Commit Graph

415 Commits

Author SHA1 Message Date
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Al Viro 152a083666 new helper: mount_bdev()
... and switch of the obvious get_sb_bdev() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:13 -04:00
Linus Torvalds 7d2f280e75 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
  quota: Fix possible oops in __dquot_initialize()
  ext3: Update kernel-doc comments
  jbd/2: fixed typos
  ext2: fixed typo.
  ext3: Fix debug messages in ext3_group_extend()
  jbd: Convert atomic_inc() to get_bh()
  ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
  jbd: Fix debug message in do_get_write_access()
  jbd: Check return value of __getblk()
  ext3: Use DIV_ROUND_UP() on group desc block counting
  ext3: Return proper error code on ext3_fill_super()
  ext3: Remove unnecessary casts on bh->b_data
  ext3: Cleanup ext3_setup_super()
  quota: Fix issuing of warnings from dquot_transfer
  quota: fix dquot_disable vs dquot_transfer race v2
  jbd: Convert bitops to buffer fns
  ext3/jbd: Avoid WARN() messages when failing to write the superblock
  jbd: Use offset_in_page() instead of manual calculation
  jbd: Remove unnecessary goto statement
  jbd: Use printk_ratelimited() in journal_alloc_journal_head()
  ...
2010-10-27 20:13:18 -07:00
Namhyung Kim a4c18ad2ee ext3: Update kernel-doc comments
Update missing/broken argument descriptions and fix formatting.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:05 +02:00
Namhyung Kim db50d20b1d ext3: Fix debug messages in ext3_group_extend()
Fix a typo, break long lines and use E3FSBLK on ext3_fsblk_t.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:05 +02:00
Namhyung Kim bfa01dfbe0 ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:04 +02:00
Namhyung Kim 81a4e320e6 ext3: Use DIV_ROUND_UP() on group desc block counting
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:04 +02:00
Namhyung Kim 4569cd1b0d ext3: Return proper error code on ext3_fill_super()
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:03 +02:00
Namhyung Kim 57e94d8647 ext3: Remove unnecessary casts on bh->b_data
bh->b_data is already a pointer to char so casts to 'char *' should
be meaningless. Remove them.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:03 +02:00
Namhyung Kim df0d6b8ff1 ext3: Cleanup ext3_setup_super()
Fix mount-count check to emit warning only if s_max_mnt_count
is greater than 0 according to man tune2fs(8). Also removes
unnecessary casts.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:03 +02:00
Darrick J. Wong dff6825e9f ext3/jbd: Avoid WARN() messages when failing to write the superblock
This fixes a WARN backtrace in mark_buffer_dirty() that occurs during unmount
when the underlying block device is removed.  This bug has been seen on System
Z when removing all paths from a multipath-backed ext3 mount; on System P when
injecting enough PCI EEH errors to make the SCSI controller go offline; and
similar warnings have been seen (and patched) with ext2/ext4.

The super block update from a previous operation has marked the buffer as in
error, and the flag has to be cleared before doing the update. Similar changes
have been made to ext4 by commit 914258bf2c.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:02 +02:00
Al Viro 7de9c6ee3e new helper: ihold()
Clones an existing reference to inode; caller must already hold one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Christoph Hellwig ebdec241d5 fs: kill block_prepare_write
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions.  Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:18:20 -04:00
Linus Torvalds a2887097f2 Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...
2010-10-22 17:07:18 -07:00
Linus Torvalds 79f14b7c56 Merge branch 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
  BKL: remove BKL from freevxfs
  BKL: remove BKL from qnx4
  autofs4: Only declare function when CONFIG_COMPAT is defined
  autofs: Only declare function when CONFIG_COMPAT is defined
  ncpfs: Lock socket in ncpfs while setting its callbacks
  fs/locks.c: prepare for BKL removal
  BKL: Remove BKL from ncpfs
  BKL: Remove BKL from OCFS2
  BKL: Remove BKL from squashfs
  BKL: Remove BKL from jffs2
  BKL: Remove BKL from ecryptfs
  BKL: Remove BKL from afs
  BKL: Remove BKL from USB gadgetfs
  BKL: Remove BKL from autofs4
  BKL: Remove BKL from isofs
  BKL: Remove BKL from fat
  BKL: Remove BKL from ext2 filesystem
  BKL: Remove BKL from do_new_mount()
  BKL: Remove BKL from cgroup
  BKL: Remove BKL from NTFS
  ...
2010-10-22 10:52:01 -07:00
Jan Kara beb37b85b0 ext3: Fix lost extented attributes for inode with ino == 11
If a filesystem has inode size > 128 and someone deletes lost+found and
reuses inode 11 for some other file, extented attributes set for this
inode before umount will get lost after remounting the filesystem. This
is because extended attributes will get stored in an inode but ext3_iget
will ignore them due to workaround of a bug in an old mkfs.

Fix the problem by initializing i_extra_isize to 0 for freshly allocated
inodes where mkfs workaround in ext3_iget applies. This way these inodes
will always store extended attributes in a special block and no problems
occur.

The bug was spotted and a reproduction test provided by:
  Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com>

Reviewed-by: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-05 12:20:23 +02:00
Jan Blunck 77b54a46a8 BKL: Remove BKL from ext3_put_super() and ext3_remount()
The BKL lock is protecting the remounting against a potential call to
ext3_put_super(). This could not happen, since this is protected by the
s_umount rw semaphore of struct super_block.

Therefore I think the BKL is protecting nothing here.

Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-04 21:10:37 +02:00
Jan Blunck d646cf82e9 BKL: Remove BKL from ext3 fill_super()
The BKL is protecting nothing than two memory allocations here.

Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-04 21:10:36 +02:00
Jan Blunck db71922217 BKL: Explicitly add BKL around get_sb/fill_super
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.

I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.

do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.

Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.

[arnd: do not add the BKL to those file systems that already
       don't use it elsewhere]

Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-04 21:10:10 +02:00
Christoph Hellwig dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Patrick J. LoPresti 30ca22c70e ext3/ext4: Factor out disk addressability check
As part of adding support for OCFS2 to mount huge volumes, we need to
check that the sector_t and page cache of the system are capable of
addressing the entire volume.

An identical check already appears in ext3 and ext4.  This patch moves
the addressability check into its own function in fs/libfs.c and
modifies ext3 and ext4 to invoke it.

[Edited to -EINVAL instead of BUG_ON() for bad blocksize_bits -- Joel]

Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 08:41:42 -07:00
Linus Torvalds 5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Andreas Gruenbacher 2aec7c5232 mbcache: Remove unused features
The mbcache code was written to support a variable number of indexes,
but all the existing users use exactly one index.  Simplify to code to
support only that case.

There are also no users of the cache entry free operation, and none of
the users keep extra data in cache entries.  Remove those features as
well.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:45 -04:00
Al Viro ac14a95b52 convert ext3 to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:03 -04:00
Christoph Hellwig 1025774ce4 remove inode_setattr
Replace inode_setattr with opencoded variants of it in all callers.  This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

 spufs: explicitly checks for ATTR_SIZE earlier
 btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
 ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:37 -04:00