test_ksyms_module fails to emit a kfunc call targeting a module on
s390x, because the verifier stores the difference between kfunc
address and __bpf_call_base in bpf_insn.imm, which is s32, and modules
are roughly (1 << 42) bytes away from the kernel on s390x.
Fix by keeping BTF id in bpf_insn.imm for BPF_PSEUDO_KFUNC_CALLs,
and storing the absolute address in bpf_kfunc_desc.
Introduce bpf_jit_supports_far_kfunc_call() in order to limit this new
behavior to the s390x JIT. Otherwise other JITs need to be modified,
which is not desired.
Introduce bpf_get_kfunc_addr() instead of exposing both
find_kfunc_desc() and struct bpf_kfunc_desc.
In addition to sorting kfuncs by imm, also sort them by offset, in
order to handle conflicting imms from different modules. Do this on
all architectures in order to simplify code.
Factor out resolving specialized kfuncs (XPD and dynptr) from
fixup_kfunc_call(). This was required in the first place, because
fixup_kfunc_call() uses find_kfunc_desc(), which returns a const
pointer, so it's not possible to modify kfunc addr without stripping
const, which is not nice. It also removes repetition of code like:
if (bpf_jit_supports_far_kfunc_call())
desc->addr = func;
else
insn->imm = BPF_CALL_IMM(func);
and separates kfunc_desc_tab fixups from kfunc_call fixups.
Suggested-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230412230632.885985-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.
The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit bdb7b79b4c. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.
For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:
; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
...
46: call 0xffffffffe103291c ; htab_map_update_elem
; if (err && err != -EEXIST) {
4b: cmp $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax
kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:
movl $0xffffffef, %r9d
...
movl %r9d, %eax
...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef
Fixes: bdb7b79b4c ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr.
The user must pass in a buffer to store the contents of the data slice
if a direct pointer to the data cannot be obtained.
For skb and xdp type dynptrs, these two APIs are the only way to obtain
a data slice. However, for other types of dynptrs, there is no
difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data.
For skb type dynptrs, the data is copied into the user provided buffer
if any of the data is not in the linear portion of the skb. For xdp type
dynptrs, the data is copied into the user provided buffer if the data is
between xdp frags.
If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then
the skb will be uncloned (see bpf_unclone_prologue()).
Please note that any bpf_dynptr_write() automatically invalidates any prior
data slices of the skb dynptr. This is because the skb may be cloned or
may need to pull its paged buffer into the head. As such, any
bpf_dynptr_write() will automatically have its prior data slices
invalidated, even if the write is to data in the skb head of an uncloned
skb. Please note as well that any other helper calls that change the
underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data
slices of the skb dynptr as well, for the same reasons.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-10-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add xdp dynptrs, which are dynptrs whose underlying pointer points
to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of xdp->data and xdp->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For reads and writes on the dynptr, this includes reading/writing
from/to and across fragments. Data slices through the bpf_dynptr_data
API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() should be used.
For examples of how xdp dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-9-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add skb dynptrs, which are dynptrs whose underlying pointer points
to a skb. The dynptr acts on skb data. skb dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of skb->data and skb->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For bpf prog types that don't support writes on skb data, the dynptr is
read-only (bpf_dynptr_write() will return an error)
For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write()
interfaces, reading and writing from/to data in the head as well as from/to
non-linear paged buffers is supported. Data slices through the
bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used.
For examples of how skb dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Number of files depend on linux/sched/clock.h getting included
by linux/skbuff.h which soon will no longer be the case.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
For queueing packets in XDP we want to add a new redirect map type with
support for 64-bit indexes. To prepare fore this, expand the width of the
'key' argument to the bpf_redirect_map() helper. Since BPF registers are
always 64-bit, this should be safe to do after the fact.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221108140601.149971-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of having to pass multiple arguments that describe the register,
pass the bpf_reg_state into the btf_struct_access callback. Currently,
all call sites simply reuse the btf and btf_id of the reg they want to
check the access of. The only exception to this pattern is the callsite
in check_ptr_to_map_access, hence for that case create a dummy reg to
simulate PTR_TO_BTF_ID access.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221114191547.1694267-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allocate bpf_dispatcher with bpf_prog_pack_alloc so that bpf_dispatcher
can share pages with bpf programs.
arch_prepare_bpf_dispatcher() is updated to provide a RW buffer as working
area for arch code to write to.
This also fixes CPA W^X warnning like:
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We're seeing the following new warnings on netdev/build_32bit and
netdev/build_allmodconfig_warn CI jobs:
../net/core/filter.c:8608:1: warning: symbol
'nf_conn_btf_access_lock' was not declared. Should it be static?
../net/core/filter.c:8611:5: warning: symbol 'nfct_bsa' was not
declared. Should it be static?
Fix by ensuring extern declaration is present while compiling filter.o.
Fixes: 864b656f82 ("bpf: Add support for writing to nf_conn:mark")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/2bd2e0283df36d8a4119605878edb1838d144174.1663683114.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch changes sk_getsockopt() to take the sockptr_t argument
such that it can be used by bpf_getsockopt(SOL_SOCKET) in a
latter patch.
security_socket_getpeersec_stream() is not changed. It stays
with the __user ptr (optval.user and optlen.user) to avoid changes
to other security hooks. bpf_getsockopt(SOL_SOCKET) also does not
support SO_PEERSEC.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002802.2888419-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens
with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile()
on each sub program. And then, we call it on each sub program again. jit_data
is not freed in the first call of bpf_int_jit_compile(). Similarly we don't
call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile().
If bpf_int_jit_compile() failed for one sub program, we will call
bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a
chance to call it for other sub programs. Then we will hit "goto out_free" in
jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got
bpf_jit_binary_pack_finalize() yet.
At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is
freed erroneously.
Fix this with a custom bpf_jit_free() for x86_64, which calls
bpf_jit_binary_pack_finalize() if necessary. Also, with custom
bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more,
remove it.
Fixes: 1022a5498f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc")
[1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f
[2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445
Reported-by: syzbot+2f649ec6d2eea1495a8f@syzkaller.appspotmail.com
Reported-by: syzbot+87f65c75f4a72db05445@syzkaller.appspotmail.com
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220706002612.4013790-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF core/verifier is hard-coded to permit mixing bpf2bpf and tail
calls for only x86-64. Change the logic to instead rely on a new weak
function 'bool bpf_jit_supports_subprog_tailcalls(void)', which a capable
JIT backend can override.
Update the x86-64 eBPF JIT to reflect this.
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
[jakub: drop MIPS bits and tweak patch subject]
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220617105735.733938-2-jakub@cloudflare.com
In order to add a version of bpf_prog_run_array which accesses the
bpf_prog->aux member, bpf_prog needs to be more than a forward
declaration inside bpf.h.
Given that filter.h already includes bpf.h, this merely reorders
the type declarations for filter.h users. bpf.h users now have access to
bpf_prog internals.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Link: https://lore.kernel.org/r/3ed7824e3948f22d84583649ccac0ff0d38b6b58.1655248076.git.delyank@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is the bpf_jit_harden counterpart to commit 60b58afc96 ("bpf: fix
net.core.bpf_jit_enable race"). bpf_jit_harden will be tested twice
for each subprog if there are subprogs in bpf program and constant
blinding may increase the length of program, so when running
"./test_progs -t subprogs" and toggling bpf_jit_harden between 0 and 2,
jit_subprogs may fail because constant blinding increases the length
of subprog instructions during extra passs.
So cache the value of bpf_jit_blinding_enabled() during program
allocation, and use the cached value during constant blinding, subprog
JITing and args tracking of tail call.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-4-houtao1@huawei.com
This patch is to simplify the uapi bpf.h regarding to the tstamp type
and use a similar way as the kernel to describe the value stored
in __sk_buff->tstamp.
My earlier thought was to avoid describing the semantic and
clock base for the rcv timestamp until there is more clarity
on the use case, so the __sk_buff->delivery_time_type naming instead
of __sk_buff->tstamp_type.
With some thoughts, it can reuse the UNSPEC naming. This patch first
removes BPF_SKB_DELIVERY_TIME_NONE and also
rename BPF_SKB_DELIVERY_TIME_UNSPEC to BPF_SKB_TSTAMP_UNSPEC
and BPF_SKB_DELIVERY_TIME_MONO to BPF_SKB_TSTAMP_DELIVERY_MONO.
The semantic of BPF_SKB_TSTAMP_DELIVERY_MONO is the same:
__sk_buff->tstamp has delivery time in mono clock base.
BPF_SKB_TSTAMP_UNSPEC means __sk_buff->tstamp has the (rcv)
tstamp at ingress and the delivery time at egress. At egress,
the clock base could be found from skb->sk->sk_clockid.
__sk_buff->tstamp == 0 naturally means NONE, so NONE is not needed.
With BPF_SKB_TSTAMP_UNSPEC for the rcv tstamp at ingress,
the __sk_buff->delivery_time_type is also renamed to __sk_buff->tstamp_type
which was also suggested in the earlier discussion:
https://lore.kernel.org/bpf/b181acbe-caf8-502d-4b7b-7d96b9fc5d55@iogearbox.net/
The above will then make __sk_buff->tstamp and __sk_buff->tstamp_type
the same as its kernel skb->tstamp and skb->mono_delivery_time
counter part.
The internal kernel function bpf_skb_convert_dtime_type_read() is then
renamed to bpf_skb_convert_tstamp_type_read() and it can be simplified
with the BPF_SKB_DELIVERY_TIME_NONE gone. A BPF_ALU32_IMM(BPF_AND)
insn is also saved by using BPF_JMP32_IMM(BPF_JSET).
The bpf helper bpf_skb_set_delivery_time() is also renamed to
bpf_skb_set_tstamp(). The arg name is changed from dtime
to tstamp also. It only allows setting tstamp 0 for
BPF_SKB_TSTAMP_UNSPEC and it could be relaxed later
if there is use case to change mono delivery time to
non mono.
prog->delivery_time_access is also renamed to prog->tstamp_type_access.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090509.3712315-1-kafai@fb.com
* __sk_buff->delivery_time_type:
This patch adds __sk_buff->delivery_time_type. It tells if the
delivery_time is stored in __sk_buff->tstamp or not.
It will be most useful for ingress to tell if the __sk_buff->tstamp
has the (rcv) timestamp or delivery_time. If delivery_time_type
is 0 (BPF_SKB_DELIVERY_TIME_NONE), it has the (rcv) timestamp.
Two non-zero types are defined for the delivery_time_type,
BPF_SKB_DELIVERY_TIME_MONO and BPF_SKB_DELIVERY_TIME_UNSPEC. For UNSPEC,
it can only happen in egress because only mono delivery_time can be
forwarded to ingress now. The clock of UNSPEC delivery_time
can be deduced from the skb->sk->sk_clockid which is how
the sch_etf doing it also.
* Provide forwarded delivery_time to tc-bpf@ingress:
With the help of the new delivery_time_type, the tc-bpf has a way
to tell if the __sk_buff->tstamp has the (rcv) timestamp or
the delivery_time. During bpf load time, the verifier will learn if
the bpf prog has accessed the new __sk_buff->delivery_time_type.
If it does, it means the tc-bpf@ingress is expecting the
skb->tstamp could have the delivery_time. The kernel will then
read the skb->tstamp as-is during bpf insn rewrite without
checking the skb->mono_delivery_time. This is done by adding a
new prog->delivery_time_access bit. The same goes for
writing skb->tstamp.
* bpf_skb_set_delivery_time():
The bpf_skb_set_delivery_time() helper is added to allow setting both
delivery_time and the delivery_time_type at the same time. If the
tc-bpf does not need to change the delivery_time_type, it can directly
write to the __sk_buff->tstamp as the existing tc-bpf has already been
doing. It will be most useful at ingress to change the
__sk_buff->tstamp from the (rcv) timestamp to
a mono delivery_time and then bpf_redirect_*().
bpf only has mono clock helper (bpf_ktime_get_ns), and
the current known use case is the mono EDT for fq, and
only mono delivery time can be kept during forward now,
so bpf_skb_set_delivery_time() only supports setting
BPF_SKB_DELIVERY_TIME_MONO. It can be extended later when use cases
come up and the forwarding path also supports other clock bases.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the jit binary allocator built on top of bpf_prog_pack.
bpf_prog_pack allocates RO memory, which cannot be used directly by the
JIT engine. Therefore, a temporary rw buffer is allocated for the JIT
engine. Once JIT is done, bpf_jit_binary_pack_finalize is used to copy
the program to the RO memory.
bpf_jit_binary_pack_alloc reserves 16 bytes of extra space for illegal
instructions, which is small than the 128 bytes space reserved by
bpf_jit_binary_alloc. This change is necessary for bpf_jit_binary_hdr
to find the correct header. Also, flag use_bpf_prog_pack is added to
differentiate a program allocated by bpf_jit_binary_pack_alloc.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-9-song@kernel.org
The retval value is moved to struct bpf_cg_run_ctx for ease of access
in different prog types with different context structs layouts. The
helper implementation (to be added in a later patch in the series) can
simply perform a container_of from current->bpf_ctx to retrieve
bpf_cg_run_ctx.
Unfortunately, there is no easy way to access the current task_struct
via the verifier BPF bytecode rewrite, aside from possibly calling a
helper, so a pointer to current task is added to struct bpf_sockopt_kern
so that the rewritten BPF bytecode can access struct bpf_cg_run_ctx with
an indirection.
For backward compatibility, if a getsockopt program rejects a syscall
by returning 0, an -EPERM will be generated, by having the
BPF_PROG_RUN_ARRAY_CG family macros automatically set the retval to
-EPERM. Unlike prior to this patch, this -EPERM will be visible to
ctx->retval for any other hooks down the line in the prog array.
Additionally, the restriction that getsockopt filters can only set
the retval to 0 is removed, considering that certain getsockopt
implementations may return optlen. Filters are now able to set the
value arbitrarily.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/73b0325f5c29912ccea7ea57ec1ed4d388fc1d37.1639619851.git.zhuyifei@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
