Commit Graph

1982 Commits

Author SHA1 Message Date
Jan Kara f2d50a65c9 ext4: deprecate max_writeback_mb_bump sysfs attribute
This attribute is now unused so deprecate it.  We still show the old
default value to keep some compatibility but we don't allow writing to
that attribute anymore.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:51:16 -04:00
Jan Kara 39bba40b7a ext4: stop messing with nr_to_write in ext4_da_writepages()
Writeback code got better in how it submits IO and now the number of
pages requested to be written is usually higher than original 1024.
The number is now dynamically computed based on observed throughput
and is set to be about 0.5 s worth of writeback.  E.g. on ordinary
SATA drive this ends up somewhere around 10000 as my testing shows.
So remove the unnecessary smarts from ext4_da_writepages().

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:50:24 -04:00
Jan Kara 5fe2fe895a ext4: provide wrappers for transaction reservation calls
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:37:50 -04:00
Jan Kara 8f7d89f368 jbd2: transaction reservation support
In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues.  It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing.  Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:35:11 -04:00
Jan Kara 97a851ed71 ext4: use io_end for multiple bios
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.

Bugs in ENOMEM handling found by Linux File System Verification project
(linuxtesting.org) and fixed by Alexey Khoroshilov
<khoroshilov@ispras.ru>.

CC: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 11:58:58 -04:00
Jan Kara 8af8eecc13 ext4: fix overflow when counting used blocks on 32-bit architectures
The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-31 19:39:56 -04:00
Jan Kara a60697f411 ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs
On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-31 19:38:56 -04:00
Jan Kara e7293fd146 ext4: fix overflows in SEEK_HOLE, SEEK_DATA implementations
ext4_lblk_t is just u32 so multiplying it by blocksize can easily
overflow for files larger than 4 GB. Fix that by properly typing the
block offsets before shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-05-31 19:37:56 -04:00
Jan Kara eaf3793728 ext4: fix data offset overflow on 32-bit archs in ext4_inline_data_fiemap()
On 32-bit archs when sector_t is defined as 32-bit the logic computing
data offset in ext4_inline_data_fiemap(). Fix that by properly typing
the shifted value.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-31 19:33:42 -04:00
Paul Taysom 566370a2e5 ext4: suppress ext4 orphan messages on mount
Suppress the messages releating to processing the ext4 orphan list
("truncating inode" and "deleting unreferenced inode") unless the
debug option is on, since otherwise they end up taking up space in the
log that could be used for more useful information.

Tested by opening several files, unlinking them, then
crashing the system, rebooting the system and examining
/var/log/messages.

Addresses the problem described in http://crbug.com/220976

Signed-off-by: Paul Taysom <taysom@chromium.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-05-28 07:51:21 -04:00
Lukas Czerner d23142c627 ext4: make punch hole code path work with bigalloc
Currently punch hole is disabled in file systems with bigalloc
feature enabled. However the recent changes in punch hole patch should
make it easier to support punching holes on bigalloc enabled file
systems.

This commit changes partial_cluster handling in ext4_remove_blocks(),
ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently
partial_cluster is unsigned long long type and it makes sure that we
will free the partial cluster if all extents has been released from that
cluster. However it has been specifically designed only for truncate.

With punch hole we can be freeing just some extents in the cluster
leaving the rest untouched. So we have to make sure that we will notice
cluster which still has some extents. To do this I've changed
partial_cluster to be signed long long type. The only scenario where
this could be a problem is when cluster_size == block size, however in
that case there would not be any partial clusters so we're safe. For
bigger clusters the signed type is enough. Now we use the negative value
in partial_cluster to mark such cluster used, hence we know that we must
not free it even if all other extents has been freed from such cluster.

This scenario can be described in simple diagram:

|FFF...FF..FF.UUU|
 ^----------^
  punch hole

. - free space
| - cluster boundary
F - freed extent
U - used extent

Also update respective tracepoints to use signed long long type for
partial_cluster.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:33:35 -04:00
Lukas Czerner 61801325f7 ext4: update ext4_ext_remove_space trace point
Add "end" variable.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner 78fb9cdf03 ext4: remove unused code from ext4_remove_blocks()
The "head removal" branch in the condition is never used in any code
path in ext4 since the function only caller ext4_ext_rm_leaf() will make
sure that the extent is properly split before removing blocks. Note that
there is a bug in this branch anyway.

This commit removes the unused code completely and makes use of
ext4_error() instead of printk if dubious range is provided.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner c121ffd013 ext4: remove unused discard_partial_page_buffers
The discard_partial_page_buffers is no longer used anywhere so we can
simply remove it including the *_no_lock variant and
EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED define.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner a87dd18ce2 ext4: use ext4_zero_partial_blocks in punch_hole
We're doing to get rid of ext4_discard_partial_page_buffers() since it is
duplicating some code and also partially duplicating work of
truncate_pagecache_range(), moreover the old implementation was much
clearer.

Now when the truncate_inode_pages_range() can handle truncating non page
aligned regions we can use this to invalidate and zero out block aligned
region of the punched out range and then use ext4_block_truncate_page()
to zero the unaligned blocks on the start and end of the range. This
will greatly simplify the punch hole code. Moreover after this commit we
can get rid of the ext4_discard_partial_page_buffers() completely.

We also introduce function ext4_prepare_punch_hole() to do come common
operations before we attempt to do the actual punch hole on
indirect or extent file which saves us some code duplication.

This has been tested on ppc64 with 1k block size with fsx and xfstests
without any problems.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner 55f252c9f5 ext4: truncate_inode_pages() in orphan cleanup path
Currently we do not tell mm to zero out tail of the page before truncate
in orphan_cleanup(). This is ok, because the page should not be
uptodate, however this may eventually change and I might cause problems.

Call truncate_inode_pages() as precautionary measure. Thanks Jan Kara
for pointing this out.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner eb3544c6fc Revert "ext4: fix fsx truncate failure"
This reverts commit 189e868fa8.

This commit reintroduces the use of ext4_block_truncate_page() in ext4
truncate operation instead of ext4_discard_partial_page_buffers().

The statement in the commit description that the truncate operation only
zero block unaligned portion of the last page is not exactly right,
since truncate_pagecache_range() also zeroes and invalidate the unaligned
portion of the page. Then there is no need to zero and unmap it once more
and ext4_block_truncate_page() was doing the right job, although we
still need to update the buffer head containing the last block, which is
exactly what ext4_block_truncate_page() is doing.

Moreover the problem described in the commit is fixed more properly with
commit

15291164b2
	jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer

This was tested on ppc64 machine with block size of 1024 bytes without
any problems.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner 0713ed0cde ext4: Call ext4_jbd2_file_inode() after zeroing block
In data=ordered mode we should call ext4_jbd2_file_inode() so that crash
after the truncate transaction has committed does not expose stall data
in the tail of the block.

Thanks Jan Kara for pointing that out.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner d863dc3614 Revert "ext4: remove no longer used functions in inode.c"
This reverts commit ccb4d7af91.

This commit reintroduces functions ext4_block_truncate_page() and
ext4_block_zero_page_range() which has been previously removed in favour
of ext4_discard_partial_page_buffers().

In future commits we want to reintroduce those function and remove
ext4_discard_partial_page_buffers() since it is duplicating some code
and also partially duplicating work of truncate_pagecache_range(),
moreover the old implementation was much clearer.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-27 23:32:35 -04:00
Lukas Czerner ca99fdd26b ext4: use ->invalidatepage() length argument
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in all ext4 invalidatepage routines.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-21 23:25:01 -04:00
Lukas Czerner 259709b07d jbd2: change jbd2_journal_invalidatepage to accept length
invalidatepage now accepts range to invalidate and there are two file
system using jbd2 also implementing punch hole feature which can benefit
from this. We need to implement the same thing for jbd2 layer in order to
allow those file system take benefit of this functionality.

This commit adds length argument to the jbd2_journal_invalidatepage()
and updates all instances in ext4 and ocfs2.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-05-21 23:20:03 -04:00
Lukas Czerner d47992f86b mm: change invalidatepage prototype to accept length
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.

Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).

This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.

We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.

Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
2013-05-21 23:17:23 -04:00
Linus Torvalds b973425cbb Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
 "Fixed regressions (two stability regressions and a performance
  regression) introduced during the 3.10-rc1 merge window.

  Also included is a bug fix relating to allocating blocks after
  resizing an ext3 file system when using the ext4 file system driver"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
  ext4: revert "ext4: use io_end for multiple bios"
  ext4: limit group search loop for non-extent files
  ext4: fix fio regression
2013-05-14 09:30:54 -07:00
Theodore Ts'o a549984b8c ext4: revert "ext4: use io_end for multiple bios"
This reverts commit 4eec708d26.

Multiple users have reported crashes which is apparently caused by
this commit.  Thanks to Dmitry Monakhov for bisecting it.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
2013-05-11 19:07:42 -04:00
Linus Torvalds 5af43c24ca Merge branch 'akpm' (incoming from Andrew)
Merge more incoming from Andrew Morton:

 - Various fixes which were stalled or which I picked up recently

 - A large rotorooting of the AIO code.  Allegedly to improve
   performance but I don't really have good performance numbers (I might
   have lost the email) and I can't raise Kent today.  I held this out
   of 3.9 and we could give it another cycle if it's all too late/scary.

I ended up taking only the first two thirds of the AIO rotorooting.  I
left the percpu parts and the batch completion for later.  - Linus

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits)
  aio: don't include aio.h in sched.h
  aio: kill ki_retry
  aio: kill ki_key
  aio: give shared kioctx fields their own cachelines
  aio: kill struct aio_ring_info
  aio: kill batch allocation
  aio: change reqs_active to include unreaped completions
  aio: use cancellation list lazily
  aio: use flush_dcache_page()
  aio: make aio_read_evt() more efficient, convert to hrtimers
  wait: add wait_event_hrtimeout()
  aio: refcounting cleanup
  aio: make aio_put_req() lockless
  aio: do fget() after aio_get_req()
  aio: dprintk() -> pr_debug()
  aio: move private stuff out of aio.h
  aio: add kiocb_cancel()
  aio: kill return value of aio_complete()
  char: add aio_{read,write} to /dev/{null,zero}
  aio: remove retry-based AIO
  ...
2013-05-07 20:49:51 -07:00