This includes OpenCores I2C host controller, TI CDCE706 clock generator,
xtfpga I2S master controller, xtfpga SPI master controller, TI TLV320AIC23
audio codec and a simple audio card.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use the same offset from the default physical memory start address as in
LOAD_MEMORY_ADDRESS definition.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't hardcode kernel entry address as 0x3000 or 0xd0003000, use
LOAD_MEMORY_ADDRESS macro. Don't compile MMU remapping code and don't try
to link it when building noMMU configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This config allows running SMP-enabled bitstream on LX200 board.
NFS or FLASH rootfs, minimal debug, up to 4 cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Enable all memory available on KC705 (1G - 128M) by default. Update memory
node in DTS and also limit usable memory in bootargs in case memmap is
passed from the bootloader.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC
base frequency in the platform data in case of build w/o CONFIG_OF.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
With this change the board needs to set up single clock object, users of
this clock will get correct frequency automatically.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The recommended compatible string format, according to the ePAPR v1.1 standard,
is "manufacturer,model". Change the xtensa cpu compatible strings to
"cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way.
The pic compatible string will be dealt with in a separate patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Extract xtensa built-in interrupt controller implementation from
xtensa/kernel/irq.c and move it to other irqchips, providing way to
instantiate it from the device tree.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
-e is not needed to output strings without escape sequences. This breaks
big endian FSF build when the shell is dash, because its builtin echo
doesn't understand '-e' switch and outputs it in the echoed string.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
With the patch to support MMUv3, the base address for the loaded
binary image has changed, and a fix was applied to the U-Boot image.
This fixes the RedBoot image.
Signed-off-by: Chris Zankel <chris@zankel.net>
The current rules have the .dtb files build in a different directory
from the .dts files. This patch changes xtensa to use the generic dtb
rule which builds .dtb files in the same directory as the source .dts.
This requires moving parts of arch/xtensa/boot/Makefile into newly
created arch/xtensa/boot/dts/Makefile, and updating arch/xtensa/Makefile
to call the new Makefile.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60
and for ML605.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.
New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.
Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Max Filippov
Baruch Siach
Chris Zankel
Stephen Warren