ptp: Add a driver for InES time stamping IP core.

The InES at the ZHAW offers a PTP time stamping IP core.  The FPGA
logic recognizes and time stamps PTP frames on the MII bus.  This
patch adds a driver for the core along with a device tree binding to
allow hooking the driver to MII buses.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ptp/Kconfig

@@ -89,6 +89,16 @@ config DP83640_PHY
 	  In order for this to work, your MAC driver must also
 	  implement the skb_tx_timestamp() function.
 
+config PTP_1588_CLOCK_INES
+	tristate "ZHAW InES PTP time stamping IP core"
+	depends on NETWORK_PHY_TIMESTAMPING
+	depends on PHYLIB
+	depends on PTP_1588_CLOCK
+	help
+	  This driver adds support for using the ZHAW InES 1588 IP
+	  core.  This clock is only useful if the MII bus of your MAC
+	  is wired up to the core.
+
 config PTP_1588_CLOCK_PCH
 	tristate "Intel PCH EG20T as PTP clock"
 	depends on X86_32 || COMPILE_TEST

drivers/ptp/Makefile

@@ -6,6 +6,7 @@
 ptp-y					:= ptp_clock.o ptp_chardev.o ptp_sysfs.o
 obj-$(CONFIG_PTP_1588_CLOCK)		+= ptp.o
 obj-$(CONFIG_PTP_1588_CLOCK_DTE)	+= ptp_dte.o
+obj-$(CONFIG_PTP_1588_CLOCK_INES)	+= ptp_ines.o
 obj-$(CONFIG_PTP_1588_CLOCK_IXP46X)	+= ptp_ixp46x.o
 obj-$(CONFIG_PTP_1588_CLOCK_PCH)	+= ptp_pch.o
 obj-$(CONFIG_PTP_1588_CLOCK_KVM)	+= ptp_kvm.o