mirror of
https://github.com/armbian/linux-cix.git
synced 2026-01-06 12:30:45 -08:00
119dcafe36795a15ae53351cbbd6177aaf94ffef
1230 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Benjamin Segall
|
203003c4ff |
posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone
[ Upstream commit b5413156bad91dc2995a5c4eab1b05e56914638a ]
When cloning a new thread, its posix_cputimers are not inherited, and
are cleared by posix_cputimers_init(). However, this does not clear the
tick dependency it creates in tsk->tick_dep_mask, and the handler does
not reach the code to clear the dependency if there were no timers to
begin with.
Thus if a thread has a cputimer running before clone/fork, all
descendants will prevent nohz_full unless they create a cputimer of
their own.
Fix this by entirely clearing the tick_dep_mask in copy_process().
(There is currently no inherited state that needs a tick dependency)
Process-wide timers do not have this problem because fork does not copy
signal_struct as a baseline, it creates one from scratch.
Fixes:
|
||
Paul E. McKenney
|
7679283e61 |
rcu-tasks: Initialize data to eliminate RCU-tasks/do_exit() deadlocks
[ Upstream commit 46faf9d8e1d52e4a91c382c6c72da6bd8e68297b ] Holding a mutex across synchronize_rcu_tasks() and acquiring that same mutex in code called from do_exit() after its call to exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop() results in deadlock. This is by design, because tasks that are far enough into do_exit() are no longer present on the tasks list, making it a bit difficult for RCU Tasks to find them, let alone wait on them to do a voluntary context switch. However, such deadlocks are becoming more frequent. In addition, lockdep currently does not detect such deadlocks and they can be difficult to reproduce. In addition, if a task voluntarily context switches during that time (for example, if it blocks acquiring a mutex), then this task is in an RCU Tasks quiescent state. And with some adjustments, RCU Tasks could just as well take advantage of that fact. This commit therefore initializes the data structures that will be needed to rely on these quiescent states and to eliminate these deadlocks. Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/ Reported-by: Chen Zhongjin <chenzhongjin@huawei.com> Reported-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Stable-dep-of: fd70e9f1d85f ("rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()") Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Al Viro
|
a8023f8b55 |
close_range(): fix the logics in descriptor table trimming
commit 678379e1d4f7443b170939525d3312cfc37bf86b upstream. Cloning a descriptor table picks the size that would cover all currently opened files. That's fine for clone() and unshare(), but for close_range() there's an additional twist - we clone before we close, and it would be a shame to have close_range(3, ~0U, CLOSE_RANGE_UNSHARE) leave us with a huge descriptor table when we are not going to keep anything past stderr, just because some large file descriptor used to be open before our call has taken it out. Unfortunately, it had been dealt with in an inherently racy way - sane_fdtable_size() gets a "don't copy anything past that" argument (passed via unshare_fd() and dup_fd()), close_range() decides how much should be trimmed and passes that to unshare_fd(). The problem is, a range that used to extend to the end of descriptor table back when close_range() had looked at it might very well have stuff grown after it by the time dup_fd() has allocated a new files_struct and started to figure out the capacity of fdtable to be attached to that. That leads to interesting pathological cases; at the very least it's a QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes a snapshot of descriptor table one might have observed at some point. Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination of unshare(CLONE_FILES) with plain close_range(), ending up with a weird state that would never occur with unshare(2) is confusing, to put it mildly. It's not hard to get rid of - all it takes is passing both ends of the range down to sane_fdtable_size(). There we are under ->files_lock, so the race is trivially avoided. So we do the following: * switch close_files() from calling unshare_fd() to calling dup_fd(). * undo the calling convention change done to unshare_fd() in |
||
Sam James
|
dd782da470 |
Revert "fork: defer linking file vma until vma is fully initialized"
This reverts commit
|
||
Miaohe Lin
|
cec11fa2eb |
fork: defer linking file vma until vma is fully initialized
commit 35e351780fa9d8240dd6f7e4f245f9ea37e96c19 upstream.
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used.
Link: https://lkml.kernel.org/r/20240410091441.3539905-1-linmiaohe@huawei.com
Fixes:
|
||
Florent Revest
|
2b00d1fd9a |
mm: add a NO_INHERIT flag to the PR_SET_MDWE prctl
[ Upstream commit 24e41bf8a6b424c76c5902fb999e9eca61bdf83d ] This extends the current PR_SET_MDWE prctl arg with a bit to indicate that the process doesn't want MDWE protection to propagate to children. To implement this no-inherit mode, the tag in current->mm->flags must be absent from MMF_INIT_MASK. This means that the encoding for "MDWE but without inherit" is different in the prctl than in the mm flags. This leads to a bit of bit-mangling in the prctl implementation. Link: https://lkml.kernel.org/r/20230828150858.393570-6-revest@chromium.org Signed-off-by: Florent Revest <revest@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexey Izbyshev <izbyshev@ispras.ru> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ayush Jain <ayush.jain3@amd.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Joey Gouly <joey.gouly@arm.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com> Cc: Topi Miettinen <toiwoton@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 793838138c15 ("prctl: Disable prctl(PR_SET_MDWE) on parisc") Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
Linus Torvalds
|
e987af4546 |
Merge tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"One bigger change to percpu_counter's api allowing for init and
destroy of multiple counters via percpu_counter_init_many() and
percpu_counter_destroy_many(). This is used to help begin remediating
a performance regression with percpu rss stats.
Additionally, it seems larger core count machines are feeling the
burden of the single threaded allocation of percpu. Mateusz is
thinking about it and I will spend some time on it too.
percpu:
- A couple cleanups by Baoquan He and Bibo Mao. The only behavior
change is to start printing messages if we're under the warn limit
for failed atomic allocations.
percpu_counter:
- Shakeel introduced percpu counters into mm_struct which caused
percpu allocations be on the hot path [1]. Originally I spent some
time trying to improve the percpu allocator, but instead preferred
what Mateusz Guzik proposed grouping at the allocation site,
percpu_counter_init_many(). This allows a single percpu allocation
to be shared by the counters. I like this approach because it
creates a shared lifetime by the allocations. Additionally, I
believe many inits have higher level synchronization requirements,
like percpu_counter does against HOTPLUG_CPU. Therefore we can
group these optimizations together"
Link: https://lore.kernel.org/linux-mm/20221024052841.3291983-1-shakeelb@google.com/ [1]
* tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
kernel/fork: group allocation/free of per-cpu counters for mm struct
pcpcntr: add group allocation/free
mm/percpu.c: print error message too if atomic alloc failed
mm/percpu.c: optimize the code in pcpu_setup_first_chunk() a little bit
mm/percpu.c: remove redundant check
mm/percpu: Remove some local variables in pcpu_populate_pte
|
||
|
Linus Torvalds
|
d68b4b6f30 |
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
||
Mateusz Guzik
|
14ef95be6f |
kernel/fork: group allocation/free of per-cpu counters for mm struct
A trivial execve scalability test which tries to be very friendly (statically linked binaries, all separate) is predominantly bottlenecked by back-to-back per-cpu counter allocations which serialize on global locks. Ease the pain by allocating and freeing them in one go. Bench can be found here: http://apollo.backplane.com/DFlyMisc/doexec.c $ cc -static -O2 -o static-doexec doexec.c $ ./static-doexec $(nproc) Even at a very modest scale of 26 cores (ops/s): before: 133543.63 after: 186061.81 (+39%) While with the patch these allocations remain a significant problem, the primary bottleneck shifts to page release handling. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://lore.kernel.org/r/20230823050609.2228718-3-mjguzik@gmail.com [Dennis: reflowed 1 line] Signed-off-by: Dennis Zhou <dennis@kernel.org> |
||
|
Mateusz Guzik
|
a7031f1452 |
kernel/fork: stop playing lockless games for exe_file replacement
xchg originated in |
||
Wander Lairson Costa
|
d243b34459 |
kernel/fork: beware of __put_task_struct() calling context
Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping
locks. Therefore, it can't be called from an non-preemptible context.
One practical example is splat inside inactive_task_timer(), which is
called in a interrupt context:
CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W ---------
Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012
Call Trace:
dump_stack_lvl+0x57/0x7d
mark_lock_irq.cold+0x33/0xba
mark_lock+0x1e7/0x400
mark_usage+0x11d/0x140
__lock_acquire+0x30d/0x930
lock_acquire.part.0+0x9c/0x210
rt_spin_lock+0x27/0xe0
refill_obj_stock+0x3d/0x3a0
kmem_cache_free+0x357/0x560
inactive_task_timer+0x1ad/0x340
__run_hrtimer+0x8a/0x1a0
__hrtimer_run_queues+0x91/0x130
hrtimer_interrupt+0x10f/0x220
__sysvec_apic_timer_interrupt+0x7b/0xd0
sysvec_apic_timer_interrupt+0x4f/0xd0
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0033:0x7fff196bf6f5
Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.
The issue is reproducible with stress-ng:
while true; do
stress-ng --sched deadline --sched-period 1000000000 \
--sched-runtime 800000000 --sched-deadline \
1000000000 --mmapfork 23 -t 20
done
Reported-by: Hu Chunyu <chuhu@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com
|
||
Suren Baghdasaryan
|
fb49c45532 |
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes:
|
||
|
Linus Torvalds
|
77b1a7f7a0 |
Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton: - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level directories - Douglas Anderson has added a new "buddy" mode to the hardlockup detector. It permits the detector to work on architectures which cannot provide the required interrupts, by having CPUs periodically perform checks on other CPUs - Zhen Lei has enhanced kexec's ability to support two crash regions - Petr Mladek has done a lot of cleanup on the hard lockup detector's Kconfig entries - And the usual bunch of singleton patches in various places * tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) kernel/time/posix-stubs.c: remove duplicated include ocfs2: remove redundant assignment to variable bit_off watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h devres: show which resource was invalid in __devm_ioremap_resource() watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64 watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h watchdog/hardlockup: make the config checks more straightforward watchdog/hardlockup: sort hardlockup detector related config values a logical way watchdog/hardlockup: move SMP barriers from common code to buddy code watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY watchdog/buddy: don't copy the cpumask in watchdog_next_cpu() watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog() watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy() watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick() watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe() watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails ... |
||
Haifeng Xu
|
4e2f6342cc |
fork: optimize memcg_charge_kernel_stack() a bit
Since commit
|
||
Jakub Kicinski
|
c9d99cfa66 |
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2023-06-07 We've added 7 non-merge commits during the last 7 day(s) which contain a total of 12 files changed, 112 insertions(+), 7 deletions(-). The main changes are: 1) Fix a use-after-free in BPF's task local storage, from KP Singh. 2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa. 3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet. 4) UAPI fix for BPF_NETFILTER before final kernel ships, from Florian Westphal. 5) Fix map-in-map array_map_gen_lookup code generation where elem_size was not being set for inner maps, from Rhys Rustad-Elliott. 6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add extra path pointer check to d_path helper selftests/bpf: Fix sockopt_sk selftest bpf: netfilter: Add BPF_NETFILTER bpf_attach_type selftests/bpf: Add access_inner_map selftest bpf: Fix elem_size not being set for inner maps bpf: Fix UAF in task local storage bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready() ==================== Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
KP Singh
|
b0fd1852bc |
bpf: Fix UAF in task local storage
When task local storage was generalized for tracing programs, the
bpf_task_local_storage callback was moved from a BPF LSM hook
callback for security_task_free LSM hook to it's own callback. But a
failure case in bad_fork_cleanup_security was missed which, when
triggered, led to a dangling task owner pointer and a subsequent
use-after-free. Move the bpf_task_storage_free to the very end of
free_task to handle all failure cases.
This issue was noticed when a BPF LSM program was attached to the
task_alloc hook on a kernel with KASAN enabled. The program used
bpf_task_storage_get to copy the task local storage from the current
task to the new task being created.
Fixes:
|
||
Mike Christie
|
f9010dbdce |
fork, vhost: Use CLONE_THREAD to fix freezer/ps regression
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes:
|
||
|
Linus Torvalds
|
58390c8ce1 |
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
||
|
Linus Torvalds
|
d579c468d7 |
Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt: - User events are finally ready! After lots of collaboration between various parties, we finally locked down on a stable interface for user events that can also work with user space only tracing. This is implemented by telling the kernel (or user space library, but that part is user space only and not part of this patch set), where the variable is that the application uses to know if something is listening to the trace. There's also an interface to tell the kernel about these events, which will show up in the /sys/kernel/tracing/events/user_events/ directory, where it can be enabled. When it's enabled, the kernel will update the variable, to tell the application to start writing to the kernel. See https://lwn.net/Articles/927595/ - Cleaned up the direct trampolines code to simplify arm64 addition of direct trampolines. Direct trampolines use the ftrace interface but instead of jumping to the ftrace trampoline, applications (mostly BPF) can register their own trampoline for performance reasons. - Some updates to the fprobe infrastructure. fprobes are more efficient than kprobes, as it does not need to save all the registers that kprobes on ftrace do. More work needs to be done before the fprobes will be exposed as dynamic events. - More updates to references to the obsolete path of /sys/kernel/debug/tracing for the new /sys/kernel/tracing path. - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line by line instead of all at once. There are users in production kernels that have a large data dump that originally used printk() directly, but the data dump was larger than what printk() allowed as a single print. Using seq_buf() to do the printing fixes that. - Add /sys/kernel/tracing/touched_functions that shows all functions that was every traced by ftrace or a direct trampoline. This is used for debugging issues where a traced function could have caused a crash by a bpf program or live patching. - Add a "fields" option that is similar to "raw" but outputs the fields of the events. It's easier to read by humans. - Some minor fixes and clean ups. * tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits) ring-buffer: Sync IRQ works before buffer destruction tracing: Add missing spaces in trace_print_hex_seq() ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus recordmcount: Fix memory leaks in the uwrite function tracing/user_events: Limit max fault-in attempts tracing/user_events: Prevent same address and bit per process tracing/user_events: Ensure bit is cleared on unregister tracing/user_events: Ensure write index cannot be negative seq_buf: Add seq_buf_do_printk() helper tracing: Fix print_fields() for __dyn_loc/__rel_loc tracing/user_events: Set event filter_type from type ring-buffer: Clearly check null ptr returned by rb_set_head_page() tracing: Unbreak user events tracing/user_events: Use print_format_fields() for trace output tracing/user_events: Align structs with tabs for readability tracing/user_events: Limit global user_event count tracing/user_events: Charge event allocs to cgroups tracing/user_events: Update documentation for ABI tracing/user_events: Use write ABI in example tracing/user_events: Add ABI self-test ... |
||
|
Linus Torvalds
|
586b222d74 |
Merge tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar: - Allow unprivileged PSI poll()ing - Fix performance regression introduced by mm_cid - Improve livepatch stalls by adding livepatch task switching to cond_resched(). This resolves livepatching busy-loop stalls with certain CPU-bound kthreads - Improve sched_move_task() performance on autogroup configs - On core-scheduling CPUs, avoid selecting throttled tasks to run - Misc cleanups, fixes and improvements * tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock: Fix local_clock() before sched_clock_init() sched/rt: Fix bad task migration for rt tasks sched: Fix performance regression introduced by mm_cid sched/core: Make sched_dynamic_mutex static sched/psi: Allow unprivileged polling of N*2s period sched/psi: Extract update_triggers side effect sched/psi: Rename existing poll members in preparation sched/psi: Rearrange polling code in preparation sched/fair: Fix inaccurate tally of ttwu_move_affine vhost: Fix livepatch timeouts in vhost_worker() livepatch,sched: Add livepatch task switching to cond_resched() livepatch: Skip task_call_func() for current task livepatch: Convert stack entries array to percpu sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization sched/core: Reduce cost of sched_move_task when config autogroup sched/core: Avoid selecting the task that is throttled to run when core-sched enable sched/topology: Make sched_energy_mutex,update static |
||
|
Linus Torvalds
|
7fa8a8ee94 |
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
ec40758b31 |
Merge tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner: "This adds a new pidfd_prepare() helper which allows the caller to reserve a pidfd number and allocates a new pidfd file that stashes the provided struct pid. It should be avoided installing a file descriptor into a task's file descriptor table just to close it again via close_fd() in case an error occurs. The fd has been visible to userspace and might already be in use. Instead, a file descriptor should be reserved but not installed into the caller's file descriptor table. If another failure path is hit then the reserved file descriptor and file can just be put without any userspace visible side-effects. And if all failure paths are cleared the file descriptor and file can be installed into the task's file descriptor table. This helper is now used in all places that open coded this functionality before. For example, this is currently done during copy_process() and fanotify used pidfd_create(), which returns a pidfd that has already been made visibile in the caller's file descriptor table, but then closed it using close_fd(). In one of the next merge windows there is also new functionality coming to unix domain sockets that will have to rely on pidfd_prepare()" * tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fanotify: use pidfd_prepare() fork: use pidfd_prepare() pid: add pidfd_prepare() |
||
|
Linus Torvalds
|
3323ddce08 |
Merge tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull user work thread updates from Christian Brauner:
"This contains the work generalizing the ability to create a kernel
worker from a userspace process.
Such user workers will run with the same credentials as the userspace
process they were created from providing stronger security and
accounting guarantees than the traditional override_creds() approach
ever could've hoped for.
The original work was heavily based and optimzed for the needs of
io_uring which was the first user. However, as it quickly turned out
the ability to create user workers inherting properties from a
userspace process is generally useful.
The vhost subsystem currently creates workers using the kthread api.
The consequences of using the kthread api are that RLIMITs don't work
correctly as they are inherited from khtreadd. This leads to bugs
where more workers are created than would be allowed by the RLIMITs of
the userspace process in lieu of which workers are created.
Problems like this disappear with user workers created from the
userspace processes for which they perform the work. In addition,
providing this api allows vhost to remove additional complexity. For
example, cgroup and mm sharing will just work out of the box with user
workers based on the relevant userspace process instead of manually
ensuring the correct cgroup and mm contexts are used.
So the vhost subsystem should simply be made to use the same mechanism
as io_uring. To this end the original mechanism used for
create_io_thread() is generalized into user workers:
- Introduce PF_USER_WORKER as a generic indicator that a given task
is a user worker, i.e., a kernel task that was created from a
userspace process. Now a PF_IO_WORKER thread is just a specialized
version of PF_USER_WORKER. So io_uring io workers raise both flags.
- Make copy_process() available to core kernel code
- Extend struct kernel_clone_args with the following bitfields
allowing to indicate to copy_process():
- to create a user worker (raise PF_USER_WORKER)
- to not inherit any files from the userspace process
- to ignore signals
After all generic changes are in place the vhost subsystem implements
a new dedicated vhost api based on user workers. Finally, vhost is
switched to rely on the new api moving it off of kthreads.
Thanks to Mike for sticking it out and making it through this rather
arduous journey"
* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
vhost: use vhost_tasks for worker threads
vhost: move worker thread fields to new struct
vhost_task: Allow vhost layer to use copy_process
fork: allow kernel code to call copy_process
fork: Add kernel_clone_args flag to ignore signals
fork: add kernel_clone_args flag to not dup/clone files
fork/vm: Move common PF_IO_WORKER behavior to new flag
kernel: Make io_thread and kthread bit fields
kthread: Pass in the thread's name during creation
kernel: Allow a kernel thread's name to be set in copy_process
csky: Remove kernel_thread declaration
|
||
Mathieu Desnoyers
|
223baf9d17 |
sched: Fix performance regression introduced by mm_cid
Introduce per-mm/cpu current concurrency id (mm_cid) to fix a PostgreSQL
sysbench regression reported by Aaron Lu.
Keep track of the currently allocated mm_cid for each mm/cpu rather than
freeing them immediately on context switch. This eliminates most atomic
operations when context switching back and forth between threads
belonging to different memory spaces in multi-threaded scenarios (many
processes, each with many threads). The per-mm/per-cpu mm_cid values are
serialized by their respective runqueue locks.
Thread migration is handled by introducing invocation to
sched_mm_cid_migrate_to() (with destination runqueue lock held) in
activate_task() for migrating tasks. If the destination cpu's mm_cid is
unset, and if the source runqueue is not actively using its mm_cid, then
the source cpu's mm_cid is moved to the destination cpu on migration.
Introduce a task-work executed periodically, similarly to NUMA work,
which delays reclaim of cid values when they are unused for a period of
time.
Keep track of the allocation time for each per-cpu cid, and let the task
work clear them when they are observed to be older than
SCHED_MM_CID_PERIOD_NS and unused. This task work also clears all
mm_cids which are greater or equal to the Hamming weight of the mm
cidmask to keep concurrency ids compact.
Because we want to ensure the mm_cid converges towards the smaller
values as migrations happen, the prior optimization that was done when
context switching between threads belonging to the same mm is removed,
because it could delay the lazy release of the destination runqueue
mm_cid after it has been replaced by a migration. Removing this prior
optimization is not an issue performance-wise because the introduced
per-mm/per-cpu mm_cid tracking also covers this more specific case.
Fixes:
|
||
Andrew Morton
|
f8f238ffe5 | sync mm-stable with mm-hotfixes-stable to pick up depended-upon upstream changes |