Commit Graph

195306 Commits

Author SHA1 Message Date
Tejun Heo 8930ff254a libata-sff: clean up inheritance in several drivers
1. pata_cmd640 is PIO only.  Inherit from sff.

2. pata_macio is BMDMA.  Inherit from bmdma and drop explicit
   bmdma_mode_filter() setting.

3. In sata_mv, unlike mv5, mv6 is BMDMA.  Inherit from bmdma and
   don't clear ->post_internal_cmd().

4. bf54x and icside are quasi-BMDMA controllers which don't use the
   standard BMDMA registers so they don't initialize bmdma_addr and
   inherit from sff to avoid the default mode_filter which disables
   DMA modes if bmdma_addr is not initialized.

For 2 and 3, this patch makes the drivers explicitly specify
->mode_filter to ATA_OP_NULL while inheriting from ata_bmdma_port_ops.
These will be removed by the next patch.

This patch makes all and only BMDMA drivers inherit from
ata_bmdma_port_ops to ease further SFF/BMDMA separation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-19 13:31:29 -04:00
Dmitry Torokhov 83ba9ea8a0 Input: synaptics - set dimensions as reported by firmware
Newer Synaptics firmware allows to query maximim dimensions reported by
device, let's use this data.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:15:29 -07:00
Dmitry Torokhov a083632eaf Input: elantech - relax signature checks
Apparently there are Elantech touchpads that report non-zero in the 2nd byte
of their signature. Adjust the detection routine so that if 2nd byte is
zero and 3rd byte contains value that is not a valid report rate, we still
assume that signature is valid.

Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:15:13 -07:00
Dmitry Torokhov d4ae84a84b Input: elantech - enforce common prefix on messages
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:15:02 -07:00
Julia Lawall f8300ab8c3 Input: wistron_btns - switch to using kmemdup()
Use kmemdup when some other buffer is immediately copied into the
allocated region.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:14:38 -07:00
Julia Lawall 641d446f89 Input: usbtouchscreen - switch to using kmemdup()
Use kmemdup when some other buffer is immediately copied into the
allocated region.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:14:31 -07:00
Jacob Pan 685afae025 Input: do not force selecting i8042 on Moorestown
Moorestown does not have i8042 based keyboard controller, so give
an option to deselect i8042 for non-pc mid.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:14:25 -07:00
Paul Fox a2056ffd4a Input: Documentation/sysrq.txt - update KEY_SYSRQ info
While setting up sysrq operation on the XO laptop (which lacks a SysRq
key), i realized that the documentation was quite out of date.

Change documentation of SysRq to reflect current KEY_SYSRQ value.

Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:14:15 -07:00
Haojian Zhuang ee6e54e2ae Input: 88pm860x_onkey - remove invalid irq number assignment
Irq number of onkey is assigned twice. The second assignment is wrong.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:14:10 -07:00
Matthew Garrett dba06b839a Input: i8042 - add a PNP entry to the aux device list
Windows checks for an ALPS PS/2 device in PNP. Add it on the off-chance
that there's a machine that expresses this without also providing a
compatibility ID.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:14:04 -07:00
Matthew Garrett 09fac079d9 Input: i8042 - add some extra PNP keyboard types
Some Japanese machines declare their keyboard with a different PNP ID.
Add it to the list of probed device IDs. While we're at it, add all the
other IDs that Windows binds to - we'll probably never see them in the
real world, but it doesn't hurt.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:13:50 -07:00
Manuel Lauss af8b01b039 Input: wm9712 - fix wm97xx_set_gpio() logic
WM97XX_GPIO_HIGH is not a bitmap and should to be treated as such.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19 10:13:35 -07:00
Dmitry Torokhov 8d0bc2b456 Merge commit 'v2.6.34' into next 2010-05-19 10:12:41 -07:00
Mauro Carvalho Chehab e8d0416796 V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers
Fix all device drivers to use the video_drvdata function instead of
maintaining a local list of minor to private data mappings. Call
video_set_drvdata to register the driver private pointer when not
already done.

Where applicable, the local list of mappings is completely removed when
it becomes unused.

[mchehab.redhat.com: patch broke into two. This one changes just tm6000]

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:18 -03:00
Randy Dunlap 6b46c3977c V4L/DVB: vivi and mem2mem_testdev need slab.h to build
Fix vivi and mem2mem_testdev build errors: need to #include <linux/slab.h>:

drivers/media/video/vivi.c:1144: error: implicit declaration of function 'kfree'
drivers/media/video/vivi.c:1156: error: implicit declaration of function 'kzalloc'
drivers/media/video/vivi.c:1156: warning: assignment makes pointer from integer without a cast
drivers/media/video/mem2mem_testdev.c:862: error: implicit declaration of function 'kzalloc'
drivers/media/video/mem2mem_testdev.c:862: warning: assignment makes pointer from integer without a cast
drivers/media/video/mem2mem_testdev.c:874: error: implicit declaration of function 'kfree'
drivers/media/video/mem2mem_testdev.c:944: warning: assignment makes pointer from integer without a cast

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:18 -03:00
Stefan Ringel 3c7c5e9e89 V4L/DVB: tm6000: bugfix image position
bugfix incorrect image and line position in videobuffer

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:17 -03:00
Jarod Wilson 083e472176 V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET
On Tue, May 04, 2010 at 06:06:41PM +0200, Dan Carpenter wrote:
> On Tue, May 04, 2010 at 10:03:18AM -0400, Jarod Wilson wrote:
> > @@ -1205,7 +1204,7 @@ static u32 imon_panel_key_lookup(u64 hw_code)
> >  		if (imon_panel_key_table[i].hw_code == (code | 0xffee))
> >  			break;
> >
> > -	keycode = imon_panel_key_table[i % IMON_KEY_RELEASE_OFFSET].keycode;
> > +	keycode = imon_panel_key_table[i].keycode;
> >
> >  	return keycode;
> >  }
>
> There is still potentially a problem here because if we don't hit the
> break statement, then we're one past the end of the array.

D'oh. Okay, here's v2, should fix that buglet too.

This hack was used when the imon driver was using internal key lookup
routines, but became dead weight when the driver was converted to use
ir-core's key lookup routines. These bits simply didn't get removed,
drop 'em now.

Pointed out by Dan Carpenter.

v2: fix possible attempt to access beyond end of key table array,
also pointed out by Dan.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:17 -03:00
Stefan Ringel 9986da291b V4L/DVB: tm6000: README - add vbi
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:16 -03:00
Mauro Carvalho Chehab 64561a3883 V4L/DVB: Fix unlock logic at medusa_video_init
As reported by Dan Carpenter:
> This was my patch:  "cx25821: fix double unlock in medusa_video_init()"
>
> It accidentally got merged two times.  The version from the staging tree
> is not correct.  Please can you revert it:
> 7a02f549fc "Staging: cx25821: fix double
> unlock in medusa_video_init()"

After reviewing the logic at the function, instead of just adding a patch to
revert the wrong one, the better is to apply a different logic: add a goto
that will always unlock and return the error.

This simplifies the code a little bit, and, instead of just return -EINVAL,
it will return the error condition reported by the called functions.

This patch is folded with another patch from Dan that added one missing
goto.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:16 -03:00
matthieu castet e36309f54a V4L/DVB: fix dvb frontend lockup
If my dvb device is removed while in use, I got the following oops:

[ 4920.484084] Call Trace:
[ 4920.484102]  [<c102daad>] ? default_wake_function+0x0/0x8
[ 4920.484147]  [<f8cb09e1>] ? dvb_unregister_frontend+0x95/0xcc [dvb_core]
[ 4920.484157]  [<c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484168]  [<f8dd1af2>] ? dvb_usb_adapter_frontend_exit+0x12/0x21 [dvb_usb]
[ 4920.484176]  [<f8dd12f1>] ? dvb_usb_exit+0x26/0x88 [dvb_usb]
[ 4920.484184]  [<f8dd138d>] ? dvb_usb_device_exit+0x3a/0x4a [dvb_usb]
[ 4920.484217]  [<f7fe1b08>] ? usb_unbind_interface+0x3f/0xb4 [usbcore]
[ 4920.484227]  [<c11a4178>] ? __device_release_driver+0x74/0xb7
[ 4920.484233]  [<c11a4247>] ? device_release_driver+0x15/0x1e
[ 4920.484243]  [<c11a3a33>] ? bus_remove_device+0x6e/0x87
[ 4920.484249]  [<c11a26d6>] ? device_del+0xfa/0x152
[ 4920.484264]  [<f7fdf609>] ? usb_disable_device+0x59/0xb9 [usbcore]
[ 4920.484279]  [<f7fdb9ee>] ? usb_disconnect+0x70/0xdc [usbcore]
[ 4920.484294]  [<f7fdc728>] ? hub_thread+0x521/0xe1d [usbcore]
[ 4920.484301]  [<c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484316]  [<f7fdc207>] ? hub_thread+0x0/0xe1d [usbcore]
[ 4920.484321]  [<c10441e0>] ? kthread+0x61/0x66
[ 4920.484327]  [<c104417f>] ? kthread+0x0/0x66
[ 4920.484336]  [<c1003d47>] ? kernel_thread_helper+0x7/0x10

If there are users (for example users == -2) :
 - dvb_unregister_frontend :
 - stop kernel thread with dvb_frontend_stop :
  - fepriv->exit = 1;
  - thread loop catch stop event and break while loop
  - fepriv->thread = NULL; and fepriv->exit = 0;
 - dvb_unregister_frontend wait on "fepriv->dvbdev->wait_queue" that fepriv->dvbdev->users==-1.
The user finish :
 - dvb_frontend_release - set users to -1
 - don't wait wait_queue because fepriv->exit != 1

=> dvb_unregister_frontend never exit the wait queue.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:15 -03:00
Dan Carpenter 8b661b508b V4L/DVB: s2255drv: remove dead code
My concern initially was we dereference "dev" in the parameter list to
s2255_dev_err() but it turns out that code path is never used.
The s2255_stop_readpipe() is only called from one place and "dev" is
never null.  So this patch just removes the whole condition here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: linux-dev@sensoray.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:14 -03:00
Dan Carpenter aab9796f55 V4L/DVB: s2255drv: return if vdev not found
The original code didn't handle the case where vdev was not found so I
added a check for that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: linux-dev@sensoray.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:14 -03:00
Dan Carpenter b9245d80c3 V4L/DVB: ov511: cleanup: remove unneeded null check
We dereference "ov" unconditionally throughout the function so there is
no way it can be NULL here.  This code has been around for ages so if
it were possible for "ov" to be NULL someone would have complained.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:13 -03:00
Dan Carpenter 16ee9bb100 V4L/DVB: media/mem2mem: dereferencing free memory
We dereferenced "ctx" on the error path.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:13 -03:00
Peter Huewe a7b39036cf V4L/DVB: media/IR: Add missing include file to rc-map.c
This patch adds a missing include linux/delay.h to prevent
build failures[1-5]

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:12 -03:00