Pull vfs tmpfile updates from Al Viro:
"Miklos' ->tmpfile() signature change; pass an unopened struct file to
it, let it open the damn thing. Allows to add tmpfile support to FUSE"
* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: implement ->tmpfile()
vfs: open inside ->tmpfile()
vfs: move open right after ->tmpfile()
vfs: make vfs_tmpfile() static
ovl: use vfs_tmpfile_open() helper
cachefiles: use vfs_tmpfile_open() helper
cachefiles: only pass inode to *mark_inode_inuse() helpers
cachefiles: tmpfile error handling cleanup
hugetlbfs: cleanup mknod and tmpfile
vfs: add vfs_tmpfile_open() helper
This is in preparation for adding tmpfile support to fuse, which requires
that the tmpfile creation and opening are done as a single operation.
Replace the 'struct dentry *' argument of i_op->tmpfile with
'struct file *'.
Call finish_open_simple() as the last thing in ->tmpfile() instances (may
be omitted in the error case).
Change d_tmpfile() argument to 'struct file *' as well to make callers more
readable.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
__d_lookup_done() wakes waiters on dentry->d_wait. On PREEMPT_RT we are
not allowed to do that with preemption disabled, since the wakeup
acquired wait_queue_head::lock, which is a "sleeping" spinlock on RT.
Calling it under dentry->d_lock is not a problem, since that is also a
"sleeping" spinlock on the same configs. Unfortunately, two of its
callers (__d_add() and __d_move()) are holding more than just ->d_lock
and that needs to be dealt with.
The key observation is that wakeup can be moved to any point before
dropping ->d_lock.
As a first step to solve this, move the wake up outside of the
hlist_bl_lock() held section.
This is safe because:
Waiters get inserted into ->d_wait only after they'd taken ->d_lock
and observed DCACHE_PAR_LOOKUP in flags. As long as they are
woken up (and evicted from the queue) between the moment __d_lookup_done()
has removed DCACHE_PAR_LOOKUP and dropping ->d_lock, we are safe,
since the waitqueue ->d_wait points to won't get destroyed without
having __d_lookup_done(dentry) called (under ->d_lock).
->d_wait is set only by d_alloc_parallel() and only in case when
it returns a freshly allocated in-lookup dentry. Whenever that happens,
we are guaranteed that __d_lookup_done() will be called for resulting
dentry (under ->d_lock) before the wq in question gets destroyed.
With two exceptions wq lives in call frame of the caller of
d_alloc_parallel() and we have an explicit d_lookup_done() on the
resulting in-lookup dentry before we leave that frame.
One of those exceptions is nfs_call_unlink(), where wq is embedded into
(dynamically allocated) struct nfs_unlinkdata. It is destroyed in
nfs_async_unlink_release() after an explicit d_lookup_done() on the
dentry wq went into.
Remaining exception is d_add_ci(). There wq is what we'd found in
->d_wait of d_add_ci() argument. Callers of d_add_ci() are two
instances of ->d_lookup() and they must have been given an in-lookup
dentry. Which means that they'd been called by __lookup_slow() or
lookup_open(), with wq in the call frame of one of those.
Result of d_alloc_parallel() in d_add_ci() is fed to
d_splice_alias(), which either returns non-NULL (and d_add_ci() does
d_lookup_done()) or feeds dentry to __d_add() that will do
__d_lookup_done() under ->d_lock. That concludes the analysis.
Let __d_lookup_unhash():
1) Lock the lookup hash and clear DCACHE_PAR_LOOKUP
2) Unhash the dentry
3) Retrieve and clear dentry::d_wait
4) Unlock the hash and return the retrieved waitqueue head pointer
5) Let the caller handle the wake up.
6) Rename __d_lookup_done() to __d_lookup_unhash_wake() to enforce
build failures for OOT code that used __d_lookup_done() and is not
aware of the new return value.
This does not yet solve the PREEMPT_RT problem completely because
preemption is still disabled due to i_dir_seq being held for write. This
will be addressed in subsequent steps.
An alternative solution would be to switch the waitqueue to a simple
waitqueue, but aside of Linus not being a fan of them, moving the wake up
closer to the place where dentry::lock is unlocked reduces lock contention
time for the woken up waiter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20220613140712.77932-3-bigeasy@linutronix.de
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
similar to d_find_alias(inode), except that
* the caller must be holding rcu_read_lock()
* inode must not be freed until matching rcu_read_unlock()
* result is *NOT* pinned and can only be dereferenced until
the matching rcu_read_unlock().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Originally we used the term "encrypted name" or "ciphertext name" to
mean the encoded filename that is shown when an encrypted directory is
listed without its key. But these terms are ambiguous since they also
mean the filename stored on-disk. "Encrypted name" is especially
ambiguous since it could also be understood to mean "this filename is
encrypted on-disk", similar to "encrypted file".
So we've started calling these encoded names "no-key names" instead.
Therefore, rename DCACHE_ENCRYPTED_NAME to DCACHE_NOKEY_NAME to avoid
confusion about what this flag means.
Link: https://lore.kernel.org/r/20200924042624.98439-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-19-a.darwish@linutronix.de
DCACHE_DONTCACHE indicates a dentry should not be cached on final
dput().
Also add a helper function to mark DCACHE_DONTCACHE on all dentries
pointing to a specific inode when that inode is being set I_DONTCACHE.
This facilitates dropping dentry references to inodes sooner which
require eviction to swap S_DAX mode.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are 4 callers; two proceed to check if result is positive and
fail with ENOENT if it isn't; one (in handle_lookup_down()) is
guaranteed to yield positive and one (in lookup_fast()) is _preceded_
by positivity check.
However, follow_managed() on a negative dentry is a (fairly cheap)
no-op on anything other than autofs. And negative autofs dentries
are never hashed, so lookup_fast() is not going to run into one
of those. Moreover, successful follow_managed() on a _positive_
dentry never yields a negative one (and we significantly rely upon
that in callers of lookup_fast()).
In other words, we can easily transpose the positivity check and
the call of follow_managed() in lookup_fast(). And that allows
to fold the positivity check *into* follow_managed(), simplifying
life for the code downstream of its calls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are 3 remaining files without an extension inside the fs docs
dir.
Manually convert them to ReST.
In the case of the nfs/exporting.rst file, as the nfs docs
aren't ported yet, I opted to convert and add a :orphan: there,
with should be removed when it gets added into a nfs-specific
part of the fs documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
A recent documentation conversion renamed this file but forgot
to update the links.
Fixes: af96c1e304 ("docs: filesystems: vfs: Convert vfs.txt to RST")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull fscrypt updates from Ted Ts'o:
"Clean up fscrypt's dcache revalidation support, and other
miscellaneous cleanups"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: cache decrypted symlink target in ->i_link
vfs: use READ_ONCE() to access ->i_link
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext
fscrypt: only set dentry_operations on ciphertext dentries
fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory
fscrypt: fix race allowing rename() and link() of ciphertext dentries
fscrypt: clean up and improve dentry revalidation
fscrypt: use READ_ONCE() to access ->i_crypt_info
fscrypt: remove WARN_ON_ONCE() when decryption fails
fscrypt: drop inode argument from fscrypt_get_ctx()
Make various improvements to fscrypt dentry revalidation:
- Don't try to handle the case where the per-directory key is removed,
as this can't happen without the inode (and dentries) being evicted.
- Flag ciphertext dentries rather than plaintext dentries, since it's
ciphertext dentries that need the special handling.
- Avoid doing unnecessary work for non-ciphertext dentries.
- When revalidating ciphertext dentries, try to set up the directory's
i_crypt_info to make sure the key is really still absent, rather than
invalidating all negative dentries as the previous code did. An old
comment suggested we can't do this for locking reasons, but AFAICT
this comment was outdated and it actually works fine.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No modular uses since introducion of alloc_file_pseudo(),
and the only non-modular user not in alloc_file_pseudo()
had actually been wrong - should've been d_alloc_anon().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For lockless accesses to dentries we don't have pinned we rely
(among other things) upon having an RCU delay between dropping
the last reference and actually freeing the memory.
On the other hand, for things like pipes and sockets we neither
do that kind of lockless access, nor want to deal with the
overhead of an RCU delay every time a socket gets closed.
So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags
made sure it would happen. We tried to avoid setting it unless
we knew we need it. Unfortunately, that had led to recurring
class of bugs, in which we missed the need to set it.
We only really need it for dentries that are created by
d_alloc_pseudo(), so let's not bother with trying to be smart -
just make having an RCU delay the default. The ones that do
*not* get it set the replacement flag (DCACHE_NORCU) and we'd
better use that sparingly. d_alloc_pseudo() is the only
such user right now.
FWIW, the race that finally prompted that switch had been
between __lock_parent() of immediate subdirectory of what's
currently the root of a disconnected tree (e.g. from
open-by-handle in progress) racing with d_splice_alias()
elsewhere picking another alias for the same inode, either
on outright corrupted fs image, or (in case of open-by-handle
on NFS) that subdirectory having been just moved on server.
It's not easy to hit, so the sky is not falling, but that's
not the first race on similar missed cases and the logics
for settinf DCACHE_RCUACCESS has gotten ridiculously
convoluted.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The current dentry number tracking code doesn't distinguish between
positive & negative dentries. It just reports the total number of
dentries in the LRU lists.
As excessive number of negative dentries can have an impact on system
performance, it will be wise to track the number of positive and
negative dentries separately.
This patch adds tracking for the total number of negative dentries in
the system LRU lists and reports it in the 5th field in the
/proc/sys/fs/dentry-state file. The number, however, does not include
negative dentries that are in flight but not in the LRU yet as well as
those in the shrinker lists which are on the way out anyway.
The number of positive dentries in the LRU lists can be roughly found by
subtracting the number of negative dentries from the unused count.
Matthew Wilcox had confirmed that since the introduction of the
dentry_stat structure in 2.1.60, the dummy array was there, probably for
future extension. They were not replacements of pre-existing fields.
So no sane applications that read the value of /proc/sys/fs/dentry-state
will do dummy thing if the last 2 fields of the sysctl parameter are not
zero. IOW, it will be safe to use one of the dummy array entry for
negative dentry count.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
