Alexander Stein d25221525e W1: ds2490: Increase timeout when waiting for status ...

Adjust the bulk message timeout to the other ones (1000ms). Otherwise the
following dmesg errors can be seen on a Raspberry Pi:
[   31.492386] Failed to read 1-wire data from 0x81: err=-110.
[   31.504168] 0x81: count=-110, status:
[   31.613404] Failed to read 1-wire data from 0x81: err=-110.
[   31.621915] 0x81: count=-110, status:
[   43.260968] Failed to read 1-wire data from 0x81: err=-110.
[   43.270998] 0x81: count=-110, status:
[   43.379959] Failed to read 1-wire data from 0x81: err=-110.
[   43.388854] 0x81: count=-110, status:

Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2014-11-07 11:24:01 -08:00

..

ds1wm.c

w1/masters: use pr_* instead of printk

2014-06-19 17:46:51 -07:00

ds2482.c

w1/masters: use pr_* instead of printk

2014-06-19 17:46:51 -07:00

ds2490.c

W1: ds2490: Increase timeout when waiting for status

2014-11-07 11:24:01 -08:00

Kconfig

w1: mxc_w1: Enable driver compilation with COMPILE_TEST

2014-02-28 15:27:09 -08:00

Makefile

…

matrox_w1.c

w1: remove use of __devexit

2012-11-21 12:42:25 -08:00

mxc_w1.c

w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit()

2014-06-19 17:43:34 -07:00

omap_hdq.c

w1: omap-hdq: remove deprecated IRQF_DISABLED

2013-10-16 12:36:10 -07:00

w1-gpio.c

w1-gpio: handle of_get_gpio() returning -EPROBE_DEFER better

2014-02-15 12:08:38 -08:00