armbian/documentation
0
0
Fork 0
mirror of https://github.com/armbian/documentation.git synced 2026-01-06 10:13:36 -08:00
Code Issues Packages Projects Releases Wiki Activity
Files
830b8ccb44996205c5c7a7c0d5e95b5ca78cef40
documentation/docs/WifiPerformance.md
igorpecovnik 830b8ccb44 Automatic wireless performance tests
2025-05-23 18:25:32 +02:00

70 KiB
Raw Blame History

comments
comments
true

Testing the speed of wireless adapters

All wireless adapters were tested under consistent conditions - each positioned in close proximity (1-2m) and connected to the same wireless access point (AP). The adapters utilized various interface types, including USB, SDIO, and PCI, to evaluate performance across different hardware configurations.


[![Support Autotests](/images/support-autotest.png)](#contribute)

Test Equipment

Software and Infrastructure

Methodology

Overview of the WiFi performance test process:

  1. ⚡ Power On Devices
    └─ Embedded WiFi-capable devices and USB wireless adapters are powered on.

  2. 🌐 Configure Wireless Connection
    └─ Devices are configured to connect to a predefined access point (SSID).

  3. 📶 Connect to WiFi Network
    └─ Network connectivity is validated to ensure the device is routable.

  4. 📊 Measure Performance (iperf3)
    ├─ Perform reverse (-R) and forward iperf3 tests
    └─ Measure throughput and link quality.

  5. 🔍 Collect System & Network Info
    ├─ Extract link details (e.g. bitrate, signal strength)
    └─ Record system version, kernel, architecture.

  6. 🔁 Restore Wired Network
    └─ Reapply original routes and configuration.

  7. ☁️ Upload Test Results
    └─ Summary, logs, and system info are uploaded as artifacts.

  8. 📴 Power Off Devices
    └─ All test devices are safely powered down after testing completes.

Devices Under Tests

This section presents the performance test results, including key metrics and technical details from the test execution.
Test Date: 2025-05-23 14:40 UTC

AC

Broadcom 4345

OS: Armbian v25.2.2, 6.12.15-current-bcm2711
Chipset Class Average forward speed Average reverse speed
BCM4345 AC 58.8 Mbits/sec 59.9 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.131 port 52297 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 6.39 MBytes 53.6 Mbits/sec
[ 5] 1.00-2.00 sec 6.73 MBytes 56.4 Mbits/sec
[ 5] 2.00-3.00 sec 6.78 MBytes 56.9 Mbits/sec
[ 5] 3.00-4.00 sec 6.64 MBytes 55.7 Mbits/sec
[ 5] 4.00-5.00 sec 6.78 MBytes 56.8 Mbits/sec
[ 5] 5.00-6.00 sec 6.56 MBytes 55.0 Mbits/sec
[ 5] 6.00-7.00 sec 6.72 MBytes 56.4 Mbits/sec
[ 5] 7.00-8.00 sec 6.73 MBytes 56.4 Mbits/sec
[ 5] 8.00-9.00 sec 6.72 MBytes 56.4 Mbits/sec
[ 5] 9.00-10.00 sec 6.62 MBytes 55.5 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.02 sec 70.2 MBytes 58.8 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 66.7 MBytes 55.9 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.131 port 47597 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 8.83 MBytes 74.1 Mbits/sec 0 440 KBytes
[ 5] 1.00-2.00 sec 7.64 MBytes 64.1 Mbits/sec 0 591 KBytes
[ 5] 2.00-3.00 sec 7.40 MBytes 62.1 Mbits/sec 0 796 KBytes
[ 5] 3.00-4.00 sec 6.25 MBytes 52.4 Mbits/sec 0 935 KBytes
[ 5] 4.00-5.00 sec 7.50 MBytes 62.9 Mbits/sec 0 1.02 MBytes
[ 5] 5.00-6.00 sec 6.25 MBytes 52.4 Mbits/sec 0 1.18 MBytes
[ 5] 6.00-7.00 sec 7.50 MBytes 62.9 Mbits/sec 0 1.18 MBytes
[ 5] 7.00-8.00 sec 6.25 MBytes 52.4 Mbits/sec 0 1.18 MBytes
[ 5] 8.00-9.00 sec 7.50 MBytes 62.9 Mbits/sec 0 1.25 MBytes
[ 5] 9.00-10.00 sec 6.25 MBytes 52.4 Mbits/sec 0 1.26 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 71.4 MBytes 59.9 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 68.8 MBytes 57.6 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 2462 RX: 37311 bytes (142 packets) TX: 49917 bytes (196 packets) signal: -28 dBm rx bitrate: 72.2 MBit/s tx bitrate: 72.2 MBit/s

```

Compex WLE900VX

OS: Armbian v25.08.0-trunk, 6.12.28-edge-mvebu
Chipset Class Average forward speed Average reverse speed
QCA9880 AC 115 Mbits/sec 104 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.126 port 52479 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 13.2 MBytes 111 Mbits/sec
[ 5] 1.00-2.00 sec 13.7 MBytes 115 Mbits/sec
[ 5] 2.00-3.00 sec 13.5 MBytes 113 Mbits/sec
[ 5] 3.00-4.00 sec 13.7 MBytes 115 Mbits/sec
[ 5] 4.00-5.00 sec 13.7 MBytes 115 Mbits/sec
[ 5] 5.00-6.00 sec 13.4 MBytes 112 Mbits/sec
[ 5] 6.00-7.00 sec 13.6 MBytes 114 Mbits/sec
[ 5] 7.00-8.00 sec 12.4 MBytes 104 Mbits/sec
[ 5] 8.00-9.00 sec 13.4 MBytes 112 Mbits/sec
[ 5] 9.00-10.00 sec 13.5 MBytes 113 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.05 sec 138 MBytes 115 Mbits/sec 90 sender [ 5] 0.00-10.00 sec 134 MBytes 112 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.126 port 40751 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 13.0 MBytes 109 Mbits/sec 0 468 KBytes
[ 5] 1.00-2.00 sec 12.1 MBytes 101 Mbits/sec 0 540 KBytes
[ 5] 2.00-3.00 sec 12.4 MBytes 104 Mbits/sec 0 566 KBytes
[ 5] 3.00-4.00 sec 12.4 MBytes 104 Mbits/sec 0 566 KBytes
[ 5] 4.00-5.00 sec 12.2 MBytes 102 Mbits/sec 0 592 KBytes
[ 5] 5.00-6.00 sec 12.6 MBytes 105 Mbits/sec 0 655 KBytes
[ 5] 6.00-7.00 sec 12.5 MBytes 105 Mbits/sec 0 734 KBytes
[ 5] 7.00-8.00 sec 12.9 MBytes 108 Mbits/sec 0 734 KBytes
[ 5] 8.00-9.00 sec 12.4 MBytes 104 Mbits/sec 0 734 KBytes
[ 5] 9.00-10.00 sec 12.2 MBytes 102 Mbits/sec 0 734 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 124 MBytes 104 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 123 MBytes 103 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 2462 RX: 127969 bytes (552 packets) TX: 56319 bytes (243 packets) signal: -35 dBm rx bitrate: 144.4 MBit/s MCS 15 short GI

```

EDUP EP-AC1681

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL88x2BU AC 97.8 Mbits/sec 99.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.107 port 47897 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 10.4 MBytes 86.9 Mbits/sec
[ 5] 1.00-2.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5] 2.00-3.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 3.00-4.00 sec 11.6 MBytes 97.5 Mbits/sec
[ 5] 4.00-5.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 5.00-6.00 sec 11.6 MBytes 97.5 Mbits/sec
[ 5] 6.00-7.00 sec 11.8 MBytes 98.6 Mbits/sec
[ 5] 7.00-8.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 8.00-9.00 sec 11.8 MBytes 98.6 Mbits/sec
[ 5] 9.00-10.00 sec 11.8 MBytes 98.6 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 117 MBytes 97.8 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 116 MBytes 97.3 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.107 port 35515 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 14.8 MBytes 124 Mbits/sec 0 643 KBytes
[ 5] 1.00-2.00 sec 10.8 MBytes 90.2 Mbits/sec 0 675 KBytes
[ 5] 2.00-3.00 sec 12.4 MBytes 104 Mbits/sec 0 747 KBytes
[ 5] 3.00-4.00 sec 12.4 MBytes 104 Mbits/sec 0 795 KBytes
[ 5] 4.00-5.00 sec 11.1 MBytes 93.3 Mbits/sec 0 841 KBytes
[ 5] 5.00-6.00 sec 12.5 MBytes 105 Mbits/sec 0 841 KBytes
[ 5] 6.00-7.00 sec 12.6 MBytes 106 Mbits/sec 0 888 KBytes
[ 5] 7.00-8.00 sec 9.62 MBytes 80.7 Mbits/sec 0 888 KBytes
[ 5] 8.00-9.00 sec 11.2 MBytes 94.4 Mbits/sec 0 888 KBytes
[ 5] 9.00-10.00 sec 11.1 MBytes 93.3 Mbits/sec 0 888 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 118 MBytes 99.4 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 115 MBytes 96.4 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 181788 bytes (434 packets) TX: 105538 bytes (502 packets) signal: -36 dBm rx bitrate: 130.0 MBit/s MCS 15 tx bitrate: 144.4 MBit/s MCS 15 short GI

Realtek 8811AU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8812AU AC 139 Mbits/sec 106 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.119 port 38093 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 13.8 MBytes 115 Mbits/sec
[ 5] 1.00-2.00 sec 17.1 MBytes 144 Mbits/sec
[ 5] 2.00-3.00 sec 16.8 MBytes 141 Mbits/sec
[ 5] 3.00-4.00 sec 16.2 MBytes 136 Mbits/sec
[ 5] 4.00-5.00 sec 16.5 MBytes 138 Mbits/sec
[ 5] 5.00-6.00 sec 16.9 MBytes 142 Mbits/sec
[ 5] 6.00-7.00 sec 15.6 MBytes 131 Mbits/sec
[ 5] 7.00-8.00 sec 16.2 MBytes 136 Mbits/sec
[ 5] 8.00-9.00 sec 16.1 MBytes 135 Mbits/sec
[ 5] 9.00-10.00 sec 16.6 MBytes 139 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 166 MBytes 139 Mbits/sec 141 sender [ 5] 0.00-10.00 sec 162 MBytes 136 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.119 port 50979 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 14.5 MBytes 122 Mbits/sec 0 501 KBytes
[ 5] 1.00-2.00 sec 13.9 MBytes 116 Mbits/sec 0 557 KBytes
[ 5] 2.00-3.00 sec 14.2 MBytes 120 Mbits/sec 0 585 KBytes
[ 5] 3.00-4.00 sec 12.4 MBytes 104 Mbits/sec 0 585 KBytes
[ 5] 4.00-5.00 sec 9.50 MBytes 79.7 Mbits/sec 0 585 KBytes
[ 5] 5.00-6.00 sec 11.9 MBytes 99.6 Mbits/sec 0 585 KBytes
[ 5] 6.00-7.00 sec 12.5 MBytes 105 Mbits/sec 0 659 KBytes
[ 5] 7.00-8.00 sec 12.2 MBytes 103 Mbits/sec 0 659 KBytes
[ 5] 8.00-9.00 sec 12.1 MBytes 102 Mbits/sec 0 659 KBytes
[ 5] 9.00-10.00 sec 13.2 MBytes 111 Mbits/sec 0 659 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 126 MBytes 106 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 124 MBytes 104 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 signal: -34 dBm tx bitrate: 434.0 MBit/s

Realtek 8812AU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8812AU AC 109 Mbits/sec 103 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.118 port 56907 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 11.1 MBytes 93.2 Mbits/sec
[ 5] 1.00-2.00 sec 12.6 MBytes 106 Mbits/sec
[ 5] 2.00-3.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 3.00-4.00 sec 12.8 MBytes 107 Mbits/sec
[ 5] 4.00-5.00 sec 12.6 MBytes 106 Mbits/sec
[ 5] 5.00-6.00 sec 12.9 MBytes 108 Mbits/sec
[ 5] 6.00-7.00 sec 13.1 MBytes 110 Mbits/sec
[ 5] 7.00-8.00 sec 12.6 MBytes 106 Mbits/sec
[ 5] 8.00-9.00 sec 12.6 MBytes 106 Mbits/sec
[ 5] 9.00-10.00 sec 12.9 MBytes 108 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 130 MBytes 109 Mbits/sec 455 sender [ 5] 0.00-10.00 sec 126 MBytes 106 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.118 port 32849 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 15.0 MBytes 126 Mbits/sec 0 496 KBytes
[ 5] 1.00-2.00 sec 11.9 MBytes 99.6 Mbits/sec 0 559 KBytes
[ 5] 2.00-3.00 sec 12.5 MBytes 105 Mbits/sec 0 619 KBytes
[ 5] 3.00-4.00 sec 11.0 MBytes 92.3 Mbits/sec 0 697 KBytes
[ 5] 4.00-5.00 sec 12.6 MBytes 106 Mbits/sec 0 734 KBytes
[ 5] 5.00-6.00 sec 12.9 MBytes 108 Mbits/sec 0 734 KBytes
[ 5] 6.00-7.00 sec 9.62 MBytes 80.7 Mbits/sec 0 734 KBytes
[ 5] 7.00-8.00 sec 11.4 MBytes 95.4 Mbits/sec 0 734 KBytes
[ 5] 8.00-9.00 sec 12.5 MBytes 105 Mbits/sec 0 734 KBytes
[ 5] 9.00-10.00 sec 13.0 MBytes 109 Mbits/sec 0 734 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 122 MBytes 103 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 119 MBytes 99.7 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 signal: -44 dBm tx bitrate: 174.0 MBit/s

Realtek 8814AU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8814AU AC 147 Mbits/sec 23.6 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.106 port 52293 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 17.4 MBytes 146 Mbits/sec
[ 5] 1.00-2.00 sec 16.8 MBytes 141 Mbits/sec
[ 5] 2.00-3.00 sec 16.1 MBytes 135 Mbits/sec
[ 5] 3.00-4.00 sec 16.2 MBytes 136 Mbits/sec
[ 5] 4.00-5.00 sec 17.5 MBytes 147 Mbits/sec
[ 5] 5.00-6.00 sec 18.0 MBytes 151 Mbits/sec
[ 5] 6.00-7.00 sec 17.9 MBytes 150 Mbits/sec
[ 5] 7.00-8.00 sec 17.8 MBytes 149 Mbits/sec
[ 5] 8.00-9.00 sec 17.6 MBytes 148 Mbits/sec
[ 5] 9.00-10.00 sec 17.8 MBytes 149 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 176 MBytes 147 Mbits/sec 142 sender [ 5] 0.00-10.00 sec 173 MBytes 145 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.106 port 46047 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 3.38 MBytes 28.3 Mbits/sec 0 201 KBytes
[ 5] 1.00-2.00 sec 3.25 MBytes 27.3 Mbits/sec 0 308 KBytes
[ 5] 2.00-3.00 sec 2.62 MBytes 22.0 Mbits/sec 0 325 KBytes
[ 5] 3.00-4.00 sec 2.75 MBytes 23.1 Mbits/sec 0 342 KBytes
[ 5] 4.00-5.00 sec 2.75 MBytes 23.1 Mbits/sec 0 342 KBytes
[ 5] 5.00-6.00 sec 2.75 MBytes 23.1 Mbits/sec 0 342 KBytes
[ 5] 6.00-7.00 sec 2.88 MBytes 24.1 Mbits/sec 0 342 KBytes
[ 5] 7.00-8.00 sec 3.00 MBytes 25.2 Mbits/sec 0 361 KBytes
[ 5] 8.00-9.00 sec 2.25 MBytes 18.9 Mbits/sec 0 387 KBytes
[ 5] 9.00-10.00 sec 2.50 MBytes 21.0 Mbits/sec 1 270 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 28.1 MBytes 23.6 Mbits/sec 1 sender [ 5] 0.00-10.09 sec 26.9 MBytes 22.3 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 signal: -37 dBm tx bitrate: 867.0 MBit/s

Realtek 8821CU #1

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8821CU AC 116 Mbits/sec 203 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.136 port 51013 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec
[ 5] 1.00-2.00 sec 13.2 MBytes 111 Mbits/sec
[ 5] 2.00-3.00 sec 13.2 MBytes 111 Mbits/sec
[ 5] 3.00-4.00 sec 13.2 MBytes 111 Mbits/sec
[ 5] 4.00-5.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 5.00-6.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 6.00-7.00 sec 13.1 MBytes 110 Mbits/sec
[ 5] 7.00-8.00 sec 15.0 MBytes 126 Mbits/sec
[ 5] 8.00-9.00 sec 15.9 MBytes 133 Mbits/sec
[ 5] 9.00-10.00 sec 15.9 MBytes 133 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 139 MBytes 116 Mbits/sec 1 sender [ 5] 0.00-10.00 sec 138 MBytes 116 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.136 port 46429 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 29.4 MBytes 246 Mbits/sec 0 636 KBytes
[ 5] 1.00-2.00 sec 25.5 MBytes 214 Mbits/sec 0 636 KBytes
[ 5] 2.00-3.00 sec 24.8 MBytes 208 Mbits/sec 0 667 KBytes
[ 5] 3.00-4.00 sec 24.0 MBytes 201 Mbits/sec 0 667 KBytes
[ 5] 4.00-5.00 sec 24.1 MBytes 202 Mbits/sec 0 667 KBytes
[ 5] 5.00-6.00 sec 22.8 MBytes 191 Mbits/sec 0 667 KBytes
[ 5] 6.00-7.00 sec 23.1 MBytes 194 Mbits/sec 0 704 KBytes
[ 5] 7.00-8.00 sec 22.1 MBytes 186 Mbits/sec 0 704 KBytes
[ 5] 8.00-9.00 sec 23.2 MBytes 195 Mbits/sec 2 704 KBytes
[ 5] 9.00-10.00 sec 23.4 MBytes 196 Mbits/sec 0 704 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 242 MBytes 203 Mbits/sec 2 sender [ 5] 0.00-10.02 sec 239 MBytes 200 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 195141 bytes (375 packets) TX: 101644 bytes (475 packets) signal: -36 dBm rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1 tx bitrate: 433.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 1

Realtek 8821CU #2

OS: Armbian v25.5.1, 6.12.28-current-meson64
Chipset Class Average forward speed Average reverse speed
RTL8821CU AC 35.7 Mbits/sec 175 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.163 port 40003 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 8.12 MBytes 68.1 Mbits/sec
[ 5] 1.00-2.00 sec 8.88 MBytes 74.4 Mbits/sec
[ 5] 2.00-3.00 sec 2.62 MBytes 22.0 Mbits/sec
[ 5] 3.00-4.00 sec 2.75 MBytes 23.1 Mbits/sec
[ 5] 4.00-5.00 sec 1.38 MBytes 11.5 Mbits/sec
[ 5] 5.00-6.00 sec 1.62 MBytes 13.6 Mbits/sec
[ 5] 6.00-7.00 sec 3.38 MBytes 28.3 Mbits/sec
[ 5] 7.00-8.00 sec 3.38 MBytes 28.3 Mbits/sec
[ 5] 8.00-9.00 sec 3.50 MBytes 29.4 Mbits/sec
[ 5] 9.00-10.00 sec 4.00 MBytes 33.6 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.05 sec 42.8 MBytes 35.7 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 39.6 MBytes 33.2 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.163 port 60179 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 25.8 MBytes 216 Mbits/sec 0 3.20 MBytes
[ 5] 1.00-2.00 sec 25.9 MBytes 217 Mbits/sec 0 3.89 MBytes
[ 5] 2.00-3.00 sec 27.0 MBytes 226 Mbits/sec 0 5.53 MBytes
[ 5] 3.00-4.00 sec 26.6 MBytes 223 Mbits/sec 0 5.53 MBytes
[ 5] 4.00-5.00 sec 23.9 MBytes 200 Mbits/sec 0 6.10 MBytes
[ 5] 5.00-6.00 sec 23.1 MBytes 194 Mbits/sec 0 6.24 MBytes
[ 5] 6.00-7.00 sec 15.8 MBytes 132 Mbits/sec 0 6.42 MBytes
[ 5] 7.00-8.00 sec 16.9 MBytes 141 Mbits/sec 0 6.42 MBytes
[ 5] 8.00-9.00 sec 11.2 MBytes 94.4 Mbits/sec 0 6.42 MBytes
[ 5] 9.00-10.00 sec 12.9 MBytes 108 Mbits/sec 0 6.42 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 209 MBytes 175 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 209 MBytes 175 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ```

```

Realtek 8822CE

OS: Armbian v25.2.3, 6.12.21-current-rockchip64
Chipset Class Average forward speed Average reverse speed
RTL8822CE AC 514 Mbits/sec 315 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.127 port 43813 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 68.0 MBytes 570 Mbits/sec
[ 5] 1.00-2.00 sec 67.8 MBytes 569 Mbits/sec
[ 5] 2.00-3.00 sec 56.2 MBytes 471 Mbits/sec
[ 5] 3.00-4.00 sec 59.9 MBytes 502 Mbits/sec
[ 5] 4.00-5.00 sec 60.3 MBytes 506 Mbits/sec
[ 5] 5.00-6.00 sec 55.6 MBytes 467 Mbits/sec
[ 5] 6.00-7.00 sec 59.3 MBytes 498 Mbits/sec
[ 5] 7.00-8.00 sec 59.5 MBytes 499 Mbits/sec
[ 5] 8.00-9.00 sec 63.5 MBytes 533 Mbits/sec
[ 5] 9.00-10.00 sec 60.2 MBytes 505 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 614 MBytes 514 Mbits/sec 334 sender [ 5] 0.00-10.00 sec 610 MBytes 512 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.127 port 54887 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 25.5 MBytes 214 Mbits/sec 14 185 KBytes
[ 5] 1.00-2.00 sec 36.4 MBytes 305 Mbits/sec 52 87.7 KBytes
[ 5] 2.00-3.00 sec 32.5 MBytes 273 Mbits/sec 7 252 KBytes
[ 5] 3.00-4.00 sec 50.8 MBytes 426 Mbits/sec 0 457 KBytes
[ 5] 4.00-5.00 sec 45.4 MBytes 381 Mbits/sec 14 219 KBytes
[ 5] 5.00-6.00 sec 41.4 MBytes 348 Mbits/sec 14 146 KBytes
[ 5] 6.00-7.00 sec 37.6 MBytes 315 Mbits/sec 7 202 KBytes
[ 5] 7.00-8.00 sec 43.3 MBytes 363 Mbits/sec 7 216 KBytes
[ 5] 8.00-9.00 sec 30.6 MBytes 257 Mbits/sec 21 204 KBytes
[ 5] 9.00-10.00 sec 31.6 MBytes 265 Mbits/sec 14 238 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 375 MBytes 315 Mbits/sec 150 sender [ 5] 0.00-10.01 sec 372 MBytes 312 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 5500 RX: 135215 bytes (495 packets) TX: 60332 bytes (223 packets) signal: -31 dBm rx bitrate: 780.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 2 tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2

```

AX

Comfast CF953AX

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
MT7921AU AX 97.6 Mbits/sec 152 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.117 port 45117 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 10.8 MBytes 90.1 Mbits/sec
[ 5] 1.00-2.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5] 2.00-3.00 sec 11.6 MBytes 97.5 Mbits/sec
[ 5] 3.00-4.00 sec 11.0 MBytes 92.3 Mbits/sec
[ 5] 4.00-5.00 sec 11.6 MBytes 97.5 Mbits/sec
[ 5] 5.00-6.00 sec 11.5 MBytes 96.5 Mbits/sec
[ 5] 6.00-7.00 sec 11.9 MBytes 99.4 Mbits/sec
[ 5] 7.00-8.00 sec 11.1 MBytes 93.5 Mbits/sec
[ 5] 8.00-9.00 sec 11.2 MBytes 94.4 Mbits/sec
[ 5] 9.00-10.00 sec 11.4 MBytes 95.4 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 116 MBytes 97.6 Mbits/sec 147 sender [ 5] 0.00-10.00 sec 114 MBytes 95.3 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.117 port 51683 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 20.1 MBytes 169 Mbits/sec 0 559 KBytes
[ 5] 1.00-2.00 sec 18.2 MBytes 153 Mbits/sec 0 669 KBytes
[ 5] 2.00-3.00 sec 17.5 MBytes 147 Mbits/sec 0 669 KBytes
[ 5] 3.00-4.00 sec 18.1 MBytes 152 Mbits/sec 0 706 KBytes
[ 5] 4.00-5.00 sec 18.2 MBytes 153 Mbits/sec 0 706 KBytes
[ 5] 5.00-6.00 sec 16.8 MBytes 141 Mbits/sec 0 738 KBytes
[ 5] 6.00-7.00 sec 18.2 MBytes 153 Mbits/sec 0 738 KBytes
[ 5] 7.00-8.00 sec 17.1 MBytes 144 Mbits/sec 0 738 KBytes
[ 5] 8.00-9.00 sec 18.2 MBytes 153 Mbits/sec 0 738 KBytes
[ 5] 9.00-10.00 sec 18.1 MBytes 152 Mbits/sec 0 781 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 181 MBytes 152 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 177 MBytes 148 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 160034 bytes (501 packets) TX: 88354 bytes (496 packets) signal: -38 dBm rx bitrate: 1080.6 MBit/s 80MHz HE-MCS 10 HE-NSS 2 HE-GI 0 HE-DCM 0 tx bitrate: 960.7 MBit/s 80MHz HE-MCS 9 HE-NSS 2 HE-GI 0 HE-DCM 0

Intel AX200

OS: Armbian v25.2.2, 6.12.15-current-rockchip64
Chipset Class Average forward speed Average reverse speed
AX200 AX 311 Mbits/sec 737 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.116 port 59875 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 30.0 MBytes 251 Mbits/sec
[ 5] 1.00-2.00 sec 34.4 MBytes 288 Mbits/sec
[ 5] 2.00-3.00 sec 40.0 MBytes 336 Mbits/sec
[ 5] 3.00-4.00 sec 32.4 MBytes 272 Mbits/sec
[ 5] 4.00-5.00 sec 32.5 MBytes 273 Mbits/sec
[ 5] 5.00-6.00 sec 36.8 MBytes 308 Mbits/sec
[ 5] 6.00-7.00 sec 35.4 MBytes 297 Mbits/sec
[ 5] 7.00-8.00 sec 46.9 MBytes 393 Mbits/sec
[ 5] 8.00-9.00 sec 40.2 MBytes 338 Mbits/sec
[ 5] 9.00-10.00 sec 39.1 MBytes 328 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 372 MBytes 311 Mbits/sec 160 sender [ 5] 0.00-10.00 sec 368 MBytes 308 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.116 port 60531 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 104 MBytes 874 Mbits/sec 0 6.43 MBytes
[ 5] 1.00-2.00 sec 104 MBytes 876 Mbits/sec 0 6.43 MBytes
[ 5] 2.00-3.00 sec 106 MBytes 891 Mbits/sec 0 6.43 MBytes
[ 5] 3.00-4.00 sec 95.0 MBytes 797 Mbits/sec 0 6.43 MBytes
[ 5] 4.00-5.00 sec 95.5 MBytes 801 Mbits/sec 37 3.21 MBytes
[ 5] 5.00-6.00 sec 100 MBytes 842 Mbits/sec 0 3.21 MBytes
[ 5] 6.00-7.00 sec 73.0 MBytes 612 Mbits/sec 96 858 KBytes
[ 5] 7.00-8.00 sec 64.9 MBytes 544 Mbits/sec 0 963 KBytes
[ 5] 8.00-9.00 sec 72.5 MBytes 608 Mbits/sec 29 570 KBytes
[ 5] 9.00-10.00 sec 62.6 MBytes 525 Mbits/sec 0 711 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 879 MBytes 737 Mbits/sec 162 sender [ 5] 0.00-10.01 sec 875 MBytes 734 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 78806 bytes (273 packets) TX: 51439 bytes (229 packets) signal: -33 dBm rx bitrate: 1297.1 MBit/s 160MHz HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0 tx bitrate: 490.0 MBit/s 160MHz HE-MCS 3 HE-NSS 2 HE-GI 2 HE-DCM 0

N

Alfa RT3572

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RT3572 N 87.3 Mbits/sec 65.6 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.114 port 40121 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 9.75 MBytes 81.7 Mbits/sec
[ 5] 1.00-2.00 sec 10.4 MBytes 87.0 Mbits/sec
[ 5] 2.00-3.00 sec 10.2 MBytes 86.0 Mbits/sec
[ 5] 3.00-4.00 sec 10.0 MBytes 83.8 Mbits/sec
[ 5] 4.00-5.00 sec 10.2 MBytes 86.1 Mbits/sec
[ 5] 5.00-6.00 sec 10.6 MBytes 89.1 Mbits/sec
[ 5] 6.00-7.00 sec 10.1 MBytes 84.9 Mbits/sec
[ 5] 7.00-8.00 sec 10.1 MBytes 85.0 Mbits/sec
[ 5] 8.00-9.00 sec 10.2 MBytes 85.9 Mbits/sec
[ 5] 9.00-10.00 sec 10.1 MBytes 84.9 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 104 MBytes 87.3 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 102 MBytes 85.5 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.114 port 40119 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 8.50 MBytes 71.2 Mbits/sec 0 222 KBytes
[ 5] 1.00-2.00 sec 7.50 MBytes 62.9 Mbits/sec 0 272 KBytes
[ 5] 2.00-3.00 sec 7.38 MBytes 61.9 Mbits/sec 0 284 KBytes
[ 5] 3.00-4.00 sec 7.75 MBytes 65.0 Mbits/sec 0 354 KBytes
[ 5] 4.00-5.00 sec 8.25 MBytes 69.2 Mbits/sec 0 375 KBytes
[ 5] 5.00-6.00 sec 7.50 MBytes 63.0 Mbits/sec 0 375 KBytes
[ 5] 6.00-7.00 sec 7.50 MBytes 62.9 Mbits/sec 0 375 KBytes
[ 5] 7.00-8.00 sec 7.75 MBytes 65.0 Mbits/sec 0 375 KBytes
[ 5] 8.00-9.00 sec 7.38 MBytes 61.9 Mbits/sec 0 375 KBytes
[ 5] 9.00-10.00 sec 8.75 MBytes 73.3 Mbits/sec 0 527 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 78.2 MBytes 65.6 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 75.2 MBytes 63.1 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 193222 bytes (585 packets) TX: 99469 bytes (543 packets) signal: -17 dBm rx bitrate: 300.0 MBit/s MCS 15 40MHz short GI tx bitrate: 300.0 MBit/s MCS 15 40MHz short GI

Broadcom 43430

OS: Armbian v25.5.1, 6.12.23-current-sunxi
Chipset Class Average forward speed Average reverse speed
BCM43430 N 56.1 Mbits/sec 43.8 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.164 port 45037 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 6.32 MBytes 53.0 Mbits/sec
[ 5] 1.00-2.00 sec 6.29 MBytes 52.8 Mbits/sec
[ 5] 2.00-3.00 sec 6.60 MBytes 55.3 Mbits/sec
[ 5] 3.00-4.00 sec 6.59 MBytes 55.3 Mbits/sec
[ 5] 4.00-5.00 sec 6.61 MBytes 55.5 Mbits/sec
[ 5] 5.00-6.00 sec 6.39 MBytes 53.6 Mbits/sec
[ 5] 6.00-7.00 sec 6.40 MBytes 53.7 Mbits/sec
[ 5] 7.00-8.00 sec 6.68 MBytes 56.1 Mbits/sec
[ 5] 8.00-9.00 sec 6.53 MBytes 54.8 Mbits/sec
[ 5] 9.00-10.00 sec 5.78 MBytes 48.5 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 67.0 MBytes 56.1 Mbits/sec 145 sender [ 5] 0.00-10.00 sec 64.2 MBytes 53.8 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.164 port 34893 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 5.72 MBytes 48.0 Mbits/sec 0 250 KBytes
[ 5] 1.00-2.00 sec 5.28 MBytes 44.3 Mbits/sec 0 263 KBytes
[ 5] 2.00-3.00 sec 5.28 MBytes 44.3 Mbits/sec 0 263 KBytes
[ 5] 3.00-4.00 sec 4.97 MBytes 41.7 Mbits/sec 0 263 KBytes
[ 5] 4.00-5.00 sec 4.97 MBytes 41.7 Mbits/sec 0 270 KBytes
[ 5] 5.00-6.00 sec 4.97 MBytes 41.7 Mbits/sec 0 277 KBytes
[ 5] 6.00-7.00 sec 5.28 MBytes 44.3 Mbits/sec 0 277 KBytes
[ 5] 7.00-8.00 sec 5.22 MBytes 43.8 Mbits/sec 0 351 KBytes
[ 5] 8.00-9.00 sec 5.22 MBytes 43.8 Mbits/sec 0 351 KBytes
[ 5] 9.00-10.00 sec 5.34 MBytes 44.8 Mbits/sec 0 351 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 52.3 MBytes 43.8 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 51.4 MBytes 43.0 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 2462 RX: 66355 bytes (194 packets) TX: 59173 bytes (281 packets) signal: -51 dBm rx bitrate: 72.2 MBit/s tx bitrate: 72.2 MBit/s

```

Broadcom 43455

OS: Armbian v25.2.3, 6.12.22-current-x86
Chipset Class Average forward speed Average reverse speed
BCM43455 N 45.0 Mbits/sec 52.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.120 port 34085 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 5.88 MBytes 49.3 Mbits/sec
[ 5] 1.00-2.00 sec 5.58 MBytes 46.9 Mbits/sec
[ 5] 2.00-3.00 sec 5.69 MBytes 47.8 Mbits/sec
[ 5] 3.00-4.00 sec 4.75 MBytes 39.8 Mbits/sec
[ 5] 4.00-5.00 sec 4.88 MBytes 40.9 Mbits/sec
[ 5] 5.00-6.00 sec 5.02 MBytes 42.1 Mbits/sec
[ 5] 6.00-7.00 sec 5.53 MBytes 46.3 Mbits/sec
[ 5] 7.00-8.00 sec 4.68 MBytes 39.3 Mbits/sec
[ 5] 8.00-9.00 sec 4.78 MBytes 40.1 Mbits/sec
[ 5] 9.00-10.00 sec 5.26 MBytes 44.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.38 sec 55.6 MBytes 45.0 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 52.1 MBytes 43.7 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.120 port 50963 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 6.68 MBytes 56.0 Mbits/sec 0 201 KBytes
[ 5] 1.00-2.00 sec 6.40 MBytes 53.7 Mbits/sec 0 236 KBytes
[ 5] 2.00-3.00 sec 5.65 MBytes 47.4 Mbits/sec 0 250 KBytes
[ 5] 3.00-4.00 sec 7.21 MBytes 60.5 Mbits/sec 0 305 KBytes
[ 5] 4.00-5.00 sec 6.03 MBytes 50.6 Mbits/sec 0 321 KBytes
[ 5] 5.00-6.00 sec 6.09 MBytes 51.1 Mbits/sec 0 321 KBytes
[ 5] 6.00-7.00 sec 6.09 MBytes 51.1 Mbits/sec 0 321 KBytes
[ 5] 7.00-8.00 sec 6.84 MBytes 57.4 Mbits/sec 0 321 KBytes
[ 5] 8.00-9.00 sec 5.47 MBytes 45.9 Mbits/sec 0 321 KBytes
[ 5] 9.00-10.00 sec 5.97 MBytes 50.0 Mbits/sec 0 321 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 62.4 MBytes 52.4 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 60.9 MBytes 51.0 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ``` freq: 5500 RX: 57203 bytes (181 packets) TX: 53948 bytes (235 packets) signal: -52 dBm rx bitrate: 433.3 MBit/s tx bitrate: 433.3 MBit/s

```

Ralink RT5370

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RT5370 N 25.5 Mbits/sec 35.3 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.112 port 51909 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 1.25 MBytes 10.5 Mbits/sec
[ 5] 1.00-2.00 sec 2.62 MBytes 22.0 Mbits/sec
[ 5] 2.00-3.00 sec 3.00 MBytes 25.2 Mbits/sec
[ 5] 3.00-4.00 sec 2.88 MBytes 24.1 Mbits/sec
[ 5] 4.00-5.00 sec 2.75 MBytes 23.1 Mbits/sec
[ 5] 5.00-6.00 sec 2.75 MBytes 23.1 Mbits/sec
[ 5] 6.00-7.00 sec 2.75 MBytes 23.1 Mbits/sec
[ 5] 7.00-8.00 sec 2.88 MBytes 24.1 Mbits/sec
[ 5] 8.00-9.00 sec 3.00 MBytes 25.2 Mbits/sec
[ 5] 9.00-10.00 sec 3.25 MBytes 27.3 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.02 sec 30.5 MBytes 25.5 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 27.1 MBytes 22.8 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.112 port 44927 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 4.88 MBytes 40.9 Mbits/sec 0 228 KBytes
[ 5] 1.00-2.00 sec 4.50 MBytes 37.7 Mbits/sec 0 409 KBytes
[ 5] 2.00-3.00 sec 5.25 MBytes 44.0 Mbits/sec 0 573 KBytes
[ 5] 3.00-4.00 sec 4.00 MBytes 33.5 Mbits/sec 0 734 KBytes
[ 5] 4.00-5.00 sec 4.12 MBytes 34.6 Mbits/sec 0 829 KBytes
[ 5] 5.00-6.00 sec 2.75 MBytes 23.1 Mbits/sec 0 1000 KBytes
[ 5] 6.00-7.00 sec 5.50 MBytes 46.1 Mbits/sec 1 716 KBytes
[ 5] 7.00-8.00 sec 2.75 MBytes 23.1 Mbits/sec 0 793 KBytes
[ 5] 8.00-9.00 sec 4.12 MBytes 34.6 Mbits/sec 0 878 KBytes
[ 5] 9.00-10.00 sec 4.25 MBytes 35.6 Mbits/sec 1 655 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 42.1 MBytes 35.3 Mbits/sec 2 sender [ 5] 0.00-10.01 sec 39.0 MBytes 32.7 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 86377 bytes (366 packets) TX: 55984 bytes (217 packets) signal: -27 dBm rx bitrate: 58.5 MBit/s MCS 6 tx bitrate: 65.0 MBit/s MCS 7

Ralink RT5572

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RT5572 N 88.1 Mbits/sec 65.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.111 port 53039 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 8.62 MBytes 72.3 Mbits/sec
[ 5] 1.00-2.00 sec 10.5 MBytes 88.1 Mbits/sec
[ 5] 2.00-3.00 sec 9.75 MBytes 81.8 Mbits/sec
[ 5] 3.00-4.00 sec 10.0 MBytes 83.9 Mbits/sec
[ 5] 4.00-5.00 sec 10.2 MBytes 86.0 Mbits/sec
[ 5] 5.00-6.00 sec 10.6 MBytes 89.1 Mbits/sec
[ 5] 6.00-7.00 sec 10.4 MBytes 87.0 Mbits/sec
[ 5] 7.00-8.00 sec 10.6 MBytes 89.1 Mbits/sec
[ 5] 8.00-9.00 sec 10.8 MBytes 90.2 Mbits/sec
[ 5] 9.00-10.00 sec 10.6 MBytes 89.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.01 sec 105 MBytes 88.1 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 102 MBytes 85.7 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.111 port 44471 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 8.62 MBytes 72.3 Mbits/sec 0 228 KBytes
[ 5] 1.00-2.00 sec 8.00 MBytes 67.1 Mbits/sec 0 257 KBytes
[ 5] 2.00-3.00 sec 7.50 MBytes 62.9 Mbits/sec 0 257 KBytes
[ 5] 3.00-4.00 sec 7.88 MBytes 66.1 Mbits/sec 0 257 KBytes
[ 5] 4.00-5.00 sec 7.75 MBytes 65.0 Mbits/sec 0 257 KBytes
[ 5] 5.00-6.00 sec 7.88 MBytes 66.1 Mbits/sec 0 257 KBytes
[ 5] 6.00-7.00 sec 7.75 MBytes 65.1 Mbits/sec 0 257 KBytes
[ 5] 7.00-8.00 sec 7.12 MBytes 59.7 Mbits/sec 0 301 KBytes
[ 5] 8.00-9.00 sec 7.50 MBytes 62.9 Mbits/sec 0 301 KBytes
[ 5] 9.00-10.00 sec 8.00 MBytes 67.1 Mbits/sec 0 301 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 78.0 MBytes 65.4 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 76.4 MBytes 64.0 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500.0 RX: 192994 bytes (589 packets) TX: 103146 bytes (527 packets) signal: -34 dBm rx bitrate: 300.0 MBit/s MCS 15 40MHz short GI tx bitrate: 270.0 MBit/s MCS 15 40MHz

Realtek 8188CUS

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8192CU N 48.1 Mbits/sec 28.7 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.110 port 48305 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 5.50 MBytes 46.1 Mbits/sec
[ 5] 1.00-2.00 sec 5.75 MBytes 48.2 Mbits/sec
[ 5] 2.00-3.00 sec 5.75 MBytes 48.2 Mbits/sec
[ 5] 3.00-4.00 sec 5.75 MBytes 48.2 Mbits/sec
[ 5] 4.00-5.00 sec 5.75 MBytes 48.2 Mbits/sec
[ 5] 5.00-6.00 sec 5.62 MBytes 47.2 Mbits/sec
[ 5] 6.00-7.00 sec 5.38 MBytes 45.1 Mbits/sec
[ 5] 7.00-8.00 sec 5.00 MBytes 41.9 Mbits/sec
[ 5] 8.00-9.00 sec 5.38 MBytes 45.1 Mbits/sec
[ 5] 9.00-10.00 sec 5.62 MBytes 47.2 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.20 sec 58.5 MBytes 48.1 Mbits/sec 52 sender [ 5] 0.00-10.00 sec 55.5 MBytes 46.6 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.110 port 40967 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 4.25 MBytes 35.6 Mbits/sec 0 208 KBytes
[ 5] 1.00-2.00 sec 3.75 MBytes 31.5 Mbits/sec 0 273 KBytes
[ 5] 2.00-3.00 sec 3.12 MBytes 26.2 Mbits/sec 0 314 KBytes
[ 5] 3.00-4.00 sec 4.00 MBytes 33.6 Mbits/sec 0 339 KBytes
[ 5] 4.00-5.00 sec 3.00 MBytes 25.2 Mbits/sec 0 355 KBytes
[ 5] 5.00-6.00 sec 3.75 MBytes 31.5 Mbits/sec 0 358 KBytes
[ 5] 6.00-7.00 sec 3.00 MBytes 25.2 Mbits/sec 0 358 KBytes
[ 5] 7.00-8.00 sec 3.75 MBytes 31.5 Mbits/sec 0 358 KBytes
[ 5] 8.00-9.00 sec 3.25 MBytes 27.3 Mbits/sec 0 387 KBytes
[ 5] 9.00-10.00 sec 2.38 MBytes 19.9 Mbits/sec 0 387 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 34.2 MBytes 28.7 Mbits/sec 0 sender [ 5] 0.00-10.02 sec 32.9 MBytes 27.5 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 85722 bytes (308 packets) TX: 51703 bytes (205 packets) signal: -36 dBm rx bitrate: 65.0 MBit/s MCS 7 tx bitrate: 72.2 MBit/s MCS 7 short GI

Realtek 8723BS

OS: Armbian v25.2.1, 6.12.13-current-rockchip
Chipset Class Average forward speed Average reverse speed
RTL8723BS N 36.6 Mbits/sec 47.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.134 port 41613 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 6.03 MBytes 50.6 Mbits/sec
[ 5] 1.00-2.00 sec 5.04 MBytes 42.3 Mbits/sec
[ 5] 2.00-3.00 sec 4.14 MBytes 34.7 Mbits/sec
[ 5] 3.00-4.00 sec 4.04 MBytes 33.9 Mbits/sec
[ 5] 4.00-5.00 sec 2.10 MBytes 17.6 Mbits/sec
[ 5] 5.00-6.00 sec 2.48 MBytes 20.8 Mbits/sec
[ 5] 6.00-7.00 sec 3.88 MBytes 32.6 Mbits/sec
[ 5] 7.00-8.00 sec 3.69 MBytes 31.0 Mbits/sec
[ 5] 8.00-9.00 sec 4.46 MBytes 37.5 Mbits/sec
[ 5] 9.00-10.00 sec 4.46 MBytes 37.4 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.08 sec 44.0 MBytes 36.6 Mbits/sec 38 sender [ 5] 0.00-10.00 sec 40.3 MBytes 33.8 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.134 port 45499 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 6.14 MBytes 51.5 Mbits/sec 0 372 KBytes
[ 5] 1.00-2.00 sec 5.59 MBytes 46.9 Mbits/sec 0 543 KBytes
[ 5] 2.00-3.00 sec 5.10 MBytes 42.7 Mbits/sec 0 543 KBytes
[ 5] 3.00-4.00 sec 5.59 MBytes 46.9 Mbits/sec 0 543 KBytes
[ 5] 4.00-5.00 sec 5.72 MBytes 48.0 Mbits/sec 0 543 KBytes
[ 5] 5.00-6.00 sec 5.97 MBytes 50.0 Mbits/sec 0 571 KBytes
[ 5] 6.00-7.00 sec 5.59 MBytes 46.9 Mbits/sec 0 571 KBytes
[ 5] 7.00-8.00 sec 5.59 MBytes 46.9 Mbits/sec 0 571 KBytes
[ 5] 8.00-9.00 sec 5.59 MBytes 46.9 Mbits/sec 0 571 KBytes
[ 5] 9.00-10.00 sec 5.59 MBytes 46.9 Mbits/sec 0 571 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 56.5 MBytes 47.4 Mbits/sec 0 sender [ 5] 0.00-10.05 sec 55.1 MBytes 46.0 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" ```

```

Realtek 8723BU

OS: Armbian v25.5.0-trunk.550, 6.12.28-current-x86
Chipset Class Average forward speed Average reverse speed
RTL8723BU N 34.3 Mbits/sec 45.6 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.109 port 38923 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 3.75 MBytes 31.4 Mbits/sec
[ 5] 1.00-2.00 sec 3.50 MBytes 29.4 Mbits/sec
[ 5] 2.00-3.00 sec 3.75 MBytes 31.5 Mbits/sec
[ 5] 3.00-4.00 sec 3.38 MBytes 28.3 Mbits/sec
[ 5] 4.00-5.00 sec 4.00 MBytes 33.6 Mbits/sec
[ 5] 5.00-6.00 sec 4.25 MBytes 35.7 Mbits/sec
[ 5] 6.00-7.00 sec 4.00 MBytes 33.6 Mbits/sec
[ 5] 7.00-8.00 sec 3.88 MBytes 32.5 Mbits/sec
[ 5] 8.00-9.00 sec 3.88 MBytes 32.5 Mbits/sec
[ 5] 9.00-10.00 sec 4.38 MBytes 36.7 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.17 sec 41.6 MBytes 34.3 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 38.8 MBytes 32.5 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.109 port 53447 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 6.38 MBytes 53.4 Mbits/sec 0 257 KBytes
[ 5] 1.00-2.00 sec 5.38 MBytes 45.1 Mbits/sec 0 365 KBytes
[ 5] 2.00-3.00 sec 5.50 MBytes 46.2 Mbits/sec 0 440 KBytes
[ 5] 3.00-4.00 sec 5.50 MBytes 46.1 Mbits/sec 0 498 KBytes
[ 5] 4.00-5.00 sec 5.12 MBytes 43.0 Mbits/sec 0 523 KBytes
[ 5] 5.00-6.00 sec 5.25 MBytes 44.0 Mbits/sec 0 523 KBytes
[ 5] 6.00-7.00 sec 5.38 MBytes 45.1 Mbits/sec 0 523 KBytes
[ 5] 7.00-8.00 sec 5.25 MBytes 44.0 Mbits/sec 0 523 KBytes
[ 5] 8.00-9.00 sec 5.25 MBytes 44.1 Mbits/sec 0 523 KBytes
[ 5] 9.00-10.00 sec 5.38 MBytes 45.1 Mbits/sec 0 588 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 54.4 MBytes 45.6 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 51.4 MBytes 43.0 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 2462.0 RX: 83111 bytes (350 packets) TX: 58717 bytes (225 packets) signal: -48 dBm rx bitrate: 52.0 MBit/s MCS 5 tx bitrate: 72.2 MBit/s MCS 7 short GI

UWE 5622

OS: Armbian v25.5.0-trunk.538, 6.12.23-current-sunxi64
Chipset Class Average forward speed Average reverse speed
UWE5622 N 2.08 Mbits/sec 15.4 Mbits/sec

=== "Forward mode (client to server)" ``` Connecting to host 10.0.60.10, port 5201 Reverse mode, remote host 10.0.60.10 is sending [ 5] local 10.0.50.128 port 42067 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 478 KBytes 3.92 Mbits/sec
[ 5] 1.00-2.00 sec 99.0 KBytes 811 Kbits/sec
[ 5] 2.00-3.00 sec 91.9 KBytes 753 Kbits/sec
[ 5] 3.00-4.00 sec 84.8 KBytes 695 Kbits/sec
[ 5] 4.00-5.00 sec 93.3 KBytes 765 Kbits/sec
[ 5] 5.00-6.00 sec 86.3 KBytes 707 Kbits/sec
[ 5] 6.00-7.00 sec 93.3 KBytes 765 Kbits/sec
[ 5] 7.00-8.00 sec 91.9 KBytes 753 Kbits/sec
[ 5] 8.00-9.00 sec 87.7 KBytes 718 Kbits/sec
[ 5] 9.00-10.00 sec 97.6 KBytes 799 Kbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.06 sec 2.50 MBytes 2.08 Mbits/sec 1 sender [ 5] 0.00-10.00 sec 1.27 MBytes 1.07 Mbits/sec receiver

iperf Done.
```

=== "Reverse mode (server to client)" ``` Connecting to host 10.0.60.10, port 5201 [ 5] local 10.0.50.128 port 54741 connected to 10.0.60.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 1.98 MBytes 16.6 Mbits/sec 0 140 KBytes
[ 5] 1.00-2.00 sec 1.93 MBytes 16.2 Mbits/sec 0 211 KBytes
[ 5] 2.00-3.00 sec 1.55 MBytes 13.0 Mbits/sec 0 270 KBytes
[ 5] 3.00-4.00 sec 1.93 MBytes 16.2 Mbits/sec 0 314 KBytes
[ 5] 4.00-5.00 sec 1.37 MBytes 11.5 Mbits/sec 0 341 KBytes
[ 5] 5.00-6.00 sec 1.43 MBytes 12.0 Mbits/sec 0 375 KBytes
[ 5] 6.00-7.00 sec 2.42 MBytes 20.3 Mbits/sec 0 426 KBytes
[ 5] 7.00-8.00 sec 1.80 MBytes 15.1 Mbits/sec 0 452 KBytes
[ 5] 8.00-9.00 sec 1.86 MBytes 15.6 Mbits/sec 0 452 KBytes
[ 5] 9.00-10.00 sec 2.11 MBytes 17.7 Mbits/sec 0 501 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 18.4 MBytes 15.4 Mbits/sec 0 sender [ 5] 0.00-10.05 sec 15.9 MBytes 13.2 Mbits/sec receiver

iperf Done.
```

=== "Wireless link info" freq: 5500 RX: 1747456873 bytes (1445198 packets)

Contribute

  • Assist us in developing and maintaining our testing system: Your expertise can help us enhance and optimize our test infrastructure. By contributing your skills, you can play a key role in ensuring the accuracy and reliability of our test results.

  • Donate hardware: Your contribution of new hardware, whether it’s a wireless adapter or any other equipment, helps us expand our testing capabilities. We’re specifically looking for new wireless adapters that haven’t yet been added to our system. Your donation can directly impact the scope and depth of our tests.

  • Join our team: Become part of our passionate and dedicated team. We’re looking for individuals who share our vision and are eager to contribute to the development of innovative testing solutions. Whether you have technical expertise or simply a willingness to learn, there’s a place for you here!

Other resources

Reference in New Issue View Git Blame Copy Permalink