tristate,
some Makefiles forces obj-m to obj-y.
Some examples are:
arch/powerpc/platforms/powermac/Makefile:
obj-$(CONFIG_NVRAM:m=y) += nvram.o
net/ipv6/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
net/netlabel/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o
Nobody has complained about (or noticed) it, so it is probably fine to
have false positives in modules.builtin.
This commit simplifies the implementation. Let's exploit the fact
that every module has MODULE_LICENSE(). (modpost shows a warning if
MODULE_LICENSE is missing. If so, 0-day bot would already have blocked
such a module.)
I added MODULE_FILE to <linux/module.h>. When the code is being compiled
as builtin, it will be filled with the file path of the module, and
collected into modules.builtin.info. Then, scripts/link-vmlinux.sh
extracts the list of builtin modules out of it.
This new approach fixes the false-positives above, but adds another
type of false-positives; non-modular code may have MODULE_LICENSE()
by mistake. This is not a big deal, it is just the code is always
orphan. We can clean it up if we like. You can see cleanup examples by:
$ git log --grep='make.* explicitly non-modular'
To sum up, this commits deletes lots of code, but still produces almost
equivalent results. Please note it does not increase the vmlinux size at
all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo
section is discarded in the link stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If ncurses is installed, but at a non-default location, the previous
error message was not helpful in resolving the situation. Now it will
suggest that pkg-config might need to be installed in addition to
ncurses.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
make listnewconfig will list the individual options that need to be set.
This is useful but there's no easy way to get the help text associated
with the options at the same time. Introduce a new targe
'make helpnewconfig' which lists the full help text of all the
new options as well. This makes it easier to automatically generate
changes that are easy for humans to review. This command also adds
markers between each option for easier parsing.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
