You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
Hauke Mehrtens
4785ffbdc9
This driver adds support for the PCIe 2.0 controller found on the BCMA bus. This controller can be found on (mostly) all Broadcom BCM470X / BCM5301X ARM SoCs. The driver found in the Broadcom SDK does some more stuff, like setting up some DMA memory areas, chaining MPS and MRRS to 512 and also some PHY changes like "improving" the PCIe jitter and doing some special initialization for the 3rd PCIe port. This was tested on a bcm4708 board with 2 PCIe ports and wireless cards connected to them. PCI_DOMAINS is needed by this driver, because normally there is more than one PCIe controller and without PCI_DOMAINS only the first controller gets registered. This controller gets 6 IRQs; the last one is trigged by all IRQ events. [bhelgaas: fix "GPLv2" MODULE_LICENSE typo] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Ray Jui <rjui@broadcom.com.com>
140 lines
3.7 KiB
Plaintext
140 lines
3.7 KiB
Plaintext
menu "PCI host controller drivers"
|
|
depends on PCI
|
|
|
|
config PCI_DRA7XX
|
|
bool "TI DRA7xx PCIe controller"
|
|
select PCIE_DW
|
|
depends on OF && HAS_IOMEM && TI_PIPE3
|
|
help
|
|
Enables support for the PCIe controller in the DRA7xx SoC. There
|
|
are two instances of PCIe controller in DRA7xx. This controller can
|
|
act both as EP and RC. This reuses the Designware core.
|
|
|
|
config PCI_MVEBU
|
|
bool "Marvell EBU PCIe controller"
|
|
depends on ARCH_MVEBU || ARCH_DOVE
|
|
depends on OF
|
|
|
|
config PCIE_DW
|
|
bool
|
|
|
|
config PCI_EXYNOS
|
|
bool "Samsung Exynos PCIe controller"
|
|
depends on SOC_EXYNOS5440
|
|
select PCIEPORTBUS
|
|
select PCIE_DW
|
|
|
|
config PCI_IMX6
|
|
bool "Freescale i.MX6 PCIe controller"
|
|
depends on SOC_IMX6Q
|
|
select PCIEPORTBUS
|
|
select PCIE_DW
|
|
|
|
config PCI_TEGRA
|
|
bool "NVIDIA Tegra PCIe controller"
|
|
depends on ARCH_TEGRA && !ARM64
|
|
help
|
|
Say Y here if you want support for the PCIe host controller found
|
|
on NVIDIA Tegra SoCs.
|
|
|
|
config PCI_RCAR_GEN2
|
|
bool "Renesas R-Car Gen2 Internal PCI controller"
|
|
depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
|
|
help
|
|
Say Y here if you want internal PCI support on R-Car Gen2 SoC.
|
|
There are 3 internal PCI controllers available with a single
|
|
built-in EHCI/OHCI host controller present on each one.
|
|
|
|
config PCI_RCAR_GEN2_PCIE
|
|
bool "Renesas R-Car PCIe controller"
|
|
depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
|
|
help
|
|
Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
|
|
|
|
config PCI_HOST_GENERIC
|
|
bool "Generic PCI host controller"
|
|
depends on ARM && OF
|
|
help
|
|
Say Y here if you want to support a simple generic PCI host
|
|
controller, such as the one emulated by kvmtool.
|
|
|
|
config PCIE_SPEAR13XX
|
|
bool "STMicroelectronics SPEAr PCIe controller"
|
|
depends on ARCH_SPEAR13XX
|
|
select PCIEPORTBUS
|
|
select PCIE_DW
|
|
help
|
|
Say Y here if you want PCIe support on SPEAr13XX SoCs.
|
|
|
|
config PCI_KEYSTONE
|
|
bool "TI Keystone PCIe controller"
|
|
depends on ARCH_KEYSTONE
|
|
select PCIE_DW
|
|
select PCIEPORTBUS
|
|
help
|
|
Say Y here if you want to enable PCI controller support on Keystone
|
|
SoCs. The PCI controller on Keystone is based on Designware hardware
|
|
and therefore the driver re-uses the Designware core functions to
|
|
implement the driver.
|
|
|
|
config PCIE_XILINX
|
|
bool "Xilinx AXI PCIe host bridge support"
|
|
depends on ARCH_ZYNQ
|
|
help
|
|
Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
|
|
Host Bridge driver.
|
|
|
|
config PCI_XGENE
|
|
bool "X-Gene PCIe controller"
|
|
depends on ARCH_XGENE
|
|
depends on OF
|
|
select PCIEPORTBUS
|
|
help
|
|
Say Y here if you want internal PCI support on APM X-Gene SoC.
|
|
There are 5 internal PCIe ports available. Each port is GEN3 capable
|
|
and have varied lanes from x1 to x8.
|
|
|
|
config PCI_LAYERSCAPE
|
|
bool "Freescale Layerscape PCIe controller"
|
|
depends on OF && ARM
|
|
select PCIE_DW
|
|
select MFD_SYSCON
|
|
help
|
|
Say Y here if you want PCIe controller support on Layerscape SoCs.
|
|
|
|
config PCI_VERSATILE
|
|
bool "ARM Versatile PB PCI controller"
|
|
depends on ARCH_VERSATILE
|
|
|
|
config PCIE_IPROC
|
|
tristate "Broadcom iProc PCIe controller"
|
|
depends on OF && ARM
|
|
default n
|
|
help
|
|
This enables the iProc PCIe core controller support for Broadcom's
|
|
iProc family of SoCs. An appropriate bus interface driver also needs
|
|
to be enabled
|
|
|
|
config PCIE_IPROC_PLATFORM
|
|
tristate "Broadcom iProc PCIe platform bus driver"
|
|
depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
|
|
depends on OF
|
|
select PCIE_IPROC
|
|
default ARCH_BCM_IPROC
|
|
help
|
|
Say Y here if you want to use the Broadcom iProc PCIe controller
|
|
through the generic platform bus interface
|
|
|
|
config PCIE_IPROC_BCMA
|
|
bool "Broadcom iProc PCIe BCMA bus driver"
|
|
depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
|
|
select PCIE_IPROC
|
|
select BCMA
|
|
select PCI_DOMAINS
|
|
default ARCH_BCM_5301X
|
|
help
|
|
Say Y here if you want to use the Broadcom iProc PCIe controller
|
|
through the BCMA bus interface
|
|
|
|
endmenu
|