You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
Manjunath Goudar
d57ada0c37
With the multiplatform changes in arm-soc tree, it becomes
possible to enable the vt8500 platform at the same time
as other platforms that require a conflicting EHCI bus
glue. At the moment, this results in a warning like
drivers/usb/host/ehci-hcd.c:1277:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1257:0: note: this is the location of the previous definition
drivers/usb/host/ehci-omap.c:319:31: warning: 'ehci_hcd_omap_driver' defined but not used [-Wunused-variable]
and an ehci driver that only works on one of them.
With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the vt8500 bus glue.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
50 lines
1.5 KiB
Makefile
50 lines
1.5 KiB
Makefile
#
|
|
# Makefile for USB Host Controller Drivers
|
|
#
|
|
|
|
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
|
|
|
|
isp1760-y := isp1760-hcd.o isp1760-if.o
|
|
|
|
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
|
|
fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
|
|
|
|
fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
|
|
|
|
xhci-hcd-y := xhci.o xhci-mem.o
|
|
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
|
|
xhci-hcd-$(CONFIG_PCI) += xhci-pci.o
|
|
|
|
ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
|
|
xhci-hcd-y += xhci-plat.o
|
|
endif
|
|
|
|
obj-$(CONFIG_USB_WHCI_HCD) += whci/
|
|
|
|
obj-$(CONFIG_PCI) += pci-quirks.o
|
|
|
|
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
|
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
|
|
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
|
|
|
|
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_VT8500)+= ehci-vt8500.o
|
|
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
|
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
|
|
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
|
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
|
|
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
|
|
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
|
|
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
|
|
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
|
|
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
|
|
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
|
|
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
|
|
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
|
|
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
|
|
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
|
|
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
|
|
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
|
|
obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
|