Bin Liu 9298b4aad3 usb: musb: fix device hotplug behind hub ...

The commit 889ad3b "usb: musb: try a race-free wakeup" breaks device
hotplug enumeraitonn when the device is connected behind a hub while usb
autosuspend is enabled.

Adding finish_resume_work into runtime resume callback fixes the issue.

Also resume root hub is required to resume the bus from runtime suspend,
so move musb_host_resume_root_hub() back to its original location, where
handles RESUME interrupt.

Signed-off-by: Bin Liu <b-liu@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

2015-02-04 11:16:47 -06:00

..

am35x.c

usb: musb: Change end point selection to use new IO access

2014-11-25 08:47:06 -06:00

blackfin.c

usb: musb: blackfin: remove incorrect __exit_p()

2015-02-02 13:04:55 -06:00

blackfin.h

…

cppi_dma.c

usb: musb: dma: merge ->start/stop into create/destroy

2013-07-29 13:53:18 +03:00

cppi_dma.h

…

da8xx.c

usb: musb: Pass fifo_mode in platform data

2014-11-25 08:47:07 -06:00

davinci.c

usb: move the OTG state from the USB PHY to the OTG structure

2014-11-03 10:01:25 -06:00

davinci.h

…

jz4740.c

usb: musb: Pass fifo_mode in platform data

2014-11-25 08:47:07 -06:00

Kconfig

usb: musb: add omap-control dependency

2015-01-29 10:36:29 -06:00

Makefile

usb: musb: add support for JZ4740 usb device controller

2013-12-20 09:53:24 -06:00

musb_am335x.c

usb: musb: Fix panic upon musb_am335x module removal

2014-06-27 10:53:06 -05:00

musb_core.c

usb: musb: fix device hotplug behind hub

2015-02-04 11:16:47 -06:00

musb_core.h

usb: musb: Use IS_ENABLED for tusb6010

2014-11-25 08:47:07 -06:00

musb_cppi41.c

usb: musb: cppi41: improve rx channel abort routine

2015-01-27 09:34:58 -06:00

musb_debug.h

…

musb_debugfs.c

Merge tag 'v3.19-rc5' into next

2015-01-19 09:57:20 -06:00

musb_dma.h

usb: musb: introduce dma_channel.rx_packet_done

2014-06-30 14:26:24 -05:00

musb_dsps.c

usb: musb: Change end point selection to use new IO access

2014-11-25 08:47:06 -06:00

musb_gadget_ep0.c

usb: musb: gadget: use common is_selfpowered

2015-01-29 10:35:43 -06:00

musb_gadget.c

usb: musb: gadget: use common is_selfpowered

2015-01-29 10:35:43 -06:00

musb_gadget.h

…

musb_host.c

usb: musb: stuff leak of struct usb_hcd

2014-12-22 10:36:24 -06:00

musb_host.h

usb: musb: fix prototype for musb_port_reset

2013-12-20 15:05:43 -06:00

musb_io.h

usb: musb: Change end point selection to use new IO access

2014-11-25 08:47:06 -06:00

musb_regs.h

usb: musb: Use IS_ENABLED for tusb6010

2014-11-25 08:47:07 -06:00

musb_virthub.c

usb: musb: fix device hotplug behind hub

2015-02-04 11:16:47 -06:00

musbhsdma.c

usb: musb: Change end point selection to use new IO access

2014-11-25 08:47:06 -06:00

musbhsdma.h

…

omap2430.c

usb: move the OTG state from the USB PHY to the OTG structure

2014-11-03 10:01:25 -06:00

omap2430.h

…

tusb6010_omap.c

usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.

2014-05-16 12:16:31 -05:00

tusb6010.c

usb: musb: Change end point selection to use new IO access

2014-11-25 08:47:06 -06:00

tusb6010.h

usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.

2014-05-16 12:16:31 -05:00

ux500_dma.c

usb: musb: Change to use new IO access

2014-11-25 08:47:06 -06:00

ux500.c

usb: musb: Pass fifo_mode in platform data

2014-11-25 08:47:07 -06:00