Update TDC tests with cases varifying ability of TC to install or delete
batches of skbedit actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
Update TDC tests with cases varifying ability of TC to install or delete
batches of vlan actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that shutdown never works, and at the same time document how
I tested to came to the conclusion that currently reuse is not possible.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kselftest fixes from Shuah Khan:
"A fix to the Kselftest framework to save and restore errno and a fix
to livepatch to push and pop dynamic debug config"
* tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: push and pop dynamic debug config
kselftest: save-and-restore errno to allow for %m formatting
Given the increasing number of BPF selftests, it makes sense to
reduce the time to execute these tests. The ping parameters are
adjusted to reduce the time from measures 9 sec to approx 2.8 sec.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric)
create two wrapper test scripts, that start the test_xdp_vlan.sh script
with these modes.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP.
This selftest was created together with a fix for generic XDP, in commit
2972495699 ("net: fix generic XDP to handle if eth header was
mangled"). And was suppose to catch if generic XDP was broken again.
The tests are using veth and assumed that veth driver didn't support
native driver XDP, thus it used the (ip link set) 'xdp' attach that fell
back to generic-XDP. But veth gained native-XDP support in 948d4f214f
("veth: Add driver XDP"), which caused this test script to use
native-XDP.
Fixes: 948d4f214f ("veth: Add driver XDP")
Fixes: 97396ff0bc ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":
% grep cgroup /proc/mounts
cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.
After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.
Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.
Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c88 ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb317 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, using "%m" in a ksft_* format string can result in strange
output because the errno value wasn't saved before calling other libc
functions. The solution is to simply save and restore the errno before
we format the user-supplied format string.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull pidfd fixes from Christian Brauner:
"This makes setting the exit_state in exit_notify() consistent after
fixing the pidfd polling race pre-rc1. Related to the race fix, this
adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
races.
Last, this removes an obsolete comment from the pidfd tests"
* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: make setting exit_state consistent
pidfd: Add warning if exit_state is 0 during notification
pidfd: remove obsolete comments from test
Pull kselftest fixes from Shuah Khan:
"Minor fixes to tests and one major fix to livepatch test to add skip
handling to avoid false fail reports when livepatch is disabled"
* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: add test skip handling
selftests: mlxsw: Fix typo in qos_mc_aware.sh
selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
selftests: kmod: Fix typo in kmod.sh
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix segfault in libbpf, from Andrii.
2) fix gso_segs access, from Eric.
3) tls/sockmap fixes, from Jakub and John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6_flowlabel and ipv6_flowlabel_mgr are missing from
gitignore. Quentin points out that the original
commit 3fb321fde2 ("selftests/net: ipv6 flowlabel")
did add ignore entries, they are just missing the "ipv6_"
prefix.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a skip() message function that stops the test, logs an explanation,
and sets the "skip" return code (4).
Before loading a livepatch self-test kernel module, first verify that
we've built and installed it by running a 'modprobe --dry-run'. This
should catch a few environment issues, including !CONFIG_LIVEPATCH and
!CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new
skip() function.
Reported-by: Jiri Benc <jbenc@redhat.com>
Suggested-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use BPF_REG_1 for source and destination of gso_segs read,
to exercise "bpf: fix access to skb_shared_info->gso_segs" fix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The TC filters used in the test do not work with veth devices because the
outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw
netdevs since the hardware always looks at "The first Ethertype that
does not point to either: VLAN, CNTAG or configurable Ethertype".
Fix this by matching on the VLAN ID instead, but on the ingress side.
The reason why this is not performed at egress is explained in the
commit cited below.
Fixes: 541ad323db ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test did not enable IPv4 forwarding during its setup phase, which
causes the test to fail on machines where IPv4 forwarding is disabled.
Fixes: 54818c4c4b ("selftests: forwarding: Test multipath tunneling")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
