ATMEL: fix nand ecc support

So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc
and hardware).

Set ecc mode in the boards to soft as currently in the driver.

Move platform data to a common header
include/linux/platform_data/atmel_nand.h

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: David Woodhouse <dwmw2@infradead.org>

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.bus_width_16	= 0,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= afeb9260_nand_partition,
 	.num_parts	= ARRAY_SIZE(afeb9260_nand_partition),
 	.det_pin	= -EINVAL,

arch/arm/mach-at91/board-cam60.c

@@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA9,
 	.enable_pin	= AT91_PIN_PA7,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= cam60_nand_partition,
 	.num_parts	= ARRAY_SIZE(cam60_nand_partition),
 };

arch/arm/mach-at91/board-cpu9krea.c

@@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
 	.enable_pin	= AT91_PIN_PC14,
 	.bus_width_16	= 0,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 #ifdef CONFIG_MACH_CPU9260

arch/arm/mach-at91/board-dt.c

@@ -47,6 +47,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {

arch/arm/mach-at91/board-kb9202.c

@@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC29,
 	.enable_pin	= AT91_PIN_PC28,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= kb9202_nand_partition,
 	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
 };

arch/arm/mach-at91/board-neocore926.c

@@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
 	.rdy_pin		= AT91_PIN_PB19,
 	.rdy_pin_active_low	= 1,
 	.enable_pin		= AT91_PIN_PD15,
+	.ecc_mode		= NAND_ECC_SOFT,
 	.parts			= neocore926_nand_partition,
 	.num_parts		= ARRAY_SIZE(neocore926_nand_partition),
 	.det_pin		= -EINVAL,

arch/arm/mach-at91/board-qil-a9260.c

@@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-rm9200dk.c

@@ -150,6 +150,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 	.det_pin	= AT91_PIN_PB1,
 	.rdy_pin	= AT91_PIN_PC2,
 	.enable_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= dk_nand_partition,
 	.num_parts	= ARRAY_SIZE(dk_nand_partition),
 };

arch/arm/mach-at91/board-sam9-l9260.c

@@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9260ek.c

@@ -181,6 +181,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9261ek.c

@@ -187,6 +187,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9263ek.c

@@ -187,6 +187,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9g20ek.c

@@ -166,6 +166,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -148,6 +148,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9rlek.c

@@ -94,6 +94,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PD17,
 	.enable_pin	= AT91_PIN_PB6,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-snapper9260.c

@@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
 	.bus_width_16	= 0,
 	.enable_pin	= -EINVAL,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {

arch/arm/mach-at91/board-stamp9g20.c

@@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = {
 	.enable_pin	= AT91_PIN_PC14,
 	.bus_width_16	= 0,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {

arch/arm/mach-at91/board-usb-a926x.c

@@ -198,6 +198,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-yl-9200.c

@@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC14,	/* R/!B (Sheet10) */
 	.enable_pin	= AT91_PIN_PC15,	/* !CE  (Sheet10) */
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= yl9200_nand_partition,
 	.num_parts	= ARRAY_SIZE(yl9200_nand_partition),
 };

arch/arm/mach-at91/include/mach/board.h

@@ -41,6 +41,7 @@
 #include <sound/atmel-ac97c.h>
 #include <linux/serial.h>
 #include <linux/platform_data/macb.h>
+#include <linux/platform_data/atmel.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -98,20 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
- /* NAND / SmartMedia */
-struct atmel_nand_data {
-	int		enable_pin;	/* chip enable */
-	int		det_pin;	/* card detect */
-	int		rdy_pin;	/* ready/busy */
-	u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	u8		correction_cap; /* PMECC correction capability */
-	u16		sector_size;    /* Sector size for PMECC */
-	struct mtd_partition *parts;
-	unsigned int	num_parts;
-};
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/