armbian/documentation
0
0
Fork 0
mirror of https://github.com/armbian/documentation.git synced 2026-01-06 10:13:36 -08:00
Code Issues Packages Projects Releases Wiki Activity
Files
fc444b083d40bb97de75e9a86823972dc55c5852
documentation/docs/WifiPerformance.md
igorpecovnik fc444b083d Automatic wireless performance tests
2025-05-28 17:01:54 +02:00

74 KiB
Raw Blame History

comments
comments
true

Testing the speed of wireless adapters

All wireless adapters were tested under consistent conditions - each positioned in close proximity (1-2m) and connected to the same wireless access point (AP). The adapters utilized various interface types, including USB, SDIO, and PCI, to evaluate performance across different hardware configurations.


[![Support Autotests](/images/support-autotest.png)](#contribute)

Test Equipment

Software and Infrastructure

Methodology

Overview of the WiFi performance test process:

  1. ⚡ Power On Devices
    └─ Embedded WiFi-capable devices and USB wireless adapters are powered on.

  2. 🌐 Configure Wireless Connection
    └─ Devices are configured to connect to a predefined access point (SSID).

  3. 📶 Connect to WiFi Network
    └─ Network connectivity is validated to ensure the device is routable.

  4. 📊 Measure Performance (iperf3)
    ├─ Perform reverse (-R) and forward iperf3 tests
    └─ Measure throughput and link quality.

  5. 🔍 Collect System & Network Info
    ├─ Extract link details (e.g. bitrate, signal strength)
    └─ Record system version, kernel, architecture.

  6. 🔁 Restore Wired Network
    └─ Reapply original routes and configuration.

  7. ☁️ Upload Test Results
    └─ Summary, logs, and system info are uploaded as artifacts.

  8. 📴 Power Off Devices
    └─ All test devices are safely powered down after testing completes.

Devices Under Tests

This section presents the performance test results, including key metrics and technical details from the test execution.
Test Date: 2025-05-28 14:49 UTC

AC

Broadcom 4345

OS: Armbian v25.2.2, 6.12.15-current-bcm2711
Chipset Class Average forward speed Average reverse speed
BCM4345 AC 226 Mbits/sec 264 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.131 port 36947 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 24.9 MBytes 209 Mbits/sec
[ 5] 1.00-2.00 sec 26.9 MBytes 225 Mbits/sec
[ 5] 2.00-3.00 sec 25.1 MBytes 210 Mbits/sec
[ 5] 3.00-4.00 sec 28.3 MBytes 237 Mbits/sec
[ 5] 4.00-5.00 sec 26.8 MBytes 225 Mbits/sec
[ 5] 5.00-6.00 sec 27.2 MBytes 228 Mbits/sec
[ 5] 6.00-7.00 sec 26.9 MBytes 226 Mbits/sec
[ 5] 7.00-8.00 sec 27.2 MBytes 228 Mbits/sec
[ 5] 8.00-9.00 sec 26.9 MBytes 226 Mbits/sec
[ 5] 9.00-10.00 sec 26.9 MBytes 226 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.02 sec 270 MBytes 226 Mbits/sec 773 sender [ 5] 0.00-10.00 sec 267 MBytes 224 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.131 port 54545 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 33.8 MBytes 283 Mbits/sec 0 979 KBytes
[ 5] 1.00-2.00 sec 30.0 MBytes 252 Mbits/sec 0 1.07 MBytes
[ 5] 2.00-3.00 sec 31.2 MBytes 262 Mbits/sec 0 1.19 MBytes
[ 5] 3.00-4.00 sec 31.2 MBytes 262 Mbits/sec 0 1.33 MBytes
[ 5] 4.00-5.00 sec 31.2 MBytes 262 Mbits/sec 0 1.33 MBytes
[ 5] 5.00-6.00 sec 31.2 MBytes 262 Mbits/sec 0 1.39 MBytes
[ 5] 6.00-7.00 sec 32.5 MBytes 273 Mbits/sec 0 1.39 MBytes
[ 5] 7.00-8.00 sec 31.2 MBytes 262 Mbits/sec 0 1.46 MBytes
[ 5] 8.00-9.00 sec 31.2 MBytes 262 Mbits/sec 0 1.46 MBytes
[ 5] 9.00-10.00 sec 31.2 MBytes 262 Mbits/sec 0 1.46 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 315 MBytes 264 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 312 MBytes 262 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 5500 RX: 154671 bytes (411 packets) TX: 89165 bytes (523 packets) signal: -37 dBm rx bitrate: 433.3 MBit/s tx bitrate: 433.3 MBit/s

```

Compex WLE900VX

OS: Armbian v25.08.0-trunk, 6.12.28-edge-mvebu
Chipset Class Average forward speed Average reverse speed
QCA9880 AC 118 Mbits/sec 107 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.126 port 41633 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 13.3 MBytes 112 Mbits/sec
[ 5] 1.00-2.00 sec 13.9 MBytes 117 Mbits/sec
[ 5] 2.00-3.00 sec 13.9 MBytes 117 Mbits/sec
[ 5] 3.00-4.00 sec 13.7 MBytes 115 Mbits/sec
[ 5] 4.00-5.00 sec 13.8 MBytes 115 Mbits/sec
[ 5] 5.00-6.00 sec 12.9 MBytes 109 Mbits/sec
[ 5] 6.00-7.00 sec 14.4 MBytes 121 Mbits/sec
[ 5] 7.00-8.00 sec 13.6 MBytes 114 Mbits/sec
[ 5] 8.00-9.00 sec 14.0 MBytes 118 Mbits/sec
[ 5] 9.00-10.00 sec 13.8 MBytes 116 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.03 sec 141 MBytes 118 Mbits/sec 5 sender [ 5] 0.00-10.00 sec 137 MBytes 115 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.126 port 49285 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 12.6 MBytes 106 Mbits/sec 0 516 KBytes
[ 5] 1.00-2.00 sec 12.4 MBytes 104 Mbits/sec 0 571 KBytes
[ 5] 2.00-3.00 sec 13.0 MBytes 109 Mbits/sec 0 641 KBytes
[ 5] 3.00-4.00 sec 12.1 MBytes 101 Mbits/sec 0 641 KBytes
[ 5] 4.00-5.00 sec 13.5 MBytes 114 Mbits/sec 0 779 KBytes
[ 5] 5.00-6.00 sec 12.8 MBytes 107 Mbits/sec 0 779 KBytes
[ 5] 6.00-7.00 sec 12.5 MBytes 105 Mbits/sec 0 779 KBytes
[ 5] 7.00-8.00 sec 12.5 MBytes 105 Mbits/sec 0 905 KBytes
[ 5] 8.00-9.00 sec 13.1 MBytes 110 Mbits/sec 0 905 KBytes
[ 5] 9.00-10.00 sec 12.7 MBytes 106 Mbits/sec 0 905 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 127 MBytes 107 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 125 MBytes 105 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 2462 RX: 112340 bytes (497 packets) TX: 58510 bytes (236 packets) signal: -28 dBm rx bitrate: 144.4 MBit/s MCS 15 short GI

```

EDUP EP-AC1681

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL88x2BU AC 95.0 Mbits/sec 53.9 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.181 port 50439 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 10.2 MBytes 85.9 Mbits/sec
[ 5] 1.00-2.00 sec 10.4 MBytes 87.0 Mbits/sec
[ 5] 2.00-3.00 sec 11.0 MBytes 92.3 Mbits/sec
[ 5] 3.00-4.00 sec 11.1 MBytes 93.3 Mbits/sec
[ 5] 4.00-5.00 sec 11.6 MBytes 97.5 Mbits/sec
[ 5] 5.00-6.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5] 6.00-7.00 sec 11.6 MBytes 97.5 Mbits/sec
[ 5] 7.00-8.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5] 8.00-9.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 9.00-10.00 sec 11.8 MBytes 98.6 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 113 MBytes 95.0 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 113 MBytes 94.5 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.181 port 48349 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 7.38 MBytes 61.8 Mbits/sec 0 311 KBytes
[ 5] 1.00-2.00 sec 6.75 MBytes 56.6 Mbits/sec 0 587 KBytes
[ 5] 2.00-3.00 sec 6.50 MBytes 54.5 Mbits/sec 0 716 KBytes
[ 5] 3.00-4.00 sec 7.38 MBytes 61.9 Mbits/sec 0 754 KBytes
[ 5] 4.00-5.00 sec 5.50 MBytes 46.1 Mbits/sec 0 754 KBytes
[ 5] 5.00-6.00 sec 7.00 MBytes 58.7 Mbits/sec 0 792 KBytes
[ 5] 6.00-7.00 sec 5.50 MBytes 46.1 Mbits/sec 0 843 KBytes
[ 5] 7.00-8.00 sec 7.00 MBytes 58.7 Mbits/sec 0 843 KBytes
[ 5] 8.00-9.00 sec 5.62 MBytes 47.2 Mbits/sec 0 885 KBytes
[ 5] 9.00-10.00 sec 5.62 MBytes 47.2 Mbits/sec 0 885 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 64.2 MBytes 53.9 Mbits/sec 0 sender [ 5] 0.00-10.05 sec 61.6 MBytes 51.4 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 188015 bytes (464 packets) TX: 100288 bytes (498 packets) signal: -40 dBm rx bitrate: 130.0 MBit/s MCS 15 tx bitrate: 144.4 MBit/s MCS 15 short GI

Realtek 8811AU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8812AU AC 153 Mbits/sec 198 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.182 port 48835 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 16.8 MBytes 140 Mbits/sec
[ 5] 1.00-2.00 sec 18.2 MBytes 153 Mbits/sec
[ 5] 2.00-3.00 sec 18.6 MBytes 156 Mbits/sec
[ 5] 3.00-4.00 sec 18.2 MBytes 153 Mbits/sec
[ 5] 4.00-5.00 sec 18.2 MBytes 153 Mbits/sec
[ 5] 5.00-6.00 sec 18.2 MBytes 153 Mbits/sec
[ 5] 6.00-7.00 sec 18.4 MBytes 154 Mbits/sec
[ 5] 7.00-8.00 sec 18.1 MBytes 152 Mbits/sec
[ 5] 8.00-9.00 sec 17.8 MBytes 149 Mbits/sec
[ 5] 9.00-10.00 sec 17.6 MBytes 148 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 183 MBytes 153 Mbits/sec 134 sender [ 5] 0.00-10.00 sec 180 MBytes 151 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.182 port 58527 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 25.1 MBytes 211 Mbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 23.6 MBytes 198 Mbits/sec 0 711 KBytes
[ 5] 2.00-3.00 sec 22.6 MBytes 190 Mbits/sec 0 711 KBytes
[ 5] 3.00-4.00 sec 23.8 MBytes 199 Mbits/sec 0 711 KBytes
[ 5] 4.00-5.00 sec 23.6 MBytes 198 Mbits/sec 0 711 KBytes
[ 5] 5.00-6.00 sec 23.5 MBytes 197 Mbits/sec 0 796 KBytes
[ 5] 6.00-7.00 sec 23.8 MBytes 199 Mbits/sec 0 796 KBytes
[ 5] 7.00-8.00 sec 22.2 MBytes 187 Mbits/sec 0 796 KBytes
[ 5] 8.00-9.00 sec 23.9 MBytes 200 Mbits/sec 0 796 KBytes
[ 5] 9.00-10.00 sec 23.6 MBytes 198 Mbits/sec 0 841 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 236 MBytes 198 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 233 MBytes 195 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 signal: -42 dBm tx bitrate: 434.0 MBit/s

Realtek 8812AU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8812AU AC 148 Mbits/sec 269 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.183 port 49865 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 15.5 MBytes 130 Mbits/sec
[ 5] 1.00-2.00 sec 17.9 MBytes 150 Mbits/sec
[ 5] 2.00-3.00 sec 17.8 MBytes 149 Mbits/sec
[ 5] 3.00-4.00 sec 17.9 MBytes 150 Mbits/sec
[ 5] 4.00-5.00 sec 17.5 MBytes 147 Mbits/sec
[ 5] 5.00-6.00 sec 17.6 MBytes 148 Mbits/sec
[ 5] 6.00-7.00 sec 17.2 MBytes 145 Mbits/sec
[ 5] 7.00-8.00 sec 17.2 MBytes 145 Mbits/sec
[ 5] 8.00-9.00 sec 17.6 MBytes 148 Mbits/sec
[ 5] 9.00-10.00 sec 17.8 MBytes 149 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 177 MBytes 148 Mbits/sec 8 sender [ 5] 0.00-10.00 sec 174 MBytes 146 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.183 port 41219 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 34.2 MBytes 287 Mbits/sec 0 979 KBytes
[ 5] 1.00-2.00 sec 31.5 MBytes 264 Mbits/sec 0 1.13 MBytes
[ 5] 2.00-3.00 sec 33.1 MBytes 278 Mbits/sec 0 1.13 MBytes
[ 5] 3.00-4.00 sec 31.5 MBytes 264 Mbits/sec 0 1.20 MBytes
[ 5] 4.00-5.00 sec 31.4 MBytes 263 Mbits/sec 0 1.20 MBytes
[ 5] 5.00-6.00 sec 31.6 MBytes 266 Mbits/sec 0 1.20 MBytes
[ 5] 6.00-7.00 sec 32.2 MBytes 270 Mbits/sec 0 1.20 MBytes
[ 5] 7.00-8.00 sec 32.6 MBytes 274 Mbits/sec 0 1.20 MBytes
[ 5] 8.00-9.00 sec 30.9 MBytes 259 Mbits/sec 0 1.33 MBytes
[ 5] 9.00-10.00 sec 32.0 MBytes 268 Mbits/sec 0 1.33 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 321 MBytes 269 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 319 MBytes 267 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 signal: -33 dBm tx bitrate: 867.0 MBit/s

Realtek 8814AU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8814AU AC 153 Mbits/sec 23.8 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.184 port 39333 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 17.4 MBytes 146 Mbits/sec
[ 5] 1.00-2.00 sec 18.0 MBytes 151 Mbits/sec
[ 5] 2.00-3.00 sec 18.1 MBytes 152 Mbits/sec
[ 5] 3.00-4.00 sec 18.0 MBytes 151 Mbits/sec
[ 5] 4.00-5.00 sec 18.0 MBytes 151 Mbits/sec
[ 5] 5.00-6.00 sec 17.9 MBytes 150 Mbits/sec
[ 5] 6.00-7.00 sec 18.0 MBytes 151 Mbits/sec
[ 5] 7.00-8.00 sec 17.8 MBytes 149 Mbits/sec
[ 5] 8.00-9.00 sec 18.0 MBytes 151 Mbits/sec
[ 5] 9.00-10.00 sec 18.0 MBytes 151 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 183 MBytes 153 Mbits/sec 120 sender [ 5] 0.00-10.00 sec 179 MBytes 150 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.184 port 43963 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 3.50 MBytes 29.3 Mbits/sec 0 208 KBytes
[ 5] 1.00-2.00 sec 3.25 MBytes 27.3 Mbits/sec 0 331 KBytes
[ 5] 2.00-3.00 sec 2.88 MBytes 24.1 Mbits/sec 0 358 KBytes
[ 5] 3.00-4.00 sec 2.88 MBytes 24.1 Mbits/sec 0 376 KBytes
[ 5] 4.00-5.00 sec 3.00 MBytes 25.2 Mbits/sec 0 376 KBytes
[ 5] 5.00-6.00 sec 2.38 MBytes 19.9 Mbits/sec 0 376 KBytes
[ 5] 6.00-7.00 sec 3.00 MBytes 25.2 Mbits/sec 0 376 KBytes
[ 5] 7.00-8.00 sec 2.25 MBytes 18.9 Mbits/sec 0 376 KBytes
[ 5] 8.00-9.00 sec 3.00 MBytes 25.2 Mbits/sec 0 376 KBytes
[ 5] 9.00-10.00 sec 2.25 MBytes 18.9 Mbits/sec 0 376 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 28.4 MBytes 23.8 Mbits/sec 0 sender [ 5] 0.00-10.10 sec 27.2 MBytes 22.6 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 signal: -38 dBm tx bitrate: 867.0 MBit/s

Realtek 8821CU #1

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8821CU AC 123 Mbits/sec 211 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.185 port 57159 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 6.88 MBytes 57.6 Mbits/sec
[ 5] 1.00-2.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 2.00-3.00 sec 15.9 MBytes 133 Mbits/sec
[ 5] 3.00-4.00 sec 16.0 MBytes 134 Mbits/sec
[ 5] 4.00-5.00 sec 15.9 MBytes 133 Mbits/sec
[ 5] 5.00-6.00 sec 15.9 MBytes 133 Mbits/sec
[ 5] 6.00-7.00 sec 16.0 MBytes 134 Mbits/sec
[ 5] 7.00-8.00 sec 15.9 MBytes 133 Mbits/sec
[ 5] 8.00-9.00 sec 15.9 MBytes 133 Mbits/sec
[ 5] 9.00-10.00 sec 16.0 MBytes 134 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 147 MBytes 123 Mbits/sec 2 sender [ 5] 0.00-10.00 sec 146 MBytes 123 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.185 port 50357 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 25.8 MBytes 216 Mbits/sec 0 543 KBytes
[ 5] 1.00-2.00 sec 25.6 MBytes 215 Mbits/sec 0 638 KBytes
[ 5] 2.00-3.00 sec 26.0 MBytes 218 Mbits/sec 0 741 KBytes
[ 5] 3.00-4.00 sec 24.8 MBytes 208 Mbits/sec 0 741 KBytes
[ 5] 4.00-5.00 sec 25.0 MBytes 210 Mbits/sec 0 768 KBytes
[ 5] 5.00-6.00 sec 24.9 MBytes 209 Mbits/sec 0 776 KBytes
[ 5] 6.00-7.00 sec 24.9 MBytes 209 Mbits/sec 0 776 KBytes
[ 5] 7.00-8.00 sec 24.9 MBytes 209 Mbits/sec 0 776 KBytes
[ 5] 8.00-9.00 sec 24.8 MBytes 208 Mbits/sec 0 776 KBytes
[ 5] 9.00-10.00 sec 24.8 MBytes 208 Mbits/sec 0 776 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 251 MBytes 211 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 248 MBytes 208 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 194101 bytes (390 packets) TX: 99340 bytes (457 packets) signal: -41 dBm rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1 tx bitrate: 433.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 1

Realtek 8821CU #2

OS: Armbian v25.5.1, 6.12.28-current-meson64
Chipset Class Average forward speed Average reverse speed
RTL8821CU AC 275 Mbits/sec 257 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.163 port 54087 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 27.2 MBytes 228 Mbits/sec
[ 5] 1.00-2.00 sec 33.5 MBytes 281 Mbits/sec
[ 5] 2.00-3.00 sec 32.8 MBytes 275 Mbits/sec
[ 5] 3.00-4.00 sec 33.1 MBytes 278 Mbits/sec
[ 5] 4.00-5.00 sec 32.5 MBytes 273 Mbits/sec
[ 5] 5.00-6.00 sec 32.9 MBytes 276 Mbits/sec
[ 5] 6.00-7.00 sec 33.5 MBytes 281 Mbits/sec
[ 5] 7.00-8.00 sec 33.2 MBytes 279 Mbits/sec
[ 5] 8.00-9.00 sec 33.1 MBytes 278 Mbits/sec
[ 5] 9.00-10.00 sec 33.2 MBytes 279 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 328 MBytes 275 Mbits/sec 130 sender [ 5] 0.00-10.00 sec 325 MBytes 273 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.163 port 44557 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 33.5 MBytes 281 Mbits/sec 0 1.64 MBytes
[ 5] 1.00-2.00 sec 30.2 MBytes 254 Mbits/sec 0 1.84 MBytes
[ 5] 2.00-3.00 sec 29.6 MBytes 249 Mbits/sec 0 2.15 MBytes
[ 5] 3.00-4.00 sec 31.2 MBytes 262 Mbits/sec 0 2.36 MBytes
[ 5] 4.00-5.00 sec 30.1 MBytes 253 Mbits/sec 0 2.36 MBytes
[ 5] 5.00-6.00 sec 30.5 MBytes 256 Mbits/sec 0 2.36 MBytes
[ 5] 6.00-7.00 sec 30.8 MBytes 258 Mbits/sec 0 2.36 MBytes
[ 5] 7.00-8.00 sec 30.0 MBytes 252 Mbits/sec 0 2.36 MBytes
[ 5] 8.00-9.00 sec 29.5 MBytes 247 Mbits/sec 0 2.36 MBytes
[ 5] 9.00-10.00 sec 30.4 MBytes 255 Mbits/sec 0 2.36 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 306 MBytes 257 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 304 MBytes 254 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ```

```

Realtek 8822CE

OS: Armbian v25.2.3, 6.12.21-current-rockchip64
Chipset Class Average forward speed Average reverse speed
RTL8822CE AC 476 Mbits/sec 645 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.127 port 53729 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 59.9 MBytes 502 Mbits/sec
[ 5] 1.00-2.00 sec 59.3 MBytes 497 Mbits/sec
[ 5] 2.00-3.00 sec 56.7 MBytes 476 Mbits/sec
[ 5] 3.00-4.00 sec 57.1 MBytes 479 Mbits/sec
[ 5] 4.00-5.00 sec 58.3 MBytes 489 Mbits/sec
[ 5] 5.00-6.00 sec 57.0 MBytes 478 Mbits/sec
[ 5] 6.00-7.00 sec 54.5 MBytes 457 Mbits/sec
[ 5] 7.00-8.00 sec 54.3 MBytes 456 Mbits/sec
[ 5] 8.00-9.00 sec 52.9 MBytes 443 Mbits/sec
[ 5] 9.00-10.00 sec 54.5 MBytes 457 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 568 MBytes 476 Mbits/sec 527 sender [ 5] 0.00-10.00 sec 564 MBytes 474 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.127 port 58093 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 77.0 MBytes 645 Mbits/sec 0 7.51 MBytes
[ 5] 1.00-2.00 sec 77.5 MBytes 650 Mbits/sec 0 7.51 MBytes
[ 5] 2.00-3.00 sec 77.5 MBytes 651 Mbits/sec 0 7.51 MBytes
[ 5] 3.00-4.00 sec 75.0 MBytes 629 Mbits/sec 145 3.75 MBytes
[ 5] 4.00-5.00 sec 77.5 MBytes 650 Mbits/sec 0 3.75 MBytes
[ 5] 5.00-6.00 sec 78.8 MBytes 661 Mbits/sec 0 3.75 MBytes
[ 5] 6.00-7.00 sec 77.5 MBytes 650 Mbits/sec 0 3.75 MBytes
[ 5] 7.00-8.00 sec 77.5 MBytes 650 Mbits/sec 0 3.75 MBytes
[ 5] 8.00-9.00 sec 75.0 MBytes 629 Mbits/sec 310 1.93 MBytes
[ 5] 9.00-10.00 sec 76.2 MBytes 640 Mbits/sec 0 1.98 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 770 MBytes 645 Mbits/sec 455 sender [ 5] 0.00-10.02 sec 769 MBytes 643 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 5500 RX: 149379 bytes (548 packets) TX: 61579 bytes (222 packets) signal: -32 dBm rx bitrate: 585.0 MBit/s VHT-MCS 7 80MHz VHT-NSS 2 tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2

```

AX

Comfast CF953AX

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
MT7921AU AX 110 Mbits/sec 149 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.186 port 36693 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 12.6 MBytes 106 Mbits/sec
[ 5] 1.00-2.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 2.00-3.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 3.00-4.00 sec 12.9 MBytes 108 Mbits/sec
[ 5] 4.00-5.00 sec 12.8 MBytes 107 Mbits/sec
[ 5] 5.00-6.00 sec 12.8 MBytes 107 Mbits/sec
[ 5] 6.00-7.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 7.00-8.00 sec 12.9 MBytes 108 Mbits/sec
[ 5] 8.00-9.00 sec 12.8 MBytes 107 Mbits/sec
[ 5] 9.00-10.00 sec 12.9 MBytes 108 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 131 MBytes 110 Mbits/sec 187 sender [ 5] 0.00-10.00 sec 128 MBytes 108 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.186 port 49719 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 18.9 MBytes 158 Mbits/sec 0 554 KBytes
[ 5] 1.00-2.00 sec 17.4 MBytes 146 Mbits/sec 0 585 KBytes
[ 5] 2.00-3.00 sec 17.9 MBytes 150 Mbits/sec 0 617 KBytes
[ 5] 3.00-4.00 sec 18.4 MBytes 154 Mbits/sec 0 690 KBytes
[ 5] 4.00-5.00 sec 16.9 MBytes 142 Mbits/sec 0 725 KBytes
[ 5] 5.00-6.00 sec 18.4 MBytes 154 Mbits/sec 24 318 KBytes
[ 5] 6.00-7.00 sec 16.6 MBytes 139 Mbits/sec 0 598 KBytes
[ 5] 7.00-8.00 sec 18.5 MBytes 155 Mbits/sec 0 653 KBytes
[ 5] 8.00-9.00 sec 16.9 MBytes 142 Mbits/sec 0 690 KBytes
[ 5] 9.00-10.00 sec 18.0 MBytes 151 Mbits/sec 0 717 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 178 MBytes 149 Mbits/sec 24 sender [ 5] 0.00-10.01 sec 174 MBytes 146 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 41920 bytes (144 packets) TX: 51366 bytes (200 packets) signal: -39 dBm rx bitrate: 1200.9 MBit/s 80MHz HE-MCS 11 HE-NSS 2 HE-GI 0 HE-DCM 0 tx bitrate: 1200.9 MBit/s 80MHz HE-MCS 11 HE-NSS 2 HE-GI 0 HE-DCM 0

Intel AX200

OS: Armbian v25.2.2, 6.12.15-current-rockchip64
Chipset Class Average forward speed Average reverse speed
AX200 AX 816 Mbits/sec 571 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.116 port 35841 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 98.8 MBytes 828 Mbits/sec
[ 5] 1.00-2.00 sec 91.4 MBytes 767 Mbits/sec
[ 5] 2.00-3.00 sec 96.0 MBytes 805 Mbits/sec
[ 5] 3.00-4.00 sec 88.0 MBytes 738 Mbits/sec
[ 5] 4.00-5.00 sec 90.1 MBytes 756 Mbits/sec
[ 5] 5.00-6.00 sec 99.6 MBytes 836 Mbits/sec
[ 5] 6.00-7.00 sec 98.6 MBytes 827 Mbits/sec
[ 5] 7.00-8.00 sec 102 MBytes 860 Mbits/sec
[ 5] 8.00-9.00 sec 101 MBytes 848 Mbits/sec
[ 5] 9.00-10.00 sec 104 MBytes 872 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 973 MBytes 816 Mbits/sec 255 sender [ 5] 0.00-10.00 sec 970 MBytes 814 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.116 port 60461 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 92.1 MBytes 772 Mbits/sec 557 737 KBytes
[ 5] 1.00-2.00 sec 89.8 MBytes 753 Mbits/sec 328 479 KBytes
[ 5] 2.00-3.00 sec 75.6 MBytes 634 Mbits/sec 156 351 KBytes
[ 5] 3.00-4.00 sec 76.8 MBytes 644 Mbits/sec 102 294 KBytes
[ 5] 4.00-5.00 sec 39.9 MBytes 334 Mbits/sec 0 450 KBytes
[ 5] 5.00-6.00 sec 41.9 MBytes 351 Mbits/sec 0 564 KBytes
[ 5] 6.00-7.00 sec 61.6 MBytes 517 Mbits/sec 23 489 KBytes
[ 5] 7.00-8.00 sec 75.1 MBytes 630 Mbits/sec 77 469 KBytes
[ 5] 8.00-9.00 sec 69.1 MBytes 580 Mbits/sec 100 215 KBytes
[ 5] 9.00-10.00 sec 59.2 MBytes 497 Mbits/sec 0 468 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 681 MBytes 571 Mbits/sec 1343 sender [ 5] 0.00-10.00 sec 678 MBytes 569 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 66879 bytes (227 packets) TX: 82439 bytes (295 packets) signal: -30 dBm rx bitrate: 2401.9 MBit/s 160MHz HE-MCS 11 HE-NSS 2 HE-GI 0 HE-DCM 0 tx bitrate: 2041.6 MBit/s 160MHz HE-MCS 11 HE-NSS 2 HE-GI 2 HE-DCM 0

N

Alfa RT3572

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RT3572 N 96.6 Mbits/sec 66.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.188 port 37161 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 9.12 MBytes 76.5 Mbits/sec
[ 5] 1.00-2.00 sec 10.6 MBytes 89.1 Mbits/sec
[ 5] 2.00-3.00 sec 11.1 MBytes 93.3 Mbits/sec
[ 5] 3.00-4.00 sec 11.6 MBytes 97.6 Mbits/sec
[ 5] 4.00-5.00 sec 11.4 MBytes 95.4 Mbits/sec
[ 5] 5.00-6.00 sec 11.0 MBytes 92.3 Mbits/sec
[ 5] 6.00-7.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5] 7.00-8.00 sec 11.8 MBytes 98.6 Mbits/sec
[ 5] 8.00-9.00 sec 11.8 MBytes 98.6 Mbits/sec
[ 5] 9.00-10.00 sec 11.6 MBytes 97.5 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 115 MBytes 96.6 Mbits/sec 33 sender [ 5] 0.00-10.00 sec 112 MBytes 93.5 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.188 port 41073 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 8.50 MBytes 71.2 Mbits/sec 0 229 KBytes
[ 5] 1.00-2.00 sec 8.12 MBytes 68.2 Mbits/sec 0 270 KBytes
[ 5] 2.00-3.00 sec 7.62 MBytes 64.0 Mbits/sec 0 300 KBytes
[ 5] 3.00-4.00 sec 8.12 MBytes 68.2 Mbits/sec 0 315 KBytes
[ 5] 4.00-5.00 sec 7.62 MBytes 64.0 Mbits/sec 0 315 KBytes
[ 5] 5.00-6.00 sec 7.62 MBytes 63.9 Mbits/sec 0 315 KBytes
[ 5] 6.00-7.00 sec 7.88 MBytes 66.1 Mbits/sec 0 315 KBytes
[ 5] 7.00-8.00 sec 7.75 MBytes 65.0 Mbits/sec 0 354 KBytes
[ 5] 8.00-9.00 sec 8.00 MBytes 67.1 Mbits/sec 0 421 KBytes
[ 5] 9.00-10.00 sec 7.88 MBytes 65.9 Mbits/sec 0 421 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 79.1 MBytes 66.4 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 76.9 MBytes 64.5 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 111511 bytes (465 packets) TX: 66801 bytes (266 packets) signal: -17 dBm rx bitrate: 240.0 MBit/s MCS 13 40MHz short GI tx bitrate: 300.0 MBit/s MCS 15 40MHz short GI

Broadcom 43430

OS: Armbian v25.5.1, 6.12.23-current-sunxi
Chipset Class Average forward speed Average reverse speed
BCM43430 N 44.7 Mbits/sec 42.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.164 port 41125 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 4.13 MBytes 34.7 Mbits/sec
[ 5] 1.00-2.00 sec 4.69 MBytes 39.4 Mbits/sec
[ 5] 2.00-3.00 sec 4.46 MBytes 37.5 Mbits/sec
[ 5] 3.00-4.00 sec 4.98 MBytes 41.8 Mbits/sec
[ 5] 4.00-5.00 sec 5.41 MBytes 45.4 Mbits/sec
[ 5] 5.00-6.00 sec 5.25 MBytes 44.0 Mbits/sec
[ 5] 6.00-7.00 sec 5.33 MBytes 44.7 Mbits/sec
[ 5] 7.00-8.00 sec 5.35 MBytes 44.9 Mbits/sec
[ 5] 8.00-9.00 sec 5.13 MBytes 43.0 Mbits/sec
[ 5] 9.00-10.00 sec 5.24 MBytes 44.0 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 53.4 MBytes 44.7 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 50.0 MBytes 41.9 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.164 port 40661 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 5.52 MBytes 46.3 Mbits/sec 0 232 KBytes
[ 5] 1.00-2.00 sec 4.97 MBytes 41.7 Mbits/sec 0 273 KBytes
[ 5] 2.00-3.00 sec 5.22 MBytes 43.8 Mbits/sec 0 290 KBytes
[ 5] 3.00-4.00 sec 5.03 MBytes 42.2 Mbits/sec 0 290 KBytes
[ 5] 4.00-5.00 sec 5.03 MBytes 42.2 Mbits/sec 0 307 KBytes
[ 5] 5.00-6.00 sec 4.91 MBytes 41.2 Mbits/sec 0 307 KBytes
[ 5] 6.00-7.00 sec 5.03 MBytes 42.2 Mbits/sec 0 307 KBytes
[ 5] 7.00-8.00 sec 5.10 MBytes 42.7 Mbits/sec 0 307 KBytes
[ 5] 8.00-9.00 sec 4.91 MBytes 41.2 Mbits/sec 0 307 KBytes
[ 5] 9.00-10.00 sec 4.85 MBytes 40.7 Mbits/sec 0 307 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 50.6 MBytes 42.4 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 50.0 MBytes 41.8 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 2462 RX: 63428 bytes (165 packets) TX: 57268 bytes (286 packets) signal: -52 dBm rx bitrate: 72.2 MBit/s tx bitrate: 65.0 MBit/s

```

Broadcom 43455

OS: Armbian v25.2.3, 6.12.22-current-x86
Chipset Class Average forward speed Average reverse speed
BCM43455 N 54.9 Mbits/sec 54.0 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.120 port 47067 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 5.35 MBytes 44.8 Mbits/sec
[ 5] 1.00-2.00 sec 6.04 MBytes 50.7 Mbits/sec
[ 5] 2.00-3.00 sec 6.42 MBytes 53.9 Mbits/sec
[ 5] 3.00-4.00 sec 6.72 MBytes 56.4 Mbits/sec
[ 5] 4.00-5.00 sec 6.06 MBytes 50.9 Mbits/sec
[ 5] 5.00-6.00 sec 7.27 MBytes 60.9 Mbits/sec
[ 5] 6.00-7.00 sec 7.31 MBytes 61.3 Mbits/sec
[ 5] 7.00-8.00 sec 6.61 MBytes 55.5 Mbits/sec
[ 5] 8.00-9.00 sec 5.68 MBytes 47.7 Mbits/sec
[ 5] 9.00-10.00 sec 6.35 MBytes 53.3 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.05 sec 65.8 MBytes 54.9 Mbits/sec 9 sender [ 5] 0.00-10.00 sec 63.8 MBytes 53.5 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.120 port 45433 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 6.85 MBytes 57.4 Mbits/sec 0 216 KBytes
[ 5] 1.00-2.00 sec 5.59 MBytes 46.9 Mbits/sec 0 249 KBytes
[ 5] 2.00-3.00 sec 6.90 MBytes 57.9 Mbits/sec 0 290 KBytes
[ 5] 3.00-4.00 sec 7.46 MBytes 62.6 Mbits/sec 0 339 KBytes
[ 5] 4.00-5.00 sec 5.78 MBytes 48.5 Mbits/sec 0 339 KBytes
[ 5] 5.00-6.00 sec 7.08 MBytes 59.4 Mbits/sec 0 443 KBytes
[ 5] 6.00-7.00 sec 6.40 MBytes 53.7 Mbits/sec 0 443 KBytes
[ 5] 7.00-8.00 sec 6.46 MBytes 54.2 Mbits/sec 0 443 KBytes
[ 5] 8.00-9.00 sec 6.34 MBytes 53.2 Mbits/sec 0 443 KBytes
[ 5] 9.00-10.00 sec 5.47 MBytes 45.9 Mbits/sec 35 310 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 64.3 MBytes 54.0 Mbits/sec 35 sender [ 5] 0.00-10.01 sec 62.4 MBytes 52.3 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 5500 RX: 63956 bytes (209 packets) TX: 56508 bytes (251 packets) signal: -54 dBm rx bitrate: 433.3 MBit/s tx bitrate: 433.3 MBit/s

```

Ralink RT5370

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RT5370 N 46.8 Mbits/sec 50.5 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.189 port 52827 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 4.00 MBytes 33.5 Mbits/sec
[ 5] 1.00-2.00 sec 5.38 MBytes 45.1 Mbits/sec
[ 5] 2.00-3.00 sec 5.50 MBytes 46.1 Mbits/sec
[ 5] 3.00-4.00 sec 5.25 MBytes 44.0 Mbits/sec
[ 5] 4.00-5.00 sec 5.62 MBytes 47.2 Mbits/sec
[ 5] 5.00-6.00 sec 5.50 MBytes 46.1 Mbits/sec
[ 5] 6.00-7.00 sec 5.38 MBytes 45.1 Mbits/sec
[ 5] 7.00-8.00 sec 5.38 MBytes 45.1 Mbits/sec
[ 5] 8.00-9.00 sec 5.38 MBytes 45.0 Mbits/sec
[ 5] 9.00-10.00 sec 5.25 MBytes 44.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 55.9 MBytes 46.8 Mbits/sec 8 sender [ 5] 0.00-10.00 sec 52.6 MBytes 44.1 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.189 port 43877 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 5.50 MBytes 46.1 Mbits/sec 0 320 KBytes
[ 5] 1.00-2.00 sec 7.38 MBytes 61.9 Mbits/sec 0 550 KBytes
[ 5] 2.00-3.00 sec 6.88 MBytes 57.6 Mbits/sec 5 506 KBytes
[ 5] 3.00-4.00 sec 5.62 MBytes 47.2 Mbits/sec 0 576 KBytes
[ 5] 4.00-5.00 sec 5.62 MBytes 47.2 Mbits/sec 0 636 KBytes
[ 5] 5.00-6.00 sec 5.62 MBytes 47.2 Mbits/sec 0 673 KBytes
[ 5] 6.00-7.00 sec 5.50 MBytes 46.2 Mbits/sec 0 701 KBytes
[ 5] 7.00-8.00 sec 7.00 MBytes 58.7 Mbits/sec 0 717 KBytes
[ 5] 8.00-9.00 sec 5.50 MBytes 46.2 Mbits/sec 0 724 KBytes
[ 5] 9.00-10.00 sec 5.62 MBytes 47.2 Mbits/sec 0 724 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 60.2 MBytes 50.5 Mbits/sec 5 sender [ 5] 0.00-10.00 sec 57.8 MBytes 48.4 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 104301 bytes (445 packets) TX: 55932 bytes (216 packets) signal: -27 dBm rx bitrate: 72.2 MBit/s MCS 7 short GI tx bitrate: 72.2 MBit/s MCS 7 short GI

Ralink RT5572

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RT5572 N 85.0 Mbits/sec 67.0 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.190 port 58389 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 9.12 MBytes 76.5 Mbits/sec
[ 5] 1.00-2.00 sec 9.75 MBytes 81.7 Mbits/sec
[ 5] 2.00-3.00 sec 10.0 MBytes 84.0 Mbits/sec
[ 5] 3.00-4.00 sec 10.0 MBytes 83.8 Mbits/sec
[ 5] 4.00-5.00 sec 10.0 MBytes 83.9 Mbits/sec
[ 5] 5.00-6.00 sec 9.88 MBytes 82.9 Mbits/sec
[ 5] 6.00-7.00 sec 10.1 MBytes 85.0 Mbits/sec
[ 5] 7.00-8.00 sec 10.0 MBytes 83.7 Mbits/sec
[ 5] 8.00-9.00 sec 10.1 MBytes 85.0 Mbits/sec
[ 5] 9.00-10.00 sec 10.0 MBytes 83.9 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 101 MBytes 85.0 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 99.0 MBytes 83.0 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.190 port 54813 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 8.88 MBytes 74.1 Mbits/sec 0 291 KBytes
[ 5] 1.00-2.00 sec 8.75 MBytes 73.7 Mbits/sec 0 365 KBytes
[ 5] 2.00-3.00 sec 8.00 MBytes 67.1 Mbits/sec 0 426 KBytes
[ 5] 3.00-4.00 sec 7.00 MBytes 58.7 Mbits/sec 0 426 KBytes
[ 5] 4.00-5.00 sec 7.88 MBytes 66.1 Mbits/sec 0 426 KBytes
[ 5] 5.00-6.00 sec 7.75 MBytes 65.0 Mbits/sec 0 426 KBytes
[ 5] 6.00-7.00 sec 7.88 MBytes 66.0 Mbits/sec 0 426 KBytes
[ 5] 7.00-8.00 sec 7.88 MBytes 66.1 Mbits/sec 0 426 KBytes
[ 5] 8.00-9.00 sec 8.00 MBytes 67.1 Mbits/sec 0 426 KBytes
[ 5] 9.00-10.00 sec 7.88 MBytes 66.0 Mbits/sec 0 426 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 79.9 MBytes 67.0 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 77.9 MBytes 65.3 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 231320 bytes (725 packets) TX: 121316 bytes (597 packets) signal: -34 dBm rx bitrate: 270.0 MBit/s MCS 14 40MHz short GI tx bitrate: 300.0 MBit/s MCS 15 40MHz short GI

Realtek 8188CUS

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8192CU N 45.5 Mbits/sec 30.1 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.191 port 44361 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 5.12 MBytes 42.9 Mbits/sec
[ 5] 1.00-2.00 sec 5.25 MBytes 44.0 Mbits/sec
[ 5] 2.00-3.00 sec 5.25 MBytes 44.0 Mbits/sec
[ 5] 3.00-4.00 sec 5.38 MBytes 45.1 Mbits/sec
[ 5] 4.00-5.00 sec 5.25 MBytes 44.0 Mbits/sec
[ 5] 5.00-6.00 sec 5.00 MBytes 41.9 Mbits/sec
[ 5] 6.00-7.00 sec 5.12 MBytes 43.0 Mbits/sec
[ 5] 7.00-8.00 sec 5.12 MBytes 43.0 Mbits/sec
[ 5] 8.00-9.00 sec 5.00 MBytes 41.9 Mbits/sec
[ 5] 9.00-10.00 sec 5.25 MBytes 44.0 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 54.2 MBytes 45.5 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 51.8 MBytes 43.4 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.191 port 58915 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 4.25 MBytes 35.6 Mbits/sec 0 214 KBytes
[ 5] 1.00-2.00 sec 3.75 MBytes 31.5 Mbits/sec 0 286 KBytes
[ 5] 2.00-3.00 sec 4.12 MBytes 34.6 Mbits/sec 0 365 KBytes
[ 5] 3.00-4.00 sec 3.12 MBytes 26.2 Mbits/sec 0 382 KBytes
[ 5] 4.00-5.00 sec 3.88 MBytes 32.5 Mbits/sec 0 382 KBytes
[ 5] 5.00-6.00 sec 3.12 MBytes 26.2 Mbits/sec 0 382 KBytes
[ 5] 6.00-7.00 sec 3.25 MBytes 27.3 Mbits/sec 0 382 KBytes
[ 5] 7.00-8.00 sec 4.00 MBytes 33.6 Mbits/sec 0 382 KBytes
[ 5] 8.00-9.00 sec 3.25 MBytes 27.3 Mbits/sec 0 382 KBytes
[ 5] 9.00-10.00 sec 3.12 MBytes 26.2 Mbits/sec 0 382 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 35.9 MBytes 30.1 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 34.2 MBytes 28.6 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 101086 bytes (372 packets) TX: 61142 bytes (227 packets) signal: -36 dBm rx bitrate: 65.0 MBit/s MCS 7 tx bitrate: 72.2 MBit/s MCS 7 short GI

Realtek 8723BS

OS: Armbian v25.2.1, 6.12.13-current-rockchip
Chipset Class Average forward speed Average reverse speed
RTL8723BS N 35.5 Mbits/sec 48.1 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.134 port 53759 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 5.29 MBytes 44.4 Mbits/sec
[ 5] 1.00-2.00 sec 4.20 MBytes 35.2 Mbits/sec
[ 5] 2.00-3.00 sec 3.22 MBytes 27.0 Mbits/sec
[ 5] 3.00-4.00 sec 4.38 MBytes 36.7 Mbits/sec
[ 5] 4.00-5.00 sec 3.58 MBytes 30.0 Mbits/sec
[ 5] 5.00-6.00 sec 4.96 MBytes 41.6 Mbits/sec
[ 5] 6.00-7.00 sec 4.70 MBytes 39.4 Mbits/sec
[ 5] 7.00-8.00 sec 3.04 MBytes 25.5 Mbits/sec
[ 5] 8.00-9.00 sec 3.96 MBytes 33.2 Mbits/sec
[ 5] 9.00-10.00 sec 1.35 MBytes 11.3 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 42.4 MBytes 35.5 Mbits/sec 7 sender [ 5] 0.00-10.00 sec 38.7 MBytes 32.4 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.134 port 48721 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 6.19 MBytes 51.9 Mbits/sec 0 376 KBytes
[ 5] 1.00-2.00 sec 5.65 MBytes 47.4 Mbits/sec 0 417 KBytes
[ 5] 2.00-3.00 sec 5.90 MBytes 49.5 Mbits/sec 0 440 KBytes
[ 5] 3.00-4.00 sec 5.47 MBytes 45.9 Mbits/sec 0 467 KBytes
[ 5] 4.00-5.00 sec 5.65 MBytes 47.4 Mbits/sec 0 467 KBytes
[ 5] 5.00-6.00 sec 5.59 MBytes 46.9 Mbits/sec 0 496 KBytes
[ 5] 6.00-7.00 sec 5.65 MBytes 47.4 Mbits/sec 0 535 KBytes
[ 5] 7.00-8.00 sec 5.78 MBytes 48.5 Mbits/sec 0 535 KBytes
[ 5] 8.00-9.00 sec 5.28 MBytes 44.3 Mbits/sec 0 535 KBytes
[ 5] 9.00-10.00 sec 6.15 MBytes 51.6 Mbits/sec 0 566 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 57.3 MBytes 48.1 Mbits/sec 0 sender [ 5] 0.00-10.05 sec 55.9 MBytes 46.7 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ```

```

Realtek 8723BU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8723BU N 1.67 Mbits/sec 17.7 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.192 port 48165 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 256 KBytes 2.09 Mbits/sec
[ 5] 1.00-2.00 sec 128 KBytes 1.05 Mbits/sec
[ 5] 2.00-3.00 sec 256 KBytes 2.10 Mbits/sec
[ 5] 3.00-4.00 sec 128 KBytes 1.05 Mbits/sec
[ 5] 4.00-5.00 sec 128 KBytes 1.05 Mbits/sec
[ 5] 5.00-6.00 sec 256 KBytes 2.10 Mbits/sec
[ 5] 6.00-7.00 sec 128 KBytes 1.05 Mbits/sec
[ 5] 7.00-8.00 sec 256 KBytes 2.10 Mbits/sec
[ 5] 8.00-9.00 sec 128 KBytes 1.05 Mbits/sec
[ 5] 9.00-10.00 sec 128 KBytes 1.05 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.07 sec 2.00 MBytes 1.67 Mbits/sec 75 sender [ 5] 0.00-10.00 sec 1.75 MBytes 1.47 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.192 port 33845 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 2.00 MBytes 16.8 Mbits/sec 0 115 KBytes
[ 5] 1.00-2.00 sec 2.38 MBytes 19.9 Mbits/sec 0 202 KBytes
[ 5] 2.00-3.00 sec 2.00 MBytes 16.8 Mbits/sec 0 260 KBytes
[ 5] 3.00-4.00 sec 1.88 MBytes 15.7 Mbits/sec 0 346 KBytes
[ 5] 4.00-5.00 sec 2.25 MBytes 18.9 Mbits/sec 0 437 KBytes
[ 5] 5.00-6.00 sec 2.88 MBytes 24.1 Mbits/sec 0 549 KBytes
[ 5] 6.00-7.00 sec 2.38 MBytes 19.9 Mbits/sec 0 632 KBytes
[ 5] 7.00-8.00 sec 1.25 MBytes 10.5 Mbits/sec 0 714 KBytes
[ 5] 8.00-9.00 sec 2.75 MBytes 23.1 Mbits/sec 0 810 KBytes
[ 5] 9.00-10.00 sec 1.38 MBytes 11.5 Mbits/sec 0 844 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 21.1 MBytes 17.7 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 18.4 MBytes 15.4 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 85181 bytes (369 packets) TX: 56055 bytes (199 packets) signal: -44 dBm rx bitrate: 52.0 MBit/s MCS 5 tx bitrate: 72.2 MBit/s MCS 7 short GI

UWE 5622

OS: Armbian v25.5.0-trunk.538, 6.12.23-current-sunxi64
Chipset Class Average forward speed Average reverse speed
UWE5622 N 141 Mbits/sec 140 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.128 port 39925 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 15.7 MBytes 132 Mbits/sec
[ 5] 1.00-2.00 sec 16.6 MBytes 139 Mbits/sec
[ 5] 2.00-3.00 sec 16.8 MBytes 141 Mbits/sec
[ 5] 3.00-4.00 sec 16.6 MBytes 140 Mbits/sec
[ 5] 4.00-5.00 sec 14.7 MBytes 123 Mbits/sec
[ 5] 5.00-6.00 sec 18.4 MBytes 155 Mbits/sec
[ 5] 6.00-7.00 sec 16.7 MBytes 140 Mbits/sec
[ 5] 7.00-8.00 sec 16.6 MBytes 139 Mbits/sec
[ 5] 8.00-9.00 sec 16.8 MBytes 141 Mbits/sec
[ 5] 9.00-10.00 sec 16.9 MBytes 142 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 169 MBytes 141 Mbits/sec 350 sender [ 5] 0.00-10.00 sec 166 MBytes 139 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.128 port 32803 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 18.7 MBytes 157 Mbits/sec 0 421 KBytes
[ 5] 1.00-2.00 sec 16.0 MBytes 134 Mbits/sec 0 421 KBytes
[ 5] 2.00-3.00 sec 16.7 MBytes 140 Mbits/sec 0 421 KBytes
[ 5] 3.00-4.00 sec 16.8 MBytes 141 Mbits/sec 0 421 KBytes
[ 5] 4.00-5.00 sec 16.8 MBytes 141 Mbits/sec 0 421 KBytes
[ 5] 5.00-6.00 sec 15.9 MBytes 133 Mbits/sec 0 421 KBytes
[ 5] 6.00-7.00 sec 16.7 MBytes 140 Mbits/sec 0 421 KBytes
[ 5] 7.00-8.00 sec 16.7 MBytes 140 Mbits/sec 0 421 KBytes
[ 5] 8.00-9.00 sec 16.7 MBytes 140 Mbits/sec 0 421 KBytes
[ 5] 9.00-10.00 sec 15.9 MBytes 133 Mbits/sec 0 421 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 167 MBytes 140 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 165 MBytes 138 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500 RX: 3143165524 bytes (2598523 packets)

Xradio XR819

OS: Armbian v25.5.1, 6.12.23-current-sunxi
Chipset Class Average forward speed Average reverse speed
XR819 N 19.3 Mbits/sec 12.1 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.196 port 50459 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 1.91 MBytes 16.1 Mbits/sec
[ 5] 1.00-2.00 sec 1.60 MBytes 13.4 Mbits/sec
[ 5] 2.00-3.00 sec 1.90 MBytes 16.0 Mbits/sec
[ 5] 3.00-4.00 sec 2.04 MBytes 17.1 Mbits/sec
[ 5] 4.00-5.00 sec 1.99 MBytes 16.7 Mbits/sec
[ 5] 5.00-6.00 sec 2.07 MBytes 17.4 Mbits/sec
[ 5] 6.00-7.00 sec 2.33 MBytes 19.5 Mbits/sec
[ 5] 7.00-8.00 sec 2.41 MBytes 20.2 Mbits/sec
[ 5] 8.00-9.00 sec 2.18 MBytes 18.3 Mbits/sec
[ 5] 9.00-10.00 sec 2.45 MBytes 20.5 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 23.2 MBytes 19.3 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 20.9 MBytes 17.5 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.196 port 46033 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.31 MBytes 11.0 Mbits/sec 5 36.8 KBytes
[ 5] 1.00-2.00 sec 1.40 MBytes 11.8 Mbits/sec 1 42.4 KBytes
[ 5] 2.00-3.00 sec 1.51 MBytes 12.6 Mbits/sec 0 65.0 KBytes
[ 5] 3.00-4.00 sec 1.62 MBytes 13.6 Mbits/sec 0 80.6 KBytes
[ 5] 4.00-5.00 sec 1.24 MBytes 10.4 Mbits/sec 3 56.6 KBytes
[ 5] 5.00-6.00 sec 1.49 MBytes 12.5 Mbits/sec 0 74.9 KBytes
[ 5] 6.00-7.00 sec 1.49 MBytes 12.5 Mbits/sec 0 84.8 KBytes
[ 5] 7.00-8.00 sec 1.49 MBytes 12.5 Mbits/sec 0 91.9 KBytes
[ 5] 8.00-9.00 sec 1.37 MBytes 11.5 Mbits/sec 0 97.6 KBytes
[ 5] 9.00-10.00 sec 1.49 MBytes 12.5 Mbits/sec 0 102 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 14.4 MBytes 12.1 Mbits/sec 9 sender [ 5] 0.00-10.04 sec 14.1 MBytes 11.8 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 2462 RX: 60150 bytes (180 packets) TX: 62764 bytes (257 packets) signal: -30 dBm rx bitrate: 6.0 MBit/s tx bitrate: 52.0 MBit/s MCS 5

```

Contribute

  • Assist us in developing and maintaining our testing system: Your expertise can help us enhance and optimize our test infrastructure. By contributing your skills, you can play a key role in ensuring the accuracy and reliability of our test results.

  • Donate hardware: Your contribution of new hardware, whether it’s a wireless adapter or any other equipment, helps us expand our testing capabilities. We’re specifically looking for new wireless adapters that haven’t yet been added to our system. Your donation can directly impact the scope and depth of our tests.

  • Join our team: Become part of our passionate and dedicated team. We’re looking for individuals who share our vision and are eager to contribute to the development of innovative testing solutions. Whether you have technical expertise or simply a willingness to learn, there’s a place for you here!

Other resources

Reference in New Issue View Git Blame Copy Permalink