dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig

Move this option to Kconfig and update all boards.
Signed-off-by: Simon Glass <sjg@chromium.org>

Kconfig

@@ -56,6 +56,25 @@ config CC_OPTIMIZE_FOR_SIZE
 
 	  This option is enabled by default for U-Boot.
 
+config SYS_MALLOC_F
+	bool "Enable malloc() pool before relocation"
+	default 0x400
+	help
+	  Before relocation memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+	hex "Size of malloc() pool before relocation"
+	depends on SYS_MALLOC_F
+	default 0x400
+	help
+	  Before relocation memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
+
 menuconfig EXPERT
         bool "Configure standard U-Boot features (expert users)"
         help

arch/arm/cpu/armv7/exynos/Kconfig

@@ -80,6 +80,12 @@ config DM_SPI_FLASH
 config DM_GPIO
 	default y if !SPL_BUILD
 
+config SYS_MALLOC_F
+	default y if !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if !SPL_BUILD
+
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
 source "board/samsung/universal_c210/Kconfig"

arch/arm/cpu/armv7/omap3/Kconfig

@@ -102,6 +102,12 @@ config DM_GPIO
 config DM_SERIAL
 	default y if DM && !SPL_BUILD
 
+config SYS_MALLOC_F
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM && !SPL_BUILD
+
 config SYS_SOC
 	default "omap3"
 

arch/arm/cpu/armv7/tegra-common/Kconfig

@@ -17,6 +17,12 @@ config TEGRA124
 
 endchoice
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x1800
+
 config USE_PRIVATE_LIBGCC
 	default y if SPL_BUILD
 

arch/arm/cpu/armv7/uniphier/Kconfig

@@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD
 
 endchoice
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x2000
+
 config CMD_PINMON
 	bool "Enable boot mode pins monitor command"
 	default y

arch/x86/Kconfig

@@ -76,6 +76,12 @@ config DM_GPIO
 config DM_SERIAL
 	default y
 
+config SYS_MALLOC_F
+	default y
+
+config SYS_MALLOC_F_LEN
+	default 0x800
+
 config RAMBASE
 	hex
 	default 0x100000

board/ti/am335x/Kconfig

@@ -47,4 +47,10 @@ config DM_GPIO
 config DM_SERIAL
 	default y if DM && !SPL_BUILD
 
+config SYS_MALLOC_F
+	default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+	default 0x400 if DM && !SPL_BUILD
+
 endif

configs/Linksprite_pcDuino3_fdt_defconfig

@@ -13,3 +13,5 @@ CONFIG_OF_SEPARATE=y
 +S:CONFIG_DRAM_CLK=480
 +S:CONFIG_DRAM_ZQ=122
 +S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/am335x_igep0033_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/cm_fx6_defconfig

@@ -5,3 +5,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/cm_t335_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/gwventana_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6dlsabreauto_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6qsabreauto_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6qsabresd_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/mx6sxsabresd_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
 CONFIG_ARM=y
 CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/nokia_rx51_defconfig

@@ -4,3 +4,5 @@ CONFIG_TARGET_NOKIA_RX51=y
 CONFIG_DM=n
 CONFIG_DM_SERIAL=n
 CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pcm051_rev1_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV1"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pcm051_rev3_defconfig

@@ -2,3 +2,5 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="REV3"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400

configs/pengwyn_defconfig

@@ -1,3 +1,5 @@
 CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400