6.6 KiB
Home Automation for control home appliances
openHAB empowering the smart home
This operation will install openHAB.
Command:
armbian-config --cmd HAB001
Author: @armbian
Status: Stable
openHAB remove
This operation will purge openHAB.
Command:
armbian-config --cmd HAB002
Author: @armbian
Status: Stable
openHAB purge with data folder
This operation will purge openHAB.
Command:
armbian-config --cmd HAB003
Author: @armbian
Status: Stable
Home Assistant open source home automation
Home Assistant is an open source smart home platform that allows you to connect your smart home devices like your TV, fan, cameras, thermostats, lights, and sensors. As a user, you can build intricate automation using Home Assistant's user-friendly, unified web-based user interface.
Perfect to run on any single board computer with 4 cores and at least 512Mb of memory. Armbian installation is optimised to run from SD/eMMC media, but it is recommended to use SSD.
=== "Access to the web interface"
The web interface is accessible via port **8123**:
- URL: `https://<your.IP>:8123`
- Username/Password: Are set at first web interface login
=== "Directories"
Home Assistant on Armbian runs supervised in a Docker container. This secures same functionality as stock HAOS.
- Config directory: `/armbian/haos`
This operation will install Home Assistant.
Command:
armbian-config --cmd HAS001
Author: @igorpecovnik
Status: Preview
| Functionality | HAOS | Armbian with HA |
|---|---|---|
| Automations | ✔️ | ✔️ |
| Dashboards | ✔️ | ✔️ |
| Integrations | ✔️ | ✔️ |
| Add-ons | ✔️ | ✔️ |
| One-click updates | ✔️ | ✔️ |
| Backups | ✔️ | ✔️ |
| General purpose server | ❌ | ✅ |
| Running on exotic hardware | ❌ | ✅ |
Home Assistant remove
This operation will remove Home Assistant.
Command:
armbian-config --cmd HAS002
Author: @igorpecovnik
Status: Preview
Home Assistant purge with data folder
This operation will purge Home Assistant.
Command:
armbian-config --cmd HAS003
Author: @igorpecovnik
Status: Preview
Domoticz open source home automation
Domoticz is an open-source home automation platform that allows you to control and monitor smart devices in your home. It supports a wide range of devices, including lights, sensors, thermostats, and cameras. Through its web interface or mobile app, you can set up automation rules and schedules, providing greater convenience and energy efficiency. It’s customizable, flexible, and can be run on a variety of hardware platforms supported by Armbian.
=== "Access to the web interface"
The web interface is accessible via port **8080**:
- URL: `https://<your.IP>:8080`
- Username/Password: admin / domoticz
=== "Directories"
- Config directory: `/armbian/domoticz`
=== "Advanced setup"
- Primary USB device passing through (`/dev/ttyUSB0`) to Docker container is enabled by default
- For more complex setup, please follow this comprehensive guide: <https://wiki.domoticz.com/Main_Page>
This operation will install Domoticz.
Command:
armbian-config --cmd DOM001
Author: @igorpecovnik
Status: Preview
Domoticz remove
This operation will remove Domoticz.
Command:
armbian-config --cmd DOM002
Author: @igorpecovnik
Status: Preview
Domoticz purge with data folder
This operation will purge Domoticz.
Command:
armbian-config --cmd DOM003
Author: @igorpecovnik
Status: Preview
EVCC - solar charging automation
evcc is an energy management system with a focus on electromobility. The software controls your EV charger or smart plug. It communicates with your vehicle, inverter or home storage to make intelligent charging decisions. The software is open source and community-driven.
This operation will install solar charging automation.
Command:
armbian-config --cmd EVCC01
Author: @igorpecovnik
Status: Preview
=== "Access to the web interface"
The web interface is accessible via port **7070**:
- URL: `https://<your.IP>:7070`
- Admin password is generated at first web interface login
=== "Directories"
- Install directory: `/armbian/evcc`
- Site configuration directory: `/armbian/evcc/evcc.yaml`
=== "View logs"
```sh
docker logs -f evcc
```
EVCC - solar charging automation remove
This operation will remove solar charging automation.
Command:
armbian-config --cmd EVCC02
Author: @igorpecovnik
Status: Preview
EVCC purge with data folder
This operation will purge solar charging automation with data folder.
Command:
armbian-config --cmd EVCC03
Author: @igorpecovnik
Status: Preview