Chris Wilson
efdf7c0605
drm/i915: Rename request->list to link for consistency
...
We use "list" to denote the list and "link" to denote an element on that
list. Rename request->list to match this idiom.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-14-git-send-email-chris@chris-wilson.co.uk
2016-08-04 08:09:23 +01:00
Chris Wilson
96a945aa42
drm/i915: Move the common engine cleanup to intel_engine_cs.c
...
Now that we initialize the state to both legacy and execlists inside
intel_engine_cs, we should also clean up that state from the common
functions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470226756-24401-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
2016-08-03 14:01:12 +01:00
Chris Wilson
ad7bdb2b99
drm/i915: Rename engine->semaphore.sync_to, engine->sempahore.signal locals
...
In order to be more consistent with the rest of the request construction
and ring emission, use the common names for the ring and request.
Rather than using signaler_req, waiter_req, and intel_ring *wait, we use
plain req and ring.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-32-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-23-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:33 +01:00
Chris Wilson
ddf07be7a2
drm/i915: Simplify calling engine->sync_to
...
Since requests can no longer be generated as a side-effect of
intel_ring_begin(), we know that the seqno will be unchanged during
ring-emission. This predicatablity then means we do not have to check
for the seqno wrapping around whilst emitting the semaphore for
engine->sync_to().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-31-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-22-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:32 +01:00
Chris Wilson
618e4ca7b1
drm/i915/ringbuffer: Specialise SNB+ request emission for semaphores
...
As gen6_emit_request() only differs from i9xx_emit_request() when
semaphores are enabled, only use the specialised vfunc in that scenario.
v2: Reorder semaphore init so as to keep engine->emit_request default
vfunc selection compact.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-27-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-18-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:29 +01:00
Chris Wilson
b0411e7d45
drm/i915: Reuse legacy breadcrumbs + tail emission
...
As GEN6+ is now a simple variant on the basic breadcrumbs + tail write,
reuse the common code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-26-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-17-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:29 +01:00
Chris Wilson
9242f974dc
drm/i915: Stop passing caller's num_dwords to engine->semaphore.signal()
...
Rather than pass in the num_dwords that the caller wishes to use after
the signal command packet, split the breadcrumb emission into two phases
and have both the signal and breadcrumb individiually acquire space on
the ring. This makes the interface simpler for the reader, and will
simplify for patches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-25-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-16-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:28 +01:00
Chris Wilson
ddd66c5154
drm/i915: Unify request submission
...
Move request submission from emit_request into its own common vfunc
from i915_add_request().
v2: Convert I915_DISPATCH_flags to BIT(x) whilst passing
v3: Rename a few functions to match.
v4: Reenable execlists submission after disabling guc.
v5: Be aware that everyone calls i915_guc_submission_disable()!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-23-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-14-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:26 +01:00
Chris Wilson
8f9420184a
drm/i915: Move the modulus for ring emission to the register write
...
Space reservation is already safe with respect to the ring->size
modulus, but hardware only expects to see values in the range
0...ring->size-1 (inclusive) and so requires the modulus to prevent us
writing the value ring->size instead of 0. As this is only required for
the register itself, we can defer the modulus to the register update and
not perform it after every command packet. We keep the
intel_ring_advance() around in the code to provide demarcation for the
end-of-packet (which then can be compared against intel_ring_begin() as
the number of dwords emitted must match the reserved space).
v2: Assert that the ring size is a power-of-two to match assumptions in
the code. Simplify the comment before writing the tail value to explain
why the modulus is necessary.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Cc: Dave Gordon <david.s.gordon@intel.com >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-13-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:25 +01:00
Chris Wilson
c5efa1ad09
drm/i915: Convert engine->write_tail to operate on a request
...
If we rewrite the I915_WRITE_TAIL specialisation for the legacy
ringbuffer as submitting the request onto the ringbuffer, we can unify
the vfunc with both execlists and GuC in the next patch.
v2: Drop the modulus from the I915_WRITE_TAIL as it is currently being
applied in intel_ring_advance() after every command packet, and add a
comment explaining why we need the modulus at all.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-22-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-12-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:24 +01:00
Chris Wilson
803688babd
drm/i915: Unify legacy/execlists emission of MI_BATCHBUFFER_START
...
Both the ->dispatch_execbuffer and ->emit_bb_start callbacks do exactly
the same thing, add MI_BATCHBUFFER_START to the request's ringbuffer -
we need only one vfunc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-20-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-10-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:21 +01:00
Chris Wilson
7c9cf4e33a
drm/i915: Reduce engine->emit_flush() to a single mode parameter
...
Rather than passing a complete set of GPU cache domains for either
invalidation or for flushing, or even both, just pass a single parameter
to the engine->emit_flush to determine the required operations.
engine->emit_flush(GPU, 0) -> engine->emit_flush(EMIT_INVALIDATE)
engine->emit_flush(0, GPU) -> engine->emit_flush(EMIT_FLUSH)
engine->emit_flush(GPU, GPU) -> engine->emit_flush(EMIT_FLUSH | EMIT_INVALIDATE)
This allows us to extend the behaviour easily in future, for example if
we want just a command barrier without the overhead of flushing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Cc: Dave Gordon <david.s.gordon@intel.com >
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-8-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:19 +01:00
Chris Wilson
c7fe7d25ed
drm/i915: Remove obsolete engine->gpu_caches_dirty
...
Space for flushing the GPU cache prior to completing the request is
preallocated and so cannot fail - the GPU caches will always be flushed
along with the completed request. This means we no longer have to track
whether the GPU cache is dirty between batches like we had to with the
outstanding_lazy_seqno.
With the removal of the duplication in the per-backend entry points for
emitting the obsolete lazy flush, we can then further unify the
engine->emit_flush.
v2: Expand a bit on the legacy of gpu_caches_dirty
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-18-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-7-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:19 +01:00
Chris Wilson
aad29fbbb8
drm/i915: Rename intel_pin_and_map_ring()
...
For more consistent oop-naming, we would use intel_ring_verb, so pick
intel_ring_pin() and intel_ring_unpin().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-17-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-6-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:18 +01:00
Chris Wilson
32c04f16f0
drm/i915: Rename residual ringbuf parameters
...
Now that we have a clear ring/engine split and a struct intel_ring, we
no longer need the stopgap ringbuf names.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-16-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-5-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:17 +01:00
Chris Wilson
7e37f889b5
drm/i915: Rename struct intel_ringbuffer to struct intel_ring
...
The state stored in this struct is not only the information about the
buffer object, but the ring used to communicate with the hardware. Using
buffer here is overly specific and, for me at least, conflates with the
notion of buffer objects themselves.
s/struct intel_ringbuffer/struct intel_ring/
s/enum intel_ring_hangcheck/enum intel_engine_hangcheck/
s/describe_ctx_ringbuf()/describe_ctx_ring()/
s/intel_ring_get_active_head()/intel_engine_get_active_head()/
s/intel_ring_sync_index()/intel_engine_sync_index()/
s/intel_ring_init_seqno()/intel_engine_init_seqno()/
s/ring_stuck()/engine_stuck()/
s/intel_cleanup_engine()/intel_engine_cleanup()/
s/intel_stop_engine()/intel_engine_stop()/
s/intel_pin_and_map_ringbuffer_obj()/intel_pin_and_map_ring()/
s/intel_unpin_ringbuffer()/intel_unpin_ring()/
s/intel_engine_create_ringbuffer()/intel_engine_create_ring()/
s/intel_ring_flush_all_caches()/intel_engine_flush_all_caches()/
s/intel_ring_invalidate_all_caches()/intel_engine_invalidate_all_caches()/
s/intel_ringbuffer_free()/intel_ring_free()/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-15-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-4-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:16 +01:00
Chris Wilson
1dae2dfb0b
drm/i915: Rename request->ringbuf to request->ring
...
Now that we have disambuigated ring and engine, we can use the clearer
and more consistent name for the intel_ringbuffer pointer in the
request.
@@
struct drm_i915_gem_request *r;
@@
- r->ringbuf
+ r->ring
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-12-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-2-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:15 +01:00
Chris Wilson
b5321f309b
drm/i915: Unify intel_logical_ring_emit and intel_ring_emit
...
Both perform the same actions with more or less indirection, so just
unify the code.
v2: Add back a few intel_engine_cs locals
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-11-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-1-git-send-email-chris@chris-wilson.co.uk
2016-08-02 22:58:13 +01:00
Chris Wilson
33a051a5fc
drm/i915/cmdparser: Remove stray intel_engine_cs *ring
...
When we refer to intel_engine_cs, we want to use engine so as not to
confuse ourselves about ringbuffers.
v2: Rename all the functions as well, as well as a few more stray comments.
v3: Split the really long error message strings
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-6-git-send-email-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469606850-28659-1-git-send-email-chris@chris-wilson.co.uk
2016-07-27 16:23:05 +01:00
Dave Gordon
38a0f2db5b
drm/i915: rename 'ring' where it refers to an engine or engine_id
...
'ring' is an old deprecated term for a GPU engine. Chris Wilson wants to
use the name for what is currently known as an intel_ringbuffer, but it
will be dreadfully confusing if some rings are ringbuffers but other
rings are still engines. So this patch changes the names of a bunch of
parameters called 'ring' to either 'engine' or 'engine_id' according to
what they actually are.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469034967-15840-3-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk >
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
2016-07-21 09:59:41 +01:00
Mika Kuoppala
4ba9c1f7c7
drm/i915/gen9: Add WaInPlaceDecompressionHang
...
Add this workaround to prevent hang when in place compression
is used.
References: HSD#2135774
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com >
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com >
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
2016-07-20 16:10:20 +03:00
Chris Wilson
39df91905d
drm/i915: Convert i915_semaphores_is_enabled over to early sanitize
...
Rather than recomputing whether semaphores are enabled, we can do that
computation once during early initialisation as the i915.semaphores
module parameter is now read-only.
s/i915_semaphores_is_enabled/i915.semaphores/
v2: Add the state to the debug dmesg as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-10-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-9-git-send-email-chris@chris-wilson.co.uk
2016-07-20 13:40:43 +01:00
Chris Wilson
f2f0ed718b
drm/i915: Rename ring->virtual_start as ring->vaddr
...
Just a different colour to better match virtual addresses elsewhere.
s/ring->virtual_start/ring->vaddr/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-9-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Dave Gordon <david.s.gordon@intel.com >
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-8-git-send-email-chris@chris-wilson.co.uk
2016-07-20 13:40:39 +01:00
Chris Wilson
406ea8d22f
drm/i915: Treat ringbuffer writes as write to normal memory
...
Ringbuffers are now being written to either through LLC or WC paths, so
treating them as simply iomem is no longer adequate. However, for the
older !llc hardware, the hardware is documentated as treating the TAIL
register update as serialising, so we can relax the barriers when filling
the rings (but even if it were not, it is still an uncached register write
and so serialising anyway.).
For simplicity, let's ignore the iomem annotation.
v2: Remove iomem from ringbuffer->virtual_address
v3: And for good measure add iomem elsewhere to keep sparse happy
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com > #v2
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-8-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-7-git-send-email-chris@chris-wilson.co.uk
2016-07-20 13:40:14 +01:00
Chris Wilson
f8c417cdb1
drm/i915: Rename drm_gem_object_unreference in preparation for lockless free
...
Ultimately wraps kref_put(), so adopt its nomenclature for consistency
with other subsystems.
s/drm_gem_object_unreference/i915_gem_object_put/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk >
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-6-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com >
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-5-git-send-email-chris@chris-wilson.co.uk
2016-07-20 13:40:12 +01:00