lirc: move out of remote

Signed-off-by: Stephan Raue <stephan@openelec.tv>

packages/sysutils/lirc/scripts/lircd_helper

@@ -0,0 +1,67 @@
+#!/bin/sh
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+ACTION=$(echo "$1")
+DEVICE=$(echo "$2" | cut -f1 -d:)
+DRIVER=$(echo "$2" | cut -f2 -d:)
+CONFIG=$(echo "$2" | cut -f3 -d:)
+
+case "$ACTION" in
+  add)
+    if [ "x$DRIVER" = "x" ]; then
+      exit 1;
+    fi
+
+    mkdir -p '/run/lirc'
+
+    if [ ! -e "/run/lirc/lircd-$DEVICE.pid" ]; then
+
+      LIRCD="/usr/sbin/lircd"
+      LIRCD_CONFIG="--uinput --driver=$DRIVER --device=/dev/$DEVICE"
+      LIRCD_CONFIG="$LIRCD_CONFIG --output=/run/lirc/lircd-$DEVICE"
+      LIRCD_CONFIG="$LIRCD_CONFIG --pidfile=/run/lirc/lircd-$DEVICE.pid"
+
+      if [ -e "/storage/.config/lircd.conf" ]; then
+        LIRCD_CONFIG="$LIRCD_CONFIG /storage/.config/lircd.conf"
+      elif [ -n "$CONFIG" ]; then
+        if [ -e "/storage/.config/$CONFIG" ]; then
+          LIRCD_CONFIG="$LIRCD_CONFIG /storage/.config/$CONFIG"
+        elif [ -e "/etc/lirc/$CONFIG" ]; then
+          LIRCD_CONFIG="$LIRCD_CONFIG /etc/lirc/$CONFIG"
+        else
+          exit 1
+        fi
+      else
+        exit 1
+      fi
+
+      exec $LIRCD $LIRCD_CONFIG
+    fi
+    ;;
+  remove)
+    if [ -e "/run/lirc/lircd-$DEVICE.pid" ]; then
+      PID=`cat /run/lirc/lircd-$DEVICE.pid`
+      if [ ! "x$PID" = "x" ]; then
+        kill $PID
+      fi
+    fi
+    ;;
+esac
+
+exit 0

packages/sysutils/lirc/scripts/lircd_wakeup_enable

@@ -0,0 +1,17 @@
+#!/bin/sh
+################################################################################
+# wakeup_enable
+################################################################################
+
+devpath=`readlink -f "/sys/${DEVPATH}"`
+while echo "${devpath}" | grep -q '^/sys/devices/' > /dev/null 2>&1 ; do
+    if test -e "${devpath}/power/wakeup" ; then
+        state=`cat "${devpath}/power/wakeup"`
+        if test "x${state}" = "xdisabled" ; then
+            echo "enabled" > "${devpath}/power/wakeup"
+        fi
+    fi
+    devpath=`dirname "${devpath}"`
+done
+
+exit 0