32b8af82e3
perf stat: Introduce --per-thread option
...
Currently all the -p option PID arguments tasks values get aggregated
and printed as single values.
Adding --per-tasks option to print values per task.
$ perf stat -e cycles,instructions --per-thread -p 30190,30242
^C
Performance counter stats for process id '30190,30242':
cat-30190 0 cycles
yes-30242 3,842,525,421 cycles
cat-30190 0 instructions
yes-30242 10,370,817,010 instructions
1.143155657 seconds time elapsed
Also works under interval mode:
$ perf stat -e cycles,instructions --per-thread -p 30190,30242 -I 1000
# time comm-pid counts unit events
1.000073435 cat-30190 89,058 cycles
1.000073435 yes-30242 3,360,786,902 cycles (100.00%)
1.000073435 cat-30190 14,066 instructions
1.000073435 yes-30242 9,069,937,462 instructions
2.000204830 cat-30190 0 cycles
2.000204830 yes-30242 3,351,667,626 cycles
2.000204830 cat-30190 0 instructions
2.000204830 yes-30242 9,045,796,885 instructions
^C 2.771286639 cat-30190 0 cycles
2.771286639 yes-30242 2,593,884,166 cycles
2.771286639 cat-30190 0 instructions
2.771286639 yes-30242 7,001,171,191 instructions
It works only with -t and -p options, otherwise following error is
printed:
$ perf stat -e cycles --per-thread -I 1000 ls
The --per-thread option is only available when monitoring via -p -t options.
-p, --pid <pid> stat events on existing process id
-t, --tid <tid> stat events on existing thread id
Signed-off-by: Jiri Olsa <jolsa@kernel.org >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: Andi Kleen <ak@linux.intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1435310967-14570-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-06-26 12:05:04 -03:00
9d9cad763c
perf tools: Configurable per thread proc map processing time out
...
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com >
Cc: Andi Kleen <andi@firstfloor.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Ying Huang <ying.huang@intel.com >
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-06-19 18:27:13 -03:00
5610032135
perf record: Amend option summaries
...
Because there's too many options and I cannot read, I frequently get
confused between -c and -P, and try to do things like:
perf record -P 50000 -- foo
Which does not work; try and make the option description slightly longer
and hopefully less confusing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org >
Link: http://lkml.kernel.org/r/20150610144850.GP19282@twins.programming.kicks-ass.net
[ Do those changes on the man page as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-06-10 12:00:27 -03:00
1f91d5fd03
perf tools: Document relation of per-thread event count feature
...
The 'perf record -s' and 'perf report -T' should be used together to see
per-thread event counts. Document the relation of these commands.
Signed-off-by: Namhyung Kim <namhyung@kernel.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Link: http://lkml.kernel.org/r/1431184784-30525-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-12 09:59:48 -03:00
6cfd1f6805
perf probe: Add --no-inlines option to avoid searching inline functions
...
Add --no-inlines(--inlines) option to avoid searching inline functions.
Searching all functions which matches glob pattern can take a long time
and find a lot of inline functions.
With this option perf-probe searches target on the non-inlined
functions.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com >
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Link: http://lkml.kernel.org/r/20150508010333.24812.86568.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-08 16:26:44 -03:00
d65817b4e7
perf bench futex: Support parallel waker threads
...
The futex-wake benchmark only measures wakeups done within a single
process. While this has value in its own, it does not really generate
any hb->lock contention.
A new benchmark 'wake-parallel' is added, by extending the futex-wake
code such that we can measure parallel waker threads. The program output
shows the avg per-thread latency in order to complete its share of
wakeups:
Run summary [PID 13474]: blocking on 512 threads (at [private] futex 0xa88668), 8 threads waking up 64 at a time.
[Run 1]: Avg per-thread latency (waking 64/512 threads) in 0.6230 ms (+-15.31%)
[Run 2]: Avg per-thread latency (waking 64/512 threads) in 0.5175 ms (+-29.95%)
[Run 3]: Avg per-thread latency (waking 64/512 threads) in 0.7578 ms (+-18.03%)
[Run 4]: Avg per-thread latency (waking 64/512 threads) in 0.8944 ms (+-12.54%)
[Run 5]: Avg per-thread latency (waking 64/512 threads) in 1.1204 ms (+-23.85%)
Avg per-thread latency (waking 64/512 threads) in 0.7826 ms (+-9.91%)
Naturally, different combinations of numbers of blocking and waker
threads will exhibit different information.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: Davidlohr Bueso <dbueso@suse.de >
Link: http://lkml.kernel.org/r/1431110280-20231-1-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-08 16:23:50 -03:00
f8bffbf122
perf probe: Support $params special probe argument
...
$params is similar to $vars but matches only function parameters not
local variables.
Thus, this is useful for tracing function parameter changing or tracing
function call with parameters.
Testing it:
# perf probe tcp_sendmsg '$params'
Added new event:
probe:tcp_sendmsg (on tcp_sendmsg with $params)
You can now use it in all perf tools, such as:
perf record -e probe:tcp_sendmsg -aR sleep 1
# perf probe -l
probe:tcp_sendmsg (on tcp_sendmsg@acme/git/linux/net/ipv4/tcp.c with iocb sk msg size)
# perf record -a -e probe:*
press some random letters to generate TCP (sshd) traffic...
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.223 MB perf.data (6 samples) ]
# perf script
sshd 6385 [2] 3.907529: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
sshd 6385 [2] 4.138973: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
sshd 6385 [2] 4.378966: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
sshd 6385 [2] 4.603681: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
sshd 6385 [2] 4.818455: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
sshd 6385 [2] 5.043603: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
# cat /sys/kernel/debug/tracing/events/probe/tcp_sendmsg/format
name: tcp_sendmsg
ID: 1927
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:unsigned long __probe_ip; offset:8; size:8; signed:0;
field:u64 iocb; offset:16; size:8; signed:0;
field:u64 sk; offset:24; size:8; signed:0;
field:u64 msg; offset:32; size:8; signed:0;
field:u64 size; offset:40; size:8; signed:0;
print fmt: "(%lx) iocb=0x%Lx sk=0x%Lx msg=0x%Lx size=0x%Lx", REC->__probe_ip, REC->iocb, REC->sk, REC->msg, REC->size
#
Do some system wide tracing of this probe + write syscalls:
# perf trace -e write --ev probe:* --filter-pids 6385
462.612 (0.010 ms): bash/19153 write(fd: 1</dev/pts/1>, buf: 0x7f7556c78000, count: 29 ) = 29
462.701 (0.027 ms): sshd/19152 write(fd: 3<socket:[63117]>, buf: 0x7f78dd12e160, count: 68 ) ...
462.701 ( ): probe:tcp_sendmsg:(ffffffff8163db30) iocb=0xffff8803ebec7e70 sk=0xffff88042196ab80 msg=0xffff8803ebec7da8 size=0x44)
462.710 (0.035 ms): sshd/19152 ... [continued]: write()) = 68
462.787 (0.009 ms): bash/19153 write(fd: 2</dev/pts/1>, buf: 0x7f7556c77000, count: 22 ) = 22
462.865 (0.002 ms): sshd/19152 write(fd: 3<socket:[63117]>, buf: 0x7f78dd12e160, count: 68 ) ...
462.865 ( ): probe:tcp_sendmsg:(ffffffff8163db30) iocb=0xffff8803ebec7e70 sk=0xffff88042196ab80 msg=0xffff8803ebec7da8 size=0x44)
462.873 (0.010 ms): sshd/19152 ... [continued]: write()) = 68
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Link: http://lkml.kernel.org/r/20150506124653.4961.59806.stgit@localhost.localdomain
[ Add some examples to the changelog message showing how to use it ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-08 16:05:03 -03:00
9f7811d08d
perf probe: Accept filter argument for --funcs
...
This allows the user to pass the filter pattern directly to the --funcs
option as below:
----
# ./perf probe -F *kmalloc
__kmalloc
devm_kmalloc
mempool_kmalloc
sg_kmalloc
sock_kmalloc
----
We previously needed to use the --filter option for that.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Link: http://lkml.kernel.org/r/20150505022950.23399.22435.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-05 18:13:04 -03:00
2dd6d8a10a
perf record: Add AUX area tracing Snapshot Mode support
...
Add a new option and support for Instruction Tracing Snapshot Mode.
When the new option is selected, no AUX area tracing data is captured
until a signal (SIGUSR2) is received.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Acked-by: Jiri Olsa <jolsa@kernel.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1430404667-10593-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-05 18:13:01 -03:00
53c76b0e9e
perf auxtrace: Add option to synthesize events for transactions
...
Add AUX area tracing option 'x' to synthesize events for transactions.
This will be used by Intel PT to synthesize an event record for each TSX
start, commit or abort.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Acked-by: Jiri Olsa <jolsa@kernel.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1430404667-10593-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-05 18:12:55 -03:00
64a7e61f11
perf report: Fix placement of itrace option in documentation
...
Unwittingly the itrace options for perf report ended up below the
Overhead Calculation section. Move it back with the other options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1430404667-10593-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-04 19:47:11 -03:00
2a7ef02c9c
perf kmem: Add --live option for current allocation stat
...
Currently 'perf kmem stat --page' shows total (page) allocation stat by
default, but sometimes one might want to see live (total alloc-only)
requests/pages only. The new --live option does this by subtracting freed
allocation from the stat.
E.g.:
# perf kmem stat --page
SUMMARY (page allocator)
========================
Total allocation requests : 988,858 [ 4,045,368 KB ]
Total free requests : 886,484 [ 3,624,996 KB ]
Total alloc+freed requests : 885,969 [ 3,622,628 KB ]
Total alloc-only requests : 102,889 [ 422,740 KB ]
Total free-only requests : 515 [ 2,368 KB ]
Total allocation failures : 0 [ 0 KB ]
Order Unmovable Reclaimable Movable Reserved CMA/Isolated
----- ------------ ------------ ------------ ------------ ------------
0 172,173 3,083 806,686 . .
1 284 . . . .
2 6,124 58 . . .
3 114 335 . . .
4 . . . . .
5 . . . . .
6 . . . . .
7 . . . . .
8 . . . . .
9 . . 1 . .
10 . . . . .
# perf kmem stat --page --live
SUMMARY (page allocator)
========================
Total allocation requests : 988,858 [ 4,045,368 KB ]
Total free requests : 886,484 [ 3,624,996 KB ]
Total alloc+freed requests : 885,969 [ 3,622,628 KB ]
Total alloc-only requests : 102,889 [ 422,740 KB ]
Total free-only requests : 515 [ 2,368 KB ]
Total allocation failures : 0 [ 0 KB ]
Order Unmovable Reclaimable Movable Reserved CMA/Isolated
----- ------------ ------------ ------------ ------------ ------------
0 2,214 3,025 97,156 . .
1 59 . . . .
2 19 58 . . .
3 23 335 . . .
4 . . . . .
5 . . . . .
6 . . . . .
7 . . . . .
8 . . . . .
9 . . . . .
10 . . . . .
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org >
Acked-by: Pekka Enberg <penberg@kernel.org >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Joonsoo Kim <js1304@gmail.com >
Cc: Minchan Kim <minchan@kernel.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1429592107-1807-4-git-send-email-namhyung@kernel.org
[ Added examples to the changeset log ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-04 13:34:47 -03:00
fb4f313d30
perf kmem: Support sort keys on page analysis
...
Add new sort keys for page: page, order, migtype, gfp - existing
'bytes', 'hit' and 'callsite' sort keys also work for page. Note that
-s/--sort option should be preceded by either of --slab or --page option
to determine where the sort keys applies.
Now it properly groups and sorts allocation stats - so same
page/caller with different order/migtype/gfp will be printed on a
different line.
# perf kmem stat --page --caller -l 10 -s order,hit
-----------------------------------------------------------------------------
Total alloc (KB) | Hits | Order | Mig.type | GFP flags | Callsite
-----------------------------------------------------------------------------
64 | 4 | 2 | RECLAIM | 00285250 | new_slab
50,144 | 12,536 | 0 | MOVABLE | 0102005a | __page_cache_alloc
52 | 13 | 0 | UNMOVABL | 002084d0 | pte_alloc_one
40 | 10 | 0 | MOVABLE | 000280da | handle_mm_fault
28 | 7 | 0 | UNMOVABL | 000000d0 | __pollwait
20 | 5 | 0 | MOVABLE | 000200da | do_wp_page
20 | 5 | 0 | MOVABLE | 000200da | do_cow_fault
16 | 4 | 0 | UNMOVABL | 00000200 | __tlb_remove_page
16 | 4 | 0 | UNMOVABL | 000084d0 | __pmd_alloc
8 | 2 | 0 | UNMOVABL | 000084d0 | __pud_alloc
... | ... | ... | ... | ... | ...
-----------------------------------------------------------------------------
Signed-off-by: Namhyung Kim <namhyung@kernel.org >
Acked-by: Pekka Enberg <penberg@kernel.org >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Joonsoo Kim <js1304@gmail.com >
Cc: Minchan Kim <minchan@kernel.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1429592107-1807-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-04 13:34:47 -03:00
b6a896438b
perf probe: Accept filter argument for --list
...
Currently, perf-probe --list option ignores given event filter.
----
# ./perf probe -l vfs\*
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so)
----
This changes --list option to accept the event filter argument as below.
----
# ./perf probe -l vfs\*
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
# ./perf probe -l \*libc:\*
probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Link: http://lkml.kernel.org/r/20150424094750.23967.53868.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-04 12:43:56 -03:00
520a2ebc2f
perf report: Add Instruction Tracing support
...
Add support for decoding an AUX area assuming it contains instruction
tracing data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1429903807-20559-4-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
[ Fixed initialization of itrace_synth_opts struct fields on older gcc versions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-05-04 12:43:50 -03:00
dd3092075c
perf tools: Document --children option in more detail
...
As the --children option changes the output of perf report (and perf
top) it sometimes confuses users. Add more words and examples to help
understanding of the option's behavior - and how to disable it ;-).
Signed-off-by: Namhyung Kim <namhyung@kernel.org >
Reviewed-by: Ingo Molnar <mingo@kernel.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: Taeung Song <treeze.taeung@gmail.com >
Link: http://lkml.kernel.org/r/1429684425-14987-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:38:06 -03:00
d303e85a5c
perf trace: Clarify that -e is about syscalls, not perf events in general
...
This comes from the desire of having -e/--expr to have the same meaning
as for 'strace', while other perf tools use it for --event, which
'trace' honours, i.e. all perf tools have --event in common, but trace
uses -e for strace's --expr.
Clarify it in the --help output.
Reported-by: David Ahern <dsahern@gmail.com >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: Borislav Petkov <bp@suse.de >
Cc: Don Zickus <dzickus@redhat.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/n/tip-5j94bcsdmcbeu2xthnzsj60d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:38:04 -03:00
b3ac032b7a
perf probe: Make --funcs option exclusive
...
The --funcs option should be given exclusively. This adds
PARSE_OPT_EXCUSIVE flag on --funcs (-F) option.
Without this, 'perf probe --funcs -l' just shows the list of probes.
With this, it shows error message correctly.
This also fixes the help message and the documentation.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Peter Zijlstra <peterz@infradead.org >
Link: http://lkml.kernel.org/r/20150423134612.26128.58189.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:38:02 -03:00
400ea6d327
perf script: Add field option 'flags' to print sample flags
...
Instruction tracing will typically have access to information about the
instruction being executed for a particular ip sample. Some of that
information will be available in the 'flags' member of struct
perf_sample.
With the addition of transactions events synthesis to Instruction
Tracing options, there is a need to be able easily to see the flags
because they show whether the ip is at the start, commit or abort of a
tranasaction.
Consequently add an option to display the flags.
The flags are "bcrosyiABEx" which stand for branch, call, return,
conditional, system, asynchronous, interrupt, transaction abort, trace
begin, trace end, and in transaction, respectively.
Example using Intel PT:
perf script -fip,time,event,sym,addr,flags
...
1288.721584105: branches:u: bo 401146 main => 401152 main
1288.721584105: transactions: x 0 401164 main
1288.721584105: branches:u: bx 40117c main => 40119b main
1288.721584105: branches:u: box 4011a4 main => 40117e main
1288.721584105: branches:u: bcx 401187 main => 401094 g
...
1288.721591645: branches:u: bx 4010c4 g => 4010cb g
1288.721591645: branches:u: brx 4010cc g => 401189 main
1288.721591645: transactions: 0 4011a6 main
1288.721593199: branches:u: b 4011a9 main => 4011af main
1288.721593199: branches:u: bo 4011bc main => 40113e main
1288.721593199: branches:u: b 401150 main => 40115a main
1288.721593199: transactions: x 0 401164 main
1288.721593199: branches:u: bx 40117c main => 40119b main
1288.721593199: branches:u: box 4011a4 main => 40117e main
1288.721593199: branches:u: bcx 401187 main => 40105e f
...
1288.722284747: branches:u: brx 401093 f => 401189 main
1288.722284747: branches:u: box 4011a4 main => 40117e main
1288.722284747: branches:u: bcx 401187 main => 40105e f
1288.722285883: transactions: bA 0 401071 f
1288.722285883: branches:u: bA 401071 f => 40116a main
1288.722285883: branches:u: bE 40116a main => 0 [unknown]
1288.722297174: branches:u: bB 0 [unknown] => 40116a main
...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1428594864-29309-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:37:57 -03:00
0f0aa5e069
perf inject: Add Instruction Tracing support
...
Add support for decoding an AUX area assuming it contains instruction
tracing data. The AUX area tracing events are stripped and replaced by
synthesized events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1428594864-29309-21-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:37:57 -03:00
7a680eb990
perf script: Add Instruction Tracing support
...
Add support for decoding an AUX area assuming it contains instruction
tracing data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1428594864-29309-17-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
[ Fixed initialization of itrace_synth_opts struct fields on older gcc versions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:37:56 -03:00
e9db1310d9
perf record: Extend -m option for AUX area tracing mmap pages
...
Extend the -m option so that the number of mmap pages for AUX area
tracing can be specified by adding a comma followed by the number of
pages.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com >
Acked-by: Jiri Olsa <jolsa@kernel.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Frederic Weisbecker <fweisbec@gmail.com >
Cc: Namhyung Kim <namhyung@gmail.com >
Cc: Peter Zijlstra <peterz@infradead.org >
Cc: Stephane Eranian <eranian@google.com >
Link: http://lkml.kernel.org/r/1428594864-29309-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-29 10:37:52 -03:00
0d68bc92c4
perf kmem: Analyze page allocator events also
...
The perf kmem command records and analyze kernel memory allocation only
for SLAB objects. This patch implement a simple page allocator analyzer
using kmem:mm_page_alloc and kmem:mm_page_free events.
It adds two new options of --slab and --page. The --slab option is for
analyzing SLAB allocator and that's what perf kmem currently does.
The new --page option enables page allocator events and analyze kernel
memory usage in page unit. Currently, 'stat --alloc' subcommand is
implemented only.
If none of these --slab nor --page is specified, --slab is implied.
First run 'perf kmem record' to generate a suitable perf.data file:
# perf kmem record --page sleep 5
Then run 'perf kmem stat' to postprocess the perf.data file:
# perf kmem stat --page --alloc --line 10
-------------------------------------------------------------------------------
PFN | Total alloc (KB) | Hits | Order | Mig.type | GFP flags
-------------------------------------------------------------------------------
4045014 | 16 | 1 | 2 | RECLAIM | 00285250
4143980 | 16 | 1 | 2 | RECLAIM | 00285250
3938658 | 16 | 1 | 2 | RECLAIM | 00285250
4045400 | 16 | 1 | 2 | RECLAIM | 00285250
3568708 | 16 | 1 | 2 | RECLAIM | 00285250
3729824 | 16 | 1 | 2 | RECLAIM | 00285250
3657210 | 16 | 1 | 2 | RECLAIM | 00285250
4120750namhyung@kernel.org >
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com >
Cc: David Ahern <dsahern@gmail.com >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: Joonsoo Kim <js1304@gmail.com >
Cc: Minchan Kim <minchan@kernel.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-13 11:44:52 -03:00
a1e12da479
perf tools: Add 'I' event modifier for exclude_idle bit
...
Adding 'I' event modifier to have complete set of modifiers for
perf_event_attr:exclude_* bits.
Any event specified with 'I' modifier will have the
perf_event_attr:exclude_idle bit set.
$ perf record -e cycles:I -vv ls 2>&1 | grep exclude_idle
exclude_hv 0 exclude_idle 1
Adding automated tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org >
Cc: Andi Kleen <andi@firstfloor.org >
Cc: David Ahern <dsahern@gmail.com >
Cc: Namhyung Kim <namhyung@kernel.org >
Cc: Paul Mackerras <paulus@samba.org >
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl >
Cc: William Cohen <wcohen@redhat.com >
Link: http://lkml.kernel.org/r/1428441919-23099-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-08 11:00:16 -03:00
814c8c38e1
perf record: Add clockid parameter
...
Teach perf-record about the new perf_event_attr::{use_clockid, clockid}
fields. Add a simple parameter to set the clock (if any) to be used for
the events to be recorded into the data file.
Since we store the entire perf_event_attr in the EVENT_DESC section we
also already store the used clockid in the data file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org >
Acked-by: David Ahern <dsahern@gmail.com >
Cc: "H. Peter Anvin" <hpa@zytor.com >
Cc: Adrian Hunter <adrian.hunter@intel.com >
Cc: Andrew Morton <akpm@linux-foundation.org >
Cc: Jiri Olsa <jolsa@redhat.com >
Cc: John Stultz <john.stultz@linaro.org >
Cc: Linus Torvalds <torvalds@linux-foundation.org >
Cc: Stephane Eranian <eranian@google.com >
Cc: Thomas Gleixner <tglx@linutronix.de >
Cc: Yunlong Song <yunlong.song@huawei.com >
Link: http://lkml.kernel.org/r/20150407154851.GR23123@twins.programming.kicks-ass.net
[ Conditionally define CLOCK_BOOTTIME, at least rhel6 doesn't have it - dsahern
Ditto for CLOCK_MONOTONIC_RAW, sles11sp2 doesn't have it - yunlong.song ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com >
2015-04-08 10:04:55 -03:00
Jiri Olsa
Kan Liang
Peter Zijlstra
Namhyung Kim
Masami Hiramatsu
Davidlohr Bueso
Adrian Hunter
Arnaldo Carvalho de Melo