John Fastabend 1f4a0244ff ixgbe: DCB, PFC not cleared until reset occurs ...

The PFC configuration is not cleared until the device is reset. This
has not been a problem because setting DCB attributes forced a
hardware reset. Now that we no longer require this reset to occur
PFC remains configured even after being disabled until the
device is reset.

This removes a goto in the PFC hardware set routines for 82598 and
82599 devices that was short circuiting the clear.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

2011-03-12 04:15:35 -08:00

..

ixgbe_82598.c

ixgbe: update PHY code to support 100Mbps as well as 1G/10G

2011-03-12 04:14:01 -08:00

ixgbe_82599.c

ixgbe: Enable flow control pause parameter auto-negotiation support

2011-03-07 18:06:43 -08:00

ixgbe_common.c

ixgbe: fix spelling errors

2011-03-07 18:08:25 -08:00

ixgbe_common.h

ixgbe: cleanup copyright string for 2011

2011-03-03 04:43:24 -08:00

ixgbe_dcb_82598.c

ixgbe: DCB, PFC not cleared until reset occurs

2011-03-12 04:15:35 -08:00

ixgbe_dcb_82598.h

ixgbe: cleanup copyright string for 2011

2011-03-03 04:43:24 -08:00

ixgbe_dcb_82599.c

ixgbe: DCB, PFC not cleared until reset occurs

2011-03-12 04:15:35 -08:00

ixgbe_dcb_82599.h

ixgbe: IEEE 802.1Qaz, implement priority assignment table

2011-03-12 04:12:54 -08:00

ixgbe_dcb_nl.c

ixgbe: IEEE 802.1Qaz, implement priority assignment table

2011-03-12 04:12:54 -08:00

ixgbe_dcb.c

ixgbe: DCB, set minimum bandwidth per traffic class

2011-03-12 04:14:48 -08:00

ixgbe_dcb.h

ixgbe: IEEE 802.1Qaz, implement priority assignment table

2011-03-12 04:12:54 -08:00

ixgbe_ethtool.c

ixgbe: fix setting and reporting of advertised speeds

2011-03-07 18:10:22 -08:00

ixgbe_fcoe.c

ixgbe: DCB remove ixgbe_fcoe_getapp routine

2011-03-12 04:11:11 -08:00

ixgbe_fcoe.h

ixgbe: add support to FCoE DDP in target mode

2011-03-07 18:04:35 -08:00

ixgbe_main.c

ixgbe: add support for VF Transmit rate limit using iproute2

2011-03-12 04:15:08 -08:00

ixgbe_mbx.c

ixgbe: remove timer reset to 0 on timeout

2011-03-12 04:13:41 -08:00

ixgbe_mbx.h

ixgbe: cleanup copyright string for 2011

2011-03-03 04:43:24 -08:00

ixgbe_phy.c

ixgbe: update PHY code to support 100Mbps as well as 1G/10G

2011-03-12 04:14:01 -08:00

ixgbe_phy.h

ixgbe: update PHY code to support 100Mbps as well as 1G/10G

2011-03-12 04:14:01 -08:00

ixgbe_sriov.c

ixgbe: add support for VF Transmit rate limit using iproute2

2011-03-12 04:15:08 -08:00

ixgbe_sriov.h

ixgbe: add support for VF Transmit rate limit using iproute2

2011-03-12 04:15:08 -08:00

ixgbe_type.h

ixgbe: add support for VF Transmit rate limit using iproute2

2011-03-12 04:15:08 -08:00

ixgbe_x540.c

ixgbe: add function description

2011-03-07 18:07:21 -08:00

ixgbe.h

ixgbe: add support for VF Transmit rate limit using iproute2

2011-03-12 04:15:08 -08:00

Makefile

ixgbe: add MAC and PHY support for x540

2010-11-16 19:27:16 -08:00