Commit Graph

109 Commits

Author SHA1 Message Date
Maciej Fijalkowski
8e85893069 bpf: fix OOB devmap writes when deleting elements
commit ab244dd7cf4c291f82faacdc50b45cc0f55b674d upstream.

Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.

When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.

Example splat below:

[  160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[  160.731662] #PF: supervisor read access in kernel mode
[  160.736876] #PF: error_code(0x0000) - not-present page
[  160.742095] PGD 0 P4D 0
[  160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[  160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[  160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[  160.767642] Workqueue: events_unbound bpf_map_free_deferred
[  160.773308] RIP: 0010:dev_map_free+0x77/0x170
[  160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[  160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[  160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[  160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[  160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[  160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[  160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[  160.838310] FS:  0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[  160.846528] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[  160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  160.874092] PKRU: 55555554
[  160.876847] Call Trace:
[  160.879338]  <TASK>
[  160.881477]  ? __die+0x20/0x60
[  160.884586]  ? page_fault_oops+0x15a/0x450
[  160.888746]  ? search_extable+0x22/0x30
[  160.892647]  ? search_bpf_extables+0x5f/0x80
[  160.896988]  ? exc_page_fault+0xa9/0x140
[  160.900973]  ? asm_exc_page_fault+0x22/0x30
[  160.905232]  ? dev_map_free+0x77/0x170
[  160.909043]  ? dev_map_free+0x58/0x170
[  160.912857]  bpf_map_free_deferred+0x51/0x90
[  160.917196]  process_one_work+0x142/0x370
[  160.921272]  worker_thread+0x29e/0x3b0
[  160.925082]  ? rescuer_thread+0x4b0/0x4b0
[  160.929157]  kthread+0xd4/0x110
[  160.932355]  ? kthread_park+0x80/0x80
[  160.936079]  ret_from_fork+0x2d/0x50
[  160.943396]  ? kthread_park+0x80/0x80
[  160.950803]  ret_from_fork_asm+0x11/0x20
[  160.958482]  </TASK>

Fixes: 546ac1ffb7 ("bpf: add devmap, a map for storing net device references")
CC: stable@vger.kernel.org
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Jordy Zomer <jordyzomer@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20241122121030.716788-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14 19:59:56 +01:00
Florian Kauer
49454f0993 bpf: devmap: provide rxq after redirect
[ Upstream commit ca9984c5f0ab3690d98b13937b2485a978c8dd73 ]

rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.

This is particularly bad since accessing ingress_ifindex, e.g.

SEC("xdp")
int prog(struct xdp_md *pkt)
{
        return bpf_redirect_map(&dev_redirect_map, 0, 0);
}

SEC("xdp/devmap")
int prog_after_redirect(struct xdp_md *pkt)
{
        bpf_printk("ifindex %i", pkt->ingress_ifindex);
        return XDP_PASS;
}

depends on access to rxq, so a NULL pointer gets dereferenced:

<1>[  574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[  574.475188] #PF: supervisor read access in kernel mode
<1>[  574.475194] #PF: error_code(0x0000) - not-present page
<6>[  574.475199] PGD 0 P4D 0
<4>[  574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[  574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23
<4>[  574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023
<4>[  574.475231] Workqueue: mld mld_ifc_work
<4>[  574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[  574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b
<4>[  574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206
<4>[  574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000
<4>[  574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0
<4>[  574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001
<4>[  574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000
<4>[  574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000
<4>[  574.475289] FS:  0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000
<4>[  574.475294] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0
<4>[  574.475303] PKRU: 55555554
<4>[  574.475306] Call Trace:
<4>[  574.475313]  <IRQ>
<4>[  574.475318]  ? __die+0x23/0x70
<4>[  574.475329]  ? page_fault_oops+0x180/0x4c0
<4>[  574.475339]  ? skb_pp_cow_data+0x34c/0x490
<4>[  574.475346]  ? kmem_cache_free+0x257/0x280
<4>[  574.475357]  ? exc_page_fault+0x67/0x150
<4>[  574.475368]  ? asm_exc_page_fault+0x26/0x30
<4>[  574.475381]  ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[  574.475386]  bq_xmit_all+0x158/0x420
<4>[  574.475397]  __dev_flush+0x30/0x90
<4>[  574.475407]  veth_poll+0x216/0x250 [veth]
<4>[  574.475421]  __napi_poll+0x28/0x1c0
<4>[  574.475430]  net_rx_action+0x32d/0x3a0
<4>[  574.475441]  handle_softirqs+0xcb/0x2c0
<4>[  574.475451]  do_softirq+0x40/0x60
<4>[  574.475458]  </IRQ>
<4>[  574.475461]  <TASK>
<4>[  574.475464]  __local_bh_enable_ip+0x66/0x70
<4>[  574.475471]  __dev_queue_xmit+0x268/0xe40
<4>[  574.475480]  ? selinux_ip_postroute+0x213/0x420
<4>[  574.475491]  ? alloc_skb_with_frags+0x4a/0x1d0
<4>[  574.475502]  ip6_finish_output2+0x2be/0x640
<4>[  574.475512]  ? nf_hook_slow+0x42/0xf0
<4>[  574.475521]  ip6_finish_output+0x194/0x300
<4>[  574.475529]  ? __pfx_ip6_finish_output+0x10/0x10
<4>[  574.475538]  mld_sendpack+0x17c/0x240
<4>[  574.475548]  mld_ifc_work+0x192/0x410
<4>[  574.475557]  process_one_work+0x15d/0x380
<4>[  574.475566]  worker_thread+0x29d/0x3a0
<4>[  574.475573]  ? __pfx_worker_thread+0x10/0x10
<4>[  574.475580]  ? __pfx_worker_thread+0x10/0x10
<4>[  574.475587]  kthread+0xcd/0x100
<4>[  574.475597]  ? __pfx_kthread+0x10/0x10
<4>[  574.475606]  ret_from_fork+0x31/0x50
<4>[  574.475615]  ? __pfx_kthread+0x10/0x10
<4>[  574.475623]  ret_from_fork_asm+0x1a/0x30
<4>[  574.475635]  </TASK>
<4>[  574.475637] Modules linked in: veth br_netfilter bridge stp llc iwlmvm x86_pkg_temp_thermal iwlwifi efivarfs nvme nvme_core
<4>[  574.475662] CR2: 0000000000000000
<4>[  574.475668] ---[ end trace 0000000000000000 ]---

Therefore, provide it to the program by setting rxq properly.

Fixes: cb261b594b ("bpf: Run devmap xdp_prog on flush instead of bulk enqueue")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-1-5c643ae10258@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01 01:58:17 +01:00
Toke Høiland-Jørgensen
250051acc2 bpf: Fix DEVMAP_HASH overflow check on 32-bit arches
[ Upstream commit 281d464a34f540de166cee74b723e97ac2515ec3 ]

The devmap code allocates a number hash buckets equal to the next power
of two of the max_entries value provided when creating the map. When
rounding up to the next power of two, the 32-bit variable storing the
number of buckets can overflow, and the code checks for overflow by
checking if the truncated 32-bit value is equal to 0. However, on 32-bit
arches the rounding up itself can overflow mid-way through, because it
ends up doing a left-shift of 32 bits on an unsigned long value. If the
size of an unsigned long is four bytes, this is undefined behaviour, so
there is no guarantee that we'll end up with a nice and tidy 0-value at
the end.

Syzbot managed to turn this into a crash on arm32 by creating a
DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it.
Fix this by moving the overflow check to before the rounding up
operation.

Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Link: https://lore.kernel.org/r/000000000000ed666a0611af6818@google.com
Reported-and-tested-by: syzbot+8cd36f6b65f3cafd400a@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240307120340.99577-2-toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26 18:19:39 -04:00
Hou Tao
1ea66e89f6 bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
Commit 96360004b8 ("xdp: Make devmap flush_list common for all map
instances") removes the use of bpf_dtab_netdev::dtab in bq_enqueue(),
so just remove dtab from bpf_dtab_netdev.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230728014942.892272-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-07-31 18:26:08 -07:00
Andrii Nakryiko
6c3eba1c5e bpf: Centralize permissions checks for all BPF map types
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
2023-06-19 14:04:04 +02:00
JP Kobryn
d7ba4cc900 bpf: return long from bpf_map_ops funcs
This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.

The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit bdb7b79b4c. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.

For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:

; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
  ...
  46:	call   0xffffffffe103291c	; htab_map_update_elem
; if (err && err != -EEXIST) {
  4b:	cmp    $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax

kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:

movl $0xffffffef, %r9d
...
movl %r9d, %eax

...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef

Fixes: bdb7b79b4c ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-22 15:11:30 -07:00
Yafang Shao
fa5e83df17 bpf: devmap memory usage
A new helper is introduced to calculate the memory usage of devmap and
devmap_hash. The number of dynamically allocated elements are recored
for devmap_hash already, but not for devmap. To track the memory size of
dynamically allocated elements, this patch also count the numbers for
devmap.

The result as follows,
- before
40: devmap  name count_map  flags 0x80
        key 4B  value 4B  max_entries 65536  memlock 524288B
41: devmap_hash  name count_map  flags 0x80
        key 4B  value 4B  max_entries 65536  memlock 524288B

- after
40: devmap  name count_map  flags 0x80  <<<< no elements
        key 4B  value 4B  max_entries 65536  memlock 524608B
41: devmap_hash  name count_map  flags 0x80 <<<< no elements
        key 4B  value 4B  max_entries 65536  memlock 524608B

Note that the number of buckets is same with max_entries for devmap_hash
in this case.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230305124615.12358-11-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07 09:33:42 -08:00
Lorenzo Bianconi
b9d460c924 bpf: devmap: check XDP features in __xdp_enqueue routine
Check if the destination device implements ndo_xdp_xmit callback relying
on NETDEV_XDP_ACT_NDO_XMIT flags. Moreover, check if the destination device
supports XDP non-linear frame in __xdp_enqueue and is_valid_dst routines.
This patch allows to perform XDP_REDIRECT on non-linear XDP buffers.

Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/26a94c33520c0bfba021b3fbb2cb8c1e69bf53b8.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-02-02 20:48:24 -08:00
Toke Høiland-Jørgensen
32637e3300 bpf: Expand map key argument of bpf_redirect_map to u64
For queueing packets in XDP we want to add a new redirect map type with
support for 64-bit indexes. To prepare fore this, expand the width of the
'key' argument to the bpf_redirect_map() helper. Since BPF registers are
always 64-bit, this should be safe to do after the fact.

Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221108140601.149971-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-11-15 09:00:27 -08:00
Yafang Shao
73cf09a36b bpf: Use bpf_map_area_alloc consistently on bpf map creation
Let's use the generic helper bpf_map_area_alloc() instead of the
open-coded kzalloc helpers in bpf maps creation path.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20220810151840.16394-5-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-10 11:50:43 -07:00
Yafang Shao
992c9e13f5 bpf: Make __GFP_NOWARN consistent in bpf map creation
Some of the bpf maps are created with __GFP_NOWARN, i.e. arraymap,
bloom_filter, bpf_local_storage, bpf_struct_ops, lpm_trie,
queue_stack_maps, reuseport_array, stackmap and xskmap, while others are
created without __GFP_NOWARN, i.e. cpumap, devmap, hashtab,
local_storage, offload, ringbuf and sock_map. But there are not key
differences between the creation of these maps. So let make this
allocation flag consistent in all bpf maps creation. Then we can use a
generic helper to alloc all bpf maps.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20220810151840.16394-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-10 11:49:25 -07:00
Lorenzo Bianconi
bd82ea52f0 bpf, devmap: Compute proper xdp_frame len redirecting frames
Even if it is currently forbidden to XDP_REDIRECT a multi-frag xdp_frame into
a devmap, compute proper xdp_frame length in __xdp_enqueue and is_valid_dst
routines running xdp_get_frame_len().

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/894d99c01139e921bdb6868158ff8e67f661c072.1658596075.git.lorenzo@kernel.org
2022-07-26 16:26:19 +02:00
Yafang Shao
ace2bee839 bpf: Make non-preallocated allocation low priority
GFP_ATOMIC doesn't cooperate well with memcg pressure so far, especially
if we allocate too much GFP_ATOMIC memory. For example, when we set the
memcg limit to limit a non-preallocated bpf memory, the GFP_ATOMIC can
easily break the memcg limit by force charge. So it is very dangerous to
use GFP_ATOMIC in non-preallocated case. One way to make it safe is to
remove __GFP_HIGH from GFP_ATOMIC, IOW, use (__GFP_ATOMIC |
__GFP_KSWAPD_RECLAIM) instead, then it will be limited if we allocate
too much memory. There's a plan to completely remove __GFP_ATOMIC in the
mm side[1], so let's use GFP_NOWAIT instead.

We introduced BPF_F_NO_PREALLOC is because full map pre-allocation is
too memory expensive for some cases. That means removing __GFP_HIGH
doesn't break the rule of BPF_F_NO_PREALLOC, but has the same goal with
it-avoiding issues caused by too much memory. So let's remove it.

This fix can also apply to other run-time allocations, for example, the
allocation in lpm trie, local storage and devmap. So let fix it
consistently over the bpf code

It also fixes a typo in the comment.

[1]. https://lore.kernel.org/linux-mm/163712397076.13692.4727608274002939094@noble.neil.brown.name/

Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20220709154457.57379-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-07-12 17:44:27 -07:00
Menglong Dong
c317ab71fa bpf: Compute map_btf_id during build time
For now, the field 'map_btf_id' in 'struct bpf_map_ops' for all map
types are computed during vmlinux-btf init:

  btf_parse_vmlinux() -> btf_vmlinux_map_ids_init()

It will lookup the btf_type according to the 'map_btf_name' field in
'struct bpf_map_ops'. This process can be done during build time,
thanks to Jiri's resolve_btfids.

selftest of map_ptr has passed:

  $96 map_ptr:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-04-26 11:35:21 -07:00
Toke Hoiland-Jorgensen
f45d5b6ce2 bpf: generalise tail call map compatibility check
The check for tail call map compatibility ensures that tail calls only
happen between maps of the same type. To ensure backwards compatibility for
XDP frags we need a similar type of check for cpumap and devmap
programs, so move the state from bpf_array_aux into bpf_map, add
xdp_has_frags to the check, and apply the same check to cpumap and devmap.

Acked-by: John Fastabend <john.fastabend@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/f19fd97c0328a39927f3ad03e1ca6b43fd53cdfd.1642758637.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21 14:14:03 -08:00
Toke Høiland-Jørgensen
d53ad5d8b2 xdp: Move conversion to xdp_frame out of map functions
All map redirect functions except XSK maps convert xdp_buff to xdp_frame
before enqueueing it. So move this conversion of out the map functions
and into xdp_do_redirect(). This removes a bit of duplicated code, but more
importantly it makes it possible to support caller-allocated xdp_frame
structures, which will be added in a subsequent commit.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220103150812.87914-5-toke@redhat.com
2022-01-05 19:46:32 -08:00
Paolo Abeni
c8064e5b4a bpf: Let bpf_warn_invalid_xdp_action() report more info
In non trivial scenarios, the action id alone is not sufficient to
identify the program causing the warning. Before the previous patch,
the generated stack-trace pointed out at least the involved device
driver.

Let's additionally include the program name and id, and the relevant
device name.

If the user needs additional infos, he can fetch them via a kernel
probe, leveraging the arguments added here.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-13 22:28:27 +01:00
Jussi Maki
aeea1b86f9 bpf, devmap: Exclude XDP broadcast to master device
If the ingress device is bond slave, do not broadcast back through it or
the bond master.

Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210731055738.16820-5-joamaki@gmail.com
2021-08-09 23:25:14 +02:00
David S. Miller
82a1ffe57e Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-07-15

The following pull-request contains BPF updates for your *net-next* tree.

We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).

The main changes are:

1) Introduce bpf timers, from Alexei.

2) Add sockmap support for unix datagram socket, from Cong.

3) Fix potential memleak and UAF in the verifier, from He.

4) Add bpf_get_func_ip helper, from Jiri.

5) Improvements to generic XDP mode, from Kumar.

6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-15 22:40:10 -07:00
Kumar Kartikeya Dwivedi
2ea5eabaf0 bpf: devmap: Implement devmap prog execution for generic XDP
This lifts the restriction on running devmap BPF progs in generic
redirect mode. To match native XDP behavior, it is invoked right before
generic_xdp_tx is called, and only supports XDP_PASS/XDP_ABORTED/
XDP_DROP actions.

We also return 0 even if devmap program drops the packet, as
semantically redirect has already succeeded and the devmap prog is the
last point before TX of the packet to device where it can deliver a
verdict on the packet.

This also means it must take care of freeing the skb, as
xdp_do_generic_redirect callers only do that in case an error is
returned.

Since devmap entry prog is supported, remove the check in
generic_xdp_install entirely.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210702111825.491065-5-memxor@gmail.com
2021-07-07 20:01:45 -07:00
Toke Høiland-Jørgensen
0fc4dcc13f bpf, devmap: Convert remaining READ_ONCE() to rcu_dereference_check()
There were a couple of READ_ONCE()-invocations left-over by the devmap
RCU conversion. Convert these to rcu_dereference_check() as well to avoid
complaints from sparse.

Fixes: 782347b6bc ("xdp: Add proper __rcu annotations to redirect map entries")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210629093907.573598-1-toke@redhat.com
2021-07-01 09:28:38 +02:00
Jakub Kicinski
b6df00789e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Trivial conflict in net/netfilter/nf_tables_api.c.

Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.

skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-29 15:45:27 -07:00
Toke Høiland-Jørgensen
782347b6bc xdp: Add proper __rcu annotations to redirect map entries
XDP_REDIRECT works by a three-step process: the bpf_redirect() and
bpf_redirect_map() helpers will lookup the target of the redirect and store
it (along with some other metadata) in a per-CPU struct bpf_redirect_info.
Next, when the program returns the XDP_REDIRECT return code, the driver
will call xdp_do_redirect() which will use the information thus stored to
actually enqueue the frame into a bulk queue structure (that differs
slightly by map type, but shares the same principle). Finally, before
exiting its NAPI poll loop, the driver will call xdp_do_flush(), which will
flush all the different bulk queues, thus completing the redirect.

Pointers to the map entries will be kept around for this whole sequence of
steps, protected by RCU. However, there is no top-level rcu_read_lock() in
the core code; instead drivers add their own rcu_read_lock() around the XDP
portions of the code, but somewhat inconsistently as Martin discovered[0].
However, things still work because everything happens inside a single NAPI
poll sequence, which means it's between a pair of calls to
local_bh_disable()/local_bh_enable(). So Paul suggested[1] that we could
document this intention by using rcu_dereference_check() with
rcu_read_lock_bh_held() as a second parameter, thus allowing sparse and
lockdep to verify that everything is done correctly.

This patch does just that: we add an __rcu annotation to the map entry
pointers and remove the various comments explaining the NAPI poll assurance
strewn through devmap.c in favour of a longer explanation in filter.c. The
goal is to have one coherent documentation of the entire flow, and rely on
the RCU annotations as a "standard" way of communicating the flow in the
map code (which can additionally be understood by sparse and lockdep).

The RCU annotation replacements result in a fairly straight-forward
replacement where READ_ONCE() becomes rcu_dereference_check(), WRITE_ONCE()
becomes rcu_assign_pointer() and xchg() and cmpxchg() gets wrapped in the
proper constructs to cast the pointer back and forth between __rcu and
__kernel address space (for the benefit of sparse). The one complication is
that xskmap has a few constructions where double-pointers are passed back
and forth; these simply all gain __rcu annotations, and only the final
reference/dereference to the inner-most pointer gets changed.

With this, everything can be run through sparse without eliciting
complaints, and lockdep can verify correctness even without the use of
rcu_read_lock() in the drivers. Subsequent patches will clean these up from
the drivers.

[0] https://lore.kernel.org/bpf/20210415173551.7ma4slcbqeyiba2r@kafai-mbp.dhcp.thefacebook.com/
[1] https://lore.kernel.org/bpf/20210419165837.GA975577@paulmck-ThinkPad-P17-Gen-1/

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com
2021-06-24 19:41:15 +02:00
Bui Quang Minh
7dd5d437c2 bpf: Fix integer overflow in argument calculation for bpf_map_area_alloc
In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.

Fix this by casting 1 operand to u64.

Fixes: 0d2c4f9640 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064fb ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ffb7 ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
2021-06-22 10:14:29 -07:00
Hangbin Liu
e8e0f0f484 bpf, devmap: Remove drops variable from bq_xmit_all()
As Colin pointed out, the first drops assignment after declaration will
be overwritten by the second drops assignment before using, which makes
it useless.

Since the drops variable will be used only once. Just remove it and
use "cnt - sent" in trace_xdp_devmap_xmit().

Fixes: cb261b594b ("bpf: Run devmap xdp_prog on flush instead of bulk enqueue")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210528024356.24333-1-liuhangbin@gmail.com
2021-05-28 22:14:18 +02:00