diff --git a/ssv6x5x-sw.bin b/ssv6x5x-sw.bin new file mode 100755 index 0000000..0341a7e Binary files /dev/null and b/ssv6x5x-sw.bin differ diff --git a/ssv6x5x-wifi.cfg b/ssv6x5x-wifi.cfg new file mode 100755 index 0000000..bab2f9f --- /dev/null +++ b/ssv6x5x-wifi.cfg @@ -0,0 +1,121 @@ +############################################################ +# ROCKCHIP RK3X28 & RK322X +# WIFI-CONFIGURATION +################################################## + +# hw_mac = 00:a5:b5:30:36:20 +# hw_mac_2 = 00:a5:b5:30:36:21 +################################################## +# Firmware setting +# Priority.1 insmod parameter "cfgfirmwarepath" +# Priority.2 firmware_path +# Priority.3 default firmware +################################################## +firmware_path = /lib/firmware/ + +############################################################ +# MAC address +# +# Priority 1. From wifi.cfg [ hw_mac & hw_mac_2 ] +# +# Priority 2. From e-fuse[ON/OFF switch by wifi.cfg] +# +# Priority 3. From insert module parameter +# +# Priority 4. From external file path +# path only support some special charater "_" ":" "/" "." "-" +# +# Priority 5. Default[Software mode] +# +# 0. => 00:33:33:33:33:33 +# 1. => Always random +# 2. => First random and write to file[Default path mac_output_path] +# +############################################################ +#ignore_efuse_mac = 1 +#mac_address_path = /xxxx/xxxx +#mac_address_mode = 2 +#mac_output_path = /data/wifimac + +################################################## +# Hardware setting +# +#volt regulator(DCDC-0 LDO-1) +# +################################################## +xtal_clock = 24 +volt_regulator = 1 + +################################################## +# Default channel after wifi on +# value range: [1 ~ 14] +################################################## +#def_chan = 6 +################################################## +# Hardware Capability Settings: +################################################## +hw_cap_ampdu_rx = on +hw_cap_ampdu_tx = on +hw_cap_tdls = on +hw_cap_5ghz = on + +use_wpa2_only = 1 +################################################## +# TX power level setting [0-14] +# The larger the number the smaller the TX power +# 0 - The maximum power +# 1 level = -0.5db +# +# 6051Z .. 4 or 4 +# 6051Q .. 2 or 5 +# 6051P .. 0 or 0 +# +################################################## +wifi_tx_gain_level_b = 2 +wifi_tx_gain_level_gn = 5 + +################################################## +# Import extenal configuration(UP to 64 groups) +# example: +# register = CE010010:91919191 +# register = 00CC0010:00091919 +################################################## + +################################################## +# The AP RSSI signal is less than -88dbm complement signal to -88dbm +################################################## +#beacon_rssi_minimal = 88 + +################################################## +# Direct Ack Threshold Settings: +################################################## +directly_ack_low_threshold = 64 +directly_ack_high_threshold = 512 + +################################################## +# txrxboost Threshold Settings: +################################################## +#txrxboost_low_threshold = 999 +#txrxboost_high_threshold = 999 + +# Disable the p2p0 interface. We don't really need it for general purpose +# uses, but can be enabled back if required. +hw_cap_p2p = off + +online_reset = 0x00f + +################################################# +# DOMAIN_FCC = 0, +# DOMAIN_china, +# DOMAIN_ETSI, +# DOMAIN_Japan, +# DOMAIN_Japan2, +# DOMAIN_Israel, +# DOMAIN_Korea, +# DOMAIN_North_America, +# DOMAIN_Singapore, +# DOMAIN_Taiwan, +# DOMAIN_other = 0xff, +################################################ + +# domain = 1