diff --git a/projects/ROCKNIX/devices/SM8550/linux/linux.aarch64.conf b/projects/ROCKNIX/devices/SM8550/linux/linux.aarch64.conf
index fe3e3572d5..18f9378621 100644
--- a/projects/ROCKNIX/devices/SM8550/linux/linux.aarch64.conf
+++ b/projects/ROCKNIX/devices/SM8550/linux/linux.aarch64.conf
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm64 6.16.4 Kernel Configuration
+# Linux/arm64 6.16.3 Kernel Configuration
 #
 CONFIG_CC_VERSION_TEXT="aarch64-rocknix-linux-gnueabi-gcc-14.2.0 (GCC) 14.2.0"
 CONFIG_CC_IS_GCC=y
@@ -11,8 +11,8 @@ CONFIG_AS_VERSION=24400
 CONFIG_LD_IS_BFD=y
 CONFIG_LD_VERSION=24400
 CONFIG_LLD_VERSION=0
-CONFIG_RUSTC_VERSION=108900
-CONFIG_RUSTC_LLVM_VERSION=200107
+CONFIG_RUSTC_VERSION=0
+CONFIG_RUSTC_LLVM_VERSION=0
 CONFIG_CC_CAN_LINK=y
 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
 CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
@@ -20,9 +20,6 @@ CONFIG_TOOLS_SUPPORT_RELR=y
 CONFIG_CC_HAS_ASM_INLINE=y
 CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
 CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
-CONFIG_RUSTC_HAS_COERCE_POINTEE=y
-CONFIG_RUSTC_HAS_SPAN_FILE=y
-CONFIG_RUSTC_HAS_UNNECESSARY_TRANSMUTES=y
 CONFIG_PAHOLE_VERSION=0
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
@@ -3313,7 +3310,8 @@ CONFIG_GPIO_GENERIC_PLATFORM=y
 # CONFIG_GPIO_GW_PLD is not set
 # CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCA9570 is not set
 # CONFIG_GPIO_PCF857X is not set
 # CONFIG_GPIO_TPIC2810 is not set
@@ -4247,6 +4245,7 @@ CONFIG_DRM_PANEL=y
 # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
 CONFIG_DRM_PANEL_AR06_4INCH=y
 CONFIG_DRM_PANEL_AR02_3INCH=y
+CONFIG_DRM_PANEL_AR11_5INCH=y
 # CONFIG_DRM_PANEL_ARM_VERSATILE is not set
 # CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
 # CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
diff --git a/projects/ROCKNIX/devices/SM8550/patches/linux/0053-gpu-panel-add-Pocket-DS-lower-panel-driver.patch b/projects/ROCKNIX/devices/SM8550/patches/linux/0053-gpu-panel-add-Pocket-DS-lower-panel-driver.patch
new file mode 100644
index 0000000000..8e6c62c95b
--- /dev/null
+++ b/projects/ROCKNIX/devices/SM8550/patches/linux/0053-gpu-panel-add-Pocket-DS-lower-panel-driver.patch
@@ -0,0 +1,341 @@
+diff -rupbN linux.orig/drivers/gpu/drm/panel/Kconfig linux/drivers/gpu/drm/panel/Kconfig
+--- linux.orig/drivers/gpu/drm/panel/Kconfig	2025-08-29 00:02:39.288684887 +0000
++++ linux/drivers/gpu/drm/panel/Kconfig	2025-08-29 19:45:04.120111724 +0000
+@@ -37,6 +37,16 @@ config DRM_PANEL_AR02_3INCH
+ 	  Say Y here if you want to enable support for Ayaneo Pocket DMG
+ 	  1080x1240 60hz Panel.
+ 
++config DRM_PANEL_AR11_5INCH
++       tristate "Ayaneo Pocket DS lower panel driver"
++       depends on OF
++       depends on DRM_MIPI_DSI
++       depends on BACKLIGHT_CLASS_DEVICE
++       select DRM_DISPLAY_HELPER
++       help
++         Say Y here if you want to enable support for Ayaneo Pocket DS
++         1024x768Panel.
++
+ config DRM_PANEL_ARM_VERSATILE
+ 	tristate "ARM Versatile panel driver"
+ 	depends on OF
+diff -rupbN linux.orig/drivers/gpu/drm/panel/Makefile linux/drivers/gpu/drm/panel/Makefile
+--- linux.orig/drivers/gpu/drm/panel/Makefile	2025-08-29 00:02:39.288684887 +0000
++++ linux/drivers/gpu/drm/panel/Makefile	2025-08-29 19:45:39.516633171 +0000
+@@ -2,6 +2,7 @@
+ obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o
+ obj-$(CONFIG_DRM_PANEL_AR06_4INCH) += panel-ar06-4inch.o
+ obj-$(CONFIG_DRM_PANEL_AR02_3INCH) += panel-ar02-3inch.o
++obj-$(CONFIG_DRM_PANEL_AR11_5INCH) += panel-ar11-5inch.o
+ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
+ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.o
+ obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
+diff -rupbN linux.orig/drivers/gpu/drm/panel/panel-ar11-5inch.c linux/drivers/gpu/drm/panel/panel-ar11-5inch.c
+--- linux.orig/drivers/gpu/drm/panel/panel-ar11-5inch.c	1970-01-01 00:00:00.000000000 +0000
++++ linux/drivers/gpu/drm/panel/panel-ar11-5inch.c	2025-08-29 21:48:05.618147842 +0000
+@@ -0,0 +1,306 @@
++// SPDX-License-Identifier: GPL-2.0-only
++// Copyright (c) 2025 FIXME
++// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
++//   Copyright (c) 2013, The Linux Foundation. All rights reserved. (FIXME)
++
++#include <linux/delay.h>
++#include <linux/gpio/consumer.h>
++#include <linux/mod_devicetable.h>
++#include <linux/module.h>
++#include <linux/regulator/consumer.h>
++
++#include <drm/drm_mipi_dsi.h>
++#include <drm/drm_modes.h>
++#include <drm/drm_panel.h>
++#include <drm/drm_probe_helper.h>
++
++struct ar11_5inch {
++	struct drm_panel panel;
++	struct mipi_dsi_device *dsi;
++	struct gpio_desc *reset_gpio;
++	struct gpio_desc *enable_gpio;
++	struct regulator_bulk_data *supplies;
++	enum drm_panel_orientation orientation;
++};
++
++static const struct regulator_bulk_data panel_supplies[] = {
++	{ .supply = "avdd" },
++	{ .supply = "vci" },
++	{ .supply = "vddio" },
++};
++
++static inline struct ar11_5inch *to_ar11_5inch(struct drm_panel *panel)
++{
++	return container_of(panel, struct ar11_5inch, panel);
++}
++
++static void ar11_5inch_reset(struct ar11_5inch *ctx)
++{
++	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
++	usleep_range(10000, 11000);
++	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
++	usleep_range(10000, 11000);
++	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
++	msleep(55);
++}
++
++static int ar11_5inch_on(struct ar11_5inch *ctx)
++{
++	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
++
++	ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
++
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb9, 0xf1, 0x12, 0x87);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb2, 0x00, 0x01, 0x78);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb3,
++				     0x10, 0x10, 0x28, 0x28, 0x03, 0xff, 0x00,
++				     0x00, 0x00, 0x00);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb4, 0x80);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb5, 0x0a, 0x0a);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb6, 0x90, 0x90);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb8, 0x76, 0x22, 0xf0, 0x13);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xba,
++				     0x33, 0x81, 0x05, 0xf9, 0x0e, 0x0e, 0x20,
++				     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++				     0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00,
++				     0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbc, 0x47);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbf,
++				     0x02, 0x10, 0x00, 0x80, 0x04);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0,
++				     0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x12,
++				     0x73, 0x00);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc1,
++				     0x55, 0x00, 0x32, 0x32, 0x77, 0xf1, 0xf7,
++				     0xf7, 0xcc, 0xcc, 0x7f, 0x7f, 0x11, 0x11,
++				     0x00, 0x00, 0x32);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc7,
++				     0xb8, 0x00, 0x0a, 0x10, 0x01, 0x09, 0x00,
++				     0x00, 0xed, 0xc5, 0x00, 0xa5);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc8, 0x10, 0x40, 0x1e, 0x03);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcc, 0x0b);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe0,
++				     0x00, 0x00, 0x00, 0x25, 0x31, 0x3f, 0x26,
++				     0x29, 0x04, 0x08, 0x0d, 0x0e, 0x12, 0x0f,
++				     0x11, 0x12, 0x18, 0x00, 0x00, 0x00, 0x25,
++				     0x31, 0x3f, 0x26, 0x29, 0x04, 0x08, 0x0d,
++				     0x0e, 0x12, 0x0f, 0x11, 0x12, 0x18);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe1,
++				     0x11, 0x11, 0x91, 0x00, 0x00, 0x00, 0x00);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe3,
++				     0x07, 0x07, 0x0b, 0x0b, 0x0b, 0x0b, 0x00,
++				     0x00, 0x00, 0x00, 0xff, 0x84, 0xc0, 0x10);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe9,
++				     0xc8, 0x10, 0x04, 0x04, 0x02, 0x80, 0x81,
++				     0x12, 0x31, 0x23, 0x2f, 0x80, 0x80, 0x81,
++				     0x27, 0x20, 0x00, 0x00, 0x0f, 0x00, 0x00,
++				     0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
++				     0x44, 0x00, 0x88, 0xff, 0x00, 0x22, 0x44,
++				     0x66, 0x88, 0x88, 0x88, 0x55, 0x11, 0x88,
++				     0xff, 0x11, 0x33, 0x55, 0x77, 0x88, 0x88,
++				     0x88, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
++				     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xea,
++				     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++				     0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x55,
++				     0xff, 0x88, 0x77, 0x55, 0x33, 0x11, 0x88,
++				     0x88, 0x88, 0x00, 0x44, 0xff, 0x88, 0x66,
++				     0x44, 0x22, 0x00, 0x88, 0x88, 0x88, 0x23,
++				     0x00, 0x00, 0x00, 0xec, 0x00, 0x00, 0x00,
++				     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++				     0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x80,
++				     0x81, 0x00, 0x00, 0x00, 0x00);
++	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xef, 0xff, 0xff, 0x01);
++	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
++	mipi_dsi_msleep(&dsi_ctx, 200);
++	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
++	mipi_dsi_msleep(&dsi_ctx, 120);
++
++	return dsi_ctx.accum_err;
++}
++
++static int ar11_5inch_off(struct ar11_5inch *ctx)
++{
++	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
++
++	ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
++
++	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
++	mipi_dsi_msleep(&dsi_ctx, 120);
++	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
++	mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
++
++	return dsi_ctx.accum_err;
++}
++
++static int ar11_5inch_prepare(struct drm_panel *panel)
++{
++	struct ar11_5inch *ctx = to_ar11_5inch(panel);
++	struct device *dev = &ctx->dsi->dev;
++	int ret;
++
++	ret = regulator_bulk_enable(ARRAY_SIZE(panel_supplies), ctx->supplies);
++	if (ret < 0) {
++		dev_err(panel->dev, "failed to enable regulators: %d\n", ret);
++		return ret;
++	}
++	msleep(20);
++
++	gpiod_set_value_cansleep(ctx->enable_gpio, 1);
++	msleep(20);
++
++	ar11_5inch_reset(ctx);
++
++	ret = ar11_5inch_on(ctx);
++	if (ret < 0) {
++		dev_err(dev, "Failed to initialize panel: %d\n", ret);
++		regulator_bulk_disable(ARRAY_SIZE(panel_supplies), ctx->supplies);
++		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int ar11_5inch_unprepare(struct drm_panel *panel)
++{
++	struct ar11_5inch *ctx = to_ar11_5inch(panel);
++	struct device *dev = &ctx->dsi->dev;
++	int ret;
++
++	ret = ar11_5inch_off(ctx);
++	if (ret < 0)
++		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
++
++	regulator_bulk_disable(ARRAY_SIZE(panel_supplies), ctx->supplies);
++	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
++
++	return 0;
++}
++
++static const struct drm_display_mode ar11_5inch_mode = {
++	.clock = (768 + 110 + 45 + 110) * (1024 + 18 + 6 + 16) * 60 / 1000,
++	.hdisplay = 768,
++	.hsync_start = 768 + 110,
++	.hsync_end = 768 + 110 + 45,
++	.htotal = 768 + 110 + 45 + 110,
++	.vdisplay = 1024,
++	.vsync_start = 1024 + 18,
++	.vsync_end = 1024 + 18 + 6,
++	.vtotal = 1024 + 18 + 6 + 16,
++	.width_mm = 0,
++	.height_mm = 0,
++	.type = DRM_MODE_TYPE_DRIVER,
++};
++
++static int ar11_5inch_get_modes(struct drm_panel *panel,
++				struct drm_connector *connector)
++{
++	return drm_connector_helper_get_modes_fixed(connector, &ar11_5inch_mode);
++}
++
++static enum drm_panel_orientation ar11_5inch_get_orientation(struct drm_panel *panel)
++{
++	struct ar11_5inch *ctx = to_ar11_5inch(panel);
++
++	return ctx->orientation;
++}
++
++static const struct drm_panel_funcs ar11_5inch_panel_funcs = {
++	.prepare = ar11_5inch_prepare,
++	.unprepare = ar11_5inch_unprepare,
++	.get_modes = ar11_5inch_get_modes,
++	.get_orientation = ar11_5inch_get_orientation,
++};
++
++static int ar11_5inch_probe(struct mipi_dsi_device *dsi)
++{
++	struct device *dev = &dsi->dev;
++	struct ar11_5inch *ctx;
++	int ret;
++
++	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
++	if (!ctx)
++		return -ENOMEM;
++
++	ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(panel_supplies),
++		panel_supplies, &ctx->supplies);
++	if (ret < 0){
++		return dev_err_probe(dev, ret, "Failed to get regulators\n");
++	}
++
++	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
++	if (IS_ERR(ctx->reset_gpio))
++		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
++				     "Failed to get reset-gpios\n");
++
++	ctx->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
++	if (IS_ERR(ctx->enable_gpio))
++		return dev_err_probe(dev, PTR_ERR(ctx->enable_gpio),
++				     "Failed to get enable-gpios\n");
++
++	ctx->dsi = dsi;
++	mipi_dsi_set_drvdata(dsi, ctx);
++
++	dsi->lanes = 4;
++	dsi->format = MIPI_DSI_FMT_RGB888;
++	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
++			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
++
++	/* Orientation */
++	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
++	if (ret < 0) {
++		dev_err(dev, "failed to get orientation %d\n", ret);
++		return ret;
++	}
++
++	drm_panel_init(&ctx->panel, dev, &ar11_5inch_panel_funcs,
++		       DRM_MODE_CONNECTOR_DSI);
++	ctx->panel.prepare_prev_first = true;
++
++	ret = drm_panel_of_backlight(&ctx->panel);
++	if (ret)
++		return dev_err_probe(dev, ret, "Failed to get backlight\n");
++
++	drm_panel_add(&ctx->panel);
++
++	ret = mipi_dsi_attach(dsi);
++	if (ret < 0) {
++		drm_panel_remove(&ctx->panel);
++		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
++	}
++
++	return 0;
++}
++
++static void ar11_5inch_remove(struct mipi_dsi_device *dsi)
++{
++	struct ar11_5inch *ctx = mipi_dsi_get_drvdata(dsi);
++	int ret;
++
++	ret = mipi_dsi_detach(dsi);
++	if (ret < 0)
++		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
++
++	drm_panel_remove(&ctx->panel);
++}
++
++static const struct of_device_id ar11_5inch_of_match[] = {
++	{ .compatible = "ayaneo,pocket-ds-secondary-panel" }, // FIXME
++	{ /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, ar11_5inch_of_match);
++
++static struct mipi_dsi_driver ar11_5inch_driver = {
++	.probe = ar11_5inch_probe,
++	.remove = ar11_5inch_remove,
++	.driver = {
++		.name = "panel-ar11-5inch",
++		.of_match_table = ar11_5inch_of_match,
++	},
++};
++module_mipi_dsi_driver(ar11_5inch_driver);
++
++MODULE_AUTHOR("linux-mdss-dsi-panel-driver-generator <fix@me>"); // FIXME
++MODULE_DESCRIPTION("DRM driver for ar11 5inch video mode dsi panel");
++MODULE_LICENSE("GPL");
diff --git a/projects/ROCKNIX/devices/SM8550/patches/linux/0214_arm64--dts--qcom--Add-AYANEO-Pocket-DS.patch b/projects/ROCKNIX/devices/SM8550/patches/linux/0214_arm64--dts--qcom--Add-AYANEO-Pocket-DS.patch
index 24da49f6f3..1750220aca 100644
--- a/projects/ROCKNIX/devices/SM8550/patches/linux/0214_arm64--dts--qcom--Add-AYANEO-Pocket-DS.patch
+++ b/projects/ROCKNIX/devices/SM8550/patches/linux/0214_arm64--dts--qcom--Add-AYANEO-Pocket-DS.patch
@@ -1,7 +1,7 @@
 diff -rupbN linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts linux/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts
 --- linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts	1970-01-01 00:00:00.000000000 +0000
 +++ linux/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts	2025-08-29 01:15:03.063872627 +0000
-@@ -0,0 +1,33 @@
+@@ -0,0 +1,200 @@
 +// SPDX-License-Identifier: BSD-3-Clause
 +/*
 + * Copyright (c) 2025, Teguh Sobirin.
@@ -17,12 +17,144 @@ diff -rupbN linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts linu
 +	qcom,board-id = <0x1000b 0x01>;
 +	qcom,msm-id = <0x258 0x20000>, <0x259 0x20000>;
 +	compatible = "ayaneo,pocketds", "qcom,qcs8550", "qcom,sm8550";
++
++	tca6424_vcc: regulator-tca6424-vcc {
++		compatible = "regulator-fixed";
++		regulator-name = "tca6424_vcc";
++
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++
++		gpio = <&tlmm 168 GPIO_ACTIVE_HIGH>;
++		enable-active-high;
++
++		//pinctrl-names = "default";
++		pinctrl-0 = <&tca6424_vcc_pin>;
++
++		regulator-state-mem {
++			regulator-off-in-suspend;
++		};
++	};
++};
++
++&tlmm {
++    panel_pwr_active: panel-pwr-active-state {
++        pins = "gpio152", "gpio153";
++        function = "gpio";
++        drive-strength = <8>;
++        bias-disable;
++        output-high;
++    };
++
++    sde_dsi1_active: sde-dsi1-active-state {
++        pins = "gpio137";
++        function = "gpio";
++        drive-strength = <8>;
++        bias-disable;
++        output-high;
++    };
++
++    sde_dsi1_suspend: sde-dsi1-suspend-state {
++        pins = "gpio137";
++        function = "gpio";
++        drive-strength = <2>;
++        bias-pull-down;
++    };
++
++	tca6424_vcc_pin: tca6424-vcc-pin {
++		pins = "gpio168";
++		function = "gpio";
++		drive-strength = <8>;
++		bias-pull-up;
++		output-high;
++	};
++
++	ts_rst_default: ts-rst-default-state {
++		pins = "gpio24";
++		function = "gpio";
++		bias-pull-up;
++		drive-strength = <8>;
++	};
++
++	ts_rst_sleep: ts-rst-sleep-state {
++		pins = "gpio24";
++		function = "gpio";
++		bias-pull-down;
++		drive-strength = <2>;
++	};
++
++	ts_int_default: ts-int-default-state {
++		pins = "gpio25";
++		function = "gpio";
++		bias-pull-up;
++		drive-strength = <8>;
++	};
++
++	ts_int_sleep: ts-int-sleep-state {
++		pins = "gpio25";
++		function = "gpio";
++		bias-pull-down;
++		drive-strength = <2>;
++	};
 +};
 +
 +&i2c0 {
 +   clock-frequency = <400000>;
 +	status = "okay";
 +
++	/* Screen power */
++	sgm3804: regulator@3e {
++		compatible = "sgmicro,sgm3804";
++		reg = <0x3e>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&panel_pwr_active>;
++		regulator-name = "panel-avdd";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>, <&tlmm 153 GPIO_ACTIVE_HIGH>;
++	};
++
++	/* Backlight */
++	backlight: backlight@2e {
++		compatible = "silergy,sy7758";
++		reg = <0x2e>;
++		status = "okay";
++	};
++
++	tca6408: tca64_20@20 {
++		gpio-controller;
++		compatible = "ti,tca6408";
++		status = "ok";
++		reg = <0x20>;
++		#gpio-cells = <0x02>;
++		vcc-supply = <&tca6424_vcc>;
++	};
++};
++
++&i2c4 {
++	clock-frequency = <400000>;
++	status = "okay";
++	touchscreen: touchscreen@38 {
++		compatible = "focaltech,ft5426";
++		reg = <0x38>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		interrupt-parent = <&tlmm>;
++		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++
++		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
++
++		vcc-supply = <&vreg_l14b_3p2>;
++		iovcc-supply = <&vreg_l12b_1p8>;
++
++		pinctrl-0 = <&ts_int_default &ts_rst_default>;
++		pinctrl-1 = <&ts_int_sleep &ts_rst_sleep>;
++		pinctrl-names = "default", "sleep";
++
++		touchscreen-size-x = <1080>;
++		touchscreen-size-y = <1920>;
++	};
 +};
 +
 +&display_panel {
@@ -35,3 +167,38 @@ diff -rupbN linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts linu
 +
 +	rotation = <270>;
 +};
++
++&mdss_dsi1 {
++	vdda-supply = <&vreg_l3e_1p2>;
++	status = "okay";
++
++	panel@0 {
++		compatible = "ayaneo,pocket-ds-secondary-panel";
++		reg = <0>;
++		pinctrl-0 = <&sde_dsi1_active>;
++		pinctrl-1 = <&sde_dsi1_suspend>;
++		pinctrl-names = "default", "sleep";
++
++		avdd-supply = <&sgm3804>;
++		enable-gpio = <&tca6408 0 GPIO_ACTIVE_HIGH>;
++		reset-gpios = <&tca6408 2 GPIO_ACTIVE_LOW>;
++		rotation = <90>;
++		backlight = <&backlight>;
++
++		port {
++			panel1_in: endpoint {
++				remote-endpoint = <&mdss_dsi1_out>;
++			};
++		};
++	};
++};
++
++&mdss_dsi1_out {
++	remote-endpoint = <&panel1_in>;
++	data-lanes = <0 1 2 3>;
++};
++
++&mdss_dsi1_phy {
++	vdds-supply = <&vreg_l1e_0p88>;
++	status = "okay";
++};