This finally makes paravirt-ops able to compile and boot under x86_64.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
paravirt_pagetable_setup_{start,done}() are not used (yet) under x86_64,
and native_pagetable_setup_{start,done}() don't exist on x86_64. So they
don't need to be set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the __parainstructions section to vmlinux.lds.S.
It's needed for the patching system.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the constant PARAVIRT needs in asm_offsets_64.c
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch fills in the read and write cr8 fields with their
native version.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86_64 lacks a native_init_IRQ() function, so we turn the arch's
init_IRQ() function into a native construct
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We use a __stringify construction at paravirt_patch_64.c.
It's better practice to include the stringify header directly
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
currently when gart iommu is enabled by BIOS or previous we got
"
Checking aperture...
CPU 0: aperture @4000000 size 64MB
CPU 1: aperture @4000000 size 64MB
"
we should use use Node instead.
we will get
"
Checking aperture...
Node 0: aperture @4000000 size 64MB
Node 1: aperture @4000000 size 64MB
"
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the select_idle_routine() call to after the detect_ht() call at
identify_cpu() on 64-bit.
This change is for printing the polling idle and HT enabled warning
message properly.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The warning message at idle_setup() is never shown because
smp_num_sibling hasn't been updated at this point yet.
Move this polling idle and HT enabled warning to select_idle_routine().
I also implement this warning on 64-bit kernel.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi's patch
"
x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection
Need this in the next patch in time_init and that happens early.
This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.
"
calling early_init_amd in early_identify_cpu and identify_cpu two times.
this patch remove the one in identify_cpu
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On some machines, buggy BIOSes don't properly setup WB MTRRs to cover all
available RAM, meaning the last few megs (or even gigs) of memory will be
marked uncached. Since Linux tends to allocate from high memory addresses
first, this causes the machine to be unusably slow as soon as the kernel
starts really using memory (i.e. right around init time).
This patch works around the problem by scanning the MTRRs at boot and
figuring out whether the current end_pfn value (setup by early e820 code)
goes beyond the highest WB MTRR range, and if so, trimming it to match. A
fairly obnoxious KERN_WARNING is printed too, letting the user know that
not all of their memory is available due to a likely BIOS bug.
Something similar could be done on i386 if needed, but the boot ordering
would be slightly different, since the MTRR code on i386 depends on the
boot_cpu_data structure being setup.
This patch fixes a bug in the last patch that caused the code to run on
non-Intel machines (AMD machines apparently don't need it and it's untested
on other non-Intel machines, so best keep it off).
Further enhancements and fixes from:
Yinghai Lu <Yinghai.Lu@Sun.COM>
Andi Kleen <ak@suse.de>
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
They now look like:
hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]
This makes it easier to pinpoint bugs to specific libraries.
And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.
Relies on earlier patch to shorten the printk formats.
They are often now longer than 80 characters, but I think that's worth it.
[includes fix from Eric Dumazet to check d_path error value]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the kernel panics early for some unrelated reason
there would be eventually an early exception inside panic because
clear_local_APIC tried to disable the not yet mapped APIC.
Check for that explicitely.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.
Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.
This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.
v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On x86-64 there are several memory allocations before bootmem. To avoid
them stomping on each other they used to be all hard coded in bad_area().
Replace this with an array that is filled as needed.
This cleans up the code considerably and allows to expand its use.
Cc: peterz@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adding the address of the faulting library missed removing a
line ending from X86_32.
Also update the shorter printk format for X86_32 in fault_64.c
to make it easier to se the remaining differences.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Previously there was a AMD specific quirk to handle the case of
AMD Fam10h MWAIT not supporting any C states. But it turns out
that CPUID already has ways to detectly detect that without
using special quirks.
The new code simply checks if MWAIT supports at least C1 and doesn't
use it if it doesn't. No more vendor specific code.
Note this is does not simply clear MWAIT because MWAIT can be still
useful even without C states.
Credit goes to Ben Serebrin for pointing out the (nearly) obvious.
Cc: "Andreas Herrmann" <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Previously it was only run for Intel CPUs, but AMD Fam10h implements MWAIT too.
This matches 64bit behaviour.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Choose a less generic name for such a special case. Add
a comment explaining the odd use in X86_32.
Change the one user of stack_pointer.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the EXPORT_SYMBOL for:
x86_cpu_to_node_map_init
x86_cpu_to_node_map_early_ptr
... thus fixing the section mismatch problem.
Also, the mem -> node hash lookup is fixed.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
WARNING: vmlinux.o(__ksymtab+0x670): Section mismatch: reference to .init.data:x86_cpu_to_node_map_init (between '__ksymtab_x86_cpu_to_node_map_init' and '__ksymtab_node_data')
Cc: Matthew Dobson <colpatch@us.ibm.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Eduardo Habkost
Glauber de Oliveira Costa
Yinghai Lu
Hiroshi Shimamoto
Michael Opdenacker
Jesse Barnes
Andi Kleen
Harvey Harrison
travis@sgi.com
Andrew Morton