Javier Martinez Canillas 934f1f4833 mmc: pwrseq_simple: Extend to support more pins ...

Many WLAN attached to a SDIO/MMC interface, needs more than one pin for
their reset sequence. For example, is very common for chips to have two
pins: one for reset and one for power enable.

This patch adds support for more reset pins to the pwrseq_simple driver
and instead hardcoding a fixed number, it uses the of_gpio_named_count()
since the MMC power sequence is only built when CONFIG_OF is enabled.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

2015-01-30 12:00:27 +01:00

..

bus.c

mmc: Add SDIO function devicetree subnode parsing

2015-01-19 09:56:26 +01:00

bus.h

mmc: rename dev_to_mmc_card() to mmc_dev_to_card()

2010-10-23 21:11:12 +08:00

core.c

mmc: Resolve BKOPS compatability issue

2015-01-29 11:15:12 +01:00

core.h

mmc: core: Simplify by adding mmc_execute_tuning()

2015-01-19 09:56:30 +01:00

debugfs.c

mmc: core: Use mmc_get_ext_csd() instead of mmc_send_ext_csd()

2014-11-10 12:40:44 +01:00

host.c

mmc: core: Initial support for MMC power sequences

2015-01-28 12:31:12 +01:00

host.h

mmc: start removing enable / disable API

2012-03-27 12:20:03 -04:00

Kconfig

mmc: core: Use MMC_UNSAFE_RESUME as default behavior

2014-02-13 22:58:15 -05:00

Makefile

mmc: pwrseq: Initial support for the simple MMC power sequence provider

2015-01-28 12:32:07 +01:00

mmc_ops.c

mmc: core: Make tuning block patterns static

2015-01-19 09:56:24 +01:00

mmc_ops.h

mmc: core: Add helper function for EXT_CSD support

2014-11-10 12:40:41 +01:00

mmc.c

mmc: Resolve BKOPS compatability issue

2015-01-29 11:15:12 +01:00

pwrseq_simple.c

mmc: pwrseq_simple: Extend to support more pins

2015-01-30 12:00:27 +01:00

pwrseq.c

mmc: pwrseq: Initial support for the simple MMC power sequence provider

2015-01-28 12:32:07 +01:00

pwrseq.h

mmc: pwrseq: Initial support for the simple MMC power sequence provider

2015-01-28 12:32:07 +01:00

quirks.c

mmc: quirks: Fixup debug message

2014-07-09 11:26:03 +02:00

sd_ops.c

mmc: sd: warn if card stays busy during init

2014-07-09 11:26:07 +02:00

sd_ops.h

mmc: add erase, secure erase, trim and secure trim operations

2010-08-12 08:43:30 -07:00

sd.c

mmc: core: Simplify by adding mmc_execute_tuning()

2015-01-19 09:56:30 +01:00

sd.h

mmc: drop the speed mode of card's state

2014-05-12 18:05:53 -04:00

sdio_bus.c

mmc: Add SDIO function devicetree subnode parsing

2015-01-19 09:56:26 +01:00

sdio_bus.h

…

sdio_cis.c

mmc: sdio: Change pr_warning to pr_warn_ratelimited

2012-07-22 15:25:48 -04:00

sdio_cis.h

…

sdio_io.c

mmc: sdio: Use multiple scatter/gather list

2012-12-06 13:54:43 -05:00

sdio_irq.c

mmc: Convert pr_warning to pr_warn

2014-09-24 10:13:09 +02:00

sdio_ops.c

mmc: sdio: Use multiple scatter/gather list

2012-12-06 13:54:43 -05:00

sdio_ops.h

sdio: recognize io card without powercycle

2010-03-12 15:52:28 -08:00

sdio.c

mmc: core: Simplify by adding mmc_execute_tuning()

2015-01-19 09:56:30 +01:00

slot-gpio.c

mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts

2015-01-19 09:56:29 +01:00

slot-gpio.h

mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core

2015-01-19 09:56:17 +01:00